Eicon Diva und Trixbox - keine ausgehenden Anrufe möglich

Toggle sidebar Toggle sidebar
Upgrade 3CX to v18 and get it hosted free!
L

Laechler

Neuer User
Mitglied seit
30 Jul 2005
Beiträge
25
Punkte für Reaktionen
0
Punkte
0
Hallo zusammen,
beim Versuch eine Verbindung nach draussen, Amtsleitung, herzustellen, erhalte ich mit den Einstellungen verbose=10, debug=10 und capi debug:
Code: 
 -- Executing Dial("SIP/5-2d97", "CAPI/g1/0123456789") in new stack
       > data = g1/0123456789 format=8
       > parsed dialstring: 'g1' 'NULL' '0123456789' ''
       > capi request group = 2
  == ISDN1#02: setting format alaw - 0x8 (alaw)
       > parsed dialstring: 'g1' 'NULL' '0123456789' ''
  == ISDN1#02: Call CAPI/ISDN1/0123456789-9   (pres=0x00, ton=0x00)
CONNECT_REQ ID=001 #0x0013 LEN=0058
  Controller/PLCI/NCCI            = 0x1
  CIPValue                        = 0x1
  CalledPartyNumber               = <80>0123456789
  CallingPartyNumber              = <00 80>200340
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

    -- Called g1/0123456789
       > CAPI devicestate requested for ISDN1/0123456789
       > CAPI devicestate requested for ISDN1/0123456789
CONNECT_CONF ID=001 #0x0013 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Info                            = 0x0

    -- ISDN1#02: received CONNECT_CONF PLCI = 0x301
INFO_IND ID=001 #0x001e LEN=0015
  Controller/PLCI/NCCI            = 0x301
  InfoNumber                      = 0x804d
  InfoElement                     = default

INFO_RESP ID=001 #0x001e LEN=0012
  Controller/PLCI/NCCI            = 0x301

    -- ISDN1#02: info element RELEASE
DISCONNECT_IND ID=001 #0x0020 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Reason                          = 0x3490

DISCONNECT_RESP ID=001 #0x0020 LEN=0012
  Controller/PLCI/NCCI            = 0x301

       > ISDN1#02: CAPI INFO 0x3490: Normal call clearing
    -- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN1#02]
  == ISDN1#02: CAPI Hangingup for PLCI=0x301 in state 4
  == ISDN1#02: Interface cleanup PLCI=0x301
  == No one is available to answer at this time (1:0/0/0)

Die Auswertungen am Webinterface der Karte zeigen an:
(adapter xlog1.cgi)
Code: 
    0:2130:252 - D-X(008) FE FF 03 0F 00 00 06 01
    0:2131:253 - D-R(008) FE FF 03 0F 00 00 04 01
    0:2131:772 - IPACX: invalid frame

meine capi.conf sieht so aus:
Code: 
    -- ISDN1#02: info element RELEASE
DISCONNECT_IND ID=001 #0x0020 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Reason                          = 0x3490

DISCONNECT_RESP ID=001 #0x0020 LEN=0012
  Controller/PLCI/NCCI            = 0x301

       > ISDN1#02: CAPI INFO 0x3490: Normal call clearing
    -- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN1#02]
  == ISDN1#02: CAPI Hangingup for PLCI=0x301 in state 4
  == ISDN1#02: Interface cleanup PLCI=0x301
  == No one is available to answer at this time (1:0/0/0)
    -- Executing Goto("SIP/5-2d97", "s-NOANSWER|1") in new stack
    -- Goto (macro-dialout-trunk,s-NOANSWER,1)
    -- Executing NoOp("SIP/5-2d97", "Dial failed due to NOANSWER") in new stack
    -- Executing Macro("SIP/5-2d97", "outisbusy|") in new stack
    -- Executing Playback("SIP/5-2d97", "all-circuits-busy-now") in new stack
       > CAPI devicestate requested for ISDN1/05531990570
       > CAPI devicestate requested for ISDN1/05531990570
    -- Playing 'all-circuits-busy-now' (language 'en')
    -- Executing Playback("SIP/5-2d97", "pls-try-call-later") in new stack
    -- Playing 'pls-try-call-later' (language 'en')
    -- Executing Macro("SIP/5-d269", "dialout-trunk|2|005532983850||") in new stack
    -- Executing GotoIf("SIP/5-d269", "1?3:2") in new stack
    -- Goto (macro-dialout-trunk,s,3)
    -- Executing Macro("SIP/5-d269", "user-callerid") in new stack
    -- Executing Set("SIP/5-d269", "AMPUSER=0") in new stack
    -- Executing Set("SIP/5-d269", "EMERGENCYCID=") in new stack
    -- Executing Set("SIP/5-d269", "AMPUSERCIDNAME=Zentrale") in new stack
    -- Executing GotoIf("SIP/5-d269", "0?6") in new stack
    -- Executing Set("SIP/5-d269", "CALLERID(all)="Zentrale" <0>") in new stack
    -- Executing NoOp("SIP/5-d269", "Using CallerID "Zentrale" <0>") in new stack
    -- Executing Macro("SIP/5-d269", "record-enable|0|OUT") in new stack
    -- Executing GotoIf("SIP/5-d269", "0 > 0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing AGI("SIP/5-d269", "recordingcheck|20070219-155620|1171896980.21") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20070219-155620|1171896980.21: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing NoOp("SIP/5-d269", "No recording needed") in new stack
    -- Executing Macro("SIP/5-d269", "outbound-callerid|2") in new stack
    -- Executing Set("SIP/5-d269", "USEROUTCID=200340") in new stack
    -- Executing GotoIf("SIP/5-d269", "0?4") in new stack
    -- Executing Set("SIP/5-d269", "CALLERID(all)=Rossmayer Consulting 05564200340") in new stack
    -- Executing GotoIf("SIP/5-d269", "0?6") in new stack
    -- Executing Set("SIP/5-d269", "CALLERID(all)=200340") in new stack
    -- Executing GotoIf("SIP/5-d269", "1?8") in new stack
    -- Goto (macro-outbound-callerid,s,8)
    -- Executing NoOp("SIP/5-d269", "CallerID set to "" <200340>") in new stack
    -- Executing Set("SIP/5-d269", "GROUP()=OUT_2") in new stack
    -- Executing GotoIf("SIP/5-d269", "0?108") in new stack
    -- Executing Set("SIP/5-d269", "DIAL_NUMBER=005532983850") in new stack
    -- Executing Set("SIP/5-d269", "DIAL_TRUNK=2") in new stack
    -- Executing AGI("SIP/5-d269", "fixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
  fixlocalprefix: Removed prefix. New number: 05532983850
    -- AGI Script fixlocalprefix completed, returning 0
    -- Executing Set("SIP/5-d269", "OUTNUM=05532983850") in new stack
    -- Executing Set("SIP/5-d269", "custom=AMP") in new stack
    -- Executing GotoIf("SIP/5-d269", "1?16") in new stack
    -- Goto (macro-dialout-trunk,s,16)
    -- Executing Set("SIP/5-d269", "pre_num=AMP:CAPI/g1/") in new stack
    -- Executing Set("SIP/5-d269", "the_num=OUTNUM") in new stack
    -- Executing Set("SIP/5-d269", "post_num=") in new stack
    -- Executing GotoIf("SIP/5-d269", "1?20:21") in new stack
    -- Goto (macro-dialout-trunk,s,20)
    -- Executing Set("SIP/5-d269", "the_num=05532983850") in new stack
    -- Executing Dial("SIP/5-d269", "CAPI/g1/05532983850") in new stack
       > data = g1/05532983850 format=8
       > parsed dialstring: 'g1' 'NULL' '05532983850' ''
       > capi request group = 2
  == ISDN1#02: setting format alaw - 0x8 (alaw)
       > CAPI devicestate requested for ISDN1/05532983850
       > parsed dialstring: 'g1' 'NULL' '05532983850' ''
  == ISDN1#02: Call CAPI/ISDN1/05532983850-a   (pres=0x00, ton=0x00)
       > CAPI devicestate requested for ISDN1/05532983850
CONNECT_REQ ID=001 #0x0014 LEN=0058
  Controller/PLCI/NCCI            = 0x1
  CIPValue                        = 0x1
  CalledPartyNumber               = <80>05532983850
  CallingPartyNumber              = <00 80>200340
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

    -- Called g1/05532983850
CONNECT_CONF ID=001 #0x0014 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Info                            = 0x0

    -- ISDN1#02: received CONNECT_CONF PLCI = 0x301
INFO_IND ID=001 #0x0021 LEN=0015
  Controller/PLCI/NCCI            = 0x301
  InfoNumber                      = 0x804d
  InfoElement                     = default

INFO_RESP ID=001 #0x0021 LEN=0012
  Controller/PLCI/NCCI            = 0x301

    -- ISDN1#02: info element RELEASE
DISCONNECT_IND ID=001 #0x0023 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Reason                          = 0x3490

DISCONNECT_RESP ID=001 #0x0023 LEN=0012
  Controller/PLCI/NCCI            = 0x301

       > ISDN1#02: CAPI INFO 0x3490: Normal call clearing
    -- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN1#02]
  == ISDN1#02: CAPI Hangingup for PLCI=0x301 in state 4
  == ISDN1#02: Interface cleanup PLCI=0x301
  == No one is available to answer at this time (1:0/0/0)
    -- Executing Goto("SIP/5-d269", "s-NOANSWER|1") in new stack
    -- Goto (macro-dialout-trunk,s-NOANSWER,1)
    -- Executing NoOp("SIP/5-d269", "Dial failed due to NOANSWER") in new stack
    -- Executing Macro("SIP/5-d269", "outisbusy|") in new stack
    -- Executing Playback("SIP/5-d269", "all-circuits-busy-now") in new stack
    -- Playing 'all-circuits-busy-now' (language 'en')
       > CAPI devicestate requested for ISDN1/05532983850
       > CAPI devicestate requested for ISDN1/05532983850
asterisk1*CLI> CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN1#02] -- Executing Dial("SIP/5-2d97", "CAPI/g1/05531990570") in new stack
No such command 'CAPI queue' (type 'help' for help)
asterisk1*CLI>        > data = g1/05531990570 format=8
No such command '>' (type 'help' for help)
asterisk1*CLI>        > parsed dialstring: 'g1' 'NULL' '05531990570' ''
No such command '>' (type 'help' for help)
asterisk1*CLI>        > capi request group = 2
No such command '>' (type 'help' for help)
asterisk1*CLI>   == ISDN1#02: setting format alaw - 0x8 (alaw)
No such command '==' (type 'help' for help)
asterisk1*CLI>        > parsed dialstring: 'g1' 'NULL' '05531990570' ''
No such command '>' (type 'help' for help)
asterisk1*CLI>   == ISDN1#02: Call CAPI/ISDN1/05531990570-9   (pres=0x00, ton=0x00)
No such command '==' (type 'help' for help)
asterisk1*CLI> CONNECT_REQ ID=001 #0x0013 LEN=0058
No such command 'CONNECT_REQ' (type 'help' for help)
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x1
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
asterisk1*CLI>   CIPValue                        = 0x1
No such command 'CIPValue' (type 'help' for help)
asterisk1*CLI>   CalledPartyNumber               = <80>05531990570
No such command 'CalledPartyNumber' (type 'help' for help)
asterisk1*CLI>   CallingPartyNumber              = <00 80>200340
No such command 'CallingPartyNumber' (type 'help' for help)
asterisk1*CLI>   CalledPartySubaddress           = default
No such command 'CalledPartySubaddress' (type 'help' for help)
asterisk1*CLI>   CallingPartySubaddress          = default
No such command 'CallingPartySubaddress' (type 'help' for help)
asterisk1*CLI>   BProtocol
No such command 'BProtocol' (type 'help' for help)
asterisk1*CLI>    B1protocol                     = 0x1
No such command 'B1protocol' (type 'help' for help)
asterisk1*CLI>    B2protocol                     = 0x1
No such command 'B2protocol' (type 'help' for help)
asterisk1*CLI>    B3protocol                     = 0x0
No such command 'B3protocol' (type 'help' for help)
asterisk1*CLI>    B1configuration                = default
No such command 'B1configuration' (type 'help' for help)
asterisk1*CLI>    B2configuration                = default
No such command 'B2configuration' (type 'help' for help)
asterisk1*CLI>    B3configuration                = default
No such command 'B3configuration' (type 'help' for help)
asterisk1*CLI>   BC                              = default
No such command 'BC' (type 'help' for help)
asterisk1*CLI>   LLC                             = default
No such command 'LLC' (type 'help' for help)
asterisk1*CLI>   HLC                             = default
No such command 'HLC' (type 'help' for help)
asterisk1*CLI>   AdditionalInfo
No such command 'AdditionalInfo' (type 'help' for help)
asterisk1*CLI>    BChannelinformation            = <00 00>
No such command 'BChannelinformation' (type 'help' for help)
asterisk1*CLI>    Keypadfacility                 = default
No such command 'Keypadfacility' (type 'help' for help)
asterisk1*CLI>    Useruserdata                   = default
No such command 'Useruserdata' (type 'help' for help)
asterisk1*CLI>    Facilitydataarray              = default
No such command 'Facilitydataarray' (type 'help' for help)
asterisk1*CLI>
asterisk1*CLI>     -- Called g1/05531990570
No such command '--' (type 'help' for help)
asterisk1*CLI>        > CAPI devicestate requested for ISDN1/05531990570
No such command '>' (type 'help' for help)
asterisk1*CLI>        > CAPI devicestate requested for ISDN1/05531990570
No such command '>' (type 'help' for help)
asterisk1*CLI> CONNECT_CONF ID=001 #0x0013 LEN=0014
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
asterisk1*CLI>   Info                            = 0x0
asterisk1*CLI>
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
    -- ISDN1#02: received CONNECT_CONF PLCI = 0x301
asterisk1*CLI> INFO_IND ID=001 #0x001e LEN=0015
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
asterisk1*CLI>   InfoNumber                      = 0x804d
asterisk1*CLI>
  InfoElement                     = default
asterisk1*CLI>
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
INFO_RESP ID=001 #0x001e LEN=0012
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
asterisk1*CLI>
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
    -- ISDN1#02: info element RELEASE
asterisk1*CLI> DISCONNECT_IND ID=001 #0x0020 LEN=0014
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
asterisk1*CLI>   Reason                          = 0x3490
asterisk1*CLI>
asterisk1*CLI>   == No one is available to answer at this time (1:0/0/0)
DISCONNECT_RESP ID=001 #0x0020 LEN=0012
asterisk1*CLI>   Controller/PLCI/NCCI            = 0x301
asterisk1*CLI>
asterisk1*CLI>        > ISDN1#02: CAPI INFO 0x3490: Normal call clearing
asterisk1*CLI>     -- CAPI queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN1#02]
asterisk1*CLI>   == ISDN1#02: CAPI Hangingup for PLCI=0x301 in state 4
asterisk1*CLI>   == ISDN1#02: Interface cleanup PLCI=0x301
asterisk1*CLI>   == No one is available to answer at this time (1:0/0/0)
No such command 'CONNECT_CONF' (type 'help' for help)
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
No such command 'Info' (type 'help' for help)
No such command '--' (type 'help' for help)
No such command 'INFO_IND' (type 'help' for help)
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
No such command 'InfoNumber' (type 'help' for help)
No such command 'InfoElement' (type 'help' for help)
No such command 'INFO_RESP' (type 'help' for help)
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
No such command '--' (type 'help' for help)
No such command 'DISCONNECT_IND' (type 'help' for help)
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
No such command 'Reason' (type 'help' for help)
No such command 'DISCONNECT_RESP' (type 'help' for help)
No such command 'Controller/PLCI/NCCI' (type 'help' for help)
No such command '>' (type 'help' for help)
No such command '--' (type 'help' for help)
No such command '==' (type 'help' for help)
No such command '==' (type 'help' for help)
No such command '==' (type 'help' for help)
asterisk1*CLI> vi capi.conf
No such command 'vi' (type 'help' for help)
asterisk1*CLI> exit
Executing last minute cleanups
[root@asterisk1 asterisk]# vi capi.conf
;
; CAPI config
;
;

; general section

[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
language=de      ;set default language
;ulaw=yes        ;set this, if you live in u-law world instead of a-law

; interface sections ...

[ISDN1]          ;this example interface gets name 'ISDN1' and may be any
                 ;name not starting with 'g' or 'contr'.
                 ;Use one interface section for each isdn port!
ntmode=yes       ;if isdn card operates in nt mode, set this to yes
isdnmode=DID     ;when using NT-mode, 'DID' should be set in any case
incomingmsn=*    ;allow incoming calls to this list of MSNs/DIDs, * = any
;defaultcid=123  ;set a default caller id to that interface for dial-out,
                 ;this caller id will be used when dial option 'd' is set.
;controller=0    ;ISDN4BSD default
;controller=7    ;ISDN4BSD USB default
controller=1     ;capi controller number of this interface/port
group=1          ;dialout group
;prefix=0        ;set a prefix to calling number on incoming calls
softdtmf=on      ;enable/disable software dtmf detection, recommended for AVM cards
relaxdtmf=on     ;in addition to softdtmf, you can use relaxed dtmf detection
faxdetect=off    ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or
                 ;outgoing calls. (default='off', possible values: 'incoming','outgoing','both')
accountcode=     ;PBX accountcode to use in CDRs
;amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or 'documentation')
context=capi-in  ;context for incoming calls
;holdtype=hold   ;when the PBX puts the call on hold, ISDN HOLD will be used. If
                 ;set to 'local' (default value), no hold is done and the PBX may
                 ;play MOH.
;immediate=yes   ;DID: immediate start of pbx with extension 's' if no digits were
                 ;     received on incoming call (no destination number yet)
                 ;MSN: start pbx on CONNECT_IND and don't wait for SETUP/SENDING-COMPLETE.
                 ;     info like REDIRECTINGNUMBER may be lost, but this is necessary for
                 ;     drivers/pbx/telco which does not send SETUP or SENDING-COMPLETE.
echosquelch=1   ;_VERY_PRIMITIVE_ echo suppression
echocancel=yes  ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165)
                 ;(possible values: 'no', 'yes', 'force', 'g164', 'g165')
;echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers)
echotail=64     ;echo cancel tail setting (default=0 for maximum)
;echocancelnlp=1 ;activate non-linear-processing; this improves echo cancel ratio, but might
                 ;incorporate variable gain in the signal path.
bridge=yes      ;native bridging (CAPI line interconnect) if available
;callgroup=1     ;PBX call group
;pickupgroup=1   ;PBX pickup group (which call groups are we allowed to pickup)
;language=de     ;set language for this device (overwrites default language)
;disallow=all    ;RTP codec selection (valid with Eicon DIVA Server only)
allow=all       ;RTP codec selection (valid with Eicon DIVA Server only)
"capi.conf" 62L, 3265C

Was kann ich machen? Ich bin für jede Hilfe dankbar.
 
Um antworten zu können musst du eingeloggt sein.
Kostenlos!
Jetzt holen

Neueste Beiträge

Kategorien

Wissenswertes

Zurzeit aktive Besucher

Gesamt: 323 (Mitglieder: 1, Gäste: 322)

Statistik des Forums

Themen
248,369
Beiträge
2,289,404
Mitglieder
377,694
Neuestes Mitglied
Humand613

3CX jetzt einen Monat kostenlos testen

Die Verbindung, Zusammenarbeit und Kommunikation mit Ihrem Team und Ihren Kunden war noch nie so einfach. Nutzen Sie unsere kostenlose 30-Tage-Testversion und entdecken Sie die richtige Lösung für Ihr Unternehmen.

3CX start your free trial guy
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten