[Frage] Erklärung der einzelnen VPN Einstellungen in der CFG Datei gesucht

[tily]

Hallo,

mein Fritz-VPN läuft soweit gut. Ich suche deshalb kein Tutorial zum Einrichten.

Aber: Ich wüsste gerne wozu die einzelnen Code Zeilen in der CFG Datei gut sind.

z.B.: local_virtualip
oder phase2localid

Kann man das irgendwo nachlesen?

 

[tily]

Hier mal eine Liste mit den verschiedenen IKE-Fehlermeldungen der Fritzbox

IKE-Fehlermeldungen der Fritzbox
IKE-Error 0x200A	"invalid exchange type"
IKE-Error 0x200B	"exchange type not supported"
IKE-Error 0x200C	"invalid major version"
IKE-Error 0x200D	"invalid minor version"
IKE-Error 0x200E	"invalid protocol version"
IKE-Error 0x000F	"payloads not encrypted"
IKE-Error 0x0010	"payloads are encrypted"
IKE-Error 0x0011	"invalid cookie"
IKE-Error 0x0012	"wrong initiator cookie"
IKE-Error 0x0013	"wrong responder cookie"
IKE-Error 0x0014	"invalid payload type"
IKE-Error 0x0015	"invalid msg id type"
IKE-Error 0x0016	"invalid protocol id type"
IKE-Error 0x0017	"invalid spi"
IKE-Error 0x0018	"invalid doi"
IKE-Error 0x0019	"unexpected value"
IKE-Error 0x001A	"invalid key size"
IKE-Error 0x001B	"payload malformed"
IKE-Error 0x001C	"invalid id"
IKE-Error 0x001D	"invalid transform id"
IKE-Error 0x001E	"unexpected next payload"
IKE-Error 0x001F	"missing payload"
IKE-Error 0x2020	"hash mismatch in received packet"
IKE-Error 0x2021	"invalid hash on send"
IKE-Error 0x2022	"auth method not supported"
IKE-Error 0x2023	"attribute not supported"
IKE-Error 0x1024	"dh key generation failed"
IKE-Error 0x1025	"error in crypto module"
IKE-Error 0x2026	"no proposal chosen"
IKE-Error 0x2027	"timeout"
IKE-Error 0x1028	"quickmode: no isakmp sa"
IKE-Error 0x0029	"info message without spi"
IKE-Error 0x202A	"certificate not available"
IKE-Error 0x202B	"id type not supported"
IKE-Error 0x202C	"dns: host/domain not found"
IKE-Error 0x202D	"dns: timeout"
IKE-Error 0x202E	"dns: unspecified error"
IKE-Error 0x2031	"unspecified error"
IKE-Error 0x2032	"xauth failed"
IKE-Error 0x2033	"xauth authentication failed received"
IKE-Error 0x2034	"attribute of unknown type received"
IKE-Error 0x1035	"peers xauth reply contained not all requested values"
IKE-Error 0x2036	"request for unsupported xauth type received"
IKE-Error 0x2037	"request attribute not available"
IKE-Error 0x2038	"xauth failed, reason: timeout"
IKE-Error 0x2039	"config mode failed, reason: timeout"
IKE-Error 0x203A	"timeout while waiting for initial config mode packet"
IKE-Error 0x203B	"timeout while waiting for initial xauth packet"
IKE-Error 0x203C	"config mode reply msg incomplete"
IKE-Error 0x203D	"phase 1 sa removed during negotiation"
IKE-Error 0x203E	"phase 1 aborted, ip address of neighbour has changed"
IKE-Error 0x203F	"authentication failed"
IKE-Error 0x2040	"invalid hash"