Hi 
apologies for writing in English (my written German is terrible).
I am in the process of trying to replace my Speedtouch 510 (stable router) with a FBF7170. The 7170 is reporting the following :
i.e. I have a connection for approx 1 minute before the 7170 thinks there is a dsl-sync problem.
When the connection is there I see the following within the ADSL info :
My internet settings are :
"Zugangsdaten werden benötigt (PPPoE/PPPoA-Zugang)" (with correct username/passwd)
"Geschwindigkeiten des DSL-Anschlusses automatisch einstellen"
"Alle ATM-Einstellungen automatisch erkennen" (VCI/VPI : 4/48, PPPoA/VC-Mux - also gives the same result).
Has anyone successfully managed to get the 7170 (Annex A with 29.04.01) to successfully work with Telekom Austria?
Any suggestions/help would be greatly appreciated (in English or German)...
PDM
Edit : forgot to mention that I did not see any resolution for my problem in "Howto: Was tun bei DSL-Verbindungsproblemen" thread.
apologies for writing in English (my written German is terrible).
I am in the process of trying to replace my Speedtouch 510 (stable router) with a FBF7170. The 7170 is reporting the following :
Code:
17.02.07 08:11:05 DSL-Synchronisierung beginnt (Training).
17.02.07 08:10:51 DSL-Synchronisierung beginnt (Training).
17.02.07 08:10:39 Internetverbindung wurde getrennt.
17.02.07 08:10:39 DSL antwortet nicht (Keine DSL-Synchronisierung).
17.02.07 08:09:30 Internetverbindung wurde erfolgreich hergestellt. IP-Adresse: 131.130.xxx.yyy, DNS-Server: 131.130.z.aa und 131.130.z.bb, Gateway: 193.170.184.1
17.02.07 08:09:28 DSL ist verfügbar (DSL-Synchronisierung besteht).
17.02.07 08:09:16 DSL-Synchronisierung beginnt (Training).i.e. I have a connection for approx 1 minute before the 7170 thinks there is a dsl-sync problem.
When the connection is there I see the following within the ADSL info :
Code:
Empfangsrichtung Senderichtung
Leitungskapazität kBit/s 6624 920
ATM-Datenrate kBit/s 2176 256
Nutz-Datenrate kBit/s 1971 232
Latenzpfad fast fast
Latenz ms 0 0
Frame Coding Rate kBit/s 32 32
FEC Coding Rate kBit/s 0 0
Trellis Coding Rate kBit/s 400 60
Aushandlung fixed fixed
Signal/Rauschtoleranz dB 12 25
Leitungsdämpfung dB 33 15
Status 4ebc 6
Loss of
Signal Loss of
Frame Forward Error Correction Cyclic Redun-
dancy Check No Cell Delineation Header Error Control
CPE 0 0 0 857 1 390
COE 4 0 0 1 1802 0My internet settings are :
"Zugangsdaten werden benötigt (PPPoE/PPPoA-Zugang)" (with correct username/passwd)
"Geschwindigkeiten des DSL-Anschlusses automatisch einstellen"
"Alle ATM-Einstellungen automatisch erkennen" (VCI/VPI : 4/48, PPPoA/VC-Mux - also gives the same result).
Has anyone successfully managed to get the 7170 (Annex A with 29.04.01) to successfully work with Telekom Austria?
Any suggestions/help would be greatly appreciated (in English or German)...
PDM
Edit : forgot to mention that I did not see any resolution for my problem in "Howto: Was tun bei DSL-Verbindungsproblemen" thread.
