Hello. First of all, I am a beginner in Freetz-NG. My first undertaking with Freetz-NG was with a 7490 version 7.59 for which I have successfully built and applied the patch - it works flawlessly. However, all of my numerous attempts to install Freetz-NG to a 7272 failed (i.e. the fritzbox never boots up successfully), no matter what settings I apply in menuconfig. To provide some details, it is a "1-1" german version of 7272 which has been debranded and converted to international firmware and used for many years. I have tried both with the latest international FritzOS version 6.88 and the german 6.89 after reconverting it to german (in menuconfig I used the associated option in each case), but to no avail.
What apparently happens is that it reboots shortly after coming up , turning on all the LEDs (i.e. I get a response for three pings before recycling). My initial understanding was that the Fritz-NG releases somehow do not support the latest FritzOS version 06.88/06.89, as, e.g., FritzOS has moved to version 7 and the focus is there.
Still, I have also come up with the following thread which looks relevant, but I am not sure if a solution is suggested there (i.e. reverting to an old version of gcc? ):
www.ip-phone-forum.de
Does anybody help building a Freetz NG firmware for fritzbox 7272?
What apparently happens is that it reboots shortly after coming up , turning on all the LEDs (i.e. I get a response for three pings before recycling). My initial understanding was that the Fritz-NG releases somehow do not support the latest FritzOS version 06.88/06.89, as, e.g., FritzOS has moved to version 7 and the focus is there.
Still, I have also come up with the following thread which looks relevant, but I am not sure if a solution is suggested there (i.e. reverting to an old version of gcc? ):
[Erledigt] - Es werden keine Images mehr für Geräte mit gcc 4.8.5 erstellt
Wenn man nun versucht ein Image für die Gräte mit einen gcc Version von 4.8.5 (wie die 3272) kann man das seit Sonntag nun knicken. Da FDA da mal wieder ein schönen Fehler drin hat.
www.ip-phone-forum.de
Does anybody help building a Freetz NG firmware for fritzbox 7272?
Zuletzt bearbeitet:
