.titleBar { margin-bottom: 5px!important; }

[gelöst] Bei Anruf über ISDN nimmt A@H sofort das Gespräch

Dieses Thema im Forum "FreePBX, TrixBox (Asterisk@Home)" wurde erstellt von cbrandtner, 23 Aug. 2005.

  1. cbrandtner

    cbrandtner Neuer User

    Registriert seit:
    6 Juni 2005
    Beiträge:
    35
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Was mir auffällt und mich stört, ist, das A@H bei einem ankommenden ISDN-Anruf (HFC) sofort das Gespräch annimmt, d.h. der Anrufer hört Freizeichen wenn das SIP-Phone klingelt und muss bezahlen. Das ist bei uns unüblich. bzw. soweit ich weiss auch garnicht zugelassen, Freizeichen senden während des Gespräches ohne den Anrufer abgefragt zu haben.
    Hat jemand ne Idee wie man dem A@H das abgewöhnen kann?
     
  2. Netview

    Netview IPPF-Promi

    Registriert seit:
    1 Apr. 2004
    Beiträge:
    3,366
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Beruf:
    Dipl.-Inf.
    Ort:
    Westerwald
    Dazu müsste mir meine Glaskugel verraten was in diesen Dateien steht: 'extensions.conf' und 'zapata.conf'
     
  3. cbrandtner

    cbrandtner Neuer User

    Registriert seit:
    6 Juni 2005
    Beiträge:
    35
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    also noch vorweg..ich habe A@H 1.5 am laufen mit 2 HFC Karten, die erste am ISDN MSN Anschluss und an der zweiten hängt ein ISDN Telefon.

    In der Extension.Conf hab ich nix geändert, der relevante Teil dort ist in [from-pstn-reghours]

    Da sieht man auch das das Gespräch angenommen wird (ANSWER) , die Frage ist nur warum und muss das sein?
    Wenn ich die Zeile auskommentiere, bekommt der Anrufer nach ein paar Sekunden Besetztzeichen.


    Hier die ZAPATA.CONF
    Code:
    [channels] 
    ;---------------------------------------------------------------------------- 
    ;
    ;---------------------------------------------------------------------------- 
    switchtype = euroisdn 
    signalling = bri_cpe_ptmp 
    language = de
    pridialplan = local 
    prilocaldialplan = local 
    echocancel = yes 
    overlapdial = yes 
    echocancelwhenbridged=no 
    echotraining=no 
    immediate = no 
    usecallerid = yes 
    usecallingpres=yes 
    nationalprefix = 0 
    internationalprefix = 00
    group = 1 
    context = from-pstn 
    channel => 1-2 
     
    
    
    
    ;**********************
    signalling = bri_net_ptmp  
    pridialplan = local 
    language = de
    prilocaldialplan = local 
    echocancel = yes 
    overlapdial = yes 
    echocancelwhenbridged=no 
    echotraining=no 
    immediate = no 
    usecallerid = yes 
    ;
    group = 2
    context = from-internal 
    channel => 4-5 
    usecallingpres=yes 
    nationalprefix = 0 
    internationalprefix = 00
    
    und die Extension.conf
    Code:
    ; Asterisk Management Portal (AMP)
    ; Copyright (C) 2004 Coalescent Systems Inc
    
    ; dialparties.agi (http://www.sprackett.com/asterisk/)
    ; Asterisk::AGI (http://asterisk.gnuinter.net/)
    ; gsm (http://www.ibiblio.org/pub/Linux/utils/compress/!INDEX.short.html)
    ; loligo sounds (http://www.loligo.com/asterisk/sounds/)
    ; mpg123 (http://voip-info.org/wiki-Asterisk+config+musiconhold.conf)
    
    
    ; include extension contexts generated from AMP
    #include extensions_additional.conf
    
    ; Customizations to this dialplan should be made in extensions_custom.conf
    ; See extensions_custom.conf.sample for an example
    #include extensions_custom.conf
    
    [from-trunk]							; just an alias since VoIP shouldn't be called PSTN
    include => from-pstn
    
    [from-pstn]
    include => from-pstn-custom                     ; create this context in extensions_custom.conf to include customizations
    include => ext-did
    include => from-pstn-timecheck          ; this has to be included otherwise it overrides ext-did
    
    [from-pstn2]
    include => from-pstn-custom                     ; create this context in extensions_custom.conf to include customizations
    include => ext-did
    include => from-pstn-timecheck          ; this has to be included otherwise it overrides ext-did
    
    [from-pstn-timecheck]
    exten => .,1,Goto(s,1)		; catch-all matching for calls that have DID info (if a DID route hasn't matched them)
    exten => s,1,GotoIf($[${IN_OVERRIDE} = forcereghours]?from-pstn-reghours,s,1:)
    exten => s,2,GotoIf($[${IN_OVERRIDE} = forceafthours]?from-pstn-afthours,s,1:)
    exten => s,3,GotoIfTime(${REGTIME}|${REGDAYS}|*|*?from-pstn-reghours,s,1:)
    exten => s,4,Goto(from-pstn-afthours,s,1)
    
    [from-pstn-reghours]
    exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-reghours-nofax,s,1:2)	; if fax detection is disabled, then jump to from-pstn-nofax - else continue
    exten => s,2,Answer	
    exten => s,3,Wait(1)
    exten => s,4,SetVar(intype=${INCOMING})
    exten => s,5,Cut(intype=intype,-,1) 
    exten => s,6,GotoIf($[${intype} = EXT]?7:9)		; If INCOMING starts with EXT, then assume its an extension
    exten => s,7,Wait(3) 							;wait 3 more second to make sure this isn't a fax before dialing someone
    exten => s,8,Goto(ext-local,${INCOMING:4},1)
    exten => s,9,GotoIf($[${intype} = GRP]?10:12) 	; If INCOMING starts with GRP, then assume its a ring group
    exten => s,10,Wait(3)
    exten => s,11,Goto(ext-group,${INCOMING:4},1)
    exten => s,12,GotoIf($[${intype} = QUE]?13:15)
    exten => s,13,Wait(3)
    exten => s,14,Goto(ext-queues,${INCOMING:4},1)
    exten => s,15,Goto(${INCOMING},s,1) 			; not EXT or GR1 - it's an auto attendant
    exten => fax,1,Goto(ext-fax,in_fax,1)
    exten => h,1,Hangup
    
    [from-pstn-reghours-nofax]
    exten => s,1,SetVar(intype=${INCOMING})
    exten => s,2,Cut(intype=intype,-,1) 
    exten => s,3,GotoIf($[${intype} = EXT]?4:5)		; If INCOMING starts with EXT, then assume its an extension
    exten => s,4,Goto(ext-local,${INCOMING:4},1)
    exten => s,5,GotoIf($[${intype} = GRP]?6:7) 	; If INCOMING starts with GRP, then assume its a ring group
    exten => s,6,Goto(ext-group,${INCOMING:4},1)
    exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
    exten => s,8,Answer        						; answer call before queue
    exten => s,9,Wait(1)
    exten => s,10,Goto(ext-queues,${INCOMING:4},1)
    exten => s,11,Answer        						; answer call before auto attendant
    exten => s,12,Wait(1)							
    exten => s,13,Goto(${INCOMING},s,1) 				; not EXT or GR1 - it's an auto attendant
    exten => fax,1,Goto(ext-fax,in_fax,1)
    exten => h,1,Hangup
    
    [from-pstn-afthours]
    exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-afthours-nofax,s,1:2)	; if fax detection is disabled, then jump to from-pstn-nofax - else continue
    exten => s,2,Answer	
    exten => s,3,Wait(1)
    exten => s,4,SetVar(intype=${AFTER_INCOMING})
    exten => s,5,Cut(intype=intype,-,1) 
    exten => s,6,GotoIf($[${intype} = EXT]?7:9)		; If INCOMING starts with EXT, then assume its an extension
    exten => s,7,Wait(3) 							;wait 3 more second to make sure this isn't a fax before dialing someone
    exten => s,8,Goto(ext-local,${AFTER_INCOMING:4},1)
    exten => s,9,GotoIf($[${intype} = GRP]?10:12) 	; If INCOMING starts with GRP, then assume its a ring group
    exten => s,10,Wait(3)
    exten => s,11,Goto(ext-group,${AFTER_INCOMING:4},1)
    exten => s,12,GotoIf($[${intype} = QUE]?13:15)
    exten => s,13,Wait(3)
    exten => s,14,Goto(ext-queues,${AFTER_INCOMING:4},1)
    exten => s,15,Goto(${AFTER_INCOMING},s,1) 			; not EXT or GR1 - it's an auto attendant
    exten => fax,1,Goto(ext-fax,in_fax,1)
    exten => h,1,Hangup
    
    [from-pstn-afthours-nofax]
    exten => s,1,SetVar(intype=${AFTER_INCOMING})
    exten => s,2,Cut(intype=intype,-,1) 
    exten => s,3,GotoIf($[${intype} = EXT]?4:5)		; If INCOMING starts with EXT, then assume its an extension
    exten => s,4,Goto(ext-local,${AFTER_INCOMING:4},1)
    exten => s,5,GotoIf($[${intype} = GRP]?6:7) 	; If INCOMING starts with GRP, then assume its a ring group
    exten => s,6,Goto(ext-group,${AFTER_INCOMING:4},1)
    exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue
    exten => s,8,Answer        						; answer call before queue
    exten => s,9,Wait(1)
    exten => s,10,Goto(ext-queues,${AFTER_INCOMING:4},1)
    exten => s,11,Answer        						; answer call before auto attendant
    exten => s,12,Wait(1)							
    exten => s,13,Goto(${AFTER_INCOMING},s,1) 				; not EXT or GR1 - it's an auto attendant
    exten => fax,1,Goto(ext-fax,in_fax,1)
    exten => h,1,Hangup
    
    ; ############################################################################
    ; Macros [macro]
    ; ############################################################################
    
    ; Rings one or more extensions.  Handles things like call forwarding and DND
    ; We don't call dial directly for anything internal anymore.
    ; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ...
    ; Use a Macro call such as the following: 
    ;  Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...)
    [macro-dial]
    exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2)  ; if this is from rg-group, don't strip prefix
    exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?4:3)  ; check for ring-group prefix
    exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off prefix
    exten => s,4,AGI,dialparties.agi
    exten => s,5,NoOp(Returned from dialparties with no extensions to call)
    exten => s,6,SetVar(DIALSTATUS=BUSY)
    exten => s,10,Dial(${ds})                               ; dialparties will set the priority to 10 if $ds is not null
    
    ; Ring an extension, if the extension is busy or there is no answer send it
    ; to voicemail
    ; ARGS: $VMBOX, $EXT
    [macro-exten-vm]
    exten => s,1,Setvar(FROMCONTEXT=exten-vm)
    exten => s,2,Macro(record-enable,${ARG2},IN)
    exten => s,3,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${ARG2})
    exten => s,4,GotoIf($[${CHANNEL:0:5} = Local]?s-${DIALSTATUS},1) ; if the channel is Local, then do not go to voicemail.  This is primarily to avoid vm for call-forwarded extensions in ring groups
    exten => s,5,GotoIf($[${ARG1} = novm]?s-${DIALSTATUS},1) ; no voicemail in use for this extension
    exten => s,6,NoOp(Sending to Voicemail box ${ARG1})
    exten => s,7,Macro(vm,${ARG1},${DIALSTATUS})
    exten => s-BUSY,1,NoOp(Extension is reporting BUSY and has no Voicemail)
    exten => s-BUSY,2,Busy()
    exten => s-BUSY,3,Wait(60)
    exten => s-BUSY,4,NoOp()
    exten => _s-.,1,Congestion()
    
    [macro-vm]
    exten => s,1,Goto(s-${ARG2},1)
    exten => s-BUSY,1,Voicemail(b${ARG1})   ; Voicemail Busy message
    exten => s-BUSY,2,Hangup()
    exten => _s-.,1,Voicemail(u${ARG1})     ; Voicemail Unavailable message
    exten => _s-.,2,Hangup()
    exten => o,1,Background(one-moment-please)      ; 0 during vm message will hangup
    exten => o,2,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)
    exten => a,1,VoiceMailMain(${ARG1})
    exten => a,2,Hangup
    
    ; For some reason, if I don't run setCIDname, CALLERIDNAME will be blank in my AGI
    ; ARGS: none
    [macro-fixcid]
    exten => s,1,SetCIDName(${CALLERIDNAME})
    
    ; Ring groups of phones
    ; ARGS: comma separated extension list
    ; 1 - ringtimer
    ; 2 - preifx
    ; 3 - extension list
    [macro-rg-group]
    exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2)  ; check for old prefix
    exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix
    exten => s,3,Setvar(RGPREFIX=${ARG2})  ; set new prefix
    exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME})  ; add prefix to callerid name
    exten => s,5,Setvar(RecordMethod=Group)  ; set new prefix
    exten => s,6,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
    exten => s,7,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3})
    
    
    ;exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2)  ; check for old prefix
    ;exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix
    ;exten => s,3,Setvar(RGPREFIX=${ARG2})  ; set new prefix
    ;;exten => s,4,Noop(${RGPREFIX}  ${CALLERIDNAME})
    ;exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME})  ; add prefix to callerid name
    ;;exten => s,6,Noop(Dial group ${ARG3})
    ;exten => s,5,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3})
    
    ;exten => s,1,Setvar(GRP=${GRP})   ;my original choice of variable GROUP is now overwritten by SetGroup.  Copy contents to GRP
    ;exten => s,2,SetGroup(${CALLERIDNUM})
    ;exten => s,3,Setvar(FROMCONTEXT=rg-group)
    ;exten => s,4,SetCIDName(${PRE}${CALLERIDNAME})
    ;exten => s,5,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${GRP})
    
    ;
    ; Outgoing channel(s) are busy ... inform the client
    ;
    [macro-outisbusy]
    exten => s,1,Playback(allison7/all-circuits-busy-now)
    exten => s,2,Playback(allison7/pls-try-call-later)
    exten => s,3,Macro(hangupcall)
    
    ; What to do on hangup.
    [macro-hangupcall]
    exten => s,1,ResetCDR(w)
    exten => s,2,NoCDR()
    exten => s,3,Wait(5)
    exten => s,4,Hangup
    
    [macro-faxreceive]
    exten => s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif)
    exten => s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL})
    exten => s,3,rxfax(${FAXFILE})
    exten => s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL})
    exten => s,104,Goto(3)
    
    ; dialout and strip the prefix
    [macro-dialout]
    exten => s,1,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?4) 	;check for CID override for exten
    exten => s,2,SetCallerID(${ECID${CALLERIDNUM}})
    exten => s,3,Goto(6)
    exten => s,4,GotoIf($[foo${OUTCID_${ARG1}} = foo]?6) 		;check for CID override for trunk
    exten => s,5,SetCallerID(${OUTCID_${ARG1}})
    exten => s,6,SetVar(length=${LEN(${DIAL_OUT_${ARG1}})})
    exten => s,7,Dial(${OUT_${ARG1}}/${ARG2:${length}})
    exten => s,8,Congestion
    exten => s,108,Macro(outisbusy)
    
    
    ; dialout using default OUT trunk - no prefix
    [macro-dialout-default]
    exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT)
    exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?5) 	;check for CID override for exten
    exten => s,3,SetCallerID(${ECID${CALLERIDNUM}})
    exten => s,4,Goto(7)
    exten => s,5,GotoIf($[foo${OUTCID} = foo]?7) 	;check for CID override for trunk
    exten => s,6,SetCallerID(${OUTCID})
    exten => s,7,Dial(${OUT}/${ARG1})
    exten => s,8,Congestion
    exten => s,108,Macro(outisbusy)
    
    ; dialout using a trunk, using pattern matching (don't strip any prefix)
    ; arg1 = trunk number, arg2 = number, arg3 = route password
    [macro-dialout-trunk]
    exten => s,1,GotoIf($[foo${ARG3} = foo]?3:2))	; arg3 is pattern password
    exten => s,2,Authenticate(${ARG3})
    exten => s,3,Macro(record-enable,${CALLERIDNUM},OUT)
    exten => s,4,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?7)  ;check for CID override for exten
    exten => s,5,SetCallerID(${ECID${CALLERIDNUM}})
    exten => s,6,Goto(9)
    exten => s,7,GotoIf($[foo${OUTCID_${ARG1}} = foo]?9)  ;check for CID override for trunk
    exten => s,8,SetCallerID(${OUTCID_${ARG1}})
    exten => s,9,SetGroup(OUT_${ARG1})
    exten => s,10,CheckGroup(${OUTMAXCHANS_${ARG1}})
    ; if we've used up the max channels, continue at 109 (n+101)
    exten => s,11,SetVar(DIAL_NUMBER=${ARG2})
    exten => s,12,SetVar(DIAL_TRUNK=${ARG1})
    exten => s,13,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
    exten => s,14,SetVar(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER})  ; OUTNUM is the final dial number
    exten => s,15,Cut(custom=OUT_${ARG1},:,1)  ; Custom trunks are prefixed with "AMP:"
    exten => s,16,GotoIf($[${custom} = AMP]?19)
    exten => s,17,Dial(${OUT_${ARG1}}/${OUTNUM})  ; Regular Trunk Dial
    exten => s,18,Goto(s-${DIALSTATUS},1)
    
    ; This is a custom trunk.  Substitute $OUTNUM$ with the actual number and rebuild the dialstring
    ; example trunks: "AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r", "AMP:OH323/$OUTNUM$@XX.XX.XX.XX:XXXX"
    exten => s,19,Cut(pre_num=OUT_${ARG1},$,1)
    exten => s,20,Cut(the_num=OUT_${ARG1},$,2)  ; this is where we expect to find string OUTNUM
    exten => s,21,Cut(post_num=OUT_${ARG1},$,3)
    exten => s,22,GotoIf($[${the_num} = OUTNUM]?23:24) ; if we didn't find "OUTNUM", then skip to Dial
    exten => s,23,SetVar(the_num=${OUTNUM}) ; replace "OUTNUM" with the actual number to dial
    exten => s,24,Dial(${pre_num:4}${the_num}${post_num})
    exten => s,25,Goto(s-${DIALSTATUS},1)
    
    exten => s,111,Noop(max channels used up)
    exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
    exten => s-BUSY,2,Busy()
    exten => s-BUSY,3,Wait(60)
    exten => s-BUSY,4,NoOp()
    
    exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
    
    ; Adds a dynamic agent/member to a Queue
    ; Prompts for call-back number - in not entered, uses CIDNum
    [macro-agent-add]
    exten => s,1,Wait(1)
    exten => s,2,NoOp
    exten => s,3,Read(CALLBACKNUM,agent-user)  	; get callback number from user
    exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7))	; if user just pressed # or timed out, use cidnum
    exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
    exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2))	; if still no number, start over
    exten => s,7,GotoIf($[foo${ARG2} = foo]?9:8))	; arg2 is queue password
    exten => s,8,Authenticate(${ARG2})
    exten => s,9,AddQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal)	; using chan_local allows us to have agents over trunks
    exten => s,10,Wait(1)
    exten => s,11,Playback(agent-loginok)
    exten => s,12,Hangup()
    
    ; Removes a dynamic agent/member from a Queue
    ; Prompts for call-back number - in not entered, uses CIDNum
    [macro-agent-del]
    exten => s,1,Wait(1)
    exten => s,2,NoOp
    exten => s,3,Read(CALLBACKNUM,agent-user)  	; get callback number from user
    exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7))	; if user just pressed # or timed out, use cidnum
    exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM})
    exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2))	; if still no number, start over
    exten => s,7,RemoveQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal)
    exten => s,8,Wait(1)
    exten => s,9,Playback(agent-loggedoff)
    exten => s,10,Hangup()
    
    ; arg1 = trunk number, arg2 = number
    [macro-dialout-enum]
    exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT)
    exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?3)        ;check for CID override for exten
    exten => s,3,SetCallerID(${ECID${CALLERIDNUM}})
    exten => s,4,Goto(7)
    exten => s,5,GotoIf($[foo${OUTCID_${ARG1}} = foo]?7)            ;check for CID override for trunk
    exten => s,6,SetCallerID(${OUTCID_${ARG1}})
    exten => s,7,SetGroup(OUT_${ARG1})
    exten => s,8,CheckGroup(${OUTMAXCHANS_${ARG1}})		; if we've used up the max channels, continue at 108 (n+101)
    exten => s,9,SetVar(DIAL_NUMBER=${ARG2})
    exten => s,10,SetVar(DIAL_TRUNK=${ARG1})
    exten => s,11,AGI(fixlocalprefix) 						; this sets DIAL_NUMBER to the proper dial string for this trunk
    exten => s,12,EnumLookup(${DIAL_NUMBER})
    exten => s,13,GotoIf($[$[${ENUM:0:3} = SIP] | $[${ENUM:0:3} = IAX]]?14:63)
    exten => s,14,Dial(${ENUM})
    exten => s,15,Goto(s-${DIALSTATUS},1)
    ; if dial fails (ie, all channels are busy), continue at 116 (n+101)
    
    ; exit points for macro
    exten => s,63,NoOp(EnumLookup failed)
    exten => s,109,NoOp(max channels used up)
    
    exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
    exten => s-BUSY,2,Busy()
    exten => s-BUSY,3,Wait(60)
    exten => s-BUSY,4,NoOp()
    
    exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
    
    [macro-record-enable]
    exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4)
    exten => s,2,ResetCDR(w)
    exten => s,3,StopMonitor()
    exten => s,4,GotoIf($["${ARG2}" = "OUT"]?5:8) 
    exten => s,5,DBGet(RecEnable=RECORD-OUT/${ARG1}) 
    exten => s,6,SetVar(CALLFILENAME=OUT${ARG1}-${TIMESTAMP}-${UNIQUEID})
    exten => s,7,Goto(s,14)
    exten => s,8,GotoIf($["${ARG2}" = "Group"]?9:12) 
    exten => s,9,AGI(recordingcheck)
    exten => s,10,SetVar(CALLFILENAME=g${ARG1}-${TIMESTAMP}-${UNIQUEID})
    exten => s,11,Goto(s,14)
    exten => s,12,DBGet(RecEnable=RECORD-IN/${ARG1}) 
    exten => s,13,SetVar(CALLFILENAME=${TIMESTAMP}-${UNIQUEID})
    exten => s,14,GotoIf($["${RecEnable}" = "ENABLED"]?15:99) 
    exten => s,15,Monitor(wav49,${CALLFILENAME}, mb)
    exten => s,99,Noop(NO RECORDING NEEDED) 
    ;exten => s,3,BackGround(for-quality-purposes)
    ;exten => s,4,BackGround(this-call-may-be)
    ;exten => s,5,BackGround(recorded)
    
    ; This macro is for dev purposes and just dumps channel/app variables.  Useful when designing new contexts. 
    [macro-dumpvars]
    exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE})
    exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME})
    exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER})
    exten => s,4,Noop(CALLERID=${CALLERID})
    exten => s,5,Noop(CALLERIDNAME=${CALLERIDNAME})
    exten => s,6,Noop(CALLERIDNUM=${CALLERIDNUM})
    exten => s,7,Noop(CALLINGPRES=${CALLINGPRES})
    exten => s,8,Noop(CHANNEL=${CHANNEL})
    exten => s,9,Noop(CONTEXT=${CONTEXT})
    exten => s,10,Noop(DATETIME=${DATETIME})
    exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME})
    exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER})
    exten => s,13,Noop(DIALEDTIME=${DIALEDTIME})
    exten => s,14,Noop(DIALSTATUS=${DIALSTATUS})
    exten => s,15,Noop(DNID=${DNID})
    exten => s,16,Noop(EPOCH=${EPOCH})
    exten => s,17,Noop(EXTEN=${EXTEN})
    exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE})
    exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN})
    exten => s,20,Noop(LANGUAGE=${LANGUAGE})
    exten => s,21,Noop(MEETMESECS=${MEETMESECS})
    exten => s,22,Noop(PRIORITY=${PRIORITY})
    exten => s,23,Noop(RDNIS=${RDNIS})
    exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN})
    exten => s,25,Noop(SIP_CODEC=${SIP_CODEC})
    exten => s,26,Noop(SIPCALLID=${SIPCALLID})
    exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT})
    exten => s,28,Noop(TIMESTAMP=${TIMESTAMP})
    exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME})
    exten => s,30,Noop(UNIQUEID=${UNIQUEID})
    exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR})
    exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT})
    exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN})
    exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY})
    
    
    ; ############################################################################
    ; Applications [app]
    ; ############################################################################
    ;
    [app-directory]
    ;DIR-CONTEXT set in Digital Receptionist
    exten => #,1,Wait(1)
    exten => #,2,AGI(directory,${DIR-CONTEXT},ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS}o)
    exten => #,3,Playback(vm-goodbye)
    exten => #,4,Hangup
    ; *411 will access the entire directory (not just a single context)
    exten => *411,1,Answer
    exten => *411,2,Wait(1)
    exten => *411,3,AGI(directory,general,ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS})
    exten => *411,4,Playback(vm-goodbye)
    exten => *411,5,Hangup
    exten => h,1,Hangup
    exten => o,1,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1)
    
    [app-dnd]
    exten => *78,1,Answer
    exten => *78,2,Wait(1)
    exten => *78,3,DBput(DND/${CALLERIDNUM}=YES)
    exten => *78,4,Playback(allison7/do-not-disturb)
    exten => *78,5,Playback(activated)
    exten => *78,6,Macro(hangupcall)
    exten => *79,1,Answer
    exten => *79,2,Wait(1)
    exten => *79,3,DBdel(DND/${CALLERIDNUM})
    exten => *79,4,Playback(allison7/do-not-disturb)
    exten => *79,5,Playback(de-activated)
    exten => *79,6,Macro(hangupcall)
    
    [app-messagecenter]
    exten => *98,1,Answer
    exten => *98,2,Wait(1)
    exten => *98,3,VoiceMailMain(default)
    exten => *98,4,Macro(hangupcall)
    exten => _*98X.,1,Answer			; can dial *98<exten> to skip 'mailbox' prompt.  Useful for speedial.
    exten => _*98X.,2,Wait(1)
    exten => _*98X.,3,VoiceMailMain(${EXTEN:3}@default)
    exten => _*98X.,4,Macro(hangupcall)
    exten => *97,1,Answer
    exten => *97,2,Wait(1)
    exten => *97,3,VoicemailMain(${CALLERIDNUM}@default)
    exten => *97,4,Macro(hangupcall)
    
    [app-callwaiting]
    exten => *70,1,Answer
    exten => *70,2,Wait(1)
    exten => *70,3,DBput(CW/${CALLERIDNUM}=ENABLED)
    exten => *70,4,Playback(callwaiting)
    exten => *70,5,Playback(activated)
    exten => *70,6,Macro(hangupcall)
    exten => *71,1,Answer
    exten => *71,2,Wait(1)
    exten => *71,3,DBdel(CW/${CALLERIDNUM})
    exten => *71,4,Playback(callwaiting)
    exten => *71,5,Playback(de-activated)
    exten => *71,6,Macro(hangupcall)
    
    [app-callforward]
    ; dialed call forward app - forwards calling extension
    exten => _*72.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:3})
    exten => _*72.,2,Answer
    exten => _*72.,3,Wait(1)
    exten => _*72.,4,Playback(loligo/call-fwd-unconditional)
    exten => _*72.,5,Playback(loligo/for)
    exten => _*72.,6,Playback(loligo/extension)
    exten => _*72.,7,SayDigits(${CALLERIDNUM})
    exten => _*72.,8,Playback(loligo/is-set-to)
    exten => _*72.,9,SayDigits(${EXTEN:3})
    exten => _*72.,10,Macro(hangupcall)
    ; prompting call forward app - forwards entered extension
    exten => *72,1,Answer
    exten => *72,2,Wait(1)
    exten => *72,3,BackGround(allison7/please-enter-your)
    exten => *72,4,Playback(extension)
    exten => *72,5,Read(fromext,then-press-pound)
    exten => *72,6,Wait(1)
    exten => *72,7,BackGround(ent-target-attendant)
    exten => *72,8,Read(toext,then-press-pound)
    exten => *72,9,Wait(1)
    exten => *72,10,DBput(CF/${fromext}=${toext})
    exten => *72,11,Playback(call-fwd-unconditional)
    exten => *72,12,Playback(for)
    exten => *72,13,Playback(extension)
    exten => *72,14,SayDigits(${fromext})
    exten => *72,15,Playback(is-set-to)
    exten => *72,16,SayDigits(${toext})
    exten => *72,17,Macro(hangupcall)
    ; cancels dialed extension call forward
    exten => _*73.,1,DBdel(CF/${EXTEN:3})
    exten => _*73.,2,Answer
    exten => _*73.,3,Wait(1)
    exten => _*73.,4,SayDigits(${EXTEN:3})
    exten => _*73.,5,Playback(call-fwd-cancelled)
    exten => _*73.,6,Macro(hangupcall)
    ; cancels call forward for calling extension
    exten => *73,1,DBdel(CF/${CALLERIDNUM})
    exten => *73,2,Answer
    exten => *73,3,Wait(1)
    exten => *73,4,Playback(loligo/call-fwd-cancelled)
    exten => *73,5,Macro(hangupcall)
    ; dialed call forward on busy app - forwards calling extension when busy
    exten => _*90.,1,DBput(CFB/${CALLERIDNUM}=${EXTEN:3})
    exten => _*90.,2,Answer
    exten => _*90.,3,Wait(1)
    exten => _*90.,4,Playback(loligo/call-fwd-on-busy)
    exten => _*90.,5,Playback(loligo/for)
    exten => _*90.,6,Playback(loligo/extension)
    exten => _*90.,7,SayDigits(${CALLERIDNUM})
    exten => _*90.,8,Playback(loligo/is-set-to)
    exten => _*90.,9,SayDigits(${EXTEN:3})
    exten => _*90.,10,Macro(hangupcall)
    ; cancels call forward on busy for calling extension
    exten => *91,1,DBdel(CFB/${CALLERIDNUM})
    exten => *91,2,Answer
    exten => *91,3,Wait(1)
    exten => *91,4,Playback(call-fwd-on-busy)
    exten => *91,5,Playback(de-activated)
    exten => *91,6,Macro(hangupcall)
    exten => h,1,Hangup
    
    [app-calltrace]
    ; We can't have our timeouts or dial digits collide with other applications
    ; or extensions, so we build the app in pieces
    exten => *69,1,Goto(app-calltrace-perform,s,1)
    
    [app-calltrace-perform]
    exten => s,1,Answer
    exten => s,2,Wait(1)
    exten => s,3,Background(allison7/info-about-last-call)
    exten => s,4,Background(allison7/telephone-number)
    exten => s,5,Dbget(lastcaller=CALLTRACE/${CALLERIDNUM})
    exten => s,6,GotoIf($[${lastcaller}]?7:13)
    exten => s,7,SayDigits(${lastcaller})
    exten => s,8,DigitTimeout(3)
    exten => s,9,ResponseTimeout(7)
    exten => s,10,Background(loligo/to-call-this-number)
    exten => s,11,Background(allison7/press-1)
    exten => s,12,Goto(15)
    exten => s,13,Playback(loligo/from-unknown-caller)
    exten => s,14,Macro(hangupcall)
    exten => s,15,NoOp
    exten => 1,1,Goto(from-internal,${lastcaller},1);
    exten => i,1,Playback(vm-goodbye)
    exten => i,2,Macro(hangupcall)
    exten => t,1,Playback(vm-goodbye)
    exten => t,2,Macro(hangupcall)
    
    
    ; ############################################################################
    ; Inbound Contexts [from]
    ; ############################################################################
    
    [from-sip-external]
    
    ;give external sip users congestion and hangup
    ;exten => _.,1,AbsoluteTimeout(15)
    ;exten => _.,2,Congestion 
    ;exten => _.,3,Hangup
    
    
    exten=>2451052,1,Goto(from-pstn,s,1)
    exten=>2451052,2,Hangup
    [from-internal]
    ;allow phones to use applications
    include => app-directory
    include => app-dnd
    include => app-callforward
    include => app-callwaiting
    include => app-messagecenter
    include => app-calltrace
    include => parkedcalls
    include => from-internal-custom
    ;allow phones to dial other extensions
    include => ext-fax
    include => ext-local
    include => ext-group
    include => ext-queues
    include => ext-zapbarge
    include => ext-meetme
    include => ext-record
    include => ext-test
    ;allow phones to access trunks
    include => outbound-allroutes
    exten => s,1,Macro(hangupcall)
    exten => h,1,Macro(hangupcall)
    
    ; ############################################################################
    ; Extension Contexts [ext]
    ; ############################################################################
    
    [ext-zapbarge]
    exten => 888,1,SetGroup(${CALLERIDNUM})
    exten => 888,2,Answer
    exten => 888,3,Wait(1)
    exten => 888,4,ZapBarge
    exten => 888,5,Hangup
    
    [ext-meetme]
    exten => _8X,1,Answer
    exten => _8X,2,Wait(1)
    exten => _8X,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
    exten => _8X,4,MeetMe(${EXTEN}|sM)
    exten => _8X,5,MeetMe(${EXTEN}|asM)
    
    exten => _8XX,1,Answer
    exten => _8XX,2,Wait(1)
    exten => _8XX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
    exten => _8XX,4,MeetMe(${EXTEN}|sM)
    exten => _8XX,5,MeetMe(${EXTEN}|asM)
    
    exten => _8XXX,1,Answer
    exten => _8XXX,2,Wait(1)
    exten => _8XXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
    exten => _8XXX,4,MeetMe(${EXTEN}|sM)
    exten => _8XXX,5,MeetMe(${EXTEN}|asM)
    
    exten => _8XXXX,1,Answer
    exten => _8XXXX,2,Wait(1)
    exten => _8XXXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4)
    exten => _8XXXX,4,MeetMe(${EXTEN}|sM)
    exten => _8XXXX,5,MeetMe(${EXTEN}|asM)
    
    
    [ext-fax]
    exten => s,1,Answer
    exten => s,2,Goto(in_fax,1)
    exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1)
    exten => in_fax,2,Macro(faxreceive)
    exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf - ${FAXFILE}.pdf)
    exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM} ${CALLERIDNAME}" --attachment ${CALLERIDNUM}.pdf --type application/pdf --file ${FAXFILE}.pdf)
    exten => in_fax,5,system(rm ${FAXFILE} ${FAXFILE}.pdf)
    exten => in_fax,6,Hangup
    exten => analog_fax,1,GotoIf($[${FAX_RX} = disabled]?3:2)  ;if fax is disabled, just hang up
    exten => analog_fax,2,Dial(${FAX_RX},20,d)
    exten => analog_fax,3,Hangup
    ;exten => out_fax,1,wait(7)
    exten => out_fax,1,txfax(${TXFAX_NAME}|caller)
    exten => out_fax,2,Hangup
    exten => h,1,Hangup()
    
    [ext-record]
    exten => *77,1,Wait(2)
    exten => *77,2,Record(${CALLERIDNUM}ivrrecording:wav) 
    exten => *77,3,Wait(2)
    exten => *77,4,Hangup
    exten => *99,1,Playback(${CALLERIDNUM}ivrrecording) 
    exten => *99,2,Wait(2) 
    exten => *99,3,Hangup 
    
    ;this is where parked calls go if they time-out.  Should probably re-ring
    [default]
    include => ext-local
    exten => s,1,Playback(vm-goodbye)
    exten => s,2,Macro(hangupcall)
    
    [ext-test]
    exten => 7777,1,Goto(from-pstn,s,1)
    exten => 666,1,Goto(ext-fax,in_fax,1)
    exten => h,1,Macro(hangupcall)
    
    ;echo test
    exten => *43,1,Answer
    exten => *43,2,Wait(2)
    exten => *43,3,Playback(demo-echotest)
    exten => *43,4,Echo
    exten => *43,5,Playback(demo-echodone)
    exten => *43,6,Hangup
    
    
     
  4. Netview

    Netview IPPF-Promi

    Registriert seit:
    1 Apr. 2004
    Beiträge:
    3,366
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Beruf:
    Dipl.-Inf.
    Ort:
    Westerwald
    die zapata.conf verweist auf folgenden context:

    [from-pstn]
    include => from-pstn-custom ; create this context in

    hier steht ein include für eine extension die nicht existiert?!
     
  5. cbrandtner

    cbrandtner Neuer User

    Registriert seit:
    6 Juni 2005
    Beiträge:
    35
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    der steht in der extensions_custum.conf.

    Code:
    ; This file contains example extensions_custom.conf entries.
    ; extensions_custom.conf should be used to include customizations
    ; to AMP's Asterisk dialplan.
    
    ; All custom context should contain the string 'custom' in it's name 
    
    ; Extensions in AMP have access to the 'from-internal' context.
    ; The context 'from-internal-custom' is included in 'from-internal' by default
    
    [from-pstn-custom]
    exten=>153865,1,Goto(from-pstn,s,1)
    
    
    
    
    [from-internal-custom]				
    ;1234,1,Playback(demo-congrats)		; extensions can dial 1234
    ;1234,2,Hangup()
    ;h,1,Hangup()
    ;include => custom-recordme			; extensions can also dial 5678 
    
    exten => *60,1,Answer
    exten => *60,2,Playback(at-tone-time-exactly)
    exten => *60,3,SayUnixTime(,,IMp)
    exten => *60,4,Playback(beep)
    exten => *60,5,Hangup
    
    exten => *61,1,Answer
    exten => *61,2,AGI(weather.agi)
    exten => *61,3,Hangup
    
    exten => *62,1,Answer 
    exten => *62,2,AGI(wakeup.php) 
    exten => *62,3,Hangup 
    
    exten => *65,1,Answer
    exten => *65,2,AGI(festival-script.pl|Your phone number is ${CALLERIDNUM}.)
    exten => *65,3,Hangup
    
    [custom-meetme]
    include => ext-meetme		
    exten => s,1,BackGround(enter-conf-call-number)
    exten => h,1,Hangup()
    
    [custom-wakeupext] 
    exten => s,1,Answer 
    exten => s,2,AGI(wakeup-ext.php); 
    exten => s,3,Hangup 
    
    ; custom-count2four,s,1 can be used as a custom target for
    ; a Digital Receptionist menu or a Call Group
    ;[custom-count2four]		
    ;s,1,SayDigits(1234)
    ;s,2,Hangup
    
    ; custom-recordme,5678,1 can be used as a custom target for
    ; a Digital Receptionist menu or a Call Group
    ;[custom-recordme]
    ;exten => 5678,1,Wait(2)
    ;exten => 5678,2,Record(/tmp/asterisk-recording:gsm)
    ;exten => 5678,3,Wait(2)
    ;exten => 5678,4,Playback(/tmp/asterisk-recording)
    ;exten => 5678,5,Wait(2)
    ;exten => 5678,6,Hangup 
    
    
     
  6. Netview

    Netview IPPF-Promi

    Registriert seit:
    1 Apr. 2004
    Beiträge:
    3,366
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Beruf:
    Dipl.-Inf.
    Ort:
    Westerwald
    Lass doch mal einen debug laufen mit 'asterisk -dddvvvr' und initiiere mal einen Anruf dann sehen wir vielleicht mehr!
     
  7. cbrandtner

    cbrandtner Neuer User

    Registriert seit:
    6 Juni 2005
    Beiträge:
    35
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    und hier ist er schon...

    Code:
    
    asterisk1*CLI>
        -- Executing Goto("Zap/1-1", "from-pstn|s|1") in new stack
        -- Goto (from-pstn,s,1)
        -- Executing GotoIf("Zap/1-1", "1?from-pstn-reghours|s|1:") in new stack
        -- Goto (from-pstn-reghours,s,1)
        -- Executing GotoIf("Zap/1-1", "0?from-pstn-reghours-nofax|s|1:2") in new stack
        -- Goto (from-pstn-reghours,s,2)
        -- Executing Answer("Zap/1-1", "") in new stack
        -- Accepting voice call from '5731159999' to '153865' on channel 0/1, span 1
        -- Executing Wait("Zap/1-1", "1") in new stack
        -- Executing SetVar("Zap/1-1", "intype=GRP-1") in new stack
        -- Executing Cut("Zap/1-1", "intype=intype|-|1") in new stack
        -- Executing GotoIf("Zap/1-1", "0?7:9") in new stack
        -- Goto (from-pstn-reghours,s,9)
        -- Executing GotoIf("Zap/1-1", "1?10:12") in new stack
        -- Goto (from-pstn-reghours,s,10)
        -- Executing Wait("Zap/1-1", "3") in new stack
        -- Executing Goto("Zap/1-1", "ext-group|1|1") in new stack
        -- Goto (ext-group,1,1)
        -- Executing Macro("Zap/1-1", "rg-group|15|Sales|201") in new stack
        -- Executing GotoIf("Zap/1-1", "0?3:2") in new stack
        -- Goto (macro-rg-group,s,2)
        -- Executing SetCIDName("Zap/1-1", "05731159999") in new stack
        -- Executing SetVar("Zap/1-1", "RGPREFIX=Sales") in new stack
        -- Executing SetCIDName("Zap/1-1", "Sales05731159999") in new stack
        -- Executing SetVar("Zap/1-1", "RecordMethod=Group") in new stack
        -- Executing Macro("Zap/1-1", "record-enable|1|Group") in new stack
        -- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
        -- Goto (macro-record-enable,s,4)
        -- Executing GotoIf("Zap/1-1", "0?5:8") in new stack
        -- Goto (macro-record-enable,s,8)
        -- Executing GotoIf("Zap/1-1", "1?9:12") in new stack
        -- Goto (macro-record-enable,s,9)
        -- Executing AGI("Zap/1-1", "recordingcheck") in new stack
        -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
        -- AGI Script recordingcheck completed, returning 0
        -- Executing SetVar("Zap/1-1", "CALLFILENAME=g1-20050823-130433-asterisk-1337-1124795069.38") in new stack
        -- Executing Goto("Zap/1-1", "s|14") in new stack
        -- Goto (macro-record-enable,s,14)
        -- Executing GotoIf("Zap/1-1", "0?15:99") in new stack
        -- Goto (macro-record-enable,s,99)
        -- Executing NoOp("Zap/1-1", "NO RECORDING NEEDED") in new stack
        -- Executing Macro("Zap/1-1", "dial|15|tr|201") in new stack
        -- Executing GotoIf("Zap/1-1", "1?4:2") in new stack
        -- Goto (macro-dial,s,4)
        -- Executing AGI("Zap/1-1", "dialparties.agi") in new stack
        -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
        --  dialparties.agi: request = dialparties.agi
        --  dialparties.agi: priority = 4
        --  dialparties.agi: extension = s
        --  dialparties.agi: language = de
        --  dialparties.agi: accountcode =
        --  dialparties.agi: uniqueid = asterisk-1337-1124795069.38
        --  dialparties.agi: channel = Zap/1-1
        --  dialparties.agi: callerid = Sales05731159999 <05731159999>
        --  dialparties.agi: context = macro-dial
        --  dialparties.agi: type = Zap
        --  dialparties.agi: rdnis = unknown
        --  dialparties.agi: enhanced = 0.0
        --  dialparties.agi: dnid = 153865
      dialparties.agi: Caller ID name is 'Sales05731159999' number is '05731153516'
        --  dialparties.agi: Added extension 201 to extension map
        --  dialparties.agi: Extension 201 cf is disabled
        --  dialparties.agi: Extension 201 do not disturb is disabled
      == Manager 'admin' logged on from 127.0.0.1
      == Manager 'admin' logged off from 127.0.0.1
      dialparties.agi: Extension 201 has call waiting disabled
        --  dialparties.agi: DbSet CALLTRACE/201 to 05731159999
      dialparties.agi: Dial string is SIP/201|15|tr
        -- AGI Script dialparties.agi completed, returning 0
        -- Executing Dial("Zap/1-1", "SIP/201|15|tr") in new stack
        -- Called 201
        -- SIP/201-1879 is ringing
        -- Channel 0/1, span 1 got hangup
        -- Hungup 'Zap/1-1'
    asterisk1*CLI>
    
    
    ich hab hier nur angerufen und den Anruf nicht angenommen am 201 X-Lite, dann hab ich aufgelegt.
     
  8. cbrandtner

    cbrandtner Neuer User

    Registriert seit:
    6 Juni 2005
    Beiträge:
    35
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hab die Lösung selbst gefunden habe.....
    war ganz einfach ;-)
    in den General Settings muss Fax Maschine disabled werden....wenn man keine Fax Funktionen braucht...
     
  9. VOIPdani

    VOIPdani Mitglied

    Registriert seit:
    8 Aug. 2005
    Beiträge:
    432
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hi cbrandtner!

    Ich bin ein *@home-neuling und habe seit kurzem version 1.5 laufen. Nun möchte ich meine ISDN-Karten (AVM Fritz!Card und HFC) zum laufen bringen. Aber wie kann ich die ISDN-Karten unter CentOS installieren.

    Habe schon einige verwirrende Installationsanleitungen befolgt und danach meist *@home neu aufsetzen können weil sich * nicht mehr starten ließ.

    Kann mir da vielleicht wer weiterhelfen?

    Gruß, Daniela