[gelöst] gefrizter Speedport 701v vergisst Einstellung zu Telefoniergeräte

jocale · 8 Jan 2010

Ich habe ein Speedport 701v mit Freetz gefrizt und Firmware augespielt.
Der Speedport vergißt nun ständig die Einstellungen zu den Telefoniergeräten, bzw nach einem Reboot ist plötzlich alles weg bei den Telofoniergeräten.

auch hängt er sich ständig auf. z.B. nach ein Telefongespräch oder Faxversuch. Ich habe es mit Freetz 1.1.2 und verschiedene Trunk Versionen versucht.

Meine .config File für Freetz

Code:

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
FREETZ_TYPE_FON_WLAN_7170=y
# FREETZ_TYPE_FON_WLAN_7240 is not set
# FREETZ_TYPE_FON_WLAN_7270 is not set
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_WLAN_3270_V3 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
# FREETZ_TYPE_LABOR is not set
FREETZ_TYPE_ALIEN_HARDWARE=y
FREETZ_TYPE_SPEEDPORT_W701V_7170=y
# FREETZ_TYPE_SPEEDPORT_W900V_7170 is not set
# FREETZ_TYPE_3170_7170 is not set
# FREETZ_TYPE_7113_7170 is not set
# FREETZ_TYPE_7140_7170 is not set
# FREETZ_TYPE_7141_7170 is not set
FREETZ_AVM_VERSION_STRING="04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7170"
FREETZ_TYPE_STRING2="W701V_"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
# FREETZ_REPLACE_KERNEL is not set
FREETZ_SHOW_ADVANCED=y
# FREETZ_TARGET_IPV6_SUPPORT is not set
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ohio"
FREETZ_KERNEL_MTD_SIZE=119
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
# FREETZ_HAS_USB_HOST is not set
# FREETZ_HAS_AVM_INETD is not set
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#

#
# avm and tcom branding can't be removed
#
FREETZ_REMOVE_BRANDING_1und1=y
FREETZ_REMOVE_BRANDING_freenet=y
FREETZ_REMOVE_HELP=y
FREETZ_REMOVE_ASSISTANT=y
# FREETZ_REMOVE_TR069 is not set
FREETZ_PATCH_DSL_EXPERT=y
FREETZ_PATCH_VCC=y
FREETZ_PATCH_SIGNED=y
FREETZ_PATCH_ALARMCLOCK=y
# FREETZ_PATCH_MULTIPLE_PRINTERS is not set
# FREETZ_PATCH_GETCONS is not set
FREETZ_REMOVE_SUPPORT=y
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set
FREETZ_REMOVE_AVM_VPN=y
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_DTRACE is not set
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
FREETZ_PACKAGE_CALLMONITOR=y
FREETZ_PACKAGE_CALLMONITOR_webif=y
FREETZ_PACKAGE_CALLMONITOR_actions=y
FREETZ_PACKAGE_CALLMONITOR_monitor=y
FREETZ_PACKAGE_CALLMONITOR_phonebook=y
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
FREETZ_PACKAGE_CPMACCFG=y
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNSMASQ is not set
# FREETZ_PACKAGE_DROPBEAR is not set
FREETZ_PACKAGE_DTMFBOX=y

#
# CAPI/SIP
#
FREETZ_PACKAGE_DTMFBOX_WITH_CAPI=y
FREETZ_PACKAGE_DTMFBOX_WITH_VOIP=y
FREETZ_PACKAGE_DTMFBOX_WITH_ICE=y

#
# Codecs
#
FREETZ_PACKAGE_DTMFBOX_WITH_G711_CODEC=y
# FREETZ_PACKAGE_DTMFBOX_WITH_SPEEX_CODEC is not set
# FREETZ_PACKAGE_DTMFBOX_WITH_GSM_CODEC is not set

#
# Misc
#
# FREETZ_PACKAGE_DTMFBOX_SVN is not set
# FREETZ_PACKAGE_DTMFBOX_USE_DIFF_PATCH is not set
FREETZ_PACKAGE_DTMFBOX_WITH_WEBPHONE=y
FREETZ_PACKAGE_DTMFBOX_WITH_HELP=y
# FREETZ_PACKAGE_DTMFBOX_WITH_ESPEAK is not set
# FREETZ_PACKAGE_DTMFBOX_WITH_MADPLAY is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
FREETZ_PACKAGE_INETD=y
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NTFS is not set
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
FREETZ_PACKAGE_PRIVOXY=y
FREETZ_PACKAGE_PRIVOXY_WITH_SHARED_PCRE=y
# FREETZ_PACKAGE_PRIVOXY_WITH_ZLIB is not set
FREETZ_PACKAGE_RCAPID=y
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
FREETZ_PACKAGE_TOR=y
# FREETZ_PACKAGE_TOR_STATIC is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set

#
# Web interface
#
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
# FREETZ_PACKAGE_AVM_FIREWALL is not set
FREETZ_PACKAGE_CPMACCFG_CGI=y
# FREETZ_PACKAGE_DOWNLOADER is not set
FREETZ_PACKAGE_NFSD_CGI=y
FREETZ_PACKAGE_NHIPT=y
FREETZ_PACKAGE_IPTABLES=y

#
# CAUTION: Use of module ip_conntrack can lead to spontaneous reboots
#
FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES=y

#
# Select kernel modules (IPv4)
#
FREETZ_MODULE_ip_conntrack=y
FREETZ_MODULE_ip_conntrack_ftp=y
# FREETZ_MODULE_ip_conntrack_irc is not set
# FREETZ_MODULE_ip_conntrack_tftp is not set
# FREETZ_MODULE_ip_conntrack_proto_sctp is not set
# FREETZ_MODULE_ip_nat_ftp is not set
# FREETZ_MODULE_ip_nat_irc is not set
# FREETZ_MODULE_ip_nat_tftp is not set
FREETZ_MODULE_iptable_filter=y
# FREETZ_MODULE_iptable_mangle is not set
# FREETZ_MODULE_iptable_nat is not set
FREETZ_MODULE_ip_tables=y
# FREETZ_MODULE_ipt_connmark is not set
# FREETZ_MODULE_ipt_conntrack is not set
# FREETZ_MODULE_ipt_helper is not set
FREETZ_MODULE_ipt_iprange=y
# FREETZ_MODULE_ipt_layer7 is not set
# FREETZ_MODULE_ipt_length is not set
# FREETZ_MODULE_ipt_limit is not set
FREETZ_MODULE_ipt_LOG=y
# FREETZ_MODULE_ipt_comment is not set
# FREETZ_MODULE_ipt_mac is not set
# FREETZ_MODULE_ipt_mark is not set
# FREETZ_MODULE_ipt_MARK is not set
# FREETZ_MODULE_ipt_MASQUERADE is not set
FREETZ_MODULE_ipt_multiport=y
# FREETZ_MODULE_ipt_REDIRECT is not set
# FREETZ_MODULE_ipt_REJECT is not set
FREETZ_MODULE_ipt_state=y
# FREETZ_MODULE_ipt_tcpmss is not set
# FREETZ_MODULE_ipt_TCPMSS is not set
# FREETZ_MODULE_ipt_tos is not set
# FREETZ_MODULE_ipt_TOS is not set
# FREETZ_MODULE_ipt_ttl is not set
FREETZ_PACKAGE_IPTABLES_SHARED_LIBS=y

#
# Select shared libraries (IPv4)
#
# FREETZ_LIB_libipt_addrtype is not set
# FREETZ_LIB_libipt_ah is not set
# FREETZ_LIB_libipt_CLUSTERIP is not set
# FREETZ_LIB_libipt_DNAT is not set
# FREETZ_LIB_libipt_ecn is not set
# FREETZ_LIB_libipt_ECN is not set
# FREETZ_LIB_libipt_icmp is not set
# FREETZ_LIB_libipt_ipp2p is not set
FREETZ_LIB_libipt_LOG=y
# FREETZ_LIB_libipt_MASQUERADE is not set
# FREETZ_LIB_libipt_MIRROR is not set
# FREETZ_LIB_libipt_NETMAP is not set
# FREETZ_LIB_libipt_policy is not set
# FREETZ_LIB_libipt_realm is not set
# FREETZ_LIB_libipt_REDIRECT is not set
# FREETZ_LIB_libipt_REJECT is not set
# FREETZ_LIB_libipt_SAME is not set
# FREETZ_LIB_libipt_set is not set
# FREETZ_LIB_libipt_SET is not set
# FREETZ_LIB_libipt_SNAT is not set
# FREETZ_LIB_libipt_ttl is not set
# FREETZ_LIB_libipt_TTL is not set
# FREETZ_LIB_libipt_ULOG is not set
# FREETZ_LIB_libipt_unclean is not set

#
# Select shared libraries (both IPv4 and IPv6)
#
# FREETZ_LIB_libxt_CLASSIFY is not set
# FREETZ_LIB_libxt_comment is not set
# FREETZ_LIB_libxt_connbytes is not set
# FREETZ_LIB_libxt_connmark is not set
# FREETZ_LIB_libxt_CONNMARK is not set
# FREETZ_LIB_libxt_CONNSECMARK is not set
# FREETZ_LIB_libxt_conntrack is not set
# FREETZ_LIB_libxt_dscp is not set
# FREETZ_LIB_libxt_DSCP is not set
# FREETZ_LIB_libxt_esp is not set
# FREETZ_LIB_libxt_hashlimit is not set
# FREETZ_LIB_libxt_helper is not set
FREETZ_LIB_libxt_iprange=y
# FREETZ_LIB_libxt_length is not set
# FREETZ_LIB_libxt_limit is not set
# FREETZ_LIB_libxt_mac is not set
# FREETZ_LIB_libxt_mark is not set
# FREETZ_LIB_libxt_MARK is not set
FREETZ_LIB_libxt_multiport=y
# FREETZ_LIB_xt_NFLOG is not set
# FREETZ_LIB_libxt_NFQUEUE is not set
# FREETZ_LIB_libxt_NOTRACK is not set
# FREETZ_LIB_libxt_owner is not set
# FREETZ_LIB_libxt_physdev is not set
# FREETZ_LIB_libxt_pkttype is not set
# FREETZ_LIB_libxt_quota is not set
# FREETZ_LIB_libxt_rateest is not set
# FREETZ_LIB_libxt_RATEEST is not set
# FREETZ_LIB_libxt_sctp is not set
# FREETZ_LIB_libxt_SECMARK is not set
FREETZ_LIB_libxt_standard=y
FREETZ_LIB_libxt_state=y
# FREETZ_LIB_libxt_statistic is not set
# FREETZ_LIB_libxt_string is not set
# FREETZ_LIB_libxt_tcpmss is not set
# FREETZ_LIB_libxt_TCPMSS is not set
FREETZ_LIB_libxt_tcp=y
# FREETZ_LIB_libxt_time is not set
# FREETZ_LIB_libxt_tos is not set
# FREETZ_LIB_libxt_TOS is not set
# FREETZ_LIB_libxt_TRACE is not set
# FREETZ_LIB_libxt_u32 is not set
FREETZ_LIB_libxt_udp=y
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_PHPXMAIL is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
FREETZ_PACKAGE_VIRTUALIP_CGI=y
# FREETZ_PACKAGE_VNSTAT_CGI is not set
FREETZ_PACKAGE_WOL_CGI=y

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_GOCR is not set
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LFTP is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NCFTP is not set
# FREETZ_PACKAGE_NETPBM is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
FREETZ_PACKAGE_NFS_UTILS=y
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_SSHD is not set
# FREETZ_PACKAGE_OPENSSH_CLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SCP is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_SFTPCLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PHP is not set
FREETZ_PACKAGE_PORTMAP=y
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_PPPD_CHAT is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SPAWN_FCGI is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SUBVERSION is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
FREETZ_PACKAGE_TCP_WRAPPERS=y
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_TMUX is not set
# FREETZ_PACKAGE_UNRAR is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_VNSTAT is not set
# FREETZ_PACKAGE_VTUN is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XMAIL is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
FREETZ_SHOW_UNSTABLE_PACKAGES=y

#
# Unstable
#
# FREETZ_PACKAGE_COLLECTD is not set
# FREETZ_PACKAGE_HPLIP is not set
# FREETZ_PACKAGE_HP_UTILS is not set

#
# CAUTION: Use of module ip_conntrack can lead to spontaneous reboots
#
# FREETZ_PACKAGE_IPTABLES_CGI is not set

#
# Select kernel modules (IPv4)
#

#
# Select shared libraries (IPv4)
#

#
# Select shared libraries (both IPv4 and IPv6)
#
# FREETZ_PACKAGE_MDEV is not set

#
# SANE
#
# FREETZ_PACKAGE_SANE_BACKENDS is not set
# FREETZ_PACKAGE_TINC is not set
# FREETZ_PACKAGE_USBIP is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SITE="@AVM/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7170.29.04.76.image"
FREETZ_DL_SOURCE_MD5="3f9a9eb803bd36b31a908acdf5ca28b9"
FREETZ_DL_SITE2="http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20701%20V"
FREETZ_DL_SOURCE2="fw_Speedport_W701V_v33.04.57.image"
FREETZ_DL_SOURCE2_MD5="e34713bd989c3e266a4650c133582510"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
# FREETZ_BACKUP_CONFIG_CACHE is not set
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""
FREETZ_CUSTOM_IMAGE_NAME=y
# FREETZ_CUSTOM_IMAGE_NAME_PREFIX is not set

#
# Info pages
#
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
# FREETZ_REMOVE_DOT_CONFIG is not set

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_ETHER_WAKE=y
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_REALPATH=y
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_LONG_OPTS is not set
FREETZ_BUSYBOX_MD5SUM=y
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# Kernel modules
#

#
# crypto
#
# FREETZ_MODULE_aes is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set
# FREETZ_MODULE_option is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext3 is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
# FREETZ_MODULE_fuse is not set
# FREETZ_MODULE_jbd is not set
FREETZ_MODULE_lockd=y
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
FREETZ_MODULE_sunrpc=y

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libapr is not set
# FREETZ_LIB_libaprutil is not set
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GMP ------------------------------------
#
# FREETZ_LIB_libgmp is not set

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
# FREETZ_LIB_libavmhmac is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# e2fsprogs libraries
#
# FREETZ_LIB_libblkid is not set
# FREETZ_LIB_libcom_err is not set
# FREETZ_LIB_libe2p is not set
# FREETZ_LIB_libext2fs is not set
# FREETZ_LIB_libss is not set
# FREETZ_LIB_libuuid is not set

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set
# FREETZ_LIB_libgd is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
# FREETZ_LIB_libutil is not set
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgio_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
FREETZ_LIB_libcapi20=y
# FREETZ_LIB_libcurl is not set
FREETZ_LIB_libevent=y
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libnetpbm is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
FREETZ_LIB_libpcre=y
FREETZ_LIB_libpcreposix=y

#
# Compiler options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_KERNEL_VERSION_2_6_13_1=y
# FREETZ_KERNEL_VERSION_2_6_19_2 is not set
FREETZ_KERNEL_VERSION="2.6.13.1"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_30 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

Mit einen mit speed-to-fritz erstelltes Image funktioniert dagegen alles super

byteeater · 8 Jan 2010

mtd3 & 4 gelöscht?
und wäre eher ne sache fürs freetz unterforum...
*hüstel*

jocale · 8 Jan 2010

sorry für das falsche Forum, bitte verschieben

Habe es gerade nochmals ausprobiert und mtd3 und mtd4 gelöscht, Problem bleibt bestehen

jocale · 11 Jan 2010

Ich bitte nochmals um Hilfe.

Habe es bis jetzt nur geschafft das die Fritz nur den Anrufbeantworter nach einen Reboot löscht und das auch nur weil ich vor dem Einspielen eines Freetz Images die Fritz nicht resetet habe. Ich weiß, sollte man immer machen, ich habe es nur vergessen.

Vorher war ein speed-to-fritz Image drauf. Resete ich die Box vorher, dann löscht sie immer alle Telefoniegeräte nach ein Reboot.

Ich habe auch schon versucht verschiedene Sachen, wie Patches und Pakette wegzulassen beim erstellen des Images mit freetz, es ändert nichts am Verhalten der Fritz!Box.

byteeater · 11 Jan 2010

Code:

cat /proc/sys/urloader/envoirment

und direkt nach nem reboot sobald du wieder per telnet oder ssh rann kommst

Code:

demsg

würd mich mal interessieren

alligator_asl · 11 Jan 2010

Hallo jocale,

vielleicht ist Dein Image schlicht und ergreifend etwas zo gross?
Benutze selber einen gefritzten und gefreetzten 701v, habe aber derartige Effekte noch nie gehabt. Ich versuche immer, einige nicht benötigte Dinge zu entfernen, um das Image möglichst kleinzuhalten. (siehe Signatur)

Gruss:
alligator_asl

jocale · 12 Jan 2010

Telnet:demsg und cat /proc/sys/urloader/envoirment

-sh: demsg: not found

cat: can't open '/proc/sys/urloader/envoirment': No such file or directory
/var/mod/root # cat /proc/sys/urloader/envoirment

Die kernel.image Datei ist 7,4 Mbyte groß

el_valiente · 12 Jan 2010

jocale schrieb:
... cat /proc/sys/urloader/envoirment

Schreibfehler von byteeater! Es heisst "environment", nicht "envoirment".
.

byteeater · 12 Jan 2010

Code:

dmesg
cat /proc/sys/urlader/environment

sorry für meine wegstabenverbuchsler, aber bischen ahnung von linux wäre von vorteil.

jocale · 12 Jan 2010

sorry für meine wegstabenverbuchsler, aber bischen ahnung von linux wäre von vorteil.

Habe ich auch und bin seit 4 Jahre nur noch mit Kubuntu unterwegs, aber ich einfach blind kopiert ohne zu überlegen

dmesg:

Code:

Linux version 2.6.13.1-ohio () (gcc version 3.4.6) #1 Tue Jan 12 01:53:44 CET 2010
memsize=32 MByte                                                                  
flashsize=8 MByte                                                                 
&_end=0x94264c64 PFN_ALIGN(&_end)=0x94265000 CPHYSADDR(PFN_ALIGN(&_end))=0x14265000 memsize=0x2000000
CPU revision is: 00018448                                                                            
[ohio_gpio_init]                                                                                     
Determined physical RAM map:                                                                         
 memory: 00265000 @ 14000000 (reserved)                                                              
 memory: 01d9b000 @ 14265000 (usable)                                                                
On node 0 totalpages: 8192                                                                           
[alloc_node_mem_map] reduce size from 2883616 Bytes to  262176 Bytes                                 
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94268000-0x942a8020                   
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fe8000-0x942a8020                        
zone=0 zone_size[j]=0x90112                                                                          
realsize=8192                                                                                        
  DMA zone: 8192 pages, LIFO batch:3                                                                 
zone=1 zone_size[j]=0x0                                                                              
realsize=0                                                                                           
  Normal zone: 0 pages, LIFO batch:1                                                                 
zone=2 zone_size[j]=0x0                                                                              
realsize=0                                                                                           
  HighMem zone: 0 pages, LIFO batch:1                                                                
Built 1 zonelists                                                                                    
Kernel command line: console=ttyS0,38400                                                             
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x30)                      
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.                         
Primary data cache 8kB, 4-way, linesize 16 bytes.                                                    
Synthesized TLB refill handler (20 instructions). Base=0x942241dc                                    
TLB synthesizer field overflow (simm)                                                                
Synthesized TLB load handler fastpath (34 instructions) Base=0x94227620.                             
TLB synthesizer field overflow (simm)                                                                
Synthesized TLB store handler fastpath (34 instructions) Base=0x94227820.                            
TLB synthesizer field overflow (simm)                                                                
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94227a20.                           
PID hash table entries: 256 (order: 8, 4096 bytes)                                                   
CPU frequency 211.97 MHz                                                                             
Using 105.984 MHz high precision timer.                                                              
[setup_irq]: irq 255 irqaction->handler 0x94043850 (no_action+0x0/0x8 )                              
[register_console] enable commandline console 0                                                      
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)                                        
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                         
Memory: 29952k/30316k available (1674k kernel code, 320k reserved, 405k data, 116k init, 0k highmem) 
totalram_pages= 7499                                                                                 
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)                                              
loops_per_jiffy=1056768                                                                              
Mount-cache hash table entries: 512                                                                  
Checking for 'wait' instruction...  available.                                                       
Calling initcall 0x942173c8: helper_init+0x0/0x38()                                                  
Calling initcall 0x94217690: ksysfs_init+0x0/0x3c()                                                  
Calling initcall 0x942196e0: filelock_init+0x0/0x48()                                                
Calling initcall 0x9421a000: init_script_binfmt+0x0/0xc()                                            
Calling initcall 0x9421a00c: init_elf_binfmt+0x0/0xc()                                               
Calling initcall 0x9421f21c: netlink_proto_init+0x0/0x2ac()                                          
NET: Registered protocol family 16                                                                   
Calling initcall 0x9421a8b0: kobject_uevent_init+0x0/0x50()                                          
Calling initcall 0x9421ab38: tty_class_init+0x0/0x34()                                               
Calling initcall 0x9420e2c8: frame_info_init+0x0/0xb4()                                              
Can't analyze prologue code at 941a104c                                                              
Calling initcall 0x942193d0: init_bio+0x0/0x17c()                                                    
Calling initcall 0x9421b1e4: misc_init+0x0/0xc0()                                                    
Calling initcall 0x9421cf3c: genhd_device_init+0x0/0x44()                                            
Calling initcall 0x9421d654: init_mtd+0x0/0x48()                                                     
Calling initcall 0x9421e274: input_init+0x0/0x1e0()                                                  
Calling initcall 0x9421e7ac: proto_init+0x0/0x48()                                                   
Calling initcall 0x9421e970: net_dev_init+0x0/0x1f0()                                                
Calling initcall 0x9421f114: pktsched_init+0x0/0xc8()                                                
Calling initcall 0x9421f1e8: tc_filter_init+0x0/0x34()                                               
Calling initcall 0x94219634: init_pipe_fs+0x0/0x6c()                                                 
Calling initcall 0x9421a9c8: chr_dev_init+0x0/0xb4()                                                 
Calling initcall 0x942169e8: create_proc_profile+0x0/0x64()                                          
Calling initcall 0x94216ac8: ioresources_init+0x0/0xc4()                                             
Calling initcall 0x94216cd4: uid_cache_init+0x0/0x88()                                               
Calling initcall 0x942170b8: param_sysfs_init+0x0/0x208()                                            
Calling initcall 0x942172c0: init_posix_timers+0x0/0x108()                                           
Calling initcall 0x94217400: init_posix_cpu_timers+0x0/0xd4()                                        
Calling initcall 0x94217650: kallsyms_init+0x0/0x40()                                                
Calling initcall 0x942189f0: init_per_zone_pages_min+0x0/0x64()                                      
Calling initcall 0x94218e34: pdflush_init+0x0/0x28()                                                 
Calling initcall 0x94218e5c: cpucache_init+0x0/0x20()                                                
Calling initcall 0x942191e4: kswapd_init+0x0/0x70()                                                  
Calling initcall 0x94219298: procswaps_init+0x0/0x40()                                               
Calling initcall 0x942192d8: init_tmpfs+0x0/0x3c()                                                   
Calling initcall 0x942196a0: fasync_init+0x0/0x40()                                                  
Calling initcall 0x94219da4: aio_setup+0x0/0x8c()                                                    
Calling initcall 0x94219e30: inotify_setup+0x0/0xf4()                                                
Calling initcall 0x94219f24: eventpoll_init+0x0/0xdc()                                               
Calling initcall 0x9421a55c: init_devpts_fs+0x0/0x48()                                               
Calling initcall 0x9421a5a4: init_squashfs_fs+0x0/0x90()                                             
squashfs: version 3.3 (2007/10/31) Phillip Lougher                                                   
Calling initcall 0x9421a634: init_ramfs_fs+0x0/0xc()                                                 
Calling initcall 0x9421a64c: ipc_init+0x0/0x30()                                                     
Calling initcall 0x9421a840: init_crypto+0x0/0x34()                                                  
Initializing Cryptographic API                                                                       
Calling initcall 0x9421aa7c: rand_initialize+0x0/0x3c()                                              
Calling initcall 0x9421ab6c: tty_init+0x0/0x184()                                                    
Calling initcall 0x9421acf0: pty_init+0x0/0x4f4()                                                    
Calling initcall 0x9421b2a4: avm_net_trace_init+0x0/0x80()                                           
avm_net_trace: Up and running.                                                                       
Calling initcall 0x9421b324: avm_power_init+0x0/0x320()                                              
[avm_power]Ohio250 detected -> overclocking possible                                                 
Calling initcall 0x9421b644: avm_sammel_init+0x0/0x158()                                             
[avm] configured: watchdog eventled enable shift register enable direct gpio                         
        gpio usage: reset=12 clock=13 store=10 data=9                                                
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jan 12 2010 01:52:33)                  
Calling initcall 0x9421c58c: serial8250_init+0x0/0x10c()                                             
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled                            
[uart_add_one_port]                                                                                  
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART                                                          
[uart_add_one_port] dont register console port->type = 16                                            
port->cons = 0x941e6350 port->cons->flags = 0x7                                                      
[uart_add_one_port] success                                                                          
Calling initcall 0x9421cf80: noop_init+0x0/0xc()                                                     
io scheduler noop registered                                                                         
Calling initcall 0x9421cf8c: cpphy_entry_probe+0x0/0x440()                                           
[cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.104-r759-trunk-PHY_Zuordnung_7212  -  Revision 538:760  -  Mi 16. Feb 13:01:10 CET 2009
[avm_event_source_trigger]: not registered                                                                                                                  
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered                                                                                                
Calling initcall 0x9421d45c: net_olddevs_init+0x0/0x100()                                                                                                   
Calling initcall 0x9421d5c4: tun_init+0x0/0x90()                                                                                                            
tun: Universal TUN/TAP device driver, 1.6                                                                                                                   
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>                                                                                                      
Calling initcall 0x9421d69c: cmdline_parser_init+0x0/0xc()                                                                                                  
Calling initcall 0x9421d6a8: init_mtdchar+0x0/0xc0()                                                                                                        
Calling initcall 0x9421d768: init_mtdblock+0x0/0xc()                                                                                                        
Calling initcall 0x9421d774: cfi_probe_init+0x0/0x24()                                                                                                      
Calling initcall 0x9421d798: cfi_amdstd_init+0x0/0x30()                                                                                                     
Calling initcall 0x9421d7c8: cfi_intelext_init+0x0/0x4c()                                                                                                   
Calling initcall 0x9421d814: jedec_probe_init+0x0/0x24()                                                                                                    
Calling initcall 0x9421d838: map_ram_init+0x0/0x24()                                                                                                        
Calling initcall 0x9421d85c: init_physmap+0x0/0x180()                                                                                                       
physmap flash device: 400000 at 10000000                                                                                                                    
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank                                                                                                
 Amd/Fujitsu Extended Query Table at 0x0040                                                                                                                 
phys_mapped_flash: Swapping erase regions for broken CFI table.                                                                                             
number of CFI chips: 1                                                                                                                                      
RedBoot partition parsing not available                                                                                                                     
Calling initcall 0x9421d9dc: platram_init+0x0/0x30()                                                                                                        
Generic platform RAM MTD, (c) 2004 Simtec Electronics                                                                                                       
Calling initcall 0x9421da0c: init_ohio_flash+0x0/0x868()                                                                                                    
Ohio flash driver (size->0x400000 mem->0x10000000)                                                                                                          
flash_size=0x800000                                                                                                                                         
flash_mask=0xffffff                                                                                                                                         
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank                                                                                                
[genprobe_ident_chips] 4 i 0 j 0                                                                                                                            
[genprobe_ident_chips] 5 i 0 j 1                                                                                                                            
 Amd/Fujitsu Extended Query Table at 0x0040                                                                                                                 
Ohio flash memory: Swapping erase regions for broken CFI table.                                                                                             
number of CFI chips: 1                                                                                                                                      
[mtd]: jffs2_size = 9 * 64KByte (0x90000 Bytes)                                                                                                             
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x0/5776598                                                                                   
[init_ohio_flash] find hidden filesystem size=0x6c3900 offset=0xbc700                                                                                       
[mtd] configure jffs2 partition                                                                                                                             
[mtd] fs_size=0x630000 max=0x140000 is=0x90000 max jffs2_size value 20                                                                                      
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000                                                      
Creating 7 MTD partitions on "Ohio flash memory":                                                                                                           
0x000bc700-0x00780000 : "filesystem"                                                                                                                        
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only                                                                     
0x00010000-0x00780000 : "kernel"                                                                                                                            
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
0x00000000-0x00010000 : "bootloader"                                                                                                                        
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
0x00780000-0x007c0000 : "tffs (1)"                                                                                                                          
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
0x007c0000-0x00800000 : "tffs (2)"                                                                                                                          
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
0x006f0000-0x00780000 : "jffs2"                                                                                                                             
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
0x00010000-0x006f0000 : "Kernel without jffs2"                                                                                                              
        'nor-flash'                                                                                                                                         
        'Bits can be cleared (flash)'                                                                                                                       
        'Has an erase function'                                                                                                                             
partition_info[0]: name=filesystem offset=bc700 size=6c3900                                                                                                 
partition_info[0]: 0xb00bc700: 0x73717368 0x898                                                                                                             
partition_info[1]: name=kernel offset=10000 size=770000                                                                                                     
partition_info[1]: 0xb0010000: 0xfeed1281 0xac639                                                                                                           
partition_info[2]: name=bootloader offset=0 size=10000                                                                                                      
partition_info[2]: 0xb0000000: 0x40809000 0x40809800                                                                                                        
partition_info[3]: name=tffs (1) offset=780000 size=40000                                                                                                   
partition_info[3]: 0xb0780000: 0x40001 0xfeffffff                                                                                                           
partition_info[4]: name=tffs (2) offset=7c0000 size=40000                                                                                                   
partition_info[4]: 0xb07c0000: 0x40001 0xfeffffff                                                                                                           
partition_info[5]: name=jffs2 offset=6f0000 size=90000                                                                                                      
partition_info[5]: 0xb06f0000: 0x20031985 0xc                                                                                                               
partition_info[6]: name=Kernel without jffs2 offset=10000 size=6e0000                                                                                       
partition_info[6]: 0xb0010000: 0xfeed1281 0xac639                                                                                                           
Calling initcall 0x9421e454: kcapi_init+0x0/0x9c()                                                                                                          
Calling initcall 0x9421e598: capi_oslib_init+0x0/0x8()                                                                                                      
Calling initcall 0x9421ec9c: flow_cache_init+0x0/0x164()                                                                                                    
Calling initcall 0x9421f1dc: blackhole_module_init+0x0/0xc()                                                                                                
Calling initcall 0x9421ff48: inet_init+0x0/0x504()                                                                                                          
NET: Registered protocol family 2                                                                                                                           
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                                                                                              
TCP established hash table entries: 2048 (order: 2, 16384 bytes)                                                                                            
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)                                                                                                    
TCP: Hash tables configured (established 2048 bind 2048)                                                                                                    
TCP reno registered                                                                                                                                         
Calling initcall 0x94222970: init+0x0/0x8()                                                                                                                 
Calling initcall 0x94222978: bictcp_register+0x0/0xc()                                                                                                      
TCP bic registered                                                                                                                                          
Calling initcall 0x942229b4: mcfw_init_module+0x0/0x2c()                                                                                                    
mcfw: IGMPv3 fast forwarding                                                                                                                                
Calling initcall 0x94222b38: af_unix_init+0x0/0xa0()                                                                                                        
NET: Registered protocol family 1                                                                                                                           
Calling initcall 0x94222bd8: packet_init+0x0/0x80()                                                                                                         
NET: Registered protocol family 17                                                                                                                          
Calling initcall 0x94222c58: br_init+0x0/0x68()                                                                                                             
Calling initcall 0x94222d14: atm_init+0x0/0xec()                                                                                                            
NET: Registered protocol family 8                                                                                                                           
NET: Registered protocol family 20                                                                                                                          
Calling initcall 0x94222eb8: br2684_init+0x0/0x54()                                                                                                         
Calling initcall 0x94222f0c: vlan_proto_init+0x0/0xf4()                                                                                                     
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>                                                                                               
All bugs added by David S. Miller <[email protected]>                                                                                                        
Calling initcall 0x9420d028: ohio_install_dummy_irq_functions+0x0/0x58()                                                                                    
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )                                                                                
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )                                                                             
Calling initcall 0x940017e4: ohio_late_init+0x0/0x3c()                                                                                                      
[ohio_late_init]                                                                                                                                            
Calling initcall 0x9420d164: ohio_clk_switch_init+0x0/0x60()                                                                                                
Calling initcall 0x9420d3e0: speedup_init+0x0/0x3c()                                                                                                        
Calling initcall 0x9421aab8: seqgen_init+0x0/0x20()                                                                                                         
Calling initcall 0x940d5b10: avm_event_push_button_init+0x0/0x130()                                                                                         
[avm_new] push_button_gpio=8 value=1 enabled                                                                                                                
Calling initcall 0x9421be00: tffs_init+0x0/0x224()                                                                                                          
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)                                                                                       
      mount on mtd4 and mtd5 (double buffering)                                                                                                             
Adam2 environment variables API installed.                                                                                                                  
Calling initcall 0x9421cc50: early_uart_console_switch+0x0/0xb4()                                                                                           
Calling initcall 0x94133168: net_random_reseed+0x0/0x34()                                                                                                   
Calling initcall 0x94221468: ip_auto_config+0x0/0x1130()                                                                                                    
[prepare_namespace] new mount root /dev/mtdblock1                                                                                                           
NumProbs = 7990 / 2 -> 15980                                                                                                                                
VFS: Mounted root (squashfs filesystem) readonly.                                                                                                           
Freeing prom memory: 0kb freed                                                                                                                              
Freeing unused kernel memory: 116k freed (7528 free)                                                                                                        
[setup_irq]: irq 15 irqaction->handler 0x940e1d7c (serial8250_interrupt+0x0/0x13c )                                                                         
[avm_led] "tam",0 ! already defined                                                                                                                         
[avm_led] format error: "DEF Name,Instanz = low_level_driver_index, gpio_number, physical_pin_number, physical_pin_name"                                    
[avm_led_load_config] Syntax error in led config file /etc/led.conf at "DEF tam,0 = 99,32,21"                                                               
AR7WDT: System Init UEberwachung 240 Sekunden                                                                                                               
TFFS Name Table F                                                                                                                                           
[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=6250 key=button_key_3                                                                          
Piglet: module license '                                                                                                                                    
(C) Copyright 2005 by AVM                                                                                                                                   
' taints kernel.                                                                                                                                            
[avm_new]push_button_ctrl: gpio=6 value=0 enabled                                                                                                           
[avm_new]push_button_ctrl:'Werkseinstellungs-Taster': enable=2 gpio=6 regaddr=00000000 button_type=1                                                        
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1                                                                                                      
[avm_new]push_button_ctrl:'ATA-Schalter': enable=1 gpio=0 regaddr=be00002c button_type=2                                                                    
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.                                                                                                       
registered device TI Avalanche SAR                                                                                                                          
tiatm driver (patch_annex=0xc013e0cc)                                                                                                                       
[tiatm] Set StrictPriority=0                                                                                                                                
DSP binary filesize = 329848 bytes                                                                                                                          
[dsl_ur8] dsl serial number successfully set to "465249545a21426f7820466f6e20537065656470303031433441373643323043"                                          
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019                                                                                                                 
[avm_power]Ohio250 detected -> overclocking possible                                                                                                        
[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####                                                                                            
[setup_irq]: irq 23 irqaction->handler 0xc0124208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )                                                                        
[setup_irq]: irq 31 irqaction->handler 0xc0124238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )                                                                        
[tiatm]: Powermanagment (States => 1,3,10) supported!                                                                                                       
Texas Instruments ATM driver: version:[4.08.01.00]                                                                                                          
[tiatm] AvmInterface length: 44                                                                                                                             
ubik2 driver (ubik2 - 0x10=0xc0098fd4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0086bfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c10ad0
ubik2_init_interface: DSP-Link Version v3 8480
driver params overwritten io_addr=0x0 irq_num=0
[setup_irq]: irq 28 irqaction->handler 0xc0091af0 (soft_interrupt_handler+0x0/0x30 [ubik2] )
capicodec_init()
[capi_codec] support fax
[capi_codec] support Codecs
[setup_irq]: irq 27 irqaction->handler 0x940f2a8c (cpmac_main_isr+0x0/0x78 )
[cpmac] [cpmac_main_ioctl] unknown ioctl 35142
device cpmac0 entered promiscuous mode
device eth0 entered promiscuous mode
lan: port 1(eth0) entering learning state
lan: topology change detected, propagating
lan: port 1(eth0) entering forwarding state
mcfw: group 0.0.0.0: query cpmac:0 10sec
[avm_power] : ethernet port 0 status 2
[capi_oslib] capi_installed -1470028800
[avm_power] : ethernet port 1 status 1
[avm_power] : ethernet port 2 status 1
[avm_power] : ethernet port 3 status 1
[avm_new]push_button_notify 'ATA-Schalter', key=button_key_7
[capi_oslib] capi_installed -1811532468
AR7WDT: System Init UEberwachung abgeschlossen (208990 ms noch verfuegbar)
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=99 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=84 mul=154 div=10 offset=974 NormP=2514 mW -> SumNormP=2514 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=83 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=4957 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=5897 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=5997 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=6097 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=300 act_rate=0 mul=141 div=10 offset=100 NormP=4330 mW -> SumNormP=10427 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10427 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=587202891 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=10944 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10944 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=22 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=14017 mW
SysRq : Changing Loglevel
Loglevel set to 4
[avm_new]push_button_notify 'ATA-Schalter', key=button_key_7
[capi_oslib] capi_installed -1811532468
/proc/tffs: info request: success

cat /proc/sys/urlader/environment

Code:

HWRevision      101.1.1.0
ProductID       Fritz_Box_SpeedportW701V
SerialNumber    0000000000000000
annex   B
autoload        yes
bootloaderVersion       1.267
bootserport     tty0
bluetooth
cpufrequency    211968000
firstfreeaddress        0x946A5D98
firmware_version        avm
firmware_info   29.04.76
flashsize       0x00800000
jffs2_size      9
kernel_args     console=ttyS0,38400
maca    00:1C:4A:76:C2:0A
macb    00:1C:4A:76:C2:0B
macwlan 00:1C:4A:40:FB:78
macdsl  00:1C:4A:76:C2:0C
memsize 0x02000000
modetty0        38400,n,8,1,hw
modetty1        38400,n,8,1,hw
mtd0    0x90000000,0x90000000
mtd1    0x90010000,0x90780000
mtd2    0x90000000,0x90010000
mtd3    0x90780000,0x907C0000
mtd4    0x907C0000,0x90800000
my_ipaddress    192.168.178.1
prompt  Eva_AVM
reserved
req_fullrate_freq       125000000
sysfrequency    125000000
urlader-version 1267
usb_board_mac   00:1C:4A:76:C2:0D
usb_rndis_mac   00:1C:4A:76:C2:0E
usb_device_id   0x0000
usb_revision_id 0x0000
usb_manufacturer_name   AVM
wlan_cal        0013,03E4,001A,00E1,010A,00E1,010A,0346,0335
/var/mod/root #

Aber ich habe ein neues Image erstellt und nur das Nötigste mit reingepackt und siehe da, jetzt vergißt die Fritz!Box nichts mehr.
Es lag also an meine Gier, viele Pakette reinzupacken.

Freetz-Info

byteeater · 12 Jan 2010

jocale schrieb:
Aber ich habe ein neues Image erstellt und nur das Nötigste mit reingepackt und siehe da, jetzt vergißt die Fritz!Box nichts mehr.
Es lag also an meine Gier, viele Pakette reinzupacken.

fein, das das geklärt ist. machst bitte nen gelöst in den titel deines ersten postings?

jocale · 12 Jan 2010

Ok, habe ich. Aber kann einer sagen wie groß das Image ungefähr sein sollte bzw ab welche Größe wird es kritisch?

Edit Ernest015: Weiter gehts hier, ich hab das mal abgetrennt, weil das erste Problem ja gelöst zu sein scheint.

Languages

Suche

Languages

Suche

[gelöst] gefrizter Speedport 701v vergisst Einstellung zu Telefoniergeräte

jocale

Mitglied

byteeater

Neuer User

jocale

Mitglied

jocale

Mitglied

byteeater

Neuer User

alligator_asl

Neuer User

jocale

Mitglied

el_valiente

Aktives Mitglied

byteeater

Neuer User

jocale

Mitglied

Anhänge

byteeater

Neuer User

jocale

Mitglied

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums