[gelöst] kein Busy zu hören

[Knaut]

ich weiss nicht mehr weiter:

bei Besetzt bekomme ich nur Ruhe, will aber Besetzt Zeichen

CLI:

    -- Executing Macro("Zap/5-1", "normal|(ZAP/g2/91XXXX|91XXXX") in new stack
    -- Executing Dial("Zap/5-1", "ZAP/g1/(ZAP/g2/91XXXX|30") in new stack
Aug 11 09:31:04 NOTICE[4044]: app_dial.c:1076 dial_exec_full: Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion)
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing Goto("Zap/5-1", "s-CONGESTION|1") in new stack
    -- Goto (macro-normal,s-CONGESTION,1)
    -- Executing Goto("Zap/5-1", "s-BUSY|1") in new stack
    -- Goto (macro-normal,s-BUSY,1)
    -- Executing Busy("Zap/5-1", "10") in new stack
  == Spawn extension (macro-normal, s-BUSY, 1) exited non-zero on 'Zap/5-1' in macro 'normal'
  == Spawn extension (macro-normal, s-BUSY, 1) exited non-zero on 'Zap/5-1'
Aug 11 09:31:15 ERROR[4044]: chan_zap.c:2780 zt_hangup: What is wrong with you? You cannot use cause 34 number when in state 7!
    -- Hungup 'Zap/5-1'

extensions.conf

[isdn_incoming]
exten => _91XXXX,1,Dial(ZAP/g2/${EXTEN},60)
;exten => _91XXXX,n,Busy()
exten => _91XXXX,n,Macro(normal|(ZAP/g2/${EXTEN}|${EXTEN})

[macro-normal];
;  ${ARG1} - anzurufendes(s) Gerät(e) (z.B. SIP/123&SIP/124)
;  ${ARG2} - Mailbox (oft gleich ${MACRO_EXTEN})
;exten => s,1,Dial(${ARG1},30)               ; max. 30 Sekunden klingeln
exten => s,1,Dial(ZAP/g1/${ARG1},30)  
exten => s,n,Goto(s-${DIALSTATUS},1)        ; zum Status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
;exten => s-NOANSWER,1,VoiceMail(${ARG2},u)  ; Ansage "nicht erreichbar"
;exten => s-NOANSWER,1,VoiceMail(${ARG2},u)  ; Ansage "nicht erreichbar"
;exten => s-BUSY,1,VoiceMail(${ARG2},b)      ; Ansage "besetzt"
exten => s-BUSY,1,busy(10)
;exten => s-BUSY,1,Playback(demo-moreinfo)
exten => s-BUSY,n,Playtones(busy)
;exten => s-BUSY,n,Wait(10)
;exten => s-BUSY,n,Hangup
exten => s-ANSWER,1,Hangup()                ; zur Sicherheit nach Gespräch auflegen
;exten => _s-.,1,Goto(s-NOANSWER,1)          ; alles andere wie nicht erreichbar behandeln
exten => _s-.,1,Goto(s-BUSY,1)          ; alles andere wie nicht erreichbar behandeln

Asterisk 1.2.13-BRIstuffed-0.3.0-PRE-1v auf Etch


Schönes wochenende


edit: einfach

priindication = outofband

in die zapata.conf