.titleBar { margin-bottom: 5px!important; }

[gelöst] Webinterface ab und an nicht mehr erreichbar wo liegt das Problem ?

Dieses Thema im Forum "Freetz" wurde erstellt von BoxcarRacer, 26 Okt. 2008.

  1. BoxcarRacer

    BoxcarRacer Guest

    #1 BoxcarRacer, 26 Okt. 2008
    Zuletzt von einem Moderator bearbeitet: 26 Okt. 2008
    Hallo,

    vor paar Wochen mit dem Freetz angefangen und wollte mich nun an etwas mehr wagen. Und zwar wollte ich nun auch meine Restlichen Pakete einbinden und schon gibt es Probleme.

    Sobald ich fritz.box eingebe ko kommt:

    Code:
    Firefox kann keine Verbindung zu dem Server unter 192.168.178.1 aufbauen.
    Obwohl die Website gültig erscheint, konnte keine Verbindung aufgebaut werden.
    Komisch ist, das ich die Box nach ein paar Stunden wieder erreiche so war es mal beim ersten mal. Erst dachte ich auf ein Fehler beim erstellen und flashte daher noch einmal. Sobald ist die Zugangsdaten eingebe ist die Verbindung zum Webinf nicht möglich (Internet geht aber).

    Hier mal der Eintrag meiner Config:

    Code:
    /mainmenu "Freetz Configuration"
    
    config FREETZ_HAVE_DOT_CONFIG
    	bool
    	default y
    
    comment "General --------------------------------"
    
    config FREETZ_AVM_VERSION_04_29
    	bool
    config FREETZ_AVM_VERSION_04_30
    	bool
    config FREETZ_AVM_VERSION_04_33
    	bool
    config FREETZ_AVM_VERSION_04_40
    	bool
    config FREETZ_AVM_VERSION_04_49
    	bool
    config FREETZ_AVM_VERSION_04_57
    	bool
    config FREETZ_AVM_VERSION_12043
    	bool
    config FREETZ_AVM_VERSION_7270
    	bool
    config FREETZ_AVM_VERSION_r4884
    	bool
    config FREETZ_AVM_VERSION_r7203
    	bool
    config FREETZ_AVM_VERSION_r8508
    	bool
    
    choice
    
    	prompt "Hardware type"
    		default FREETZ_TYPE_FON_WLAN_7170
    		help
    			Select your box type here.
    
    	config FREETZ_TYPE_300IP_AS_FON
    		select FREETZ_AVM_VERSION_04_49
    		bool "300IP as Fon"
    		select FREETZ_BRANDING_tcom
    		select FREETZ_BRANDING_avm
    
    	config FREETZ_TYPE_2170
    		select FREETZ_AVM_VERSION_04_57
    		bool "2170"
    
    	config FREETZ_TYPE_FON
    		select FREETZ_AVM_VERSION_04_49
    		bool "Fon"
    
    	config FREETZ_TYPE_FON_5010
    		select FREETZ_AVM_VERSION_04_40
    		bool "Fon 5010"
    
    	config FREETZ_TYPE_FON_5050
    		select FREETZ_AVM_VERSION_04_33
    		bool "Fon 5050"
    
    	config FREETZ_TYPE_FON_5140
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon 5140"
    
    	config FREETZ_TYPE_FON_WLAN
    		select FREETZ_AVM_VERSION_04_33
    		bool "Fon WLAN"
    
    	config FREETZ_TYPE_FON_WLAN_7050
    		select FREETZ_AVM_VERSION_04_33
    		bool "Fon WLAN 7050"
    
    	config FREETZ_TYPE_FON_WLAN_7113
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon WLAN 7113"
    
    	config FREETZ_TYPE_FON_WLAN_7140
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon WLAN 7140"
    
    	config FREETZ_TYPE_FON_WLAN_7141
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon WLAN 7141"
    
    	config FREETZ_TYPE_FON_7150
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon 7150"
    
    	config FREETZ_TYPE_FON_WLAN_7170
    		select FREETZ_AVM_VERSION_04_57
    		bool "Fon WLAN 7170"
    	
    	config FREETZ_TYPE_FON_WLAN_7270
    		select FREETZ_AVM_VERSION_12043
    		bool "Fon WLAN 7270"
    	
    	config FREETZ_TYPE_WLAN_3020
    		select FREETZ_AVM_VERSION_04_33
    		bool "WLAN 3020"
    
    	config FREETZ_TYPE_WLAN_3030
    		select FREETZ_AVM_VERSION_04_33
    		bool "WLAN 3030"
    
    	config FREETZ_TYPE_WLAN_3130
    		select FREETZ_AVM_VERSION_04_33
    		bool "WLAN 3130"
    
    	config FREETZ_TYPE_WLAN_3131
    		select FREETZ_AVM_VERSION_04_57
    		bool "WLAN 3131"
    
    	config FREETZ_TYPE_WLAN_3170
    		select FREETZ_AVM_VERSION_04_57
    		bool "WLAN 3170"
    	
    	config FREETZ_TYPE_WLAN_3270
    		select FREETZ_AVM_VERSION_7270
    		bool "WLAN 3270"
    
    	config FREETZ_TYPE_SPEEDPORT_W501V
    		select FREETZ_AVM_VERSION_r7203
    		select FREETZ_BRANDING_tcom
    		bool "Speedport W501V"
    
    	config FREETZ_TYPE_SPEEDPORT_W701V
    		select FREETZ_AVM_VERSION_r8508
    		select FREETZ_BRANDING_tcom
    		bool "Speedport W701V"
    
    #	config FREETZ_TYPE_SPEEDPORT_W900V
    #		select FREETZ_AVM_VERSION_r4884
    #		select FREETZ_BRANDING_tcom
    #		bool "Speedport W900V"
    
    	config FREETZ_TYPE_CUSTOM
    		bool "Custom"
    		depends on FREETZ_SHOW_ADVANCED
    		select FREETZ_DL_OVERRIDE
    
    endchoice
    
    config FREETZ_TYPE_FON_WLAN_7270_16MB
    	bool "16 MB flash"
    	depends on \
    		FREETZ_TYPE_FON_WLAN_7270
    	default n
    	help
    		Enable this to build an image for boxes with 16 MB flash.
    
    config FREETZ_TYPE_LABOR
    	bool "Beta/Labor/VPN"
    	depends on \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270
    	default n
    	help
    		Enable this to compile the mod based on an AVM "beta/labor/vpn" firmware.
    
    choice
    
    	prompt "Labor version"
    		depends on FREETZ_TYPE_LABOR
    		default FREETZ_TYPE_LABOR_MINI
    
    #	config FREETZ_TYPE_LABOR_BETA
    #		bool "BETA"
    #		depends on \
    #			( \
    #			FREETZ_TYPE_FON_WLAN_7170 || \
    #			FREETZ_TYPE_FON_WLAN_7270 \
    #			)
    
    	config FREETZ_TYPE_LABOR_ALL
    		bool "All In One"
    		depends on \
    			( \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_FON_WLAN_7270 \
    			)
    
    	config FREETZ_TYPE_LABOR_DSL
    		bool "DSL"
    		depends on \
    			( \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_FON_WLAN_7270 \
    			)
    
    	config FREETZ_TYPE_LABOR_GAMING
    		bool "GAMING"
    		depends on ( \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_FON_WLAN_7270 \
    		)
    
    	config FREETZ_TYPE_LABOR_MINI
    		bool "MINI"
    		depends on \
    			FREETZ_TYPE_FON_WLAN_7141 || \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_FON_WLAN_7270
    	
    	config FREETZ_TYPE_LABOR_PHONE
    		bool "PHONE"
    		depends on \
    			FREETZ_TYPE_FON_WLAN_7270
    
    	config FREETZ_TYPE_LABOR_WLAN
    		bool "Labor WLAN / 11n"
    		depends on \
    			FREETZ_TYPE_FON_WLAN_7270
    
    endchoice
    
    config FREETZ_TYPE_ALIEN_HARDWARE
    	bool "Compile image for \"alien\" hardware"
    	depends on \
    		FREETZ_TYPE_FON_WLAN_7170
    	default n
    	help
    		Enable this to compile the mod image for another hardware type
    
    choice
    	prompt "Alien hardware type"
    	depends on FREETZ_TYPE_ALIEN_HARDWARE
    	#default FREETZ_TYPE_SINUS_W500V_7150 if FREETZ_TYPE_FON_7150
    	default FREETZ_TYPE_SPEEDPORT_W701V_7170 if FREETZ_TYPE_FON_WLAN_7170
    
    	#config FREETZ_TYPE_SINUS_W500V_7150
    	#	bool "Sinus W500V"
    	#	depends on FREETZ_TYPE_FON_7150
    	#	select FREETZ_BRANDING_tcom
    	#	select FREETZ_MODULE_jffs2
    	#	help
    	#		Enable this to compile a mod image for T-Com Sinus W500V based
    	#		on a 7150 image.
    
    	config FREETZ_TYPE_SPEEDPORT_W701V_7170
    		bool "W701V"
    		depends on FREETZ_TYPE_FON_WLAN_7170
    		select FREETZ_BRANDING_tcom
    		help
    			Enable this to compile a mod image for T-Com Speedport W701V based
    			on a 7170 image.
    
    	config FREETZ_TYPE_SPEEDPORT_W900V_7170
    		bool "W900V"
    		depends on FREETZ_TYPE_FON_WLAN_7170
    		select FREETZ_BRANDING_tcom
    		help
    			Enable this to compile a mod image for T-Com Speedport W900V based
    			on a 7170 image.
    
    endchoice
    
    config FREETZ_AVM_VERSION_STRING
    	string
    	default "04.29"			if FREETZ_AVM_VERSION_04_29
    	default "04.30"			if FREETZ_AVM_VERSION_04_30
    	default "04.33"			if FREETZ_AVM_VERSION_04_33
    	default "04.40"			if FREETZ_AVM_VERSION_04_40
    	default "04.49"			if FREETZ_AVM_VERSION_04_49
    	default "04.57"			if FREETZ_AVM_VERSION_04_57
    	default "7270"			if FREETZ_AVM_VERSION_7270
    	default "12043"			if FREETZ_AVM_VERSION_12043
    	default "r4884"			if FREETZ_AVM_VERSION_r4884
    	default "r7203"			if FREETZ_AVM_VERSION_r7203
    	default "r8508"			if FREETZ_AVM_VERSION_r8508
    
    choice
    
    	prompt "Firmware language"
    		default FREETZ_TYPE_LANG_DE
    
    	config FREETZ_TYPE_LANG_DE
    		bool "de - deutsch"
    		depends on \
    			! FREETZ_TYPE_FON_5010
    
    	config FREETZ_TYPE_LANG_A_CH
    		bool "a-ch - deutsch"
    		depends on \
    			! FREETZ_TYPE_LABOR && \
    			! FREETZ_TYPE_ALIEN_HARDWARE && \
    			( \
    			FREETZ_TYPE_FON_5010 || \
    			FREETZ_TYPE_FON_WLAN_7140 || \
    			FREETZ_TYPE_FON_WLAN_7170 \
    			)
    
    	config FREETZ_TYPE_LANG_EN
    		bool "en - international"
    		depends on \
    			! FREETZ_TYPE_LABOR && \
    			! FREETZ_TYPE_ALIEN_HARDWARE && \
    			( \
    			FREETZ_TYPE_FON || \
    			FREETZ_TYPE_300IP_AS_FON || \
    			FREETZ_TYPE_FON_WLAN || \
    			FREETZ_TYPE_FON_WLAN_7140 || \
    			FREETZ_TYPE_FON_WLAN_7170 \
    			)
    
    endchoice
    
    config FREETZ_TYPE_LANG_STRING
    	string
    	default "de"		if FREETZ_TYPE_LANG_DE
    	default "a-ch"		if FREETZ_TYPE_LANG_A_CH
    	default "en"		if FREETZ_TYPE_LANG_EN
    
    choice
    
    	prompt "Annex"
    		depends on FREETZ_TYPE_LANG_EN
    		default FREETZ_TYPE_ANNEX_B
    
    	config FREETZ_TYPE_ANNEX_A
    		bool "A"
    
    	config FREETZ_TYPE_ANNEX_B
    		bool "B"
    
    endchoice
    
    config FREETZ_TYPE_STRING
    	string
    	default "300ip_as_fon"					if FREETZ_TYPE_300IP_AS_FON
    	default "2170"						if FREETZ_TYPE_2170 && ! FREETZ_TYPE_LABOR
    	default "3020"						if FREETZ_TYPE_WLAN_3020
    	default "3030"						if FREETZ_TYPE_WLAN_3030
    	default "3130"						if FREETZ_TYPE_WLAN_3130
    	default "3131"						if FREETZ_TYPE_WLAN_3131
    	default "3170"						if FREETZ_TYPE_WLAN_3170
    	default "3270"						if FREETZ_TYPE_WLAN_3270
    	default "fon"						if FREETZ_TYPE_FON
    	default "5010"						if FREETZ_TYPE_FON_5010
    	default "5050"						if FREETZ_TYPE_FON_5050
    	default "5140"						if FREETZ_TYPE_FON_5140
    	default "fon_wlan"					if FREETZ_TYPE_FON_WLAN
    	default "7050"						if FREETZ_TYPE_FON_WLAN_7050
    	default "7113"						if FREETZ_TYPE_FON_WLAN_7113
    	default "7140"						if FREETZ_TYPE_FON_WLAN_7140
    	default "7141"						if FREETZ_TYPE_FON_WLAN_7141 && ! FREETZ_TYPE_LABOR
    	default "7141_labor_mini"				if FREETZ_TYPE_FON_WLAN_7141 && FREETZ_TYPE_LABOR_MINI
    	default "7150"						if FREETZ_TYPE_FON_7150
    	default "7170"						if FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_LABOR
    	default "7170_beta"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_BETA
    	default "7170_labor_all"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_ALL
    	default "7170_labor_dsl"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_DSL
    	default "7170_labor_gaming"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_GAMING
    	default "7170_labor_mini"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_MINI
    	default "7170_labor_phone"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_PHONE
    	default "7270"						if FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_LABOR
    	default "7270_beta"					if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_BETA
    	default "7270_labor_all"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_ALL
    	default "7270_labor_dsl"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_DSL
    	default "7270_labor_mini"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_MINI
    	default "7270_labor_phone"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_PHONE
    	default "7270_labor_gaming"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_GAMING
    	default "7270_labor_wlan"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_WLAN
    	default "W501V"						if FREETZ_TYPE_SPEEDPORT_W501V
    	default "W701V"						if FREETZ_TYPE_SPEEDPORT_W701V
    	default "W900V"						if FREETZ_TYPE_SPEEDPORT_W900V
    	default "custom"					if FREETZ_TYPE_CUSTOM
    
    config FREETZ_TYPE_STRING2
    	string
    	default "W500V_"					if FREETZ_TYPE_SINUS_W500V_7150
    	default "W701V_"					if FREETZ_TYPE_SPEEDPORT_W701V_7170
    	default "W900V_"					if FREETZ_TYPE_SPEEDPORT_W900V_7170
    
    comment "Custom options -------------------------"
    	depends on FREETZ_TYPE_CUSTOM
    
    config FREETZ_INSTALL_BASE
    	bool
    	select FREETZ_LIB_ld_uClibc
    	select FREETZ_LIB_libcrypt
    	select FREETZ_LIB_libdl
    	select FREETZ_LIB_libgcc_s
    	select FREETZ_LIB_libm
    	select FREETZ_LIB_libnsl
    	select FREETZ_LIB_libpthread
    	select FREETZ_LIB_librt
    	select FREETZ_LIB_libuClibc
    	default y
    	help
    		This is mandatory
    
    config FREETZ_REPLACE_BUSYBOX
    	bool
    	default y
    	help
    		This is mandatory
    
    config FREETZ_REPLACE_KERNEL_AVAILABLE
    	bool
    	depends on \
    		! FREETZ_TYPE_LABOR && \
    		! (FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN) && \
    		! FREETZ_TYPE_WLAN_3270
    	default y
    
    config FREETZ_REPLACE_KERNEL
    	bool "Replace kernel"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		FREETZ_REPLACE_KERNEL_AVAILABLE
    	default n
    	help
    		Replace AVM kernel with self-built kernel.
    
    comment "Replace kernel (currently not available)"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		! FREETZ_REPLACE_KERNEL_AVAILABLE
    
    config FREETZ_SHOW_ADVANCED
    	bool "Show advanced options"
    	default n
    	help
    		Show advanced Options for patching the firmware. This is only useful
    		for experienced users who really know what they are doing
    
    config FREETZ_TARGET_REF
    	string "Target ref"		if FREETZ_TYPE_CUSTOM
    	default "8mb_26"		if \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3270 
    	default "4mb_26"		if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050
    
    config FREETZ_KERNEL_REF
    	string "Kernel ref"		if FREETZ_TYPE_CUSTOM
    	default "8mb_26"		if \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3270 
    	default "4mb_26"		if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050
    
    config FREETZ_KERNEL_LAYOUT
    	string "Kernel ref"		if FREETZ_TYPE_CUSTOM
    	default "ohio"			if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V
    	default "ar7"			if \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030
    	default "ur8"			if \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3270 
    
    	
    config FREETZ_KERNEL_MTD_SIZE
    	int "Kernel (64K blocks)"	if FREETZ_TYPE_CUSTOM
    	default 59				if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050
    	default 119					if \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		(FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_FON_WLAN_7270_16MB) || \
    		FREETZ_TYPE_CUSTOM && FREETZ_HIDDEN_ROOT
    	default 246					if \
    		FREETZ_TYPE_WLAN_3270 || \
    		FREETZ_TYPE_FON_WLAN_7270_16MB
    	help
    		Number of 64K blocks in the kernel mtd device.
    
    config FREETZ_FILESYSTEM_MTD_SIZE
    	int "Filesystem (64K blocks)"	if FREETZ_TYPE_CUSTOM
    	depends on ! FREETZ_HIDDEN_ROOT || FREETZ_CONTIGUOUS_HIDDEN_ROOT
    	default 48			if FREETZ_TYPE_CUSTOM
    	help
    		Number of 64K blocks in the filesystem mtd device.
    
    config FREETZ_HAS_PHONE
    	bool "Has Phone"		if FREETZ_TYPE_CUSTOM
    	default y				if \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_CUSTOM
    	default n				if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_WLAN_3270
    
    	help
    		Select this if you have a box with phone support.
    
    config FREETZ_HAS_WLAN
    	bool "Has WLAN"		if FREETZ_TYPE_CUSTOM
    	default y			if \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_WLAN_3270 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_CUSTOM
    	default n			if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_300IP_AS_FON
    	help
    		Select this if you have a box with WLAN.
    
    config FREETZ_HAS_USB_CLIENT
    	bool "USB client"		if FREETZ_TYPE_CUSTOM
    	default y				if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050
    	default n				if \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3270 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_CUSTOM
    	help
    		Select this if you have a box with USB.
    
    config FREETZ_HAS_USB_HOST
    	bool "USB host"		if FREETZ_TYPE_CUSTOM
    	default y			if \
    		FREETZ_TYPE_2170 || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_7150 && ! FREETZ_TYPE_SINUS_W500V_7150 || \
    		FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_WLAN_3131 || \
    		FREETZ_TYPE_WLAN_3170 || \
    		FREETZ_TYPE_WLAN_3270 || \
    		FREETZ_TYPE_SPEEDPORT_W900V
    	default n			if \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_5010 || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SINUS_W500V_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W701V_7170 
    	help
    		Select this if your USB port is a host adapter
    
    menu "Branding"
    	depends on \
    		! FREETZ_TYPE_SPEEDPORT_W501V && \
    		! FREETZ_TYPE_SPEEDPORT_W701V && \
    		! FREETZ_TYPE_SPEEDPORT_W900V
    
    #comment "Brandings ------------------------------"
    #	depends on \
    #		( \
    #		! FREETZ_TYPE_SPEEDPORT_W501V && \
    #		! FREETZ_TYPE_SPEEDPORT_W701V && \
    #		! FREETZ_TYPE_SPEEDPORT_W900V && \
    #		! FREETZ_TYPE_CUSTOM \
    #		)
    
    #comment "Brandings (if exist) -------------------"
    #	depends on FREETZ_TYPE_CUSTOM && FREETZ_SHOW_ADVANCED
    
    config FREETZ_BRANDING_1und1
    	bool "1&1"
    	depends on \
    		FREETZ_TYPE_LANG_DE && \
    		( \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_FON_5050 || \
    		FREETZ_TYPE_FON_5140 || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270 || \
    		FREETZ_TYPE_WLAN_3020 || \
    		FREETZ_TYPE_WLAN_3030 || \
    		FREETZ_TYPE_WLAN_3130 || \
    		FREETZ_TYPE_CUSTOM \
    		) \
    		&& ! FREETZ_TYPE_ALIEN_HARDWARE
    	default y
    	help
    		1&1 branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_avm
    	bool "AVM"
    	depends on \
    		( \
    		! FREETZ_BRANDING_tcom && \
    		FREETZ_TYPE_LANG_A_CH || \
    		FREETZ_TYPE_LANG_DE || \
    		FREETZ_TYPE_CUSTOM \
    		)
    	default y
    	help
    		AVM branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_avme
    	bool "AVM international"
    	depends on \
    		( \
    		FREETZ_TYPE_LANG_EN || \
    		FREETZ_TYPE_CUSTOM \
    		)
    	default y
    	help
    		AVM international branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_aol
    	bool "AOL"
    	depends on \
    		FREETZ_TYPE_LANG_DE && \
    		( \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_FON_WLAN_7140 || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_CUSTOM \
    		)
    	default y
    	help
    		AOL branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_arcor
    	bool "Arcor"
    	depends on FREETZ_TYPE_CUSTOM
    	default y
    	help
    		Arcor branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_congstar
    	bool "Congstar"
    	depends on \
    		FREETZ_TYPE_SPEEDPORT_W701V 
    	default y
    	help
    		Congstar branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_freenet
    	bool "Freenet"
    	depends on \
    		FREETZ_TYPE_LANG_DE && \
    		( \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON_WLAN_7113 || \
    		FREETZ_TYPE_FON_WLAN_7141 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_CUSTOM \
    		) \
    		&& ! FREETZ_TYPE_ALIEN_HARDWARE
    	default y
    	help
    		Freenet branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_tcom
    	bool "T-Com"
    	depends on \
    		FREETZ_TYPE_LANG_DE && \
    		( \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_ALIEN_HARDWARE \
    		)
    	default y
    	help
    		T-Com branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    config FREETZ_BRANDING_versatel
    	bool "Versatel"
    	depends on \
    		FREETZ_TYPE_WLAN_3131
    	default y
    	help
    		Versatel branding
    
    		Each branding provides the web UI templates for a certain manufacturer or OEM.
    
    		NOTE: Make sure to choose at least one branding corresponding to the one
    		defined in your box's boot loader environment. It can be determined by calling
    		the following command from the box's shell prompt:
    
    		echo $(cat /proc/sys/urlader/firmware_version)
    
    endmenu
    
    comment "Mod ------------------------------------"
    
    choice
    
    	prompt "Language"
    	default FREETZ_LANG_DE		if FREETZ_TYPE_LANG_DE
    	default FREETZ_LANG_DE		if FREETZ_TYPE_LANG_A_CH
    	default FREETZ_LANG_EN		if FREETZ_TYPE_LANG_EN
    
    	config FREETZ_LANG_DE
    		bool "de - deutsch"
    
    	config FREETZ_LANG_EN
    		bool "en - english"
    
    endchoice
    
    config FREETZ_LANG_STRING
    	string
    	default "de"			if FREETZ_LANG_DE
    	default "en"			if FREETZ_LANG_EN
    
    menu "Patches"
    
    config FREETZ_REMOVE_HELP
    	bool "Remove help"
    	default n
    	help
    		Removes the help pages from the web menu.
    
    config FREETZ_REMOVE_ASSISTANT
    	bool "Remove assistant"
    	default n
    	depends on \
    		! FREETZ_TYPE_FON_WLAN_7270
    	help
    		Removes the installation assistant from the web menu.
    
    config FREETZ_REMOVE_TR069
    	bool "Remove tr069 stuff"
    	depends on \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 || \
    		FREETZ_TYPE_FON_7150 || \
    		FREETZ_TYPE_FON_WLAN_7170 || \
    		FREETZ_TYPE_FON_WLAN_7270
    	default n
    	help
    		Removes libtr069 to save space.
    
    config FREETZ_REMOVE_USB_MODULE
    	bool "Remove avalanche_usb.ko"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		( \
    		FREETZ_TYPE_300IP_AS_FON || \
    		FREETZ_TYPE_FON || \
    		FREETZ_TYPE_FON_WLAN || \
    		FREETZ_TYPE_FON_WLAN_7050 \
    		)
    	default n
    	help
    		Removes avalanche_usb.ko to save space.
    
    config FREETZ_REMOVE_CDROM_ISO
    	bool "Remove cdrom.iso"
    	depends on \
    			FREETZ_HAS_USB_CLIENT && \
    			( \
    			! FREETZ_TYPE_2170 && \
    			! FREETZ_TYPE_FON_WLAN_7050 && \
    			! FREETZ_TYPE_WLAN_3130 && \
    			! FREETZ_TYPE_WLAN_3170 \
    			)
    	default n
    	help
    		Removes the file /lib/modules/cdrom.iso.
    
    config FREETZ_PATCH_ATA
    	bool "Patch ATA"
    	depends on \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W900V
    	default n
    	help
    		Patches the ATA mode configuration pages into the web menu.
    
    config FREETZ_PATCH_DSL_EXPERT
            bool "Patch extended DSL-Settings"
            depends on \
    					FREETZ_TYPE_LABOR_ALL
            default n
            help
                    Patches the extended dsl-settings from labor-dsl into all-in-one-firmwares. 
    
    config FREETZ_PATCH_ENUM
    	bool "Patch enum"
    	depends on FREETZ_HAS_PHONE
    	default n
    	help
    		Patches the enum configuration pages into the web menu.
    
    #config FREETZ_PATCH_INTERNATIONAL
    #	bool "Patch international"
    #	depends on FREETZ_HAS_PHONE && FREETZ_TYPE_LANG_DE && ! FREETZ_TYPE_SPEEDPORT_W900V
    #	default y
    #	help
    #		Reveals some options from the international firmware in the web menu.
    
    config FREETZ_PATCH_SIGNED
    	bool "Patch web menu signed message"
    	default n
    	help
    		Hides the "unsupported changes" message from the web interface.
    
    config FREETZ_PATCH_USBSTORAGE
    	bool "Patch USB storage names, make FAT filesystems world-writable, automount feature"
    	depends on \
    		FREETZ_HAS_USB_HOST #&& \
    		#! FREETZ_TYPE_SPEEDPORT_W701V_7170
    	default y
    	help
    		1. Change the name of USB storage dir to uStorXY
    
    		2. Auto-mounted USB storage devices will be fully accessible, i.e. it
    		is now possible to put user home directories for (e.g. for FTP) on a
    		FAT32-formatted partition and permit shell and FTP users to actually
    		write to their own home directories.
    
    		3. Avoid deleting whole filesystem on usb devices.
    
    		It is highly recommended to select this patch.
    
    config FREETZ_USBSTORAGE_AUTOMOUNT
    	bool "Automount filesystems"
    	depends on FREETZ_PATCH_USBSTORAGE
    	select FREETZ_PACKAGE_FSTYP
    	default y
    	help
    		ext2, ext3, fat and ntfs filesystems are mounted automatically. Detection is done
    		by fstyp utility (adds about 8KB uncompressed size). It depends on the original
    		firmware wich of the following points you have to select.
    
    config FREETZ_AUTOMOUNT_EXT2
    	bool "ext2"
    	depends on FREETZ_USBSTORAGE_AUTOMOUNT
    	select FREETZ_MODULE_ext2
    	default n
    	help
    		This adds ext2 module to your firmware.
    
    config FREETZ_AUTOMOUNT_EXT3
    	bool "ext3"
    	depends on FREETZ_USBSTORAGE_AUTOMOUNT
    	select FREETZ_MODULE_ext3
    	default n
    	help
    		This adds ext3 module to your firmware.		
    
    config FREETZ_AUTOMOUNT_NTFS
    	bool "NTFS"
    	depends on FREETZ_USBSTORAGE_AUTOMOUNT
    	select FREETZ_PACKAGE_NTFS
    	default n
    	help
    		This adds ntfs-3g mount helper to your firmware.
    
    config FREETZ_AUTORUN_AUTOEND
    	bool "Execute autorun.sh/autoend.sh script on (un)mount"
    	depends on FREETZ_HAS_USB_HOST
    	default n
    	help
    		Useful to start/terminate applications located on USB devices, eg apache,
    		samba or even swapfiles.
    
    config FREETZ_PATCH_MAXDEVCOUNT
    	bool "Raise the count of connectable usb device to 9"
    	depends on FREETZ_HAS_USB_HOST
    	default n
    	help
    		Use this patch if you would connect more than 3 device to the box
    
    config FREETZ_PATCH_GETCONS
    	bool "Don't redirect console messages"
    	default n
    	help
    		Patch /etc/profile so that console messages are not redirected to
    		/dev/pts/0. These can sometimes be very anoying.
    
    config FREETZ_REMOVE_WEBSRV
    	bool "Replace AVM web server by httpd"
    	depends on \
    		! FREETZ_TYPE_2170 \
    		&& ! FREETZ_TYPE_FON_5140 \
    		&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN ) \
    		&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH ) \
    		&& ! ( FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN ) \
    		&& ! ( FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN ) \
    		&& ! ( FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN ) \
    		&& ! FREETZ_TYPE_FON_WLAN_7141 \
    		&& ! FREETZ_TYPE_FON_WLAN_7170 \
    		&& ! FREETZ_TYPE_FON_WLAN_7270 \
    		&& ! FREETZ_TYPE_WLAN_3131 \
    		&& ! FREETZ_TYPE_WLAN_3170
    
    	default n
    	help
    		Patch init scripts so BusyBox's httpd is used instead of AVM's websrv.
    		The websrv binary will be removed from the firmware image.
    
    		If "Remove UPnP daemon (igdd)" patch is also selected and "Integrate
    		Media Server from USB Labor firmware" is not selected, 'libwebsrv.so'
    		will also be removed, because only those three binaries use it.
    
    config FREETZ_REMOVE_UPNP
    	bool "Remove UPnP daemon (igdd)"
    	select FREETZ_REMOVE_UPNP_LIBS if \
    			( \
    			! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN ) \
    			&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH ) \
    			&& ! FREETZ_TYPE_FON_WLAN_7141 \
    			&& ! FREETZ_TYPE_FON_WLAN_7170 \
    			&& ! FREETZ_TYPE_FON_WLAN_7270 \
    			&& ! FREETZ_TYPE_WLAN_3131 \
    			&& ! FREETZ_TYPE_WLAN_3170 \
    			)
    	default n
    	help
    		Remove Universal Plug'n'Play daemon 'igdd' and some more files used by
    		it from firmware. Patch init scripts so they can cope with the
    		non-existent binary.
    
    		ATTENTION: Fritz!Fax relies on UPnP.
    		Make sure you deactivate all UPnP features in the web menu
    		before updating the firmware with this option. It may not be harmful
    		not to deactivate it, but there is no guarantee. You can find the
    		settings in the German web UI under
    		  Einstellungen
    		    System
    		      Netzwerkeinstellungen
    		        Statusinformationen über UPnP übertragen (empfohlen)
    
    config FREETZ_REMOVE_UPNP_LIBS
    	bool 
    	depends on FREETZ_REMOVE_UPNP
    	default n
    
    config FREETZ_REMOVE_USERMAN
    	bool "Remove usermand and userman.ko - EXPERIMENTAL"
    	depends on \
    		! FREETZ_TYPE_FON_5140 \
    		&& ! FREETZ_TYPE_FON_WLAN_7113 \
    		&& ! FREETZ_TYPE_SPEEDPORT_W501V \
    		&& ! FREETZ_TYPE_SPEEDPORT_W900V
    	default n
    	help
    		Remove userman files (Kindersicherung)
    
    config FREETZ_REMOVE_FTPD
    	bool "Remove ftpd"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		( \
    			FREETZ_HAS_USB_HOST && \
    			! FREETZ_TYPE_SPEEDPORT_W701V_7170 \\
    		)
    	default n
    	help
    		Remove FTP deamon (ftpd)
    		This patch removes AVM's ftp daemon. The regular options in AVM's Webinterface
    		are still present. If you select this item your USB drives won't be accessible 
    		through ftp anymore. But you can use Freetz bftpd/vsftpd package to grant ftp
    		access to the devices.
    
    config FREETZ_REMOVE_MEDIASRV
    	bool "Remove mediasrv"
    	depends on \
    	FREETZ_SHOW_ADVANCED && \
    	! FREETZ_PATCH_MEDIASRV && \
    	( \
    		FREETZ_HAS_USB_HOST && \
    		! FREETZ_TYPE_SPEEDPORT_W701V_7170 \
    	)
    	default n
    	help
    		Remove MediaServer daemon (mediasrv)
    		This patch removes only the deamon. The regular options in AVM's webinterface 
    		are still present.
    
    config FREETZ_REMOVE_SMBD
    	bool "Remove smbd"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		! FREETZ_PACKAGE_SAMBA && \
    		( \
    		(FREETZ_HAS_USB_HOST && ! FREETZ_TYPE_FON_7150) && \
    		! FREETZ_TYPE_SPEEDPORT_W701V_7170 \
    		)
    	default n
    	help
    		Remove Samba daemon (smbd)
    		This patch removes only the daemon. The regular options in AVM's webinterface 
    		are still present.
    
    config FREETZ_REMOVE_MINID
    	bool "Remove minid - EXPERIMENTAL"
    	default n
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		( \
    			FREETZ_TYPE_FON_WLAN_7141 || \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_WLAN_3270 \
    		) && \
    		! FREETZ_TYPE_SPEEDPORT_W701V_7170
    		
    	help
    		Remove the mini-daemon (minid) and some other related files.
    		This patch removes Fritz!Mini support but only the files,
    		not the settings in AVM's webinterface.
    
    config FREETZ_REMOVE_AURA_USB
    	bool "Remove aura usb - EXPERIMENTAL"
    	default n
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		( \
    			FREETZ_TYPE_2170 || \
    			FREETZ_TYPE_FON_7150 || \
    			FREETZ_TYPE_FON_WLAN_7141 || \
    			FREETZ_TYPE_FON_WLAN_7170 || \
    			FREETZ_TYPE_WLAN_3170 \
    		) && \
    		! FREETZ_TYPE_SPEEDPORT_W701V_7170
    
    	help
    		Remove the aura-usb-daemon (USB-Fernanschluss) and some related files. 
    		This patch only removes the files, not the settings in AVM's webinterface
    
    config FREETZ_REMOVE_AVM_VPN
    	bool "Remove AVM vpn - EXPERIMENTAL"
    	default n
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		( \
    			FREETZ_TYPE_2170 || \
    			(FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_DE) || \
    			FREETZ_TYPE_FON_WLAN_7270 || \
    			FREETZ_TYPE_WLAN_3170 \
    		)
    
    	help
    		Remove AVM's vpn and some other related files
    		This patch only removes the files, not the settings in AVM's webinterface
    
    config FREETZ_REMOVE_DSLD
    	bool "Remove dsld (for boxes in IP client mode) - EXPERIMENTAL"	
    	default n
    	depends on FREETZ_SHOW_ADVANCED
    	select FREETZ_REMOVE_UPNP
    	select FREETZ_REMOVE_USERMAN if ! (FREETZ_TYPE_FON_5140 || FREETZ_TYPE_FON_WLAN_7113 || FREETZ_TYPE_SPEEDPORT_W501V || FREETZ_TYPE_SPEEDPORT_W900V)
    	help
    		Remove DSL deamon (dsld), if you are planning to use your box as a simple
    		IP client in ATA mode.
    
    		ATTENTION: Do *not* use this option if your ATA mode box uses PPoE
    		passthrough, because in this case dsld is still needed! Furthermore,
    		selecting this patch also selects the UPnP patch, because UPnP must be
    		deactivated anyway for IP clients, otherwise dsld will be used again.
    		You can find the UPnP settings in the German web UI under
    		  Einstellungen
    		    System
    		      Netzwerkeinstellungen
    		        Statusinformationen über UPnP übertragen (empfohlen)
    		Thirdly, the usermand patch will also be selected if you activate this option,
    		because kernel module userman.ko always depends on kdsldmod.ko which is
    		stripped by this patch.
    
    		EXPERIMENTAL FEATURE, USE AT OWN RISK!
    
    config FREETZ_REMOVE_CAPIOVERTCP
    	bool "Remove CAPIoverTCP (used for Fritz!Fax) - EXPERIMENTAL"
    	default n
    	help
    		Remove CAPIoverTCP (capiotcp_server). Use this if you don't wat to use
    		Fritz!Fax or any other program that uses AVM's CAPIoverTCP. This is similar
    		to rcapid, but independant.
    		This will save about 15kB uncompressed size.
    
    		EXPERIMENTAL FEATURE, USE AT OWN RISK!
    
    config FREETZ_REMOVE_DECT 
    	bool "Remove DECT files - EXPERIMENTAL"
    	depends on \
    		FREETZ_TYPE_FON_WLAN_7270 || FREETZ_TYPE_SPEEDPORT_W900V_7170
    	default n
    	help
    		Remove dect files (modules, firmware and dect_manager an maybe Config-files).
    		(saves roundabout 20K compressed size on W900V)
    
    
    config FREETZ_REMOVE_DECT_UPDATE
    	bool"Remove dect_update - EXPERIMENTAL"
    	depends on \
    		FREETZ_TYPE_FON_7150
    	default n
    	help
    		Remove /usr/bin/dect_update. This utility is only needed to 
    		update the dect firmware.
    		This will save about 32kB uncompressed size.
    
    		EXPERIMENTAL FEATURE, USE AT OWN RISK!
    
    config FREETZ_REMOVE_VOIP_ISDN
    	bool "Remove VoIP & ISDN files (for non-telephony boxes) - EXPERIMENTAL"
    	depends on \
    		FREETZ_SHOW_ADVANCED && \
    		FREETZ_HAS_PHONE
    	select FREETZ_REMOVE_DECT if FREETZ_TYPE_FON_WLAN_7270 
    	default n
    	help
    		Radically remove a lot of telephony-related files. This patch saves about
    		2.370 KB or 2.3 MB of uncompressed data size in the firmware image. This
    		means savings of about 700 KB of compressed firmware size.
    
    		ATTENTION: Currently there have not been a whole lot of tests concerning
    		side effects. The patch was successfully tested on a W701V IP client with
    		removed UPnP/dsld/userman. If it still works for boxes including those
    		functionalities, is unknown. Feel free to test it.
    
    		NOTE: Corresponding web UI files will also be removed, so you will
    		encounter several empty web pages or submenus.
    
    		EXPERIMENTAL FEATURE, USE AT OWN RISK!
    
    config FREETZ_REMOVE_ANNEX_A_FIRMWARE
    	bool "Remove Annex A firmware file"
    	depends on FREETZ_TYPE_FON_WLAN_7270
    	default n
    	help
    		Remove lib/modules/dsp_ur8/ur8-A-dsl.bin. This saves about 400 KB of
    		uncompressed data size.
    
    config FREETZ_REMOVE_ANNEX_B_FIRMWARE
    	bool "Remove Annex B firmware file"
    	depends on FREETZ_TYPE_FON_WLAN_7270
    	default n
    	help
    		Remove lib/modules/dsp_ur8/ur8-B-dsl.bin. This saves about 400 KB of
    		uncompressed data size.
    
    comment "WARNING: Both Annex firmware files will be removed."
    	depends on FREETZ_REMOVE_ANNEX_A_FIRMWARE && FREETZ_REMOVE_ANNEX_B_FIRMWARE
    
    endmenu
    
    menu "Package selection"
    
    #config FREETZ_BUILD_DYNAMIC_PACKAGES
    #	bool "Build dynamic packages (NOT SUPPORTED YET)"
    #	default n
    #	help
    #		If this is selected, all packages, which are not
    #		selected, will be build as dynamic packages.
    
    source make/Config.in
    
    endmenu
    
    menu "Advanced options"
    
    config FREETZ_DL_OVERRIDE
    	bool "Override firmware source"
    	default n
    	help
    		Enable this to override automatically generated entries.
    
    config FREETZ_DL_SITE
    	string "Firmware site"		if FREETZ_DL_OVERRIDE
    	depends on ! FREETZ_TYPE_LABOR
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.2170/firmware/deutsch"						if FREETZ_TYPE_2170
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/deutsch"						if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_DE
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_a"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_b"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/deutsch"						if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_DE
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_a"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_b"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5010/firmware/deutsch_a-ch"			if FREETZ_TYPE_FON_5010 && FREETZ_TYPE_LANG_A_CH
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5050/firmware"							if FREETZ_TYPE_FON_5050
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5140/firmware"							if FREETZ_TYPE_FON_5140
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/deutsch"					if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_DE
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/english/annex_a"			if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/english/annex_b"			if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7050/firmware"					if FREETZ_TYPE_FON_WLAN_7050
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7113/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7113
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_DE
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/deutsch_a-ch"		if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/english/annex_a"	if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/english/annex_b"	if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7141
    	default "ftp://ftp.avm.de/fritz.box/fritzfon.7150/firmware"								if FREETZ_TYPE_FON_7150
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_DE
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch_a-ch"		if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_A_CH
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/english/annex_a"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/english/annex_b"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7270
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.sl_wlan/firmware"							if FREETZ_TYPE_WLAN_3020
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3030/firmware"						if FREETZ_TYPE_WLAN_3030
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3130/firmware"						if FREETZ_TYPE_WLAN_3130
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3131/firmware/deutsch"				if FREETZ_TYPE_WLAN_3131
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3170/firmware/deutsch"				if FREETZ_TYPE_WLAN_3170
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3270/firmware/deutsch"				if FREETZ_TYPE_WLAN_3270
    	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport_W501V" 				if FREETZ_TYPE_SPEEDPORT_W501V
    	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20701%20V"		if FREETZ_TYPE_SPEEDPORT_W701V
    	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20900V"			if FREETZ_TYPE_SPEEDPORT_W900V
    	default "ftp://ftp.avm.de/fritz.box/..."												if FREETZ_TYPE_CUSTOM
    
    config FREETZ_DL_SOURCE
    	string "Firmware source"	if FREETZ_DL_OVERRIDE
    	default "FRITZ.Box_2170.51.04.57.image"						if FREETZ_TYPE_2170 && ! FREETZ_TYPE_LABOR
    	default "fritz.box_fon.06.04.33.image"						if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_DE
    	default "fritz.box_fon.annexa.en.06.04.49.image"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "fritz.box_fon.en.06.04.49.image"					if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "fritz.box_fon.06.04.33.image"						if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_DE
    	default "fritz.box_fon.annexa.en.06.04.49.image"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "fritz.box_fon.en.06.04.49.image"					if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "fritz.box_fon_5010.annexa.48.04.43.image"				if FREETZ_TYPE_FON_5010 && FREETZ_TYPE_LANG_A_CH
    	default "fritz.box_fon_5050.12.04.31.image"					if FREETZ_TYPE_FON_5050
    	default "FRITZ.Box_Fon_5140.43.04.59.image"					if FREETZ_TYPE_FON_5140
    	default "fritz.box_fon_wlan.08.04.34.image"					if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_DE
    	default "FRITZ.Box_Fon_WLAN.AnnexA.en.08.04.49.image"				if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "FRITZ.Box_Fon_WLAN.AnnexB.en.08.04.49.image"				if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "fritz.box_fon_wlan_7050.14.04.33.image"				if FREETZ_TYPE_FON_WLAN_7050
    	default "FRITZ.Box_Fon_WLAN_7113.60.04.61.image"				if FREETZ_TYPE_FON_WLAN_7113
    	default "fritz.box_fon_wlan_7140.annexb.30.04.33.image"				if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_DE
    	default "FRITZ.Box_Fon_WLAN_7140.AnnexA.en.39.04.57.image"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "FRITZ.Box_Fon_WLAN_7140.AnnexB.en.30.04.57.image"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "FRITZ.Box_Fon_WLAN_7140.AnnexA.39.04.57.image"				if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH
    	default "FRITZ.Box_Fon_WLAN_7141.40.04.59.image"				if FREETZ_TYPE_FON_WLAN_7141 && ! FREETZ_TYPE_LABOR
    	default "fritz_box_40_04_59-11763M.image"						if FREETZ_TYPE_FON_WLAN_7141 && FREETZ_TYPE_LABOR_MINI
    	default "FRITZ.Fon_7150.AnnexB.38.04.56.image"					if FREETZ_TYPE_FON_7150
    	default "FRITZ.Box_Fon_WLAN_7170.29.04.59.image"				if FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_LABOR && FREETZ_TYPE_LANG_DE
    	default "FRITZ.Box_Fon_WLAN_7170.AnnexA.58.04.57.image"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_A_CH
    	default "FRITZ.Box_Fon_WLAN_7170.AnnexA.en.58.04.57.image"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
    	default "FRITZ.Box_Fon_WLAN_7170.AnnexB.en.29.04.57.image"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
    	default "fritz_box_7170-beta-10954.image"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_BETA
    	default "FRITZ.Box_Fon_WLAN_7170.Labor.29.04.63-12537.image"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_ALL
    	default "fritz_box-labor-12526.image"						if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_DSL
    	default "Labor_FRITZ.Box_Fon_WLAN_7170_LabGAMING.AnnexB.29.04.93-11435.image"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_GAMING
    	default "fritz_box_29_04_59-11763M.image"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_MINI
    	default "FRITZ.Box_Fon_WLAN_7170_LabPHONE.AnnexB.29.04.97-10173.image"		if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_PHONE
    	default "FRITZ.Box_Fon_WLAN_7270.54.04.59.image"				if FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_LABOR
    	default "FRITZ_Box_Fon_WLAN_7270-beta-10576.image"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_BETA
    	default "FRITZ.Box_Fon_WLAN_7270.Labor.54.04.63-12657.image"			if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_ALL
    	default "fritz_box_54_04_59-11779M.image"					if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_MINI
    	default "FRITZ.Box_Fon_WLAN_7270_LabPHONE.AnnexB.54.04.97-11197.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_PHONE
    	default "FRITZ.Box_Fon_WLAN_7270_LabCORE.AnnexB.54.04.98-12028.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_WLAN
    	default "FRITZ.Box_Fon_WLAN_7270_LabGAMING.AnnexB.54.04.93-11632.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_GAMING
    	default "fritz_box-labor-12606.image"						if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_DSL
    	default "fritz.box_sl_wlan.09.04.34.image"					if FREETZ_TYPE_WLAN_3020
    	default "fritz.box_wlan_3030.21.04.34.image"					if FREETZ_TYPE_WLAN_3030
    	default "fritz.box_wlan_3130.44.04.34.image"					if FREETZ_TYPE_WLAN_3130
    	default "fritz.box_wlan_3131.50.04.57.image"					if FREETZ_TYPE_WLAN_3131
    	default "fritz.box_wlan_3170.49.04.58.image"					if FREETZ_TYPE_WLAN_3170
    	default "fritz.box_wlan_3270.67.04.57.image"					if FREETZ_TYPE_WLAN_3270
    	default "fw_Speedport_W501V_v_28.04.38.image"					if FREETZ_TYPE_SPEEDPORT_W501V
    	default "fw_Speedport_W701V_v33.04.57.image"					if FREETZ_TYPE_SPEEDPORT_W701V
    	default "fw_Speedport_W900V_v34.04.57.image"					if FREETZ_TYPE_SPEEDPORT_W900V
    	default "fritz.box..."								if FREETZ_TYPE_CUSTOM
    
    config FREETZ_DL_SITE2
    	string "AVM web interface DL Site"		if FREETZ_DL_OVERRIDE
    	depends on \
    		FREETZ_TYPE_SINUS_W500V_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_SPEEDPORT_W900V_7170
    	default "http://www.t-home.de/dlp/eki/downloads/Sinus%20W%20500%20V"				if FREETZ_TYPE_SINUS_W500V_7150
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch"		if FREETZ_TYPE_SPEEDPORT_W501V
    	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch" 		if FREETZ_TYPE_SPEEDPORT_W701V
    	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20701%20V"	if FREETZ_TYPE_SPEEDPORT_W701V_7170
    	default "ftp://ftp.avm.de/fritz.box/fritzfon.7150/firmware"							if FREETZ_TYPE_SPEEDPORT_W900V
    	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20900V"		if FREETZ_TYPE_SPEEDPORT_W900V_7170
    
    config FREETZ_DL_SOURCE2
    	string "AVM web interface firmware source"	if FREETZ_DL_OVERRIDE
    	depends on \
    		FREETZ_TYPE_SINUS_W500V_7150 || \
    		FREETZ_TYPE_SPEEDPORT_W501V || \
    		FREETZ_TYPE_SPEEDPORT_W701V || \
    		FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
    		FREETZ_TYPE_SPEEDPORT_W900V || \
    		FREETZ_TYPE_SPEEDPORT_W900V_7170
    	default "fritz.box_fon_wlan_7141.40.04.37.image"	if FREETZ_TYPE_SPEEDPORT_W501V
    	default "fritz.box_fon_wlan_7141.40.04.37.image"	if FREETZ_TYPE_SPEEDPORT_W701V
    	default "fw_Speedport_W701V_v33.04.57.image"		if FREETZ_TYPE_SPEEDPORT_W701V_7170
    	default "fritz.fon_7150.annexb.38.04.32.image"		if FREETZ_TYPE_SPEEDPORT_W900V
    	default "fw_Speedport_W900V_v34.04.57.image"		if FREETZ_TYPE_SPEEDPORT_W900V_7170
    	default "Sinus_W_500V.27.04.27.image"			if FREETZ_TYPE_SINUS_W500V_7150
    
    
    config FREETZ_DL_SOURCE2_CONTAINER
    	string
    	depends on \
    		FREETZ_TYPE_SINUS_W500V_7150
    	default "fw_SinusW500V_27_04_27.zip"			if FREETZ_TYPE_SINUS_W500V_7150
    
    
    menu "Freetz package download sites"
    
    # This is a fixed entry, it is invisible and cannot be changed by the user
    config FREETZ_MOD_DL_NUM_SITES
    	string
    	default "5"
    
    comment "Download site #1 - default: http://freetz.3dfxatwork.de"
    
    config FREETZ_MOD_DL_SITE_1
    	string ""
    	default "http://freetz.3dfxatwork.de"
    	help
    		Download site #1 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
    		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
    		build process, all mirrors defined here are triggered on a random basis,
    		so as not to always use a certain mirror first. This is a cheap kind of
    		load balancing.
    
    		Note: We recommend you to only set #5 to a user-defined value, if
    		necessary. Necessary means that #1 - #4 are currently unavailable or
    		the desired package cannot be found on either of them. In addition to
    		the default servers #1 and #2, many packages have another server name
    		in their make file, so a user-defined mirror should rarely be necessary.
    
    comment "Download site #2 - default: http://freetz.wirsind.info"
    
    config FREETZ_MOD_DL_SITE_2
    	string ""
    	default "http://freetz.wirsind.info"
    	help
    		Download site #2 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
    		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
    		build process, all mirrors defined here are triggered on a random basis,
    		so as not to always use a certain mirror first. This is a cheap kind of
    		load balancing.
    
    		Note: We recommend you to only set #5 to a user-defined value, if
    		necessary. Necessary means that #1 - #4 are currently unavailable or
    		the desired package cannot be found on either of them. In addition to
    		the default servers #1 and #2, many packages have another server name
    		in their make file, so a user-defined mirror should rarely be necessary.
    
    comment "Download site #3 - default: http://freetz.magenbrot.net"
    
    config FREETZ_MOD_DL_SITE_3
    	string ""
    	default "http://freetz.magenbrot.net"
    	help
    		Download site #3 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
    		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
    		build process, all mirrors defined here are triggered on a random basis,
    		so as not to always use a certain mirror first. This is a cheap kind of
    		load balancing.
    
    		Note: We recommend you to only set #5 to a user-defined value, if
    		necessary. Necessary means that #1 - #4 are currently unavailable or
    		the desired package cannot be found on either of them. In addition to
    		the default servers #1 and #2, many packages have another server name
    		in their make file, so a user-defined mirror should rarely be necessary.
    
    comment "Download site #4 - default: empty (reserved for later use)"
    
    config FREETZ_MOD_DL_SITE_4
    	string ""
    	help
    		Download site #4 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
    		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
    		build process, all mirrors defined here are triggered on a random basis,
    		so as not to always use a certain mirror first. This is a cheap kind of
    		load balancing.
    
    		Note: We recommend you to only set #5 to a user-defined value, if
    		necessary. Necessary means that #1 - #4 are currently unavailable or
    		the desired package cannot be found on either of them. In addition to
    		the default servers #1 and #2, many packages have another server name
    		in their make file, so a user-defined mirror should rarely be necessary.
    
    comment "Download site #5 - user-defined"
    
    config FREETZ_MOD_DL_SITE_5
    	string ""
    	help
    		Download site #5 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
    		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
    		build process, all mirrors defined here are triggered on a random basis,
    		so as not to always use a certain mirror first. This is a cheap kind of
    		load balancing.
    
    		Note: We recommend you to only set #5 to a user-defined value, if
    		necessary. Necessary means that #1 - #4 are currently unavailable or
    		the desired package cannot be found on either of them. In addition to
    		the default servers #1 and #2, many packages have another server name
    		in their make file, so a user-defined mirror should rarely be necessary.
    
    endmenu
    
    config FREETZ_VERBOSITY_LEVEL
    	int "Verbosity level (0-2)"
    	default 2
    	help
    		Verbosity level of the fwmod script and tar.
    		0 is the least and 2 the most information.
    
    choice
    
    	prompt "Favicon"
    	default FREETZ_FAVICON_NONE
    	help
    		Adds small favicons to the document root.
    
    	config FREETZ_FAVICON_NONE
    		bool "none"
    
    	config FREETZ_FAVICON_DSL123
    		bool "dsl123's favicons"
    
    	config FREETZ_FAVICON_CUMA
    		bool "cuma's favicons"
    
    	config FREETZ_FAVICON_HANSOLO
    		bool "han-solo's favicons"
    endchoice
    
    config FREETZ_FAVICON_STRING
    	string
    	default "none"			if FREETZ_FAVICON_NONE
    	default "dsl123"		if FREETZ_FAVICON_DSL123
    	default "cuma"			if FREETZ_FAVICON_CUMA
    	default "hansolo"		if FREETZ_FAVICON_HANSOLO
    
    config FREETZ_SUBVERSION_STRING
    	bool "Add Freetz version to subversion string"
    	default y
    	help
    		Add Freetz version to subversion string, e.g. -11945-freetz-devel-2417.
    		Disable this if you have trouble with your isp or plugin downloads from
    		AVM don't work. 
    		
    		Please only disable this option if you really need to!
    
    config FREETZ_DEVELOPER_VERSION_STRING
    	bool "Developer version string"
    	depends on FREETZ_SUBVERSION_STRING
    	default y 
    	help
    		Add SVN (Subversion) repository revision number to firmware image name
    		and to /etc/.subversion, /etc/version within firmware itself.
    
    		The revision number string is generated by the client command line tool
    		svnversion and may include switch/modify flags and/or a range of
    		version numbers, depending on the current state of the working
    		directory at the time of generation. See 'svnversion --help' for
    		details.
    
    		ATTENTION! This option is for developers working on checked-out
    		versions of the Freetz source code only and requires svnversion to be
    		installed.
    
    menu External
    config EXTERNAL_ENABLED
    	bool "Enable external processing"
    	default n
    	help
    		Enable this to move (big) files out of the firmware-image onto
    		an attached USB device or a mounted network share like SMB or NFS.
    
    		-------------------------- WARNING ----------------------------------
    		Move all the files from build/modified/external to your choosen
    		directory on the box BEFORE you flash the reduced image!
    		
    		-------------------------- WARNING ----------------------------------
    		Do NOT external files needed to boot up Freetz!
    		
    		------------------------- ADVANCED ----------------------------------
    		You could external services (like Samba) too. First set the service
    		startup to "manual". Then enable the autorun/autoend feature of
    		Freetz and create these files in the root of your device:
    		[autorun.sh]
    		/etc/init.d/rc.XYZ start
    		[autoend.sh]
    		/etc/init.d/rc.XYZ stop
    
    config EXTERNAL_DOWNLOADER
    	bool "Prepare files for Downloader"
    	default n
    	depends on EXTERNAL_ENABLED && FREETZ_PACKAGE_DOWNLOADER
    	help
    		Prepare files for Downloader package. 
    		Downloader loads usualy files from a http or ftp server into the RAM of the box.
    
    config EXTERNAL_SUBDIRS
    	bool "Keep subdirectories"
    	default n if ! EXTERNAL_DOWNLOADER
    	default y if EXTERNAL_DOWNLOADER
    	depends on EXTERNAL_ENABLED
    	help
    		Keep the original directory structure
    
    config EXTERNAL_CREATEPAK
    	bool "Create file for upload" if ! EXTERNAL_DOWNLOADER
    	default y
    	depends on EXTERNAL_ENABLED && ! EXTERNAL_DOWNLOADER
    	help
    		Creates a file for upload with the webinterface
    
    choice
    
    	prompt "external directory"
    	default EXTERNAL_DIR1 if ! EXTERNAL_DOWNLOADER
    	default EXTERNAL_DIR3 if EXTERNAL_DOWNLOADER
    	depends on EXTERNAL_ENABLED
    	help
    		The directory on the Freetz Box with the externald files
    
    	config EXTERNAL_DIR1
    		depends on ! EXTERNAL_DOWNLOADER
    		bool "/var/media/ftp/uStor01/external/"
    
    	config EXTERNAL_DIR2
    		depends on ! EXTERNAL_DOWNLOADER
    		bool "/var/media/ftp/uStor02/external/"
    
    	config EXTERNAL_DIR3
    		depends on EXTERNAL_DOWNLOADER
    		bool "/mod/"
    
    	config EXTERNAL_CUSTOM_DIR
    		bool "custom directory"
    
    endchoice
    
    config EXTERNAL_CUSTOM_DIRNAME
    	string "custom directory" if EXTERNAL_CUSTOM_DIR
    	default "/var/media/ftp/uStor01/external/"
    	depends on EXTERNAL_ENABLED && EXTERNAL_CUSTOM_DIR
    	help
    		Custom directory on the Freetz Box with the externald files
    
    config EXTERNAL_DIRECTORY
    	string
    	default "/var/media/ftp/uStor01/external/" if EXTERNAL_DIR1
    	default "/var/media/ftp/uStor02/external/" if EXTERNAL_DIR2
    	default "/mod/" if EXTERNAL_DIR3
    	default EXTERNAL_CUSTOM_DIRNAME if EXTERNAL_CUSTOM_DIR
    	depends on EXTERNAL_ENABLED
    
    config EXTERNAL_OWN_FILES
    	string "own files"
    	default ""
    	depends on EXTERNAL_ENABLED && FREETZ_SHOW_ADVANCED
    	help
    		Put your own files/directorys here (space seperated)
    
    source make/external.in
    
    endmenu
    
    choice
    
    	prompt "SquashFS block size"
    	default FREETZ_SQUASHFS_BLOCKSIZE_65536
    
    	config FREETZ_SQUASHFS_BLOCKSIZE_ORIG
    		bool "original (usually 64 KB)"
    		help
    			Block size of the root filesystem. SquashFS 2.x can use block sizes
    			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
    			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
    			compression ratios than smaller ones.
    
    			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
    			anything smaller because your firmware image will grow unnecessarily.
    
    			Note: Currently anything above 128 KB will result in a kernel panic, thus
    			we do not allow it.
    
    	config FREETZ_SQUASHFS_BLOCKSIZE_16384
    		bool "16 KB"
    		help
    			Block size of the root filesystem. SquashFS 2.x can use block sizes
    			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
    			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
    			compression ratios than smaller ones.
    
    			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
    			anything smaller because your firmware image will grow unnecessarily.
    
    			Note: Currently anything above 128 KB will result in a kernel panic, thus
    			we do not allow it.
    
    	config FREETZ_SQUASHFS_BLOCKSIZE_32768
    		bool "32 KB"
    		help
    			Block size of the root filesystem. SquashFS 2.x can use block sizes
    			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
    			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
    			compression ratios than smaller ones.
    
    			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
    			anything smaller because your firmware image will grow unnecessarily.
    
    			Note: Currently anything above 128 KB will result in a kernel panic, thus
    			we do not allow it.
    
    	config FREETZ_SQUASHFS_BLOCKSIZE_65536
    		bool "64 KB"
    		help
    			Block size of the root filesystem. SquashFS 2.x can use block sizes
    			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
    			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
    			compression ratios than smaller ones.
    
    			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
    			anything smaller because your firmware image will grow unnecessarily.
    
    			Note: Currently anything above 128 KB will result in a kernel panic, thus
    			we do not allow it.
    
    	config FREETZ_SQUASHFS_BLOCKSIZE_131072
    		bool "128 KB (EXPERIMENTAL)"
    		depends on FREETZ_REPLACE_KERNEL
    		help
    			Block size of the root filesystem. SquashFS 2.x can use block sizes
    			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
    			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
    			compression ratios than smaller ones.
    
    			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
    			anything smaller because your firmware image will grow unnecessarily.
    
    			Note: Currently anything above 128 KB will result in a kernel panic, thus
    			we do not allow it.
    
    #	config FREETZ_SQUASHFS_BLOCKSIZE_262144
    #		bool "256 KB"
    #		depends on FREETZ_REPLACE_KERNEL
    
    #	config FREETZ_SQUASHFS_BLOCKSIZE_524288
    #		bool "512 KB"
    #		depends on FREETZ_REPLACE_KERNEL
    
    #	config FREETZ_SQUASHFS_BLOCKSIZE_1048576
    #		bool "1024 KB"
    #		depends on FREETZ_REPLACE_KERNEL
    
    endchoice
    
    menu "BusyBox options"
    	depends on FREETZ_REPLACE_BUSYBOX
    	source make/busybox/Config.in
    endmenu
    
    menu "Kernel modules"
    	source kernel/Config.in
    endmenu
    
    menu "Shared libraries"
    	config FREETZ_STRIP_LIBRARIES
    		bool "Run mklibs on the built root filesystem"
    		default n
    		help
    			Recompiles all the shared libraries to only include the
    			symbols actually needed to run the binaries on the target.
    
    			EXPERIMENTAL FEATURE, USE AT OWN RISK!
    	comment "Libraries -------------------------------"
    
    	source make/libs/Config.in
    endmenu
    
    menu "Compiler options"
    
    choice
    	prompt "Toolchains"
    	default FREETZ_DOWNLOAD_TOOLCHAIN
    	help
    		Download Toolchain, build toolchain
    
    	config FREETZ_DOWNLOAD_TOOLCHAIN
    		bool "Download and use precompiled toolchain"
    
    	config FREETZ_BUILD_TOOLCHAIN
    		bool "Build toolchain (requires 4GB diskspace)"
    endchoice
    
    config FREETZ_TARGET_CROSS
    	string
    	default "mipsel-linux-uclibc-"
    
    config FREETZ_TARGET_MAKE_PATH
    	string
    	default "toolchain/target/bin"
    
    config FREETZ_TARGET_CFLAGS
    	string "Target compiler flags"
    	default "-Os -pipe -march=4kc -Wa,--trap"
    
    config FREETZ_JLEVEL
    	int "Number of jobs to run simultaneously"
    	default "2"
    	help
    		Number of jobs to run simultanesouly
    
    config FREETZ_KERNEL_CROSS
    	string
    	default "mipsel-unknown-linux-gnu-"
    
    config FREETZ_KERNEL_MAKE_PATH
    	string
    	default "toolchain/kernel/bin"
    
    config FREETZ_HOSTCC
    	string "Host compiler"
    	default "gcc"
    	help
    		Set host compiler (default: gcc). To speed up compiling host
    		binarys it can be reasonable to set "ccache gcc" instead of
    		only "gcc".
    		
    source toolchain/Config.in
    
    endmenu
    
    endmenu
    
    Auf das Freetz Webinf komme ich ohne Probleme drauf.......
     
  2. hermann72pb

    hermann72pb IPPF-Promi

    Registriert seit:
    6 Nov. 2005
    Beiträge:
    3,564
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    und wo ist deine .config? Warum schaut ihr nicht zunächst mal rein, was ihr hier postet?

    Ich tippe mal, dass du bei 1und1 bist und tr069-Probleme hast.

    MfG
     
  3. henfri

    henfri Mitglied

    Registriert seit:
    21 Sep. 2005
    Beiträge:
    419
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hallo,

    ich habe das gleiche Problem.
    Im Titel steht 'gelöst' aber sorry, ich sehe die Lösung nicht. Was muss ich machen?

    Gruß,
    Hendrik
     
  4. hermann72pb

    hermann72pb IPPF-Promi

    Registriert seit:
    6 Nov. 2005
    Beiträge:
    3,564
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Wir können nicht hell sehen, Hendrik. Poste bitte hier mehr Angaben (Box, .config, Provider, Branding) oder leg dir eine Signatur zu.

    MfG
     
  5. chriwi

    chriwi Mitglied

    Registriert seit:
    14 Nov. 2005
    Beiträge:
    705
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    IT-Ingenieur
    Ort:
    Stuttgart Deutschland
    #5 chriwi, 5 Juni 2009
    Zuletzt bearbeitet: 5 Juni 2009
    Ich habe schienbar ein ähnliches Problem:
    - habe eine FB7170
    - habe einen 1&1 Komplettanschluß und habe diesen irgendwann einmal mit Startercode eingerichtet
    - vorher lief mit ner ca. 6 Monatte alten Firmware mit nem entsprechenden freetz alles einwandfrei
    - jetzt habe ich mir einen neune Freetz-Trunk (29.04.70freetz-devel-3383) mit "remove assisant" gebaut und über AVM-Webinterface geflasht

    danach läuft allessuper inclusive Freetz-Webinterface nur bei http://fritz.box kommt ne leere seite "telnet fritz.box" geht aber. Remote-Access über https:// ist auch eingerichtet bringt aber auch ne leere Seite aber zuindest über Proxy kein Timeout.

    Woran kann das liegen?

    hier mal der Quelltext der bei der augenscheinlich leeren Seite hinterlegt ist (bin mir aber nicht sicher ob der von der Fritzbox oder nur vom Proxy kommt)
    Code:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>XXXXXXXXXX Proxy Service: Error</title>
    <style type="text/css">
    <!--
    body {
        margin-left: 2%;
        margin-right: 2%;
    }
    p {
        font-family: verdana, Arial, Helvetica, sans-serif;
        font-size: 12px;
        top: 0px;
        margin-top: 6px;
        margin-bottom: 6px;
    }
    td {
        font-family: verdana, Arial, Helvetica, sans-serif;
        font-size: 12px;
        top: 0px;
    }
    .code {
        font-family: courier;
        font-size: 12px;
        top: 0px;
    }
    h1 {
        font-family: verdana, Arial, Helvetica, sans-serif;
        font-size: 20px;
        margin-top: 24px;
        margin-bottom: 12px;
    }
    h2.error {
        font-family: verdana, Arial, H
    
    Sieht aber irgendwie unvollständig aus
    .
     
  6. hermann72pb

    hermann72pb IPPF-Promi

    Registriert seit:
    6 Nov. 2005
    Beiträge:
    3,564
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Und wo ist das Problem es mit dem Assistenten und mit tr069 zu bauen? Wie gesagt, bei 1und1-Branding (und Nutzung) ist es anzuraten beide Sachen nicht rauszupatchen.
    Wo ist deine .config? Wir haben die Glaskugel gerade nicht da.
    Hast du irgendwas SSL-enthaltenes auf der Box?

    MfG
     
  7. chriwi

    chriwi Mitglied

    Registriert seit:
    14 Nov. 2005
    Beiträge:
    705
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    IT-Ingenieur
    Ort:
    Stuttgart Deutschland
    tr069 habe ich ja nicht rausgepatcht und ohne den nutzlosen Assistenten rauszuschmeissen reicht der Platz auf der FB7170 nichtmal für DNSMASQ + Callmonitor, von IPV6, Dropbear oder MC ganz zu schweigen.
    Gibt es keine Lösung das auch bei 1&1 ohne den Assistenten zu machen?
    .
     
  8. colonia27

    colonia27 Guest

    Schau mal mit telnet/ssh mit ps ob der ctlmgr-Prozess läuft.
    Bei mir tut er das seltsamerweise derzeit nach einem Reboot auch nicht mehr mit aktuellem trunk -3385 auf der aktuellen AIO-Labor an meiner enbrandeten 7270.
    (Signatur ist nicht aktuell)
    Nach manueller Eingabe von ctlmgr in der Konsole tuts alles wieder bis zum reboot

    P.s. für alle die meine .config jetzt vermissen, die kann ich gerade nicht anhängen.
     
  9. chriwi

    chriwi Mitglied

    Registriert seit:
    14 Nov. 2005
    Beiträge:
    705
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    IT-Ingenieur
    Ort:
    Stuttgart Deutschland
    Danke colonia,

    der Prozeß lief definitiv nicht, wenn ich ihn von Hand starte beendet er sich nach kurzer Zeit wieder ohne jegliche message und auch mit -m wird kein Logfile angelegt, starte ich ihn dagegen im Fordergrund bekomme ich folgende Meldungen:
    Code:
    /var/mod/root # ctlmgr -f
    1 samba users written to /var/samba/private/smbpasswd
    
    *** 2009-06-06 10:11:36(1) [Segmentation fault] ctlmgr(3298) CRASHED at md5_block_data_order+0x48 (/usr/lib/libcrypto.so.0.9.8 at 000353cc) accessing _gp+0x29bd52e1 (/usr/share/ctlmgr/libtr069.so at 29c2dd81) ***
    Segmentation fault
    /var/mod/root #
    
     
  10. olistudent

    olistudent IPPF-Urgestein

    Registriert seit:
    19 Okt. 2004
    Beiträge:
    14,756
    Zustimmungen:
    1
    Punkte für Erfolge:
    0
    Beruf:
    Softwareentwickler
    Ort:
    Kaiserslautern
    Du darfst die Openssl-Libs nicht auswählen/ersetzen.

    MfG Oliver
     
  11. chriwi

    chriwi Mitglied

    Registriert seit:
    14 Nov. 2005
    Beiträge:
    705
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    IT-Ingenieur
    Ort:
    Stuttgart Deutschland
    Danke Olistudent,

    ich hatte die openssl libs zwar nicht mehr bewußt mit drin, sie waren auch in menuconfig nirgends mehr ausgewählt und ich habe vor dem letzten make ein dirclean gemacht nachdem ich früher mal openvpn und dropbaer mit ausgewählt hatte aber irgendwie müssen die wohl doch drin geblieben sein.
    Jetzt habe ich Freetz-trunk nochmal komplett gelöscht und neu ausgecheckt (habe jetzt eine 3385) und nun funktioniert auch das AVM-Webinterface.
    Keine Ahnung was da vorher falsch gelaufen ist.
    .
     
  12. hermann72pb

    hermann72pb IPPF-Promi

    Registriert seit:
    6 Nov. 2005
    Beiträge:
    3,564
    Zustimmungen:
    0
    Punkte für Erfolge:
    36
    Die libs werden nicht automatisch abgewählt, die muss man schon entweder manuell abwählen oder "make config-clean-deps" machen.
    Assistenten würde ich an deiner Stelle drin lassen. Hilfe könnte man rauspatchen. Damit gab es bisher keine Probleme. Vielleicht den ganzen MINI-Gedönst und Mediaserver. Das bringt wirklich viel Platz. Ansonsten kann man einige Sachen externalisieren. Das funktioniert hervorragend, wenn man nicht übertreibt.

    MfG
     
  13. colonia27

    colonia27 Guest

    #13 colonia27, 6 Juni 2009
    Zuletzt von einem Moderator bearbeitet: 6 Juni 2009
    So, hier dann auch meine .config wie in #8 versprochen.

    Wie ich das sehe, gehts doch hier um die libssl, oder?
    Wenn ja, brauch ich diese denn nicht für meine Pakete so wie ich sie lt. config habe?

    Das Problem, kein AVM-Web-IF, hatte ich bis jetzt nie und die Pakete sind auch eigentlich immer die selben geblieben. Also ovpn, vsftpd, firewall, transmission und div. Kleinigkeiten.

    [EDIT] anscheinend liegt es zumindest bei mir nich an irgend nem ssl-Kram. Hier ist ebenfalls ein Thread, der (zumindest) mein Problem genauer trifft.
     

    Anhänge:

  14. sf3978

    sf3978 IPPF-Promi

    Registriert seit:
    2 Dez. 2007
    Beiträge:
    7,613
    Zustimmungen:
    3
    Punkte für Erfolge:
    38
    Evtl. wird hier die libcrypto benötigt: