Gelegentliche Fax-Abbrüche / Diva 4BRI-8 korrekt eingerichtet?

Ralph* · 22 Aug 2008

Bei manchen Faxübertragungen (Fax-Server an NT-Port der Karte, siehe Signatur) kommt es noch immer zu Abbrüchen.

Nachdem ich meine 3 x BRI-2M durch eine Diva 4BRI-8 2.0 ersetzt habe, dachte ich eigentlich, dass ich das Timingproblem nun los bin. Bin ich aber nicht. Oder der Fehler liegt doch an einer anderen Stelle.

Um sicherzugehen, dass ich die 4-Port Karte korrekt installiert habe, wäre es schön, wenn jemand einen Blick auf die 4 Logs werfen könnte.

Mich wundert, dass die Ports 2 - 4 keine Einträge für die DSPs haben. Ist das etwas schief gelaufen?

diva1.log (TE-Mode am NTBA des Anlagenanschlusses):

Code:

INITIAL XLOG:  CARD:1, Dialogic Diva 4BRI-8 PCI v2 SN:0815 - PORT 1, STARTED AT: Tue Aug 19 18:33:56 CEST 2008
Package Build: 3.0.10-107.884-1

    0:0000:044 - Instance(0)=0x802ea000 image_start=0x80000000, shared_memory=0xa0001000 card=53
    0:0000:000 - Diva Server 4BRI-8M 2.0 (2620)
    0:0000:000 - Protocol: 'TE_DMLT, Build 107-234, Protocol 6.03 104-905 [F#00FF]'
    0:0000:000 - DSP task 6: DIVA Server BRI 2M Kernel Version 1.00 Build 107-708
    0:0000:000 - DSP task 15: DIVA Server BRI 2M SoftIP Kernel Version 1.00 Build 107-708
    0:0000:000 - DSP task 100: HSCX Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 104: HSCXBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 107: HSCX Small Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 110: PIAFSD Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 200: V.110 Kernel Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 201: V.110 Overlay (600) Version 1.00 Build 107-708
    0:0000:001 - DSP task 202: V.110 Overlay (1200) Version 1.00 Build 107-708
    0:0000:001 - DSP task 203: V.110 Overlay (1200/75) Version 1.00 Build 107-708
    0:0000:001 - DSP task 204: V.110 Overlay (75/1200) Version 1.00 Build 107-708
    0:0000:001 - DSP task 205: V.110 Overlay (2400) Version 1.00 Build 107-708
    0:0000:001 - DSP task 206: V.110 Overlay (4800,9600,19200,38400) Version 1.00 Build 107-708
    0:0000:001 - DSP task 207: V.110 Overlay (7200,14400,28800) Version 1.00 Build 107-708
    0:0000:001 - DSP task 208: V.110 Overlay (12000,24000) Version 1.00 Build 107-708
    0:0000:001 - DSP task 209: V.110 Overlay (48000) Version 1.00 Build 107-708
    0:0000:001 - DSP task 210: V.110 Overlay (56000) Version 1.00 Build 107-708
    0:0000:001 - DSP task 504: VOICEBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 510: DTMF Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 512: DTMFBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 520: SIG Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 532: TONEBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 542: MEASBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 552: LECBR Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 590: Conferencing Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 600: TIKRNL81.F34 Task Version 1.00 Build 107-708
    0:0000:001 - DSP task 624: SIG Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 604: FSK OWN Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 607: V8.F34 Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 608: INFO Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 609: V.34 Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 622: INFOH.F34 Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 623: HV34.F34 Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 610: DIAL/FSK/FAX.F34 Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 611: DIAL.F34 Partial Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 612: FSKFAX.F34 Partial Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 613: FAX.F34 Partial Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 614: V.22/V.32 LEC Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 615: V.32 Partial Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 618: V.90 DPCM Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 619: V.90 APCM Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 625: V.22FC Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 629: V.22bis FC Overlay Version 1.00 Build 107-708
    0:0000:001 - DSP task 627: V.29FC Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 620: V.18 OWN-LK Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 621: V.OWN Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 702: VKRNLBR.SEC Task Version 1.00 Build 107-708
    0:0000:002 - DSP task 709: VKRNL Small Task Version 1.00 Build 107-708
    0:0000:002 - DSP task 703: G.711 Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 704: RTP G.711/G.726 Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 706: RTP GSM Overlay Version 1.00 Build 107-708
    0:0000:002 - DSP task 711: RTP G.729AB Overlay Version 1.00 Build 107-708
    0:0000:002 - Conf: DLI21st=1,MWIREG=1,ECTA=1,ECTF=1
    0:0000:002 - Conf: S2=1,Tei=1,NT2=1,Perm=0,WDog=0,LowCh=0,L1Hunt=0x0
    0:0000:002 - Conf: Loop=0,DidLen=0,Law=0,nosig=0,AlertTO=0xffff,PDisc=0
    0:0000:002 - Conf: Prot=1,PVer=0,NT=0,Lim=0,RTone=0,L2_Links=1
    0:0000:002 - Conf: XConn=0/2,ClkM=1/128/4096,ClkP=0000/0/0
    0:0000:002 - SN:0815-0 1 0
    0:0000:003 - Initialize Softmodem!!
    0:0000:003 - sysCreateDpc: handler=0x8011bbfc, context=0x804be95c
    0:0000:003 - sdp_dpc_init: check dpc 0 0x802ef350
    0:0000:003 - sdp_dpc_init: assign dpc 0 0x802ef350
    0:0000:004 - sysCreateDpc: handler=0x8011bbfc, context=0x804c1c8c
    0:0000:004 - sdp_dpc_init: check dpc 0 0x802ef350
    0:0000:004 - sdp_dpc_init: check dpc 1 0x802ef35c
    0:0000:004 - sdp_dpc_init: assign dpc 1 0x802ef35c
    0:0000:004 - ddal_load_time_init: link instance 0 to ddal
    0:0000:004 - task 0: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:004 - ddal_load_time_init: link instance 1 to ddal
    0:0000:004 - task 1: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:004 - ddal_load_time_init: sdp module 0 not present!
    0:0000:004 - ddal_load_time_init: sdp module 1 not present!
    0:0000:004 - Initialized 0 instances:
    0:0000:007 - init_bulk_buffers 4 65536 8192 2
    0:0000:009 - [0] Starting kernel...
    0:0000:011 - [0] DSP OK
    0:0000:011 - [1] Starting kernel...
    0:0000:013 - [1] DSP OK
    0:0000:013 - Initialize IPACX in TE mode
    0:0000:013 - Hardware Initialisation done.
    0:0000:016 - PSI: init
    0:0000:016 - PSI:set etsi interface
    0:0000:016 - CREATEID ok: context:0 assigned Id:1 freeIds=f0
    0:0000:016 - manufacturer features: 0xaf307f94
    0:0000:016 - D2Assign  -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:016 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:016 - D2Assign 0 d_id=01
    0:0000:016 - MDL: init
    0:0000:016 - MDL: init 0x8044390c to entry 0
    0:0000:017 - PCI DMA test: write 32 bytes system(0xa02f09dc) -> pci(0xceb3000)
    0:0000:026 - PCI DMA test: read 32 bytes pci(0xceb3000) -> system(0xa02f09fc)
    0:0000:026 - PCI DMA test OK
    0:0000:026 - PCI DMA write transfer 163840 bytes in 9 mSec
    0:0000:033 - PCI DMA read transfer 163840 bytes in 7 mSec
    0:0000:282 - L1_UP
    0:0000:334 - CREATEID ok: context:ff assigned Id:2 freeIds=ef
    0:0000:354 - DELETEID ok: deleted Id:2 freeIds=ef

diva2.log (TE-Mode am NTBA des Anlagenanschlusses):

Code:

INITIAL XLOG:  CARD:2, Dialogic Diva 4BRI-8 PCI v2 SN:0815 - PORT 2, STARTED AT: Tue Aug 19 18:33:56 CEST 2008
Package Build: 3.0.10-107.884-1

    0:0000:044 - Instance(1)=0x802eaea0 image_start=0x80011000, shared_memory=0xa0012000 card=53
    0:0000:033 - Diva Server 4BRI-8M 2.0 (2620)
    0:0000:033 - Protocol: 'TE_DMLT, Build 107-234, Protocol 6.03 104-905 [F#00FF]'
    0:0000:033 - Conf: DLI21st=1,MWIREG=1,ECTA=1,ECTF=1
    0:0000:033 - Conf: S2=1,Tei=1,NT2=1,Perm=0,WDog=0,LowCh=0,L1Hunt=0x0
    0:0000:033 - Conf: Loop=0,DidLen=0,Law=0,nosig=0,AlertTO=0xffff,PDisc=0
    0:0000:033 - Conf: Prot=1,PVer=0,NT=0,Lim=0,RTone=0,L2_Links=1
    0:0000:033 - Conf: XConn=0/2,ClkM=1/192/4096,ClkP=0000/0/0
    0:0000:033 - SN:0815-1 1 0
    0:0000:034 - Initialize Softmodem!!
    0:0000:034 - sysCreateDpc: handler=0x8011bbfc, context=0x804c4fbc
    0:0000:034 - sdp_dpc_init: check dpc 0 0x802ef3b8
    0:0000:035 - sdp_dpc_init: assign dpc 0 0x802ef3b8
    0:0000:035 - sysCreateDpc: handler=0x8011bbfc, context=0x804c82ec
    0:0000:035 - sdp_dpc_init: check dpc 0 0x802ef3b8
    0:0000:035 - sdp_dpc_init: check dpc 1 0x802ef3c4
    0:0000:035 - sdp_dpc_init: assign dpc 1 0x802ef3c4
    0:0000:035 - ddal_load_time_init: link instance 0 to ddal
    0:0000:035 - task 0: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:035 - ddal_load_time_init: link instance 1 to ddal
    0:0000:035 - task 1: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:035 - ddal_load_time_init: sdp module 0 not present!
    0:0000:035 - ddal_load_time_init: sdp module 1 not present!
    0:0000:035 - Initialized 0 instances:
    0:0000:038 - init_bulk_buffers 4 65536 8192 2
    0:0000:040 - [0] Starting kernel...
    0:0000:042 - [0] DSP OK
    0:0000:042 - [1] Starting kernel...
    0:0000:044 - [1] DSP OK
    0:0000:044 - Initialize IPACX in TE mode
    0:0000:044 - Hardware Initialisation done.
    0:0000:047 - PSI: init
    0:0000:047 - PSI:set etsi interface
    0:0000:047 - CREATEID ok: context:0 assigned Id:1 freeIds=f0
    0:0000:047 - manufacturer features: 0xaf307f94
    0:0000:047 - D2Assign  -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:047 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:047 - D2Assign 0 d_id=01
    0:0000:047 - MDL: init
    0:0000:047 - MDL: init 0x80448590 to entry 0
    0:0000:282 - L1_UP
    0:0000:363 - CREATEID ok: context:ff assigned Id:2 freeIds=ef
    0:0000:374 - DELETEID ok: deleted Id:2 freeIds=ef

diva3.log (derzeit unbenutzt):

Code:

INITIAL XLOG:  CARD:3, Dialogic Diva 4BRI-8 PCI v2 SN:0815 - PORT 3, STARTED AT: Tue Aug 19 18:33:56 CEST 2008
Package Build: 3.0.10-107.884-1

    0:0000:044 - Instance(2)=0x802ebd40 image_start=0x80022000, shared_memory=0xa0023000 card=53
    0:0000:048 - Diva Server 4BRI-8M 2.0 (2620)
    0:0000:048 - Protocol: 'TE_DMLT, Build 107-234, Protocol 6.03 104-905 [F#00FF]'
    0:0000:048 - Conf: DLI21st=1,MWIREG=1,ECTA=1,ECTF=1
    0:0000:048 - Conf: S2=1,Tei=1,NT2=1,Perm=0,WDog=0,LowCh=0,L1Hunt=0x0
    0:0000:048 - Conf: Loop=0,DidLen=0,Law=0,nosig=0,AlertTO=0xffff,PDisc=0
    0:0000:048 - Conf: Prot=1,PVer=0,NT=0,Lim=0,RTone=0,L2_Links=1
    0:0000:048 - Conf: XConn=0/2,ClkM=1/256/4096,ClkP=0000/0/0
    0:0000:048 - SN:0815-2 1 0
    0:0000:049 - Initialize Softmodem!!
    0:0000:049 - sysCreateDpc: handler=0x8011bbfc, context=0x804cb61c
    0:0000:049 - sdp_dpc_init: check dpc 0 0x802ef410
    0:0000:049 - sdp_dpc_init: assign dpc 0 0x802ef410
    0:0000:049 - sysCreateDpc: handler=0x8011bbfc, context=0x804ce94c
    0:0000:049 - sdp_dpc_init: check dpc 0 0x802ef410
    0:0000:049 - sdp_dpc_init: check dpc 1 0x802ef41c
    0:0000:049 - sdp_dpc_init: assign dpc 1 0x802ef41c
    0:0000:049 - ddal_load_time_init: link instance 0 to ddal
    0:0000:049 - task 0: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:050 - ddal_load_time_init: link instance 1 to ddal
    0:0000:050 - task 1: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:050 - ddal_load_time_init: sdp module 0 not present!
    0:0000:050 - ddal_load_time_init: sdp module 1 not present!
    0:0000:050 - Initialized 0 instances:
    0:0000:053 - init_bulk_buffers 4 65536 8192 2
    0:0000:055 - [0] Starting kernel...
    0:0000:057 - [0] DSP OK
    0:0000:057 - [1] Starting kernel...
    0:0000:059 - [1] DSP OK
    0:0000:059 - Initialize IPACX in TE mode
    0:0000:059 - Hardware Initialisation done.
    0:0000:061 - PSI: init
    0:0000:062 - PSI:set etsi interface
    0:0000:062 - CREATEID ok: context:0 assigned Id:1 freeIds=f0
    0:0000:062 - manufacturer features: 0xaf307f94
    0:0000:062 - D2Assign  -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:062 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:062 - D2Assign 0 d_id=01
    0:0000:062 - MDL: init
    0:0000:062 - MDL: init 0x8044d214 to entry 0
    0:0000:391 - CREATEID ok: context:ff assigned Id:2 freeIds=ef
    0:0000:402 - DELETEID ok: deleted Id:2 freeIds=ef

diva4.log (NT-Mode, verbunden mit dem Fax-Server):

Code:

INITIAL XLOG:  CARD:4, Dialogic Diva 4BRI-8 PCI v2 SN:0815 - PORT 4, STARTED AT: Tue Aug 19 18:33:56 CEST 2008
Package Build: 3.0.10-107.884-1

    0:0000:044 - Instance(3)=0x802ecbe0 image_start=0x80033000, shared_memory=0xa0034000 card=53
    0:0000:063 - Diva Server 4BRI-8M 2.0 (2620)
    0:0000:063 - Protocol: 'TE_DMLT, Build 107-234, Protocol 6.03 104-905 [F#00FF]'
    0:0000:063 - Conf: DLI21st=1,MWIREG=1,ECTA=1,ECTF=1
    0:0000:063 - Conf: S2=1,Tei=0,NT2=1,Perm=0,WDog=0,LowCh=0,L1Hunt=0x0
    0:0000:063 - Conf: Loop=0,DidLen=3,Law=0,nosig=0,AlertTO=0xffff,PDisc=0
    0:0000:063 - Conf: Prot=1,PVer=0,NT=1,Lim=0,RTone=0,L2_Links=8
    0:0000:063 - Conf: XConn=0/2,ClkM=1/320/4096,ClkP=0000/0/0
    0:0000:063 - SN:0815-3 1 0
    0:0000:064 - Initialize Softmodem!!
    0:0000:064 - sysCreateDpc: handler=0x8011bbfc, context=0x804d1c7c
    0:0000:064 - sdp_dpc_init: check dpc 0 0x802ef468
    0:0000:064 - sdp_dpc_init: assign dpc 0 0x802ef468
    0:0000:064 - sysCreateDpc: handler=0x8011bbfc, context=0x804d4fac
    0:0000:064 - sdp_dpc_init: check dpc 0 0x802ef468
    0:0000:064 - sdp_dpc_init: check dpc 1 0x802ef474
    0:0000:064 - sdp_dpc_init: assign dpc 1 0x802ef474
    0:0000:064 - ddal_load_time_init: link instance 0 to ddal
    0:0000:064 - task 0: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:064 - ddal_load_time_init: link instance 1 to ddal
    0:0000:064 - task 1: sdp module not present! (own_gp=0x0, sdp_gp=0x0)
    0:0000:064 - ddal_load_time_init: sdp module 0 not present!
    0:0000:064 - ddal_load_time_init: sdp module 1 not present!
    0:0000:064 - Initialized 0 instances:
    0:0000:068 - init_bulk_buffers 4 65536 8192 2
    0:0000:070 - [0] Starting kernel...
    0:0000:072 - [0] DSP OK
    0:0000:072 - [1] Starting kernel...
    0:0000:073 - [1] DSP OK
    0:0000:074 - Initialize IPACX in NT mode
    0:0000:074 - Hardware Initialisation done.
    0:0000:076 - PSI: init
    0:0000:076 - PSI:set etsi interface
    0:0000:077 - CREATEID ok: context:0 assigned Id:1 freeIds=f0
    0:0000:077 - manufacturer features: 0xaf307f94
    0:0000:077 - D2Assign  -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign 0 d_id=01
    0:0000:077 - MDL: init
    0:0000:077 - MDL: init 0x80451e98 to entry 0
    0:0000:077 - D2Assign  01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign 1 d_id=01
    0:0000:077 - MDL: init 0x80452194 to entry 1
    0:0000:077 - D2Assign  01 01 -- -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign 2 d_id=01
    0:0000:077 - MDL: init 0x80452490 to entry 2
    0:0000:077 - D2Assign  01 01 01 -- -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:077 - D2Assign 3 d_id=01
    0:0000:077 - MDL: init 0x8045278c to entry 3
    0:0000:077 - D2Assign  01 01 01 01 -- -- -- -- -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign 4 d_id=01
    0:0000:078 - MDL: init 0x80452a88 to entry 4
    0:0000:078 - D2Assign  01 01 01 01 01 -- -- -- -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign 5 d_id=01
    0:0000:078 - MDL: init 0x80452d84 to entry 5
    0:0000:078 - D2Assign  01 01 01 01 01 01 -- -- -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign 6 d_id=01
    0:0000:078 - MDL: init 0x80453080 to entry 6
    0:0000:078 - D2Assign  01 01 01 01 01 01 01 -- -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign  -- -- -- -- -- -- -- --
    0:0000:078 - D2Assign 7 d_id=01
    0:0000:078 - MDL: init 0x8045337c to entry 7
    0:0000:187 - D-R(008) FC FF 03 0F 00 00 07 E1
    0:0000:281 - L1_UP
    0:0000:419 - CREATEID ok: context:ff assigned Id:2 freeIds=ef
    0:0000:430 - DELETEID ok: deleted Id:2 freeIds=ef

Danke für Eure Hilfe!
Ralph

armincm · 23 Aug 2008

Ich kann kein Problem/Fehler entdecken. Bist du sicher, dass Line-Interconnect auch aktiviert wird (das sieht man im capi log)?

Armin

Ralph* · 23 Aug 2008

Hallo Armin,

ich war nur irritiert, dass bei den Ports 2-4 keine Einträge DSP task ... vorhanden sind - aber wenn Du sagst, dass das in Ordnung ist, dann ist das so ;-)

Da ich derzeit nicht im Büro bin, muss ich Log-Ausgabe nachreichen. Ich bin mir allerdings sicher, dass der Line-Interconnect aktiviert wird.

Laut Dialogic soll die aktuelle Firmware die Angabe einer ClockSource ermöglichen. Dürfte ich Dich daher ganz behutsam um eine Aktualisierung des v3 bitten? Andererseits funktioniert dieses Setup bei anderen (und ich glaube auch bei Dir) schließlich auch mit dem derzeit aktuellen v3 (3.0.10).

Bin etwas ratlos...

Ralph

Ralph* · 25 Aug 2008

Hier ist nun ein CLI-Mitschnitt einer (geglückten) Faxübertragung von 966 an 5555555 - die führende Null ist für die "Amtsholung".

Der Line Interconnect wird nur für den NT-Port aktiviert, ist das normal?

Code:

  == ISDN_NT#02: Incoming call '966' -> '05555555'
    -- ISDN_NT#02: Updated channel name: CAPI/ISDN_NT#02/05555555-209
    -- Executing Dial("CAPI/ISDN_NT#02/05555555-209", "CAPI/g1/966:5555555") in new stack
    -- Called g1/966:5555555
    -- CAPI/ISDN_TE2#02/5555555-20a is making progress passing it to CAPI/ISDN_NT#02/05555555-209
    -- CAPI/ISDN_TE2#02/5555555-20a is ringing
  == ISDN_NT#02: Setting up echo canceller (PLCI=0x104, function=1, options=4, tail=0)
  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x104, flag=1)
    -- ISDN_NT#02: Echo canceller successfully set up (PLCI=0x104)
  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
    -- CAPI/ISDN_TE2#02/5555555-20a answered CAPI/ISDN_NT#02/05555555-209
  == ISDN_NT#02: Answering for 05555555
    -- Attempting native bridge of CAPI/ISDN_NT#02/05555555-209 and CAPI/ISDN_TE2#02/5555555-20a
  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x104, flag=0)
  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=0)
  == ISDN_NT#02: Setting up echo canceller (PLCI=0x104, function=2, options=4, tail=0)
  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=2, options=4, tail=0)
    -- ISDN_NT#02: Echo canceller successfully disabled (PLCI=0x104)
    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
    -- ISDN_TE2#02: Echo canceller successfully disabled (PLCI=0x102)
    [B]-- ISDN_NT#02: Line Interconnect activated[/B]
  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
  == ISDN_TE2#02: CAPI Hangingup for PLCI=0x102 in state 2
  == Spawn extension (from-ntcapi, 05555555, 1) exited non-zero on 'CAPI/ISDN_NT#02/05555555-209'
  == ISDN_NT#02: CAPI Hangingup for PLCI=0x104 in state 2
       > ISDN_NT#02: CAPI INFO 0x3490: Normal call clearing
    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
       > ISDN_TE2#02: CAPI INFO 0x3490: Normal call clearing

Relevanter Teil der extensions.conf:

Code:

[from-ntcapi]
exten => _0.,1,Dial(CAPI/g1/${CALLERID(num)}:${EXTEN:1})
exten => _0.,2,Hangup()

komplette capi.conf (der Port 3 wird nicht verwendet):

Code:

;
; CAPI config
;

[general]
nationalprefix=0
internationalprefix=00
rxgain=1.0
txgain=1.0
language=de

[ISDN_TE1]
ntmode=no
isdnmode=did
incomingmsn=*
controller=1
group=1
;prefix=0
softdtmf=off
relaxdtmf=off
accountcode=
context=from-capi
holdtype=local
immediate=no
echocancel=yes
echocancelold=no
devices=2
;echotail=64
;defaultcid=123
language=de
bridge=yes
;callgroup=1

[ISDN_TE2]
ntmode=no
isdnmode=did
incomingmsn=*
controller=2
group=1
;prefix=0
softdtmf=off
relaxdtmf=off
accountcode=
context=from-capi
holdtype=local
immediate=no
echocancel=yes
echocancelold=no
devices=2
;echotail=64
;defaultcid=123
language=de
bridge=yes
;callgroup=1

;[ISDN_TE3]
;ntmode=no
;isdnmode=did
;incomingmsn=*
;controller=3
;group=1
;prefix=0
;softdtmf=off
;relaxdtmf=off
;accountcode=
;context=from-capi
;holdtype=local
;immediate=no
;echocancel=yes
;echocancelold=no
;devices=2
;echotail=64
;defaultcid=123
;language=de
;bridge=yes
;callgroup=1

[ISDN_NT]
ntmode=yes
isdnmode=did
incomingmsn=*
;controller=3
controller=4
group=2
;prefix=0
softdtmf=off
relaxdtmf=off
accountcode=
context=from-ntcapi
holdtype=local
immediate=no
echocancel=yes
echocancelold=no
devices=2
;echotail=64
;defaultcid=123
language=de
bridge=yes
;callgroup=1

armincm · 26 Aug 2008

Die Line-Interconnect-activated Meldung kommt nur einmal für einen der Ports, da es auch nur ein Befehl ist. Das ist normal.
Aber ein log mit
set verbose 5
capi debug
wäre schon besser, da mann hier die CAPI response codes besser verifizieren kann.
Hast Du mal versucht über Config den Sync-Mode umzustellen?

Armin

Ralph* · 26 Aug 2008

Armin,

ich bekomme beim v3 die Option für den Sync-Mode gar nicht angezeigt. Aber ich habe von Hand in der divas_cfg.rc die (wie ich hoffe relevanten) Zeilen geändert und den Rechner danach neu gestartet.

Ich habe Dir hier mal den SHELL_CFG-Teil, die geänderten Zeilen habe ich fett markiert. Das ist natürlich ein gewisser Blindflug... gibt es diese Zeilen bei Dir auch?

Code:

# SHELL_CFG_START
CStartTTY="0"
CTTY_PIAFS="0"
CTTY_FAX="0"
CStartCAPI="1"
CStartDivaSIPcontrol="0"
CDivaSIPcontrol_bin="sipcontrol_aki"
CStartDivaSS7="0"
CStartDivaSoftIP="0"
CGlobalFaxClass2Options="3"
CGlobalFaxClass2OptionsSEP="0"
CGlobalFaxClass2OptionsV34Rate="0"
CGlobalFaxClass2OptionsHiRes="0"
CGlobalTTYATInit=""
CGlobalCapiGO="0"
CGlobalCallRateLimit="0"
CVerifyCardSerialNumber="1"
CLoadInDebugMode="0"
CForceDriverLoad="0"
CStartDivalogd="0"
CStartDivaSnmp="0"
CDebugTraceProfile="s"
CDebugTraceADAPTER="0x00"
CDebugTraceADAPTERLayer1="0"
CDebugTraceADAPTERRBS="0"
CDebugTraceADAPTERRTP="0"
CDebugTraceSoftIP="0x00"
CDebugTraceSIP="0x83"
CDebugTraceXDI="0x197"
CDebugTraceMTPX="0x197"
CDebugTraceCAPI="0x197"
CDebugTraceTTY="0x197"
CDebugTraceSS7_MTP3="0x7"
CDebugTraceSS7_ISUP="0x7"
CTraceDecodeAll="1"
CTraceDecodePPP="detect"
CTraceDecodeVSIG="0"
CTraceDecodeS[0]="0"
CTraceDecodeS[1]="0"
CTraceDecodeS[2]="0"
CTraceDecodeS[3]="0"
CTraceDecodeS[4]="0"
CTraceDecodeS[5]="0"
CTraceDecodeS[6]="0"
CTraceDecodeS[7]="0"
CTraceDecodeS[8]="0"
CTraceDecodeS[9]="0"
CTraceDecodeS[10]="0"
CTraceDecodeS[11]="0"
CTraceDecodeS[12]="0"
CTraceDecodeS[13]="0"
CTraceDecodeS[14]="0"
CTraceDecodeS[15]="0"
CTraceDecodeS[16]="0"
CTraceDecodeS[17]="0"
CTraceDecodeS[18]="0"
CTraceDecodeS[19]="0"
CTraceDecodeS[20]="0"
CTraceDecodeS[21]="0"
CTraceDecodeS[22]="0"
CTraceDecodeS[23]="0"
CTraceDecodeS[24]="0"
CTraceDecodeS[25]="0"
CTraceDecodeS[26]="0"
CTraceDecodeS[27]="0"
CTraceDecodeS[28]="0"
CTraceDecodeS[29]="0"
CTraceDecodeS[30]="0"
CTraceDecodeS[31]="0"
CTraceDecodeS[32]="0"
CTraceDecodeChannel="all"
CDivaMtpxMode="0"
CStartOnBoot="0"
CDivaTTYWaitCause="0"
CDivaTTYIgnoreNumberType="0"
CDivaTTYNoCarrier="0"
CGlobalPiafsRTF="15"
CMtpxOn="0"
CSDKLogFilename="/var/log/dssdk.log"
CSDKLogFormat="2"
CSDKLogLevel="1"
CSysLIFixPCIBus="0"
CSysRebootOnError="0"
CLoadMaintOn="0"
CStartCtransferOn="0"
CSysCAPIIrq="0"
CSysMSIIrq="1"
CCardSUBADAPTER[1]="1"
CCardVISUALNAME[1]="Dialogic Diva 4BRI-8 PCI v2"
CCardNAME[1]="53"
CCardSN[1]="0815"
CCardPORT[1]=" - PORT 1"
CCard_FROZEN[1]="0"
CCard_ANALOG[1]="0"
CCardPROT[1]="2"
CCardNT2[1]="1"
CCard_ResourceBoard[1]="0"
CCardDIDLEN[1]="0"
CCardSPECIAL[1]=""
CCardDidTimeout[1]="0"
CCardNT[1]="0"
[B]
CCard_SYNC_MODE[1]="0"
CCard_SYNC_PORT[1]="0"
CCard_SYNC_CAPABLE[1]="1"
[/B]
CCardBRI_LK[1]="0"
CCardCRC[1]="0"
CCardL2[1]="1"
CCardL2_CHANGED[1]="0"
CCardLAW[1]="0"
CCardFL[1]="0"
CCardFL_LEN[1]="1"
CCardSTEI[1]="0"
CCardNTEI[1]="0"
CCardP2P[1]="1"
CCardLTONE[1]="0"
CCardFAX_FINE[1]="0"
CCardFAX_ECM[1]="0"
CCardFAX_E64B[1]="0"
CCardFAX_C2D[1]="0"
CCardFAX_CT6[1]="0"
CCardFAX_DUC[1]="0"
CCardFAX_NPL[1]="0"
CCardFAX_HTL[1]="0"
CCardFAX_HHL[1]="0"
CCardFAX_HPI[1]="0"
CCardFAX_DFB[1]="0"
CCardFAX_SPEED[1]="0"
CCardMIN_FAX_SPEED[1]="0"
CCard_FAX_MAX_OVERHEAD[1]="0"
CCardRBS_RXTO[1]="10"
CCardRBS_GLARE[1]="1"
CCardRBS_BC[1]="0"
CCard_CAS_DEBUG_LEVEL[1]="3"
CCardDIAL_PAUSE_CHAR[1]=","
CCardDIAL_DONTWAITTONE_CHAR[1]="x"
CCardDIAL_WAITTONE_CHAR[1]="w"
CCardDIAL_FLASH_CHAR[1]="!"
CCardRBS_ANSWTO[1]="120"
CCardRBS_TRUNK[1]="0"
CCardRBS_OFFICE[1]="0"
CCardRBS_AS[1]="0"
CCardRBS_DIAL[1]="1"
CCardRBS_DODIAL[1]="0"
CCardAUTO_SPID_DISABLE[1]="0"
CCardALWAYS_RING_VOICE[1]="0"
CCardSPID1[1]=""
CCardSPID1MSN[1]=""
CCardSPID2[1]=""
CCardSPID2MSN[1]=""
CCardUS_EKTS_N_CACH_HANDLES[1]="0"
CCardUS_EKTS_BEGIN_CONF[1]="61"
CCardUS_EKTS_DROP_CONF[1]="63"
CCardUS_EKTS_CALL_TRANSFER[1]="62"
CCardUS_EKTS_MWI[1]="0"
CCardQSIG_DIALECT[1]="0"
CCardQSIG_PBX[1]="0"
CCardQSIG_CHI[1]="0"
CCardQSIG_CHFMT[1]="0"
CCardQSIG_REROUTING[1]="0"
CCardQSIG_CHARGE_DISABLED[1]="0"
CCardQSIG_CHARGE_INSETUP[1]="0"
CCardQSIG_CHARGE_NORATE[1]="0"
CCardQSIG_CHARGE_NOINTERIM[1]="0"
CCardQSIG_CHARGE_NOFINAL[1]="0"
CCardQSIG_PR_INVITE[1]="0"
CCardQSIG_NO_REROUTING[1]="0"
CCardQSIG_TRANSPARENT_FAC[1]="0"
CCardQSIG_TSC_CONN[1]="0"
CCardQSIG_TAKELASTRDN[1]="0"
CCardBRI_REV[1]="0"
CCardR2_CTRYLEN[1]="2"
CCardR2_NOCLI[1]="0"
CCard_MADAPTER[1]="101"
CCard_DISABLE_PART68[1]="0"
CCard_DISABLE_4BRIFPGA[1]="0"
CCard_ANIDNI_1_TYPE[1]="0x2a"
CCard_ANIDNI_2_TYPE[1]="0x2a"
CCard_ANIDNI_3_TYPE[1]="0x2a"
CCard_ANIDNI_1_ON[1]="0"
CCard_ANIDNI_2_ON[1]="0"
CCard_ANIDNI_3_ON[1]="0"
CCard_NODISCAFTERPROGRESS[1]="0"
CCard_ECT[1]="0"
CCard_DEFLECTION[1]="0"
CCard_LINKBALANCE[1]="0"
CCard_ETSI_MWI[1]="0"
CCard_ADDMISSINGRDN[1]="0"
CCard_TX_ATTENUATION[1]="0"
CCard_DTMF_SUPRESSION[1]="0"
CCard_REC_AGC[1]="0"
CCard_DTMF_COLLECT[1]=""
CCard_RBS_SILENCE_TIMEOUT[1]=""
CCard_POTS_DIRECTION[1]=""
CCard_POTS_CALIBRATION[1]=""
CCard_RINGSTILANSWER[1]=""
CCard_POTS_PBXPARAMS[1]=""
CCard_POTS_FLASHLEN[1]=""
CCard_POTS_CONSULT[1]=""
CCard_POTS_TRANSFER[1]=""
CCard_POTS_SWAPHOLD[1]=""
CCard_POTS_DISCACTIVCALL[1]=""
CCard_POTS_DISCPASSIVCALL[1]=""
CCard_POTS_RETRIEVE_MODE[1]=""
CCard_POTS_CALLBACKTIMER[1]=""
CCard_POTS_RETRIEVEHOOKOFFTIMER[1]=""
CCard_POTS_CONFIGCPN[1]=""
CCard_POTS_FLEXDTMF[1]=""
CCard_POTS_FLEXDIRINT[1]=""
CCard_POTS_FLEXDIREXT[1]=""
CCard_POTS_FLEXDIVINT[1]=""
CCard_POTS_FLEXDIVEXT[1]=""
CCard_POTS_FLEXDIRECT[1]=""
CCard_POTS_FLEXDIVERT[1]=""
CCard_DISABLED[1]="0"
CCard_CHAN[1]="2"
CCardSUBADAPTER[2]="2"
CCardVISUALNAME[2]="Dialogic Diva 4BRI-8 PCI v2"
CCardNAME[2]="53"
CCardSN[2]="0815"
CCardPORT[2]=" - PORT 2"
CCard_FROZEN[2]="0"
CCard_ANALOG[2]="0"
CCardPROT[2]="2"
CCardNT2[2]="1"
CCard_ResourceBoard[2]="0"
CCardDIDLEN[2]="0"
CCardSPECIAL[2]=""
CCardDidTimeout[2]="0"
CCardNT[2]="0"
[B]
CCard_SYNC_MODE[2]="0"
CCard_SYNC_PORT[2]="0"
CCard_SYNC_CAPABLE[2]="1"
[/B]
CCardBRI_LK[2]="0"
CCardCRC[2]="0"
CCardL2[2]="1"
CCardL2_CHANGED[2]="0"
CCardLAW[2]="0"
CCardFL[2]="0"
CCardFL_LEN[2]="1"
CCardSTEI[2]="0"
CCardNTEI[2]="0"
CCardP2P[2]="1"
CCardLTONE[2]="0"
CCardFAX_FINE[2]="0"
CCardFAX_ECM[2]="0"
CCardFAX_E64B[2]="0"
CCardFAX_C2D[2]="0"
CCardFAX_CT6[2]="0"
CCardFAX_DUC[2]="0"
CCardFAX_NPL[2]="0"
CCardFAX_HTL[2]="0"
CCardFAX_HHL[2]="0"
CCardFAX_HPI[2]="0"
CCardFAX_DFB[2]="0"
CCardFAX_SPEED[2]="0"
CCardMIN_FAX_SPEED[2]="0"
CCard_FAX_MAX_OVERHEAD[2]="0"
CCardRBS_RXTO[2]="10"
CCardRBS_GLARE[2]="1"
CCardRBS_BC[2]="0"
CCard_CAS_DEBUG_LEVEL[2]="3"
CCardDIAL_PAUSE_CHAR[2]=","
CCardDIAL_DONTWAITTONE_CHAR[2]="x"
CCardDIAL_WAITTONE_CHAR[2]="w"
CCardDIAL_FLASH_CHAR[2]="!"
CCardRBS_ANSWTO[2]="120"
CCardRBS_TRUNK[2]="0"
CCardRBS_OFFICE[2]="0"
CCardRBS_AS[2]="0"
CCardRBS_DIAL[2]="1"
CCardRBS_DODIAL[2]="0"
CCardAUTO_SPID_DISABLE[2]="0"
CCardALWAYS_RING_VOICE[2]="0"
CCardSPID1[2]=""
CCardSPID1MSN[2]=""
CCardSPID2[2]=""
CCardSPID2MSN[2]=""
CCardUS_EKTS_N_CACH_HANDLES[2]="0"
CCardUS_EKTS_BEGIN_CONF[2]="61"
CCardUS_EKTS_DROP_CONF[2]="63"
CCardUS_EKTS_CALL_TRANSFER[2]="62"
CCardUS_EKTS_MWI[2]="0"
CCardQSIG_DIALECT[2]="0"
CCardQSIG_PBX[2]="0"
CCardQSIG_CHI[2]="0"
CCardQSIG_CHFMT[2]="0"
CCardQSIG_REROUTING[2]="0"
CCardQSIG_CHARGE_DISABLED[2]="0"
CCardQSIG_CHARGE_INSETUP[2]="0"
CCardQSIG_CHARGE_NORATE[2]="0"
CCardQSIG_CHARGE_NOINTERIM[2]="0"
CCardQSIG_CHARGE_NOFINAL[2]="0"
CCardQSIG_PR_INVITE[2]="0"
CCardQSIG_NO_REROUTING[2]="0"
CCardQSIG_TRANSPARENT_FAC[2]="0"
CCardQSIG_TSC_CONN[2]="0"
CCardQSIG_TAKELASTRDN[2]="0"
CCardBRI_REV[2]="0"
CCardR2_CTRYLEN[2]="2"
CCardR2_NOCLI[2]="0"
CCard_MADAPTER[2]="102"
CCard_DISABLE_PART68[2]="0"
CCard_DISABLE_4BRIFPGA[2]="0"
CCard_ANIDNI_1_TYPE[2]="0x2a"
CCard_ANIDNI_2_TYPE[2]="0x2a"
CCard_ANIDNI_3_TYPE[2]="0x2a"
CCard_ANIDNI_1_ON[2]="0"
CCard_ANIDNI_2_ON[2]="0"
CCard_ANIDNI_3_ON[2]="0"
CCard_NODISCAFTERPROGRESS[2]="0"
CCard_ECT[2]="0"
CCard_DEFLECTION[2]="0"
CCard_LINKBALANCE[2]="0"
CCard_ETSI_MWI[2]="0"
CCard_ADDMISSINGRDN[2]="0"
CCard_TX_ATTENUATION[2]="0"
CCard_DTMF_SUPRESSION[2]="0"
CCard_REC_AGC[2]="0"
CCard_DTMF_COLLECT[2]=""
CCard_RBS_SILENCE_TIMEOUT[2]=""
CCard_POTS_DIRECTION[2]=""
CCard_POTS_CALIBRATION[2]=""
CCard_RINGSTILANSWER[2]=""
CCard_POTS_PBXPARAMS[2]=""
CCard_POTS_FLASHLEN[2]=""
CCard_POTS_CONSULT[2]=""
CCard_POTS_TRANSFER[2]=""
CCard_POTS_SWAPHOLD[2]=""
CCard_POTS_DISCACTIVCALL[2]=""
CCard_POTS_DISCPASSIVCALL[2]=""
CCard_POTS_RETRIEVE_MODE[2]=""
CCard_POTS_CALLBACKTIMER[2]=""
CCard_POTS_RETRIEVEHOOKOFFTIMER[2]=""
CCard_POTS_CONFIGCPN[2]=""
CCard_POTS_FLEXDTMF[2]=""
CCard_POTS_FLEXDIRINT[2]=""
CCard_POTS_FLEXDIREXT[2]=""
CCard_POTS_FLEXDIVINT[2]=""
CCard_POTS_FLEXDIVEXT[2]=""
CCard_POTS_FLEXDIRECT[2]=""
CCard_POTS_FLEXDIVERT[2]=""
CCard_DISABLED[2]="0"
CCard_CHAN[2]="2"
CCardSUBADAPTER[3]="3"
CCardVISUALNAME[3]="Dialogic Diva 4BRI-8 PCI v2"
CCardNAME[3]="53"
CCardSN[3]="0815"
CCardPORT[3]=" - PORT 3"
CCard_FROZEN[3]="0"
CCard_ANALOG[3]="0"
CCardPROT[3]="2"
CCardNT2[3]="1"
CCard_ResourceBoard[3]="0"
CCardDIDLEN[3]="0"
CCardSPECIAL[3]=""
CCardDidTimeout[3]="0"
CCardNT[3]="0"
[B]
CCard_SYNC_MODE[3]="0"
CCard_SYNC_PORT[3]="0"
CCard_SYNC_CAPABLE[3]="1"
[/B]
CCardBRI_LK[3]="0"
CCardCRC[3]="0"
CCardL2[3]="1"
CCardL2_CHANGED[3]="0"
CCardLAW[3]="0"
CCardFL[3]="0"
CCardFL_LEN[3]="1"
CCardSTEI[3]="0"
CCardNTEI[3]="0"
CCardP2P[3]="1"
CCardLTONE[3]="0"
CCardFAX_FINE[3]="0"
CCardFAX_ECM[3]="0"
CCardFAX_E64B[3]="0"
CCardFAX_C2D[3]="0"
CCardFAX_CT6[3]="0"
CCardFAX_DUC[3]="0"
CCardFAX_NPL[3]="0"
CCardFAX_HTL[3]="0"
CCardFAX_HHL[3]="0"
CCardFAX_HPI[3]="0"
CCardFAX_DFB[3]="0"
CCardFAX_SPEED[3]="0"
CCardMIN_FAX_SPEED[3]="0"
CCard_FAX_MAX_OVERHEAD[3]="0"
CCardRBS_RXTO[3]="10"
CCardRBS_GLARE[3]="1"
CCardRBS_BC[3]="0"
CCard_CAS_DEBUG_LEVEL[3]="3"
CCardDIAL_PAUSE_CHAR[3]=","
CCardDIAL_DONTWAITTONE_CHAR[3]="x"
CCardDIAL_WAITTONE_CHAR[3]="w"
CCardDIAL_FLASH_CHAR[3]="!"
CCardRBS_ANSWTO[3]="120"
CCardRBS_TRUNK[3]="0"
CCardRBS_OFFICE[3]="0"
CCardRBS_AS[3]="0"
CCardRBS_DIAL[3]="1"
CCardRBS_DODIAL[3]="0"
CCardAUTO_SPID_DISABLE[3]="0"
CCardALWAYS_RING_VOICE[3]="0"
CCardSPID1[3]=""
CCardSPID1MSN[3]=""
CCardSPID2[3]=""
CCardSPID2MSN[3]=""
CCardUS_EKTS_N_CACH_HANDLES[3]="0"
CCardUS_EKTS_BEGIN_CONF[3]="61"
CCardUS_EKTS_DROP_CONF[3]="63"
CCardUS_EKTS_CALL_TRANSFER[3]="62"
CCardUS_EKTS_MWI[3]="0"
CCardQSIG_DIALECT[3]="0"
CCardQSIG_PBX[3]="0"
CCardQSIG_CHI[3]="0"
CCardQSIG_CHFMT[3]="0"
CCardQSIG_REROUTING[3]="0"
CCardQSIG_CHARGE_DISABLED[3]="0"
CCardQSIG_CHARGE_INSETUP[3]="0"
CCardQSIG_CHARGE_NORATE[3]="0"
CCardQSIG_CHARGE_NOINTERIM[3]="0"
CCardQSIG_CHARGE_NOFINAL[3]="0"
CCardQSIG_PR_INVITE[3]="0"
CCardQSIG_NO_REROUTING[3]="0"
CCardQSIG_TRANSPARENT_FAC[3]="0"
CCardQSIG_TSC_CONN[3]="0"
CCardQSIG_TAKELASTRDN[3]="0"
CCardBRI_REV[3]="0"
CCardR2_CTRYLEN[3]="2"
CCardR2_NOCLI[3]="0"
CCard_MADAPTER[3]="103"
CCard_DISABLE_PART68[3]="0"
CCard_DISABLE_4BRIFPGA[3]="0"
CCard_ANIDNI_1_TYPE[3]="0x2a"
CCard_ANIDNI_2_TYPE[3]="0x2a"
CCard_ANIDNI_3_TYPE[3]="0x2a"
CCard_ANIDNI_1_ON[3]="0"
CCard_ANIDNI_2_ON[3]="0"
CCard_ANIDNI_3_ON[3]="0"
CCard_NODISCAFTERPROGRESS[3]="0"
CCard_ECT[3]="0"
CCard_DEFLECTION[3]="0"
CCard_LINKBALANCE[3]="0"
CCard_ETSI_MWI[3]="0"
CCard_ADDMISSINGRDN[3]="0"
CCard_TX_ATTENUATION[3]="0"
CCard_DTMF_SUPRESSION[3]="0"
CCard_REC_AGC[3]="0"
CCard_DTMF_COLLECT[3]=""
CCard_RBS_SILENCE_TIMEOUT[3]=""
CCard_POTS_DIRECTION[3]=""
CCard_POTS_CALIBRATION[3]=""
CCard_RINGSTILANSWER[3]=""
CCard_POTS_PBXPARAMS[3]=""
CCard_POTS_FLASHLEN[3]=""
CCard_POTS_CONSULT[3]=""
CCard_POTS_TRANSFER[3]=""
CCard_POTS_SWAPHOLD[3]=""
CCard_POTS_DISCACTIVCALL[3]=""
CCard_POTS_DISCPASSIVCALL[3]=""
CCard_POTS_RETRIEVE_MODE[3]=""
CCard_POTS_CALLBACKTIMER[3]=""
CCard_POTS_RETRIEVEHOOKOFFTIMER[3]=""
CCard_POTS_CONFIGCPN[3]=""
CCard_POTS_FLEXDTMF[3]=""
CCard_POTS_FLEXDIRINT[3]=""
CCard_POTS_FLEXDIREXT[3]=""
CCard_POTS_FLEXDIVINT[3]=""
CCard_POTS_FLEXDIVEXT[3]=""
CCard_POTS_FLEXDIRECT[3]=""
CCard_POTS_FLEXDIVERT[3]=""
CCard_DISABLED[3]="0"
CCard_CHAN[3]="2"
CCardSUBADAPTER[4]="4"
CCardVISUALNAME[4]="Dialogic Diva 4BRI-8 PCI v2"
CCardNAME[4]="53"
CCardSN[4]="0815"
CCardPORT[4]=" - PORT 4"
CCard_FROZEN[4]="0"
CCard_ANALOG[4]="0"
CCardPROT[4]="2"
CCardNT2[4]="1"
CCard_ResourceBoard[4]="0"
CCardDIDLEN[4]="3"
CCardSPECIAL[4]=""
CCardDidTimeout[4]="0"
CCardNT[4]="1"
[B]
CCard_SYNC_MODE[4]="1"
CCard_SYNC_PORT[4]="1"
CCard_SYNC_CAPABLE[4]="1"
[/B]
CCardBRI_LK[4]="0"
CCardCRC[4]="0"
CCardL2[4]="1"
CCardL2_CHANGED[4]="0"
CCardLAW[4]="0"
CCardFL[4]="0"
CCardFL_LEN[4]="1"
CCardSTEI[4]="0"
CCardNTEI[4]="0"
CCardP2P[4]="0"
CCardLTONE[4]="0"
CCardFAX_FINE[4]="0"
CCardFAX_ECM[4]="0"
CCardFAX_E64B[4]="0"
CCardFAX_C2D[4]="0"
CCardFAX_CT6[4]="0"
CCardFAX_DUC[4]="0"
CCardFAX_NPL[4]="0"
CCardFAX_HTL[4]="0"
CCardFAX_HHL[4]="0"
CCardFAX_HPI[4]="0"
CCardFAX_DFB[4]="0"
CCardFAX_SPEED[4]="0"
CCardMIN_FAX_SPEED[4]="0"
CCard_FAX_MAX_OVERHEAD[4]="0"
CCardRBS_RXTO[4]="15"
CCardRBS_GLARE[4]="0"
CCardRBS_BC[4]="0"
CCard_CAS_DEBUG_LEVEL[4]="3"
CCardDIAL_PAUSE_CHAR[4]=","
CCardDIAL_DONTWAITTONE_CHAR[4]="x"
CCardDIAL_WAITTONE_CHAR[4]="w"
CCardDIAL_FLASH_CHAR[4]="!"
CCardRBS_ANSWTO[4]="120"
CCardRBS_TRUNK[4]="0"
CCardRBS_OFFICE[4]="0"
CCardRBS_AS[4]="0"
CCardRBS_DIAL[4]="1"
CCardRBS_DODIAL[4]="0"
CCardAUTO_SPID_DISABLE[4]="0"
CCardALWAYS_RING_VOICE[4]="0"
CCardSPID1[4]=""
CCardSPID1MSN[4]=""
CCardSPID2[4]=""
CCardSPID2MSN[4]=""
CCardUS_EKTS_N_CACH_HANDLES[4]="0"
CCardUS_EKTS_BEGIN_CONF[4]="61"
CCardUS_EKTS_DROP_CONF[4]="63"
CCardUS_EKTS_CALL_TRANSFER[4]="62"
CCardUS_EKTS_MWI[4]="0"
CCardQSIG_DIALECT[4]="0"
CCardQSIG_PBX[4]="0"
CCardQSIG_CHI[4]="0"
CCardQSIG_CHFMT[4]="0"
CCardQSIG_REROUTING[4]="0"
CCardQSIG_CHARGE_DISABLED[4]="0"
CCardQSIG_CHARGE_INSETUP[4]="0"
CCardQSIG_CHARGE_NORATE[4]="0"
CCardQSIG_CHARGE_NOINTERIM[4]="0"
CCardQSIG_CHARGE_NOFINAL[4]="0"
CCardQSIG_PR_INVITE[4]="0"
CCardQSIG_NO_REROUTING[4]="0"
CCardQSIG_TRANSPARENT_FAC[4]="0"
CCardQSIG_TSC_CONN[4]="0"
CCardQSIG_TAKELASTRDN[4]="0"
CCardBRI_REV[4]="0"
CCardR2_CTRYLEN[4]="2"
CCardR2_NOCLI[4]="0"
CCard_MADAPTER[4]="104"
CCard_DISABLE_PART68[4]="0"
CCard_DISABLE_4BRIFPGA[4]="0"
CCard_ANIDNI_1_TYPE[4]="0x2a"
CCard_ANIDNI_2_TYPE[4]="0x2a"
CCard_ANIDNI_3_TYPE[4]="0x2a"
CCard_ANIDNI_1_ON[4]="0"
CCard_ANIDNI_2_ON[4]="0"
CCard_ANIDNI_3_ON[4]="0"
CCard_NODISCAFTERPROGRESS[4]="0"
CCard_ECT[4]="0"
CCard_DEFLECTION[4]="0"
CCard_LINKBALANCE[4]="0"
CCard_ETSI_MWI[4]="0"
CCard_ADDMISSINGRDN[4]="0"
CCard_TX_ATTENUATION[4]="0"
CCard_DTMF_SUPRESSION[4]="0"
CCard_REC_AGC[4]="0"
CCard_DTMF_COLLECT[4]=""
CCard_RBS_SILENCE_TIMEOUT[4]=""
CCard_POTS_DIRECTION[4]=""
CCard_POTS_CALIBRATION[4]=""
CCard_RINGSTILANSWER[4]=""
CCard_POTS_PBXPARAMS[4]=""
CCard_POTS_FLASHLEN[4]=""
CCard_POTS_CONSULT[4]=""
CCard_POTS_TRANSFER[4]=""
CCard_POTS_SWAPHOLD[4]=""
CCard_POTS_DISCACTIVCALL[4]=""
CCard_POTS_DISCPASSIVCALL[4]=""
CCard_POTS_RETRIEVE_MODE[4]=""
CCard_POTS_CALLBACKTIMER[4]=""
CCard_POTS_RETRIEVEHOOKOFFTIMER[4]=""
CCard_POTS_CONFIGCPN[4]=""
CCard_POTS_FLEXDTMF[4]=""
CCard_POTS_FLEXDIRINT[4]=""
CCard_POTS_FLEXDIREXT[4]=""
CCard_POTS_FLEXDIVINT[4]=""
CCard_POTS_FLEXDIVEXT[4]=""
CCard_POTS_FLEXDIRECT[4]=""
CCard_POTS_FLEXDIVERT[4]=""
CCard_DISABLED[4]="0"
CCard_CHAN[4]="2"
CCardSN[5]="-1"
CCardLAW[65]="0"
CCardNT2[65]="0"
CCardFAX_SPEED[65]="0"
CCardMIN_FAX_SPEED[65]="0"
CCard_FAX_MAX_OVERHEAD[65]="0"
CCardFAX_FINE[65]="0"
CCardFAX_ECM[65]="0"
CCardFAX_E64B[65]="0"
CCardFAX_C2D[65]="0"
CCardFAX_CT6[65]="0"
CCardFAX_DUC[65]="0"
CCardFAX_NPL[65]="0"
CCardFAX_HTL[65]="0"
CCardFAX_HHL[65]="0"
CCardFAX_HPI[65]="0"
CCardFAX_DFB[65]="0"
CCard_DISABLE_PART68[65]="0"
CCard_DTMF_SUPRESSION[65]="0"
CCard_REC_AGC[65]="0"
CCard_ADDMISSINGRDN[65]=""
CSOFTIP_FROM_DISPLAYNAME=""
CSOFTIP_FROM_ADDRESS=""
CSOFTIP_FROM_PORT=""
CSOFTIP_REGISTRAR_ADDRESS=""
CSOFTIP_REGISTRAR_PORT=""
CSOFTIP_PROXY_ADDRESS=""
CSOFTIP_PROXY_USERNAME=""
CSOFTIP_PROXY_PASSWD=""
CSOFTIP_MEDIA_PORT=""
CSOFTIP_MEDIA_TYPE=""
CSOFTIP_MEDIA_NUMPORTS=""
CSOFTIP_MEDIA_TRANSPORT=""
CSOFTIP_MEDIA_TRANSTYPE=""
CSOFTIP_MEDIA_CODEC=""
CSOFTIP_MEDIA_ATTRIBUTE1=""
CSOFTIP_MEDIA_ATTRIBUTE2=""
CSOFTIP_MEDIA_ATTRIBUTE3=""
CSOFTIP_MEDIA_ATTRIBUTE4=""
CSOFTIP_SDP_ORIGIN=""
CSOFTIP_SDP_URI=""
CSOFTIP_SDP_CONNECTION=""
CSOFTIP_SDP_INFORMATION=""
CSOFTIP_SDP_SESSION=""
CSOFTIP_ALLOW1=""
CSOFTIP_ALLOW2=""
CSOFTIP_ALLOW3=""
CSOFTIP_ALLOW4=""
CSOFTIP_RTP_START_PORT=""
CSOFTIP_RTP_END_PORT=""
CCardSN[65]="-1"
CMTPX_ECT[101]="0"
CMTPX_HI[101]="0"
CMTPX_ECT[102]="0"
CMTPX_HI[102]="0"
CMTPX_ECT[103]="0"
CMTPX_HI[103]="0"
CMTPX_ECT[104]="0"
CMTPX_HI[104]="0"
CResourceBoardChannels="0"
CConfigCSUM="401651620921452"
# SHELL_CFG_END

Hier ist ein Log einer geglückten Faxverbindung (2 Seiten):

Code:

CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x82 MsgNum=0x3ea0 NCCI=0x00000204
CONNECT_IND                ID=002 #0x3ea0 LEN=0046
  Controller/PLCI/NCCI            = 0x204
  CIPValue                        = 0x4
  CalledPartyNumber               = <81>05555555
  CallingPartyNumber              = <01 80>966
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <90 90 a3>
  LLC                             = default
  HLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- CONNECT_IND (PLCI=0x204,DID=05555555,CID=966,CIP=0x4,CONTROLLER=0x4)
       > ISDN_NT#02: msn='*' DNID='05555555' DID
  == ISDN_NT#02: setting format alaw - 0x8 (alaw)
  == ISDN_NT#02: Incoming call '966' -> '05555555'
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea1 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ea1 LEN=0026
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x70
  InfoElement                     = <81>05555555

INFO_RESP                  ID=002 #0x3ea1 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element CALLED PARTY NUMBER
    -- ISDN_NT#02: Updated channel name: CAPI/ISDN_NT#02/05555555-316
    -- ISDN_NT#02: CAPI/ISDN_NT#02/05555555-316: 05555555 matches in context from-ntcapi
       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Ringing'
  == Started pbx on channel CAPI/ISDN_NT#02/05555555-316
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea2 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ea2 LEN=0015
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0xa1
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ea2 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element Sending Complete
  == ISDN_NT#02: pbx already started on channel CAPI/ISDN_NT#02/05555555-316
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea3 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ea3 LEN=0021
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x28
  InfoElement                     = LINK<3d>1

INFO_RESP                  ID=002 #0x3ea3 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element DSP
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea4 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ea4 LEN=0016
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x18
  InfoElement                     = <81>

INFO_RESP                  ID=002 #0x3ea4 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element CHANNEL IDENTIFICATION 81
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea5 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ea5 LEN=0015
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x8005
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ea5 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element SETUP
       > ISDN_NT#02: IE SETUP / SENDING-COMPLETE already received.
    -- Executing Dial("CAPI/ISDN_NT#02/05555555-316", "CAPI/g1/966:5555555") in new stack
       > data = g1/966:5555555 format=8
       > parsed dialstring: 'g1' '966' '5555555' ''
       > capi request group = 2
  == ISDN_TE2#02: setting format alaw - 0x8 (alaw)
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'Not in use'
       > parsed dialstring: 'g1' '966' '5555555' ''
       > capi: peerlink -1 allocated, peer is unlinked
  == ISDN_TE2#02: Call CAPI/ISDN_TE2#02/5555555-317   (pres=0x00, ton=0x01)
CONNECT_REQ                ID=002 #0xf10d LEN=0057
  Controller/PLCI/NCCI            = 0x2
  CIPValue                        = 0x4
  CalledPartyNumber               = <80>5555555
  CallingPartyNumber              = <01 80>966
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo                 
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = <01 00>

    -- Called g1/966:5555555
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0xf10d NCCI=0x00000102
CONNECT_CONF               ID=002 #0xf10d LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0

    -- ISDN_TE2#02: received CONNECT_CONF PLCI = 0x102
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea6 NCCI=0x00000102
INFO_IND                   ID=002 #0x3ea6 LEN=0016
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP                  ID=002 #0x3ea6 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHANNEL IDENTIFICATION 89
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea7 NCCI=0x00000102
INFO_IND                   ID=002 #0x3ea7 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x800d
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ea7 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element SETUP ACK
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ea9 NCCI=0x00000102
INFO_IND                   ID=002 #0x3ea9 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8002
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ea9 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CALL PROCEEDING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '15' (15) ] [ISDN_TE2#02]
    -- CAPI/ISDN_TE2#02/5555555-317 is proceeding passing it to CAPI/ISDN_NT#02/05555555-316
  == ISDN_NT#02: Requested PROCEEDING-Indication for CAPI/ISDN_NT#02/05555555-316
SELECT_B_PROTOCOL_REQ      ID=002 #0xf10e LEN=0023
  Controller/PLCI/NCCI            = 0x204
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default

INFO_REQ                   ID=002 #0xf10f LEN=0023
  Controller/PLCI/NCCI            = 0x204
  CalledPartyNumber               = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = <1e 02 82 88>
   SendingComplete                = default

CAPI: ApplId=0x0002 Command=0x41 SubCommand=0x81 MsgNum=0xf10e NCCI=0x00000204
SELECT_B_PROTOCOL_CONF     ID=002 #0xf10e LEN=0014
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x82 MsgNum=0x3eab NCCI=0x000d0204
CONNECT_B3_IND             ID=002 #0x3eab LEN=0013
  Controller/PLCI/NCCI            = 0xd0204
  NCPI                            = default

CONNECT_B3_RESP            ID=002 #0x3eab LEN=0015
  Controller/PLCI/NCCI            = 0xd0204
  Reject                          = 0x0
  NCPI                            = default

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x81 MsgNum=0xf10f NCCI=0x00000204
INFO_CONF                  ID=002 #0xf10f LEN=0014
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x83 SubCommand=0x82 MsgNum=0x3eac NCCI=0x000d0204
CONNECT_B3_ACTIVE_IND      ID=002 #0x3eac LEN=0013
  Controller/PLCI/NCCI            = 0xd0204
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP     ID=002 #0x3eac LEN=0012
  Controller/PLCI/NCCI            = 0xd0204

  == ISDN_NT#02: Setting up echo canceller (PLCI=0x204, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf110 LEN=0024
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x204, flag=1)
FACILITY_REQ               ID=002 #0xf111 LEN=0023
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf110 NCCI=0x00000204
FACILITY_CONF              ID=002 #0xf110 LEN=0022
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_NT#02: Echo canceller successfully set up (PLCI=0x204)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf111 NCCI=0x00000204
FACILITY_CONF              ID=002 #0xf111 LEN=0019
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_NT#02: DTMF conf(PLCI=0x204)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ead NCCI=0x00000102
INFO_IND                   ID=002 #0x3ead LEN=0017
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1e
  InfoElement                     = <82 88>

INFO_RESP                  ID=002 #0x3ead LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element PI 82 88
       > ISDN_TE2#02: In-band information available
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN_TE2#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eae NCCI=0x00000102
INFO_IND                   ID=002 #0x3eae LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8001
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3eae LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element ALERTING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Ringing (3) ] [ISDN_TE2#02]
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
    -- CAPI/ISDN_TE2#02/5555555-317 is making progress passing it to CAPI/ISDN_NT#02/05555555-316
  == ISDN_NT#02: Requested PROGRESS-Indication for CAPI/ISDN_NT#02/05555555-316
       > ISDN_NT#02: signal_progress in NT: B-channel already up
    -- CAPI/ISDN_TE2#02/5555555-317 is ringing
  == ISDN_NT#02: Requested RINGING-Indication for CAPI/ISDN_NT#02/05555555-316
       > ISDN_NT#02: signal_progress in NT: B-channel already up
ALERT_REQ                  ID=002 #0xf112 LEN=0018
  Controller/PLCI/NCCI            = 0x204
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

CAPI: ApplId=0x0002 Command=0x01 SubCommand=0x81 MsgNum=0xf112 NCCI=0x00000204
ALERT_CONF                 ID=002 #0xf112 LEN=0014
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ee5 NCCI=0x00000102
INFO_IND                   ID=002 #0x3ee5 LEN=0020
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x29
  InfoElement                     = <08 08 1a 13 24>

INFO_RESP                  ID=002 #0x3ee5 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element Date/Time 08/08/26 19:36
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ee6 NCCI=0x00000102
INFO_IND                   ID=002 #0x3ee6 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8007
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ee6 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CONNECT
CAPI: ApplId=0x0002 Command=0x03 SubCommand=0x82 MsgNum=0x3ee8 NCCI=0x00000102
CONNECT_ACTIVE_IND         ID=002 #0x3ee8 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP        ID=002 #0x3ee8 LEN=0012
  Controller/PLCI/NCCI            = 0x102

CONNECT_B3_REQ             ID=002 #0xf148 LEN=0013
  Controller/PLCI/NCCI            = 0x102
  NCPI                            = default

    -- ISDN_TE2#02: sent CONNECT_B3_REQ PLCI=0x102
CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x81 MsgNum=0xf148 NCCI=0x00130102
CONNECT_B3_CONF            ID=002 #0xf148 LEN=0014
  Controller/PLCI/NCCI            = 0x130102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x83 SubCommand=0x82 MsgNum=0x3ee9 NCCI=0x00130102
CONNECT_B3_ACTIVE_IND      ID=002 #0x3ee9 LEN=0013
  Controller/PLCI/NCCI            = 0x130102
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP     ID=002 #0x3ee9 LEN=0012
  Controller/PLCI/NCCI            = 0x130102

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf149 LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ               ID=002 #0xf14a LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Answer (4) ] [ISDN_TE2#02]
    -- CAPI/ISDN_TE2#02/5555555-317 answered CAPI/ISDN_NT#02/05555555-316
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
  == ISDN_NT#02: Requested Indication-STOP for CAPI/ISDN_NT#02/05555555-316
  == ISDN_NT#02: Answering for 05555555
CONNECT_RESP               ID=002 #0x3ea0 LEN=0053
  Controller/PLCI/NCCI            = 0x204
  Reject                          = 0x0
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  ConnectedNumber                 = <01 80>05555555
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = <29 05 08 08 1a 13 24>
   SendingComplete                = default

       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'In use'
    -- Attempting native bridge of CAPI/ISDN_NT#02/05555555-316 and CAPI/ISDN_TE2#02/5555555-317
  == ISDN_NT#02:ISDN_TE2#02 Requested native bridge for CAPI/ISDN_NT#02/05555555-316 and CAPI/ISDN_TE2#02/5555555-317
ISDN_NT#02: transfergroup mismatch 4(0x0),0(0x2)
  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x204, flag=0)
FACILITY_REQ               ID=002 #0xf14b LEN=0023
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <02 00>P<00>P<00 00 00>

  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=0)
FACILITY_REQ               ID=002 #0xf14c LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <02 00>P<00>P<00 00 00>

  == ISDN_NT#02: Setting up echo canceller (PLCI=0x204, function=2, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf14d LEN=0024
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <02 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=2, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf14e LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <02 00 06 04 00 00 00 00 00>

FACILITY_REQ               ID=002 #0xf14f LEN=0032
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x5
  FacilityRequestParameter        = <01 00 0e 00 00 00 00 09 08 02 01 00 00 03 00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14b NCCI=0x00000204
FACILITY_CONF              ID=002 #0xf14b LEN=0019
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_NT#02: DTMF conf(PLCI=0x204)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eea NCCI=0x00000204
INFO_IND                   ID=002 #0x3eea LEN=0015
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x800f
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3eea LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element CONNECT ACK
CAPI: ApplId=0x0002 Command=0x03 SubCommand=0x82 MsgNum=0x3eec NCCI=0x00000204
CONNECT_ACTIVE_IND         ID=002 #0x3eec LEN=0015
  Controller/PLCI/NCCI            = 0x204
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP        ID=002 #0x3eec LEN=0012
  Controller/PLCI/NCCI            = 0x204

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf149 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf149 LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14d NCCI=0x00000204
FACILITY_CONF              ID=002 #0xf14d LEN=0022
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <02 00 02 00 00>

    -- ISDN_NT#02: Echo canceller successfully disabled (PLCI=0x204)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14a NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf14a LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14c NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf14c LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14e NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf14e LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <02 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully disabled (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eed NCCI=0x00000102
INFO_IND                   ID=002 #0x3eed LEN=0037
 Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 13 02 02 d1>W<02 01 22>0<0a a1 05>0<03 02 01 01 82 01 00>

INFO_RESP                  ID=002 #0x3eed LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eee NCCI=0x00000102
INFO_IND                   ID=002 #0x3eee LEN=0019
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x4000
  InfoElement                     = <01 00 00 00>

INFO_RESP                  ID=002 #0x3eee LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHARGE in UNITS
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eef NCCI=0x00000102
INFO_IND                   ID=002 #0x3eef LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8062
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3eef LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf14f NCCI=0x00000204
FACILITY_CONF              ID=002 #0xf14f LEN=0030
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0
  FacilitySelector                = 0x5
  FacilityConfirmationParameter   = <01 00 0a 00 00 07 06 02 01 00 00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x82 MsgNum=0x3ef1 NCCI=0x00000204
FACILITY_IND               ID=002 #0x3ef1 LEN=0022
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x5
  FacilityIndicationParameter     = <01 00 04 02 01 00 00>

    -- ISDN_NT#02: Line Interconnect activated
FACILITY_RESP              ID=002 #0x3ef1 LEN=0015
  Controller/PLCI/NCCI            = 0x204
  FacilitySelector                = 0x5
  FacilityResponseParameters      = default

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ef4 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ef4 LEN=0017
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x8
  InfoElement                     = <80 90>

INFO_RESP                  ID=002 #0x3ef4 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element CAUSE 80 90
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ef5 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ef5 LEN=0015
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x8045
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ef5 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element DISCONNECT
    -- ISDN_NT#02: Disconnect case 3
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN_NT#02]
  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ               ID=002 #0xf150 LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf151 LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: CAPI Hangingup for PLCI=0x102 in state 2
    -- ISDN_TE2#02: activehangingup (cause=16) for PLCI=0x102
DISCONNECT_B3_REQ          ID=002 #0xf152 LEN=0013
  Controller/PLCI/NCCI            = 0x130102
  NCPI                            = default

  == Spawn extension (from-ntcapi, 05555555, 1) exited non-zero on 'CAPI/ISDN_NT#02/05555555-316'
  == ISDN_NT#02: CAPI Hangingup for PLCI=0x204 in state 2
    -- ISDN_NT#02: activehangingup (cause=16) for PLCI=0x204
DISCONNECT_B3_REQ          ID=002 #0xf153 LEN=0013
  Controller/PLCI/NCCI            = 0xd0204
  NCPI                            = default

       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'Not in use'
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'Not in use'
       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Not in use'
       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Not in use'
CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0xf153 NCCI=0x000d0204
DISCONNECT_B3_CONF         ID=002 #0xf153 LEN=0014
  Controller/PLCI/NCCI            = 0xd0204
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x3ef7 NCCI=0x000d0204
DISCONNECT_B3_IND          ID=002 #0x3ef7 LEN=0015
  Controller/PLCI/NCCI            = 0xd0204
  Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP         ID=002 #0x3ef7 LEN=0012
  Controller/PLCI/NCCI            = 0xd0204

DISCONNECT_REQ             ID=002 #0xf154 LEN=0013
  Controller/PLCI/NCCI            = 0x204
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf150 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf150 LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0xf154 NCCI=0x00000204
DISCONNECT_CONF            ID=002 #0xf154 LEN=0014
  Controller/PLCI/NCCI            = 0x204
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ef8 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ef8 LEN=0017
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x8
  InfoElement                     = <80 90>

INFO_RESP                  ID=002 #0x3ef8 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element CAUSE 80 90
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3ef9 NCCI=0x00000204
INFO_IND                   ID=002 #0x3ef9 LEN=0015
  Controller/PLCI/NCCI            = 0x204
  InfoNumber                      = 0x805a
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3ef9 LEN=0012
  Controller/PLCI/NCCI            = 0x204

    -- ISDN_NT#02: info element RELEASE COMPLETE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x3efb NCCI=0x00000204
DISCONNECT_IND             ID=002 #0x3efb LEN=0014
  Controller/PLCI/NCCI            = 0x204
  Reason                          = 0x3490
miner*CLI> 
DISCONNECT_RESP            ID=002 #0x3efb LEN=0012
  Controller/PLCI/NCCI            = 0x204

       > ISDN_NT#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN_NT#02: Interface cleanup PLCI=0x204
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf151 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf151 LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0xf152 NCCI=0x00130102
DISCONNECT_B3_CONF         ID=002 #0xf152 LEN=0014
  Controller/PLCI/NCCI            = 0x130102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x82 MsgNum=0x3efc NCCI=0x00000102
FACILITY_IND               ID=002 #0x3efc LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x5
  FacilityIndicationParameter     = <02 00 06 04 02 00 00 00 00>

FACILITY_RESP              ID=002 #0x3efc LEN=0015
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x5
  FacilityResponseParameters      = default

CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x3efd NCCI=0x00130102
DISCONNECT_B3_IND          ID=002 #0x3efd LEN=0015
  Controller/PLCI/NCCI            = 0x130102
  Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP         ID=002 #0x3efd LEN=0012
  Controller/PLCI/NCCI            = 0x130102

DISCONNECT_REQ             ID=002 #0xf155 LEN=0013
  Controller/PLCI/NCCI            = 0x102
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0xf155 NCCI=0x00000102
DISCONNECT_CONF            ID=002 #0xf155 LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3efe NCCI=0x00000102
INFO_IND                   ID=002 #0x3efe LEN=0037
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 13 02 02 d1>Y<02 01 22>0<0a a1 05>0<03 02 01 01 82 01 01>

INFO_RESP                  ID=002 #0x3efe LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3eff NCCI=0x00000102
INFO_IND                   ID=002 #0x3eff LEN=0019
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x4000
  InfoElement                     = <01 00 00 00>

INFO_RESP                  ID=002 #0x3eff LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHARGE in UNITS
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f00 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f00 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x804d
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f00 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element RELEASE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x3f02 NCCI=0x00000102
DISCONNECT_IND             ID=002 #0x3f02 LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Reason                          = 0x3490

DISCONNECT_RESP            ID=002 #0x3f02 LEN=0012
  Controller/PLCI/NCCI            = 0x102

       > ISDN_TE2#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN_TE2#02: Interface cleanup PLCI=0x102

Und diese Verbindung zur selben Faxnummer ist abgebrochen (eigentlich 3 Seiten):

Code:

CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x82 MsgNum=0x3f03 NCCI=0x00000304
CONNECT_IND                ID=002 #0x3f03 LEN=0046
  Controller/PLCI/NCCI            = 0x304
  CIPValue                        = 0x4
  CalledPartyNumber               = <81>05555555
  CallingPartyNumber              = <01 80>966
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <90 90 a3>
  LLC                             = default
  HLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- CONNECT_IND (PLCI=0x304,DID=05555555,CID=966,CIP=0x4,CONTROLLER=0x4)
       > ISDN_NT#02: msn='*' DNID='05555555' DID
  == ISDN_NT#02: setting format alaw - 0x8 (alaw)
  == ISDN_NT#02: Incoming call '966' -> '05555555'
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f04 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f04 LEN=0026
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x70
  InfoElement                     = <81>05555555

INFO_RESP                  ID=002 #0x3f04 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element CALLED PARTY NUMBER
    -- ISDN_NT#02: Updated channel name: CAPI/ISDN_NT#02/05555555-319
    -- ISDN_NT#02: CAPI/ISDN_NT#02/05555555-319: 05555555 matches in context from-ntcapi
       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Ringing'
  == Started pbx on channel CAPI/ISDN_NT#02/05555555-319
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f05 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f05 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0xa1
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f05 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element Sending Complete
  == ISDN_NT#02: pbx already started on channel CAPI/ISDN_NT#02/05555555-319
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f06 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f06 LEN=0021
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x28
  InfoElement                     = LINK<3d>1

INFO_RESP                  ID=002 #0x3f06 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element DSP
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f07 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f07 LEN=0016
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x18
  InfoElement                     = <81>

INFO_RESP                  ID=002 #0x3f07 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element CHANNEL IDENTIFICATION 81
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f08 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f08 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x8005
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f08 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element SETUP
       > ISDN_NT#02: IE SETUP / SENDING-COMPLETE already received.
    -- Executing Dial("CAPI/ISDN_NT#02/05555555-319", "CAPI/g1/966:5555555") in new stack
       > data = g1/966:5555555 format=8
       > parsed dialstring: 'g1' '966' '5555555' ''
       > capi request group = 2
  == ISDN_TE2#02: setting format alaw - 0x8 (alaw)
       > parsed dialstring: 'g1' '966' '5555555' ''
       > capi: peerlink -1 allocated, peer is unlinked
  == ISDN_TE2#02: Call CAPI/ISDN_TE2#02/5555555-31a   (pres=0x00, ton=0x01)
CONNECT_REQ                ID=002 #0xf156 LEN=0057
  Controller/PLCI/NCCI            = 0x2
  CIPValue                        = 0x4
  CalledPartyNumber               = <80>5555555
  CallingPartyNumber              = <01 80>966
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo                 
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = <01 00>

       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
    -- Called g1/966:5555555
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0xf156 NCCI=0x00000102
CONNECT_CONF               ID=002 #0xf156 LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0

    -- ISDN_TE2#02: received CONNECT_CONF PLCI = 0x102
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f09 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f09 LEN=0016
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP                  ID=002 #0x3f09 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHANNEL IDENTIFICATION 89
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f0a NCCI=0x00000102
INFO_IND                   ID=002 #0x3f0a LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x800d
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f0a LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element SETUP ACK
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f0c NCCI=0x00000102
INFO_IND                   ID=002 #0x3f0c LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8002
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f0c LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CALL PROCEEDING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '15' (15) ] [ISDN_TE2#02]
    -- CAPI/ISDN_TE2#02/5555555-31a is proceeding passing it to CAPI/ISDN_NT#02/05555555-319
  == ISDN_NT#02: Requested PROCEEDING-Indication for CAPI/ISDN_NT#02/05555555-319
SELECT_B_PROTOCOL_REQ      ID=002 #0xf157 LEN=0023
  Controller/PLCI/NCCI            = 0x304
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default

INFO_REQ                   ID=002 #0xf158 LEN=0023
  Controller/PLCI/NCCI            = 0x304
  CalledPartyNumber               = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = <1e 02 82 88>
   SendingComplete                = default

CAPI: ApplId=0x0002 Command=0x41 SubCommand=0x81 MsgNum=0xf157 NCCI=0x00000304
SELECT_B_PROTOCOL_CONF     ID=002 #0xf157 LEN=0014
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x82 MsgNum=0x3f0e NCCI=0x000e0304
CONNECT_B3_IND             ID=002 #0x3f0e LEN=0013
  Controller/PLCI/NCCI            = 0xe0304
  NCPI                            = default

CONNECT_B3_RESP            ID=002 #0x3f0e LEN=0015
  Controller/PLCI/NCCI            = 0xe0304
  Reject                          = 0x0
  NCPI                            = default

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x81 MsgNum=0xf158 NCCI=0x00000304
INFO_CONF                  ID=002 #0xf158 LEN=0014
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x83 SubCommand=0x82 MsgNum=0x3f0f NCCI=0x000e0304
CONNECT_B3_ACTIVE_IND      ID=002 #0x3f0f LEN=0013
  Controller/PLCI/NCCI            = 0xe0304
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP     ID=002 #0x3f0f LEN=0012
  Controller/PLCI/NCCI            = 0xe0304

  == ISDN_NT#02: Setting up echo canceller (PLCI=0x304, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf159 LEN=0024
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x304, flag=1)
FACILITY_REQ               ID=002 #0xf15a LEN=0023
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf159 NCCI=0x00000304
FACILITY_CONF              ID=002 #0xf159 LEN=0022
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_NT#02: Echo canceller successfully set up (PLCI=0x304)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf15a NCCI=0x00000304
FACILITY_CONF              ID=002 #0xf15a LEN=0019
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_NT#02: DTMF conf(PLCI=0x304)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f12 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f12 LEN=0017
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1e
  InfoElement                     = <82 88>

INFO_RESP                  ID=002 #0x3f12 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element PI 82 88
       > ISDN_TE2#02: In-band information available
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN_TE2#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f13 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f13 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8001
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f13 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element ALERTING
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Ringing (3) ] [ISDN_TE2#02]
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
    -- CAPI/ISDN_TE2#02/5555555-31a is making progress passing it to CAPI/ISDN_NT#02/05555555-319
  == ISDN_NT#02: Requested PROGRESS-Indication for CAPI/ISDN_NT#02/05555555-319
       > ISDN_NT#02: signal_progress in NT: B-channel already up
    -- CAPI/ISDN_TE2#02/5555555-31a is ringing
  == ISDN_NT#02: Requested RINGING-Indication for CAPI/ISDN_NT#02/05555555-319
       > ISDN_NT#02: signal_progress in NT: B-channel already up
ALERT_REQ                  ID=002 #0xf15b LEN=0018
  Controller/PLCI/NCCI            = 0x304
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

CAPI: ApplId=0x0002 Command=0x01 SubCommand=0x81 MsgNum=0xf15b NCCI=0x00000304
ALERT_CONF                 ID=002 #0xf15b LEN=0014
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f4b NCCI=0x00000102
INFO_IND                   ID=002 #0x3f4b LEN=0020
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x29
  InfoElement                     = <08 08 1a 13 2a>

INFO_RESP                  ID=002 #0x3f4b LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element Date/Time 08/08/26 19:42
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f4c NCCI=0x00000102
INFO_IND                   ID=002 #0x3f4c LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8007
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f4c LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CONNECT
CAPI: ApplId=0x0002 Command=0x03 SubCommand=0x82 MsgNum=0x3f4e NCCI=0x00000102
CONNECT_ACTIVE_IND         ID=002 #0x3f4e LEN=0015
  Controller/PLCI/NCCI            = 0x102
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP        ID=002 #0x3f4e LEN=0012
  Controller/PLCI/NCCI            = 0x102

CONNECT_B3_REQ             ID=002 #0xf192 LEN=0013
  Controller/PLCI/NCCI            = 0x102
  NCPI                            = default

    -- ISDN_TE2#02: sent CONNECT_B3_REQ PLCI=0x102
CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x81 MsgNum=0xf192 NCCI=0x00140102
CONNECT_B3_CONF            ID=002 #0xf192 LEN=0014
  Controller/PLCI/NCCI            = 0x140102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x83 SubCommand=0x82 MsgNum=0x3f4f NCCI=0x00140102
CONNECT_B3_ACTIVE_IND      ID=002 #0x3f4f LEN=0013
  Controller/PLCI/NCCI            = 0x140102
  NCPI                            = default

CONNECT_B3_ACTIVE_RESP     ID=002 #0x3f4f LEN=0012
  Controller/PLCI/NCCI            = 0x140102

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf193 LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ               ID=002 #0xf194 LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Answer (4) ] [ISDN_TE2#02]
    -- CAPI/ISDN_TE2#02/5555555-31a answered CAPI/ISDN_NT#02/05555555-319
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'In use'
  == ISDN_NT#02: Requested Indication-STOP for CAPI/ISDN_NT#02/05555555-319
  == ISDN_NT#02: Answering for 05555555
CONNECT_RESP               ID=002 #0x3f03 LEN=0053
  Controller/PLCI/NCCI            = 0x304
  Reject                          = 0x0
  BProtocol                      
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  ConnectedNumber                 = <01 80>05555555
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = <29 05 08 08 1a 13 2a>
   SendingComplete                = default

       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'In use'
    -- Attempting native bridge of CAPI/ISDN_NT#02/05555555-319 and CAPI/ISDN_TE2#02/5555555-31a
  == ISDN_NT#02:ISDN_TE2#02 Requested native bridge for CAPI/ISDN_NT#02/05555555-319 and CAPI/ISDN_TE2#02/5555555-31a
ISDN_NT#02: transfergroup mismatch 4(0x0),0(0x2)
  == ISDN_NT#02: Setting up DTMF detector (PLCI=0x304, flag=0)
FACILITY_REQ               ID=002 #0xf195 LEN=0023
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <02 00>P<00>P<00 00 00>

  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=0)
FACILITY_REQ               ID=002 #0xf196 LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <02 00>P<00>P<00 00 00>

  == ISDN_NT#02: Setting up echo canceller (PLCI=0x304, function=2, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf197 LEN=0024
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <02 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=2, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf198 LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <02 00 06 04 00 00 00 00 00>

FACILITY_REQ               ID=002 #0xf199 LEN=0032
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x5
  FacilityRequestParameter        = <01 00 0e 00 00 00 00 09 08 02 01 00 00 03 00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf195 NCCI=0x00000304
FACILITY_CONF              ID=002 #0xf195 LEN=0019
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_NT#02: DTMF conf(PLCI=0x304)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f50 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f50 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x800f
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f50 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element CONNECT ACK
CAPI: ApplId=0x0002 Command=0x03 SubCommand=0x82 MsgNum=0x3f52 NCCI=0x00000304
CONNECT_ACTIVE_IND         ID=002 #0x3f52 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP        ID=002 #0x3f52 LEN=0012
  Controller/PLCI/NCCI            = 0x304

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf193 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf193 LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf197 NCCI=0x00000304
FACILITY_CONF              ID=002 #0xf197 LEN=0022
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <02 00 02 00 00>

    -- ISDN_NT#02: Echo canceller successfully disabled (PLCI=0x304)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf194 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf194 LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf196 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf196 LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f54 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f54 LEN=0037
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 13 02 02 d1>g<02 01 22>0<0a a1 05>0<03 02 01 01 82 01 00>

INFO_RESP                  ID=002 #0x3f54 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f55 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f55 LEN=0019
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x4000
  InfoElement                     = <01 00 00 00>

INFO_RESP                  ID=002 #0x3f55 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHARGE in UNITS
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f56 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f56 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x8062
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f56 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf198 NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf198 LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <02 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully disabled (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf199 NCCI=0x00000304
FACILITY_CONF              ID=002 #0xf199 LEN=0030
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0
  FacilitySelector                = 0x5
  FacilityConfirmationParameter   = <01 00 0a 00 00 07 06 02 01 00 00 00 00>

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x82 MsgNum=0x3f58 NCCI=0x00000304
FACILITY_IND               ID=002 #0x3f58 LEN=0022
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x5
  FacilityIndicationParameter     = <01 00 04 02 01 00 00>

    -- ISDN_NT#02: Line Interconnect activated
FACILITY_RESP              ID=002 #0x3f58 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  FacilitySelector                = 0x5
  FacilityResponseParameters      = default

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f5b NCCI=0x00000304
INFO_IND                   ID=002 #0x3f5b LEN=0017
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x8
  InfoElement                     = <80 90>

INFO_RESP                  ID=002 #0x3f5b LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element CAUSE 80 90
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f5c NCCI=0x00000304
INFO_IND                   ID=002 #0x3f5c LEN=0015
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x8045
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f5c LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element DISCONNECT
    -- ISDN_NT#02: Disconnect case 3
    -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ] [ISDN_NT#02]
  == ISDN_TE2#02: Setting up DTMF detector (PLCI=0x102, flag=1)
FACILITY_REQ               ID=002 #0xf19a LEN=0023
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x1
  FacilityRequestParameter        = <01 00>P<00>P<00 00 00>

  == ISDN_TE2#02: Setting up echo canceller (PLCI=0x102, function=1, options=4, tail=0)
FACILITY_REQ               ID=002 #0xf19b LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x8
  FacilityRequestParameter        = <01 00 06 04 00 00 00 00 00>

  == ISDN_TE2#02: CAPI Hangingup for PLCI=0x102 in state 2
    -- ISDN_TE2#02: activehangingup (cause=16) for PLCI=0x102
DISCONNECT_B3_REQ          ID=002 #0xf19c LEN=0013
  Controller/PLCI/NCCI            = 0x140102
  NCPI                            = default

  == Spawn extension (from-ntcapi, 05555555, 1) exited non-zero on 'CAPI/ISDN_NT#02/05555555-319'
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'Not in use'
       > chan_capi devicestate requested for ISDN_TE2#02/5555555 is 'Not in use'
  == ISDN_NT#02: CAPI Hangingup for PLCI=0x304 in state 2
    -- ISDN_NT#02: activehangingup (cause=16) for PLCI=0x304
DISCONNECT_B3_REQ          ID=002 #0xf19d LEN=0013
  Controller/PLCI/NCCI            = 0xe0304
  NCPI                            = default

       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Not in use'
       > chan_capi devicestate requested for ISDN_NT#02/05555555 is 'Not in use'
CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0xf19d NCCI=0x000e0304
DISCONNECT_B3_CONF         ID=002 #0xf19d LEN=0014
  Controller/PLCI/NCCI            = 0xe0304
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x3f5e NCCI=0x000e0304
DISCONNECT_B3_IND          ID=002 #0x3f5e LEN=0015
  Controller/PLCI/NCCI            = 0xe0304
  Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP         ID=002 #0x3f5e LEN=0012
  Controller/PLCI/NCCI            = 0xe0304

DISCONNECT_REQ             ID=002 #0xf19e LEN=0013
  Controller/PLCI/NCCI            = 0x304
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf19a NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf19a LEN=0019
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x1
  FacilityConfirmationParameter   = <00 00>

       > ISDN_TE2#02: DTMF conf(PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0xf19e NCCI=0x00000304
DISCONNECT_CONF            ID=002 #0xf19e LEN=0014
  Controller/PLCI/NCCI            = 0x304
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f5f NCCI=0x00000304
INFO_IND                   ID=002 #0x3f5f LEN=0017
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x8
  InfoElement                     = <80 90>

INFO_RESP                  ID=002 #0x3f5f LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element CAUSE 80 90
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f60 NCCI=0x00000304
INFO_IND                   ID=002 #0x3f60 LEN=0015
  Controller/PLCI/NCCI            = 0x304
  InfoNumber                      = 0x805a
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f60 LEN=0012
  Controller/PLCI/NCCI            = 0x304

    -- ISDN_NT#02: info element RELEASE COMPLETE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x3f62 NCCI=0x00000304
DISCONNECT_IND             ID=002 #0x3f62 LEN=0014
  Controller/PLCI/NCCI            = 0x304
  Reason                          = 0x3490
miner*CLI> 
DISCONNECT_RESP            ID=002 #0x3f62 LEN=0012
  Controller/PLCI/NCCI            = 0x304

       > ISDN_NT#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN_NT#02: Interface cleanup PLCI=0x304
CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x81 MsgNum=0xf19b NCCI=0x00000102
FACILITY_CONF              ID=002 #0xf19b LEN=0022
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0
  FacilitySelector                = 0x8
  FacilityConfirmationParameter   = <01 00 02 00 00>

    -- ISDN_TE2#02: Echo canceller successfully set up (PLCI=0x102)
CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0xf19c NCCI=0x00140102
DISCONNECT_B3_CONF         ID=002 #0xf19c LEN=0014
  Controller/PLCI/NCCI            = 0x140102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x80 SubCommand=0x82 MsgNum=0x3f63 NCCI=0x00000102
FACILITY_IND               ID=002 #0x3f63 LEN=0024
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x5
  FacilityIndicationParameter     = <02 00 06 04 03 00 00 00 00>

FACILITY_RESP              ID=002 #0x3f63 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  FacilitySelector                = 0x5
  FacilityResponseParameters      = default

CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x3f64 NCCI=0x00140102
DISCONNECT_B3_IND          ID=002 #0x3f64 LEN=0015
  Controller/PLCI/NCCI            = 0x140102
  Reason_B3                       = 0x0
  NCPI                            = default

DISCONNECT_B3_RESP         ID=002 #0x3f64 LEN=0012
  Controller/PLCI/NCCI            = 0x140102

DISCONNECT_REQ             ID=002 #0xf19f LEN=0013
  Controller/PLCI/NCCI            = 0x102
  AdditionalInfo                  = default

CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0xf19f NCCI=0x00000102
DISCONNECT_CONF            ID=002 #0xf19f LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0

CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f65 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f65 LEN=0037
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 13 02 02 d1>i<02 01 22>0<0a a1 05>0<03 02 01 01 82 01 01>

INFO_RESP                  ID=002 #0x3f65 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element FACILITY
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f66 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f66 LEN=0019
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x4000
  InfoElement                     = <01 00 00 00>

INFO_RESP                  ID=002 #0x3f66 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element CHARGE in UNITS
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x3f67 NCCI=0x00000102
INFO_IND                   ID=002 #0x3f67 LEN=0015
  Controller/PLCI/NCCI            = 0x102
  InfoNumber                      = 0x804d
  InfoElement                     = default

INFO_RESP                  ID=002 #0x3f67 LEN=0012
  Controller/PLCI/NCCI            = 0x102

    -- ISDN_TE2#02: info element RELEASE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x3f69 NCCI=0x00000102
DISCONNECT_IND             ID=002 #0x3f69 LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Reason                          = 0x3490

DISCONNECT_RESP            ID=002 #0x3f69 LEN=0012
  Controller/PLCI/NCCI            = 0x102

       > ISDN_TE2#02: CAPI INFO 0x3490: Normal call clearing
  == ISDN_TE2#02: Interface cleanup PLCI=0x102

armincm · 30 Aug 2008

Im Log ist kein Fehler zu sehen und Line-Interconnect wird auch aktiviert.
Die SYNC_ Einträge habe ich auch so. Aber ich dachte du kannst den Mode hier mal Testweise umstellen. Diese Einträge sind 'default', man kann aber auch explizit angeben welcher Port wie gesynct werden soll. Da es bei mir (bei Kunden) mittlerweile an zwei Standorten so eingerichtet ist und keine Probleme bekannt sind, frage ich mich schon, ob es nicht auch an deiner speziellen Situation mit dem Faxserver und dessen ISDN-Anbindung zusammenhängt.
Wenn möglich, hätte ich Vorschläge für Tests:

1) Bis ein update für den V3 Treiber existiert (ich habe bald Urlaub und davor werde ich es wohl nicht mehr schaffen), kannst du das orginal Paket von Dialogic mal Testen. Da hier der Kernel gepatched wird, schlage ich vor eine Kopie deiner Kernelsourcen zu benutzen.

2) An den NT-Port einfach mal ein anderes Gerät hängen und Faxen. Z.B. ein ISDN-ATA mit normalem Faxgerät.

3) Eine Test(Fehler)Verbindung loggen mit 'divactrl mlog' auf beiden Ports. Diese beiden mlogs könnten a) mehr Infos zu einem evnetuellen Fehler zeigen und man könnte b) die B-Kanal Daten vergleichen.

Armin

Ralph* · 31 Aug 2008

Armin,

danke, dass Du Dir das alles durchgesehen hast!

Die Einträge für den SyncMode sind nicht auf Default, ich habe das manuell so nachgetragen. Ich wollte erreichen, dass der Port 4 seinen Sync vom Port 1 (am NTBA) bezieht.

Laut Dialogic beherrscht doch erst die aktuelle Firmware den SyncMode - warum sind die Parameter dann bereits im noch aktuellen v3 enthalten? Haben die derzeit überhaupt eine Wirkung?

Ich warte auf das Update des v3 - natürlich auch noch bis nach Deinem Urlaub. Ich traue mir es schlicht nicht zu, den Kernel wieder in den Ursprungszustand zu versetzen ;-(

Ich habe außer dem Fax-Server und dem Lancom leider kein anderes ISDN-Gerät, das ich versuchsweise mal dranhängen könnte...

Das Log werde ich erstellen und dann posten.

Ralph

armincm · 1 Sep 2008

Das Log solltest du hier nicht posten. Du kannst es mir als email schicken.

Armin

armincm · 20 Mrz 2009

Hallo Ralph*,

der neue v3 Treiber geht nun in die Endphase. Eine Beta-Version habe ich auf dem FTP-Server unter 'beta-test' schonmal abgelegt: 3.1.0b1.

Eventuell möchtest Du schon ein paar Tests machen.
Diese Beta-Version ist eigentlich schon fertig (keine ToDos mehr), kleinere Fixes könnten aber noch fehlen.

Armin

Ralph* · 23 Mrz 2009

Hallo Armin,

das ist ja super! Ich habe den internen So-Bus im Moment zwar gar nicht mehr in Betrieb, weil ich den Faxserver derzeit mit zwei analogen Modems an einem ATA betreibe... was allerdings auch nicht zuverlässig funktioniert!

Ich werde diese Woche allerdings nicht dazu kommen, Deinen neuen Treiber auszuprobieren. Ich hoffe aber, dass ich im Laufe der nächsten Woche wieder mehr Zeit habe und lass Dich dann wissen, wie es gelaufen ist!

Ralph

Gelegentliche Fax-Abbrüche / Diva 4BRI-8 korrekt eingerichtet?

Ralph*

Mitglied

armincm

Aktives Mitglied

Ralph*

Mitglied

Ralph*

Mitglied

armincm

Aktives Mitglied

Ralph*

Mitglied

armincm

Aktives Mitglied

Ralph*

Mitglied

armincm

Aktives Mitglied

armincm

Aktives Mitglied

Ralph*

Mitglied

Neueste Beiträge

Kategorien

Wissenswertes

Statistik des Forums

3CX jetzt einen Monat kostenlos testen

Unternehmen

Lösungen

Nützliche Links

Mehr erfahren