Hallo,
ich versuche gerade eine PrimuX 2S0 zu installieren und mit einem bristuff-asterisk laufen zu lassen. Es scheint richtig geladen zu sein:
Jetzt freu ich mich, scheint zu funktionieren. Aber was soll der 3. Controller? Es ist eine Dual-Karte. Ich hab eine Single-Karte von Gerdes eingebaut, da seh ich dann 2 Controller.
Capi info sagt folgendes:
Wenn ich nun die Telefonnummer anruf kommt besetzt.
Mit einer HFC klappt die Leitung.
Hier meine Capi.conf:
ich versuche gerade eine PrimuX 2S0 zu installieren und mit einem bristuff-asterisk laufen zu lassen. Es scheint richtig geladen zu sein:
Code:
root@voiptest:/var/log# capiinfo
Number of Controllers : 3
Controller 1:
Manufacturer: PrimuX ISDN 3.6.4929 (c) 1995-2009 Gerdes Aktiengesellschaft
CAPI Version: 2.0
Manufacturer Version: 3.6
Serial Number:
BChannels: 2
Global Options: 0x00000ed9
internal controller supported
DTMF supported
Supplementary Services supported
B1 protocols support: 0x0000001f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
B2 protocols support: 0x0000105b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
Transparent (ignoring framing errors of B1 protocol)
LAPD with Q.921 including free SAPI selection
B3 protocols support: 0x00000037
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
T.30 for fax group 3
T.30 for fax group 3 with extensions
0300
0200
d90e0000
1f000000
5b100000
37000000
00000000 00000000 00000000 00000000 00000000 00000000
0000bed3 0000ffff ffff0000 00000000 00000000
Supplementary services support: 0x000007ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Controller 2:
Manufacturer: PrimuX ISDN 3.6.4929 (c) 1995-2009 Gerdes Aktiengesellschaft
CAPI Version: 2.0
Manufacturer Version: 3.6
Serial Number:
BChannels: 2
Global Options: 0x00000ed9
internal controller supported
DTMF supported
Supplementary Services supported
B1 protocols support: 0x0000001f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
B2 protocols support: 0x0000105b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
Transparent (ignoring framing errors of B1 protocol)
LAPD with Q.921 including free SAPI selection
B3 protocols support: 0x00000037
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
T.30 for fax group 3
T.30 for fax group 3 with extensions
0300
0200
d90e0000
1f000000
5b100000
37000000
00000000 00000000 00000000 00000000 00000000 00000000
0000bed3 0000ffff ffff0000 00000000 00000000
Supplementary services support: 0x000007ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Controller 3:
Manufacturer: PrimuX ISDN 3.6.4929 (c) 1995-2009 Gerdes Aktiengesellschaft
CAPI Version: 2.0
Manufacturer Version: 3.6
Serial Number:
BChannels: 2
Global Options: 0x00000ed9
internal controller supported
DTMF supported
Supplementary Services supported
B1 protocols support: 0x0000001f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
B2 protocols support: 0x0000105b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
Transparent (ignoring framing errors of B1 protocol)
LAPD with Q.921 including free SAPI selection
B3 protocols support: 0x00000037
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
T.30 for fax group 3
T.30 for fax group 3 with extensions
0300
0200
d90e0000
1f000000
5b100000
37000000
00000000 00000000 00000000 00000000 00000000 00000000
0400654b 0000ffff ffff0000 00000000 00000000
Supplementary services support: 0x000007ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBSJetzt freu ich mich, scheint zu funktionieren. Aber was soll der 3. Controller? Es ist eine Dual-Karte. Ich hab eine Single-Karte von Gerdes eingebaut, da seh ich dann 2 Controller.
Capi info sagt folgendes:
Code:
voiptest*CLI> capi info
Common ISDN API Driver (1.1.5) www.chan-capi.org
Contr1: 2 B channels total, 2 B channels free.
Contr2: 2 B channels total, 2 B channels free.
Contr3: 2 B channels total, 2 B channels free. (unused)
Code:
voiptest*CLI> capi show channels
CAPI B-channel information:
Line-Name NTmode state i/o bproto isdnstate ton number
----------------------------------------------------------------
ISDN2#02 no ----- - trans 0x00 ''->''
ISDN2#01 no ----- - trans 0x00 ''->''
ISDN1#02 no ----- - trans 0x00 ''->''
ISDN1#01 no ----- - trans 0x00 ''->''Wenn ich nun die Telefonnummer anruf kommt besetzt.
Mit einer HFC klappt die Leitung.
Hier meine Capi.conf:
Code:
[general]
nationalprefix=+43 ; or for example "+49"
internationalprefix=+ ; or for example "+"
;subscriberprefix=+4969 ; prefix including area code (some lines need this)
rxgain=0.0 ;linear receive gain (1.0 = no change)
txgain=0.0 ;linear transmit gain (1.0 = no change)
language=de ;set default language
;ulaw=yes ;set this, if you live in u-law world instead of a-law
;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,
;see Asterisk documentation for all jb* setting available.
jbenable = no
jbforce = no
jbmaxsize = 200
jbresyncthreshold = 1000
jbimpl = fixed
jblog = no
;mohinterpret=default ;Asterisk 1.4: default music on hold class when placed on hold.
mohinterpret = default
; interface sections ...
[ISDN1] ;this example interface gets name 'ISDN1' and may be any
;name not starting with 'g' or 'contr'.
;Use one interface section for each ISDN port!
;ntmode=yes ;if the ISDN card operates in NT-mode, set this to 'yes'
isdnmode=MSN ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial)
;when using NT-mode, 'DID' should be set in any case
incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any
;defaultcid=123 ;set a default caller ID to that interface for dial-out,
;this caller ID will be used when the dial option 'd' is set.
;controller=0 ;ISDN4BSD default
;controller=7 ;ISDN4BSD USB default
controller=1 ;CAPI controller number of this interface/port
group=1 ;dialout group
;prefix=0 ;set a prefix to the calling number on incoming calls
softdtmf=on ;enable/disable software DTMF detection, recommended for AVM cards
relaxdtmf=on ;in addition to softdtmf, you can use relaxed DTMF detection
faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or
;outgoing calls. (default='off', possible values: 'incoming','outgoing','both')
faxdetecttime=0 ;Only detect faxes during the first 'n' seconds of the call.
;(default '0' meaning for the whole duration of the call)
accountcode= ;PBX accountcode to use in CDRs
amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or 'documentation')
context=inbound ;context for incoming calls
;holdtype=hold ;when the PBX puts the call on hold, ISDN HOLD will be used. If
;set to 'local' (default value), no hold is done and the PBX may
;play MOH.
immediate=no ;DID: immediate star
echocancelold=yes
devices=2
[ISDN2]
isdnmode=MSN
incomingmsn=*
controller=2
group=1
softdtmf=on ;enable/disable software DTMF detection, recommended for AVM cards
relaxdtmf=on ;in addition to softdtmf, you can use relaxed DTMF detection
faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or
;outgoing calls. (default='off', possible values: 'incoming','outgoing','both')
faxdetecttime=0 ;Only detect faxes during the first 'n' seconds of the call.
;(default '0' meaning for the whole duration of the call)
accountcode= ;PBX accountcode to use in CDRs
amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or 'documentation')
context=inbound ;context for incoming calls
immediate=no
echocancelold=yes
devices=2
