Hallo!
Ich habe Update gemacht von Asterisk 1.4 auf 10 (1.10.0.8-rc1). Und bekomme jetzt Fehler. Anrufe Interne anrufe und Incoming funktionieren nicht mehr. Raus telefonieren über einen Provider geht klar. Habe schon viel gelesen und ausprobiert, aber alles hat nicht funktioniert. Wenn weitere Daten gebraucht werden, sagt mir. Ich verstehe nur Bahnhof bei dem Fehler. Ich habe gelesen, dass es zu einer Schleife kommt, weil Asterisk sich selbst anruft. Werde mich freuen wenn einer mir helfen kann. Ich habe auch gelesen, dass PHP mit pcntl kompeliert seien soll. Habe ich gemacht und auch noch auf AGI umgestellt. Keine Auswirkung.
Ich habe Update gemacht von Asterisk 1.4 auf 10 (1.10.0.8-rc1). Und bekomme jetzt Fehler. Anrufe Interne anrufe und Incoming funktionieren nicht mehr. Raus telefonieren über einen Provider geht klar. Habe schon viel gelesen und ausprobiert, aber alles hat nicht funktioniert. Wenn weitere Daten gebraucht werden, sagt mir. Ich verstehe nur Bahnhof bei dem Fehler. Ich habe gelesen, dass es zu einer Schleife kommt, weil Asterisk sich selbst anruft. Werde mich freuen wenn einer mir helfen kann. Ich habe auch gelesen, dass PHP mit pcntl kompeliert seien soll. Habe ich gemacht und auch noch auf AGI umgestellt. Keine Auswirkung.
Code:
<SIP/4123456767-0000003e>AGI Tx >> 200 result=0 endpos=9600
<SIP/4123456767-0000003e>AGI Rx << EXEC DIAL SIP/5371234567,60,HiL(3600000:61000:30000)
-- AGI Script Executing Application: (DIAL) Options: (SIP/5371234567,60,HiL(3600000:61000:30000))
> Limit Data for this call:
> timelimit = 3600000 ms (3600.000 s)
> play_warning = 61000 ms (61.000 s)
> play_to_caller = yes
> play_to_callee = no
> warning_freq = 30000 ms (30.000 s)
> start_sound =
> warning_sound = timeleft
> end_sound =
== Using SIP RTP CoS mark 5
-- Called SIP/5371234567
-- Got SIP response 482 "Loop Detected" back from 127.0.0.1:5060
-- SIP/5371234567-0000003f is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
<SIP/4123456767-0000003e>AGI Tx >> 200 result=0
Code:
Global Settings:
----------------
UDP Bindaddress: 0.0.0.0:5060
TCP SIP Bindaddress: Disabled
TLS SIP Bindaddress: Disabled
Videosupport: Yes
Textsupport: Yes
Ignore SDP sess. ver.: No
AutoCreate Peer: No
Match Auth Username: No
Allow unknown access: Yes
Allow subscriptions: Yes
Allow overlap dialing: No
Allow promisc. redir: No
Enable call counters: No
SIP domain support: No
Realm. auth: No
Our auth realm asterisk
Use domains as realms: No
Call to non-local dom.: Yes
URI user is phone no: No
Always auth rejects: No
Direct RTP setup: Yes
User Agent: Asterisk PBX
SDP Session Name: Asterisk PBX 10.8.0-rc1
SDP Owner Name: root
Reg. context: sipregistrations
Regexten on Qualify: No
Trust RPID: No
Send RPID: No
Legacy userfield parse: No
Caller ID: asterisk
From: Domain:
Record SIP history: Off
Call Events: Off
Auth. Failure Events: Off
T.38 support: No
T.38 EC mode: Unknown
T.38 MaxDtgrm: -1
SIP realtime: Enabled
Qualify Freq : 60000 ms
Q.850 Reason header: No
Store SIP_CAUSE: No
Network QoS Settings:
---------------------------
IP ToS SIP: CS3
IP ToS RTP audio: EF
IP ToS RTP video: AF41
IP ToS RTP text: AF41
802.1p CoS SIP: 3
802.1p CoS RTP audio: 5
802.1p CoS RTP video: 4
802.1p CoS RTP text: 3
Jitterbuffer enabled: No
Network Settings:
---------------------------
SIP address remapping: Disabled, no localnet list
Externhost: <none>
Externaddr: 178.xx.xx.xx:0
Externrefresh: 10
Global Signalling Settings:
---------------------------
Codecs: (gsm|ulaw|alaw)
Codec Order: ulaw:20,alaw:20,gsm:20
Relax DTMF: Yes
RFC2833 Compensation: No
Symmetric RTP: Yes
Compact SIP headers: No
RTP Keepalive: 0 (Disabled)
RTP Timeout: 0 (Disabled)
RTP Hold Timeout: 0 (Disabled)
MWI NOTIFY mime type: application/simple-message-summary
DNS SRV lookup: Yes
Pedantic SIP support: No
Reg. min duration 60 secs
Reg. max duration: 3600 secs
Reg. default duration: 120 secs
Outbound reg. timeout: 20 secs
Outbound reg. attempts: 0
Notify ringing state: Yes
Include CID: No
Notify hold state: No
SIP Transfer mode: open
Max Call Bitrate: 384 kbps
Auto-Framing: No
Outb. proxy: <not set>
Session Timers: Accept
Session Refresher: uas
Session Expires: 1800 secs
Session Min-SE: 90 secs
Timer T1: 500
Timer T1 minimum: 100
Timer B: 32000
No premature media: Yes
Max forwards: 70
Default Settings:
-----------------
Allowed transports: UDP
Outbound transport: UDP
Context: default
Force rport: Yes
DTMF: rfc2833
Qualify: 0
Use ClientCode: No
Progress inband: No
Language:
MOH Interpret: default
MOH Suggest:
Voice Mail Extension: asterisk
Realtime SIP Settings:
----------------------
Realtime Peers: Yes
Realtime Regs: No
Cache Friends: Yes
Update: Yes
Ignore Reg. Expire: No
Save sys. name: No
Auto Clear: 120 (Disabled)
Zuletzt bearbeitet von einem Moderator: