größeres Problem in Rev 3558?

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
X

xsapling

Mitglied
Mitglied seit
30 Jan 2005
Beiträge
755
Punkte für Reaktionen
0
Punkte
0
Hi,

ich habe soeben mehrere Firmwares gebaut, alle mit dem selben bzw. mit vergleichbaren Problem(en):

-Internetverbindung konnte nicht mehr aufgebaut werden. Es erscheint auch keine Fehlermeldung darüber, dass der Verbindungsaufbau gescheitert sei. Es wird schlicht kein Verbindungsversuch unternommen.
Code: 
#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
FREETZ_TYPE_FON_WLAN_7270=y
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
# FREETZ_TYPE_FON_WLAN_7270_16MB is not set
FREETZ_TYPE_LABOR=y
# FREETZ_TYPE_LABOR_DSL is not set
FREETZ_TYPE_LABOR_IPV6=y
# FREETZ_TYPE_LABOR_PHONE is not set
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270_labor_ipv6"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=119
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_HELP is not set
FREETZ_REMOVE_ASSISTANT=y
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_PATCH_DSL_EXPERT is not set
FREETZ_PATCH_ENUM=y
FREETZ_PATCH_SIGNED=y
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT2=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTOMOUNT_NTFS=y
FREETZ_AUTOMOUNT_REISER_FS=y
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PATCH_MAXDEVCOUNT=y
# FREETZ_PATCH_MULTIPLE_PRINTERS is not set
# FREETZ_PATCH_GETCONS is not set
FREETZ_REMOVE_SUPPORT=y
FREETZ_REMOVE_UPNP=y
# FREETZ_REMOVE_UPNP_LIBS is not set
FREETZ_REMOVE_USERMAN=y
FREETZ_REMOVE_FTPD=y
# FREETZ_REMOVE_AURA_USB is not set
FREETZ_REMOVE_AVM_VPN=y
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
FREETZ_REMOVE_DECT=y
FREETZ_REMOVE_DTRACE=y
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_ADD_ANNEX_A_FIRMWARE is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
FREETZ_PACKAGE_DNSMASQ=y
FREETZ_PACKAGE_DROPBEAR=y
# FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY is not set
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
FREETZ_PACKAGE_NTFS=y
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set

#
# Web interface
#
FREETZ_PACKAGE_AVM_FIREWALL=y
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
FREETZ_PACKAGE_DOWNLOADER=y
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
FREETZ_PACKAGE_VIRTUALIP_CGI=y
FREETZ_PACKAGE_WOL_CGI=y

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
FREETZ_PACKAGE_INADYN_MT=y
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MDEV is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NDAS is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NFSROOT is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set

#
# OpenSSH
#
# FREETZ_OPENSSH_SSHD is not set
# FREETZ_OPENSSH_CLIENT is not set
# FREETZ_OPENSSH_CLIENTUTILS is not set
# FREETZ_OPENSSH_KEYUTILS is not set
# FREETZ_OPENSSH_SFTPCLIENT is not set
# FREETZ_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_PPTP is not set
# FREETZ_PACKAGE_PPTPD is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
FREETZ_PACKAGE_USBROOT=y
# FREETZ_PACKAGE_USBROOT_E2FSCK is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270_LabIPV6.AnnexB.54.04.94-14620.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
# FREETZ_STATUS_STYLE is not set
# FREETZ_AVMPLUGINS_ENABLED is not set

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV_RENAME is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# IPv6 Options
#
# FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS is not set
# FREETZ_BUSYBOX_PING6 is not set
# FREETZ_BUSYBOX_PSCAN is not set

#
# Kernel modules
#
# FREETZ_MODULES_ALL is not set

#
# crypto
#
# FREETZ_MODULE_crypto_algapi is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_blkcipher is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_cryptomgr is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_musb_hdrc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
FREETZ_MODULE_ext3=y
FREETZ_MODULE_ext2=y
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
FREETZ_MODULE_jbd=y
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
FREETZ_MODULE_reiserfs=y
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
FREETZ_MODULE_mbcache=y

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
FREETZ_MODULE_ipv6=y
# FREETZ_MODULE_sit is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
# FREETZ_LIB_libcrypto is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
# FREETZ_LIB_libcapi20 is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set

#
# Compiler options
#
# FREETZ_DOWNLOAD_TOOLCHAIN is not set
FREETZ_BUILD_TOOLCHAIN=y
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_KERNEL_VERSION_2_6_13_1 is not set
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_30 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_CONFIG_MOD=y
# FREETZ_TARGET_UCLIBC_CONFIG_8MB is not set
# FREETZ_TARGET_UCLIBC_CONFIG_4MB is not set
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_COMPILER_GCC_3_4_6=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set
- in dem letzten Versuch eine Firmware zu basteln, habe ich sogar das Problem gehabt, dass ich dann noch nicht mal mehr an die Oberflächen von Fritz noch von freetz gekommen bin; Internetverbinung ließ sich auch nicht aufbauen.

Code: 
#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
FREETZ_TYPE_FON_WLAN_7270=y
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
# FREETZ_TYPE_FON_WLAN_7270_16MB is not set
FREETZ_TYPE_LABOR=y
# FREETZ_TYPE_LABOR_DSL is not set
FREETZ_TYPE_LABOR_IPV6=y
# FREETZ_TYPE_LABOR_PHONE is not set
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270_labor_ipv6"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=119
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_HELP is not set
FREETZ_REMOVE_ASSISTANT=y
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_PATCH_DSL_EXPERT is not set
FREETZ_PATCH_ENUM=y
FREETZ_PATCH_SIGNED=y
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT2=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTOMOUNT_NTFS=y
FREETZ_AUTOMOUNT_REISER_FS=y
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PATCH_MAXDEVCOUNT=y
# FREETZ_PATCH_MULTIPLE_PRINTERS is not set
# FREETZ_PATCH_GETCONS is not set
FREETZ_REMOVE_SUPPORT=y
FREETZ_REMOVE_UPNP=y
# FREETZ_REMOVE_UPNP_LIBS is not set
FREETZ_REMOVE_USERMAN=y
FREETZ_REMOVE_FTPD=y
# FREETZ_REMOVE_AURA_USB is not set
FREETZ_REMOVE_AVM_VPN=y
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
FREETZ_REMOVE_DECT=y
FREETZ_REMOVE_DTRACE=y
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_ADD_ANNEX_A_FIRMWARE is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
FREETZ_PACKAGE_DNSMASQ=y
FREETZ_PACKAGE_DROPBEAR=y
FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY=y
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
FREETZ_PACKAGE_NTFS=y
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set

#
# Web interface
#
FREETZ_PACKAGE_AVM_FIREWALL=y
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
FREETZ_PACKAGE_DOWNLOADER=y
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
FREETZ_PACKAGE_VIRTUALIP_CGI=y
FREETZ_PACKAGE_WOL_CGI=y

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
FREETZ_PACKAGE_INADYN_MT=y
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MDEV is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NDAS is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NFSROOT is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set

#
# OpenSSH
#
# FREETZ_OPENSSH_SSHD is not set
# FREETZ_OPENSSH_CLIENT is not set
# FREETZ_OPENSSH_CLIENTUTILS is not set
# FREETZ_OPENSSH_KEYUTILS is not set
# FREETZ_OPENSSH_SFTPCLIENT is not set
# FREETZ_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_PPTP is not set
# FREETZ_PACKAGE_PPTPD is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
FREETZ_PACKAGE_USBROOT=y
# FREETZ_PACKAGE_USBROOT_E2FSCK is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270_LabIPV6.AnnexB.54.04.94-14620.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
# FREETZ_STATUS_STYLE is not set
# FREETZ_AVMPLUGINS_ENABLED is not set

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV_RENAME is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# IPv6 Options
#
# FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS is not set
# FREETZ_BUSYBOX_PING6 is not set
# FREETZ_BUSYBOX_PSCAN is not set

#
# Kernel modules
#
# FREETZ_MODULES_ALL is not set

#
# crypto
#
# FREETZ_MODULE_crypto_algapi is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_blkcipher is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_cryptomgr is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_musb_hdrc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
FREETZ_MODULE_ext3=y
FREETZ_MODULE_ext2=y
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
FREETZ_MODULE_jbd=y
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
FREETZ_MODULE_reiserfs=y
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
FREETZ_MODULE_mbcache=y

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
FREETZ_MODULE_ipv6=y
# FREETZ_MODULE_sit is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
# FREETZ_LIB_libcrypto is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
# FREETZ_LIB_libcapi20 is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set

#
# Compiler options
#
# FREETZ_DOWNLOAD_TOOLCHAIN is not set
FREETZ_BUILD_TOOLCHAIN=y
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_KERNEL_VERSION_2_6_13_1 is not set
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_30 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_CONFIG_MOD=y
# FREETZ_TARGET_UCLIBC_CONFIG_8MB is not set
# FREETZ_TARGET_UCLIBC_CONFIG_4MB is not set
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_COMPILER_GCC_3_4_6=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

Kann jemand diesen Fehler nachvollziehen?
 
Hmm, beide mit der aktuellen IPv&-Labor. Wie ist es mit anderen Versionen? Und läuft dieses IPv&-Ding ohne Freetz einwandfrei? Vielleicht liegt der Fehler ja bei AVM...

Alternativ, bzw. zusätzlich: Was sagt das syslog dazu, was vllt /dev/debug mit STD_PRINTK?
 
kannst du diese Zeile hier etwas näher ausführen, denn dann kann ich das gleich mal machen: >> /dev/debug mit STD_PRINTK? <<
 
Das Problem bei AVM ist, dass da alle möglichen Infos verschwinden, die normalerweise im syslog landen sollten, da sie aus einem mir unerfindlichem grunde das debug-device für DECT-Steuerung missbrauchen.
Von daher kann man mit einem "echo STD_PRINTK > /dev/deug" mehr infos rausbekommen aus den Boxen, allerdings funktioneirt dann erstmal DECT nicht mehr. Per Reboot oder per "echo AVM_PRINTK > /dev/debug" ist das normale Verhalten wiederhergestellt. Dennoch wäre das syslog interessant.
 

Anhänge

  • config3558.txt
    20.6 KB · Aufrufe: 2
so hier ist der Syslog mit STP_PRINTK:

Code: 
Jan  1 01:01:06 fritz syslog.info syslogd started: BusyBox v1.12.4
Jan  1 01:01:06 fritz user.notice kernel: klogd started: BusyBox v1.12.4 (2009-07-26 21:08:28 CEST)
Jan  1 01:01:06 fritz user.notice kernel: Linux version 2.6.19.2 () (gcc version 3.4.6) #1 Sun Jul 26 20:26:40 CEST 2009
Jan  1 01:01:06 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Jan  1 01:01:06 fritz user.warn kernel: mips-config1: JTAG pressent
Jan  1 01:01:06 fritz user.warn kernel: mips-config1: TLB size 16
Jan  1 01:01:06 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Jan  1 01:01:06 fritz user.warn kernel: CPU revision is: 00019068
Jan  1 01:01:06 fritz user.err kernel: [mips_clock] default 360000000 MHz
Jan  1 01:01:06 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2215717 Bank 0x2021 Async 0xc42c301
Jan  1 01:01:06 fritz user.err kernel: [ur8_pci_init]
Jan  1 01:01:06 fritz user.err kernel: [pci] default: 33 MHz
Jan  1 01:01:06 fritz user.err kernel: [setup_pci_master]
Jan  1 01:01:06 fritz user.err kernel: [setup_pci_slave]
Jan  1 01:01:06 fritz user.err kernel: Exposing 67108864 memory over PCI
Jan  1 01:01:06 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Jan  1 01:01:06 fritz user.err kernel: PCI Interface Running
Jan  1 01:01:06 fritz user.err kernel: PCI controller initialized
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan  1 01:01:06 fritz user.warn kernel: Determined physical RAM map:
Jan  1 01:01:06 fritz user.warn kernel:  memory: 03fc0000 @ 14000000 (usable)
Jan  1 01:01:06 fritz user.warn kernel:  memory: 00040000 @ 17fc0000 (reserved)
Jan  1 01:01:06 fritz user.warn kernel: [init_bootmem]
Jan  1 01:01:06 fritz user.warn kernel: [free_bootmem]
Jan  1 01:01:06 fritz user.warn kernel: [reserve_bootmem]
Jan  1 01:01:06 fritz user.debug kernel: On node 0 totalpages: 98240
Jan  1 01:01:06 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan  1 01:01:06 fritz user.err kernel: [mem_map-hack]: move map base from 0x942a4000 to 0x94024000
Jan  1 01:01:06 fritz user.debug kernel:   DMA zone: 767 pages used for memmap
Jan  1 01:01:06 fritz user.debug kernel:   DMA zone: 0 pages reserved
Jan  1 01:01:06 fritz user.debug kernel:   DMA zone: 97473 pages, LIFO batch:31
Jan  1 01:01:06 fritz user.debug kernel:   Normal zone: 0 pages used for memmap
Jan  1 01:01:06 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17fc0000
Jan  1 01:01:06 fritz user.err kernel: [request_resource] Kernel data: start 0x141b92a8 < root->start 0x17fc0000
Jan  1 01:01:06 fritz user.warn kernel: Built 1 zonelists.  Total pages: 97473
Jan  1 01:01:06 fritz user.notice kernel: Kernel command line: init=/etc/init.d/rc.usbroot  usbroot=/dev/sda2:ext2:/rootfs-090809 ro,noatime,nodiratime console=ttyS0,38400n8r
Jan  1 01:01:06 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 01:01:06 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan  1 01:01:06 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 01:01:06 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 01:01:06 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 01:01:06 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 01:01:06 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan  1 01:01:06 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan  1 01:01:06 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan  1 01:01:06 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 01:01:06 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 01:01:06 fritz user.warn kernel: [free_all_bootmem]
Jan  1 01:01:06 fritz user.info kernel: Memory: 61568k/65280k available (1764k kernel code, 3608k reserved, 451k data, 132k init, 0k highmem)
Jan  1 01:01:06 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan  1 01:01:06 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan  1 01:01:06 fritz user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 16
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init]
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x00800000 Byte 8 MBytes
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90010000,0x90780000
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90010000
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90780000,0x907C0000
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x907C0000,0x90800000
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan  1 01:01:06 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan  1 01:01:06 fritz user.err kernel: Master and Slave Enabled
Jan  1 01:01:06 fritz user.info kernel: pktsched: using high resolution timer
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 2
Jan  1 01:01:06 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:01:06 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 01:01:06 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:01:06 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan  1 01:01:06 fritz user.info kernel: TCP reno registered
Jan  1 01:01:06 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan  1 01:01:06 fritz user.info kernel: io scheduler noop registered (defau
Jan  1 01:01:06 fritz user.info kernel: lt)
Jan  1 01:01:06 fritz user.info kernel: avm_net_trace: Up and running.
Jan  1 01:01:06 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio 
Jan  1 01:01:06 fritz user.warn kernel: 
Jan  1 01:01:06 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jul 26 2009 20:23:56)
Jan  1 01:01:06 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan  1 01:01:06 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan  1 01:01:06 fritz user.err kernel: [cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.110-r820-trunk-VLAN-Fix_ADM_und_Tantos  -  Revision 538:821  -  Di 23. Jun 16:20:50 CEST 2009
Jan  1 01:01:06 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan  1 01:01:06 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:01:06 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan  1 01:01:06 fritz user.notice kernel: physmap platform flash device: 00800001 at 10000000
Jan  1 01:01:06 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 01:01:06 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 01:01:06 fritz user.warn kernel: physmap-flash.1: Swapping erase regions for broken CFI table.
Jan  1 01:01:06 fritz user.notice kernel: number of CFI chips: 1
Jan  1 01:01:06 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 01:01:06 fritz user.notice kernel: RedBoot partition parsing not available
Jan  1 01:01:06 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:06 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x10000 len 7798784)
Jan  1 01:01:06 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:06 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan  1 01:01:06 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x10000 len 7798784 blocksize=10000)
Jan  1 01:01:06 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0xcbe00
Jan  1 01:01:06 fritz user.warn kernel: [ur8_squashfs_parser_function]: not enough space for JFFS2!
Jan  1 01:01:06 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan  1 01:01:06 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan  1 01:01:06 fritz user.notice kernel: 0x000cbe00-0x00780000 : "rootfs"
Jan  1 01:01:06 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan  1 01:01:06 fritz user.notice kernel: 0x00010000-0x000cbe00 : "kernel"
Jan  1 01:01:06 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan  1 01:01:06 fritz user.notice kernel: 0x00000000-0x00010000 : "urlader"
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan  1 01:01:06 fritz user.notice kernel: 0x00780000-0x007c0000 : "tffs (1)"
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan  1 01:01:06 fritz user.notice kernel: 0x007c0000-0x00800000 : "tffs (2)"
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan  1 01:01:06 fritz user.notice kernel: 0x00000000-0x00800000 : "reserved"
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] name reserved
Jan  1 01:01:06 fritz user.warn kernel: [ur8_mtd_add_notifier] skip reserved
Jan  1 01:01:06 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:01:06 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan  1 01:01:06 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan  1 01:01:06 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan  1 01:01:06 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan  1 01:01:06 fritz user.info kernel: TCP cubic registered
Jan  1 01:01:06 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 1
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 17
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 8
Jan  1 01:01:06 fritz user.info kernel: NET: Registered protocol family 20
Jan  1 01:01:06 fritz user.warn kernel: MUSB UR8 pdev active!
Jan  1 01:01:06 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan  1 01:01:06 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan  1 01:01:06 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan  1 01:01:06 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan  1 01:01:06 fritz user.err kernel: PCI_BE_INT_En: 0
Jan  1 01:01:06 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan  1 01:01:06 fritz user.err kernel: [pci_int_init] done
Jan  1 01:01:06 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 01:01:06 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:01:06 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)
Jan  1 01:01:06 fritz user.info kernel: Adam2 environment variables API installed.
Jan  1 01:01:06 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan  1 01:01:06 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:01:06 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan  1 01:01:06 fritz user.info kernel: Freeing unused kernel memory: 132k freed
Jan  1 01:01:06 fritz user.warn kernel: TFFS Name Table F
Jan  1 01:01:06 fritz user.warn kernel: Piglet_noemif: module license '
Jan  1 01:01:06 fritz user.warn kernel: (C) Copyright 2007 by AVM
Jan  1 01:01:06 fritz user.err upnpd[1188]: Diese FRITZ!Box kann ueber fritz.fonwlan.box angesprochen werden.
Jan  1 01:01:06 fritz user.warn kernel: ' taintskernel.
Jan  1 01:01:06 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan  1 01:01:06 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan  1 01:01:06 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan  1 01:01:06 fritz user.warn kernel: patch_dectfw: patch_adress: 7094 max_len: 22 with Version 2 Len: 16
Jan  1 01:01:06 fritz user.warn kernel: patch_dectfw: c0084000,
Jan  1 01:01:06 fritz user.info kernel:  datalen = 32159, 
Jan  1 01:01:06 fritz user.warn kernel: 
Jan  1 01:01:06 fritz user.warn kernel: **************************************************************
Jan  1 01:01:06 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan  1 01:01:06 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan  1 01:01:06 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan  1 01:01:06 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047815 Hz
Jan  1 01:01:06 fritz user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 01:01:06 fritz user.info kernel: usbcore: registered new interface driver hub
Jan  1 01:01:06 fritz user.info kernel: usbcore: registered new device driver usb
Jan  1 01:01:06 fritz user.info kernel: musb_hdrc: version 2.2a/db-0.5.1, cppi-dma, host, debug=0
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: MHDRC RTL version 1.500 
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: setup fifo_mode 2
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: 7/9 max ep, 2624/4096 memory
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 0shared, max 64
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 1tx, max 512
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 1rx, max 512
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 2tx, max 512
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 2rx, max 512
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 3shared, max 256
Jan  1 01:01:06 fritz user.debug kernel: musb_hdrc: hw_ep 4shared, max 256
Jan  1 01:01:06 fritz user.info kernel: musb_hdrc: USB Host mode controller at a3400000 using DMA, IRQ 39
Jan  1 01:01:06 fritz user.info kernel: musb_hdrc musb_hdrc: MUSB HDRC host driver
Jan  1 01:01:06 fritz user.info kernel: musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Jan  1 01:01:06 fritz user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 01:01:06 fritz user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 01:01:06 fritz user.info kernel: hub 1-0:1.0: 1 port detected
Jan  1 01:01:06 fritz user.notice kernel: SCSI subsystem initialized
Jan  1 01:01:06 fritz user.info kernel: Initializing USB Mass Storage driver...
Jan  1 01:01:06 fritz user.info kernel: usbcore: registered new interface driver usb-storage
Jan  1 01:01:06 fritz user.info kernel: USB Mass Storage support registered.
Jan  1 01:01:06 fritz user.info kernel: usb 1-1: new high speed USB device using musb_hdrc and address 2
Jan  1 01:01:06 fritz user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 01:01:06 fritz user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 01:01:06 fritz user.debug kernel: usb-storage: device found at 2
Jan  1 01:01:06 fritz user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan  1 01:01:06 fritz user.notice kernel: scsi 0:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
Jan  1 01:01:06 fritz user.notice kernel: SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
Jan  1 01:01:07 fritz user.notice kernel: sda: Write Protect is off
Jan  1 01:01:07 fritz user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan  1 01:01:07 fritz user.err kernel: sda: assuming drive cache: write through
Jan  1 01:01:07 fritz user.notice kernel: SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
Jan  1 01:01:07 fritz user.notice kernel: sda: Write Protect is off
Jan  1 01:01:07 fritz user.debug kernel: sda: Mode Sense: 43 00 00 00
Jan  1 01:01:07 fritz user.err kernel: sda: assuming drive cache: write through
Jan  1 01:01:07 fritz user.info kernel:  sda: sda1 sda2 sda3 sda4
Jan  1 01:01:07 fritz user.notice kernel: sd 0:0:0:0: Attached scsi removable disk sda
Jan  1 01:01:07 fritz user.debug kernel: usb-storage: device scan complete
Jan  1 01:01:07 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan  1 01:01:07 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan  1 01:01:07 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan  1 01:01:07 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan  1 01:01:07 fritz user.warn kernel: 
Jan  1 01:01:07 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan  1 01:01:07 fritz user.info upnpd[1188]: OemStringData.MAC:001C4A58D937
Jan  1 01:01:07 fritz user.info upnpd[1188]: get_wlan_ssid=cvw3fitZIZJacisDBzM4
Jan  1 01:01:07 fritz user.info upnpd[1188]: OemStringData.BOXID='cvw3fitZIZJacisDBzM4', _boxenv_name_and_version='AVM FRITZ!Box Fon WLAN 7270 54.04.94'
Jan  1 01:01:07 fritz user.info upnpd[1188]: desc=cvw3fitZIZJacisDBzM4 UPnP/1.0 AVM FRITZ!Box Fon WLAN 7270 54.04.94
Jan  1 01:01:07 fritz user.info upnpd[1188]: startup (Jun 29 2009 16:23:42)
Jan  1 01:01:07 fritz user.info upnpd[1188]: verbose: DISABLED
Jan  1 01:01:10 fritz user.info tr069discover[1280]: startup ifacewatch...
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface cpmac0 new.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface cpmac0 up.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface cpmac0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:01:10 fritz user.info tr069discover[1280]: setup_dhcp_for_interfaces: lan, used_for_dhcpc=1
Jan  1 01:01:10 fritz user.info tr069discover[1280]: setup_dhcp_for_interfaces: eth0, used_for_dhcpc=0
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lo new.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lo up.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lo IFF_UP=1, IFF_RUNNING=64
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface eth0 new.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface eth0 up.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface eth0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lan new.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lan up.
Jan  1 01:01:10 fritz user.info tr069discover[1280]: interface lan IFF_UP=1, IFF_RUNNING=64
Jan  1 01:01:10 fritz user.info tr069discover[1280]: 1 Packets
Jan  1 01:01:10 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:01:12 fritz authpriv.info dropbear[1863]: Running in background
Jan  1 01:01:12 fritz user.info eventadd[1866]: EVENT(140): Partition unter uStor01 eingebunden
Jan  1 01:01:13 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:01:14 fritz user.info telefon[1978]: websrv_init with support_stream(1)
Jan  1 01:01:15 fritz user.err multid[1252]: upnpdev_stop: upnpavmlogd not found
Jan  1 01:01:15 fritz user.info eventadd[2054]: EVENT(142): Der USB-Speicher uStor02 enthält kein unterstütztes Dateisystem oder hat eine ungültige Partitionstabelle. (Das Gerät hat den folgenden Typ: NOTMOUNTABLE)
Jan  1 01:01:15 fritz user.info eventadd[2072]: EVENT(140): Partition unter uStor03 eingebunden
Jan  1 01:01:16 fritz user.info multid[2026]: stopped.
Jan  1 01:01:16 fritz user.info multid[2082]: startup ($Revision: 1.213 $$CompileDate: Jun 29 2009 16:23:44 $)
Jan  1 01:01:16 fritz user.info multid[2084]: new cpmac driver detected
Jan  1 01:01:16 fritz user.info multid[2084]: enabling non-ATA-Mode
Jan  1 01:01:16 fritz user.info multid[2084]: nqos_bridge_configured: is_vinax=0, is_ata=0
Jan  1 01:01:16 fritz user.info multid[2084]: normal
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.err multid[2084]: if6_clearipaddr: eth0: socket(2) failed - Address family not supported by protocol (124)
Jan  1 01:01:16 fritz user.err multid[2084]: if6_clearipaddr: ath0: socket(2) failed - Address family not supported by protocol (124)
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info multid[2084]: mrouter: using IGMPv3 for upstream interface dsl
Jan  1 01:01:16 fritz user.info multid[2084]: mrouter: using IGMPv3 for other interfaces
Jan  1 01:01:16 fritz user.err multid[2084]: udpserver: 0.0.0.0:53: bind failed - Address already in use (125)
Jan  1 01:01:16 fritz user.info multid[2084]: 125: enterprice 3561 suboption 4 op=0x2ad57670
Jan  1 01:01:16 fritz user.info multid[2084]: 125: enterprice 3561 suboption 5 op=0x2ad57670
Jan  1 01:01:16 fritz user.info multid[2084]: 125: enterprice 3561 suboption 6 op=0x2ad57670
Jan  1 01:01:16 fritz user.info multid[2084]: DHCPD: TR111 enabled
Jan  1 01:01:16 fritz user.err multid[2084]: DHCPD on lan:0 skipped, is virtual interface
Jan  1 01:01:16 fritz user.info multid[2084]: DDNS: ddd.no-ip.org
Jan  1 01:01:16 fritz user.info multid[2084]: DDNS: 1 accounts
Jan  1 01:01:16 fritz user.err multid[2084]: radv_init: socket() failed - Address family not supported by protocol (124)
Jan  1 01:01:16 fritz user.err multid[2084]: radv_init: failed
Jan  1 01:01:16 fritz user.err multid[2084]: socket(family=10,type=1,protocol=17): failed - Address family not supported by protocol (124)
Jan  1 01:01:16 fritz user.err multid[2084]: BUG csock_set_dgramreadcount: called with NULL socket
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] of multid[2084]:
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] Number of functions: 4
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] bugmsg+0x28 (/lib/libavmcsock.so.2 at 00042014)
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] csock_datagram_want_rcvinfo+0x54 (/lib/libavmcsock.so.2 at 0002ce28)
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] dhcpv6d_init+0xd4 (multid at 0042aa9c)
Jan  1 01:01:16 fritz user.err multid[2084]: [bt] main+0x1de8 (multid at 00409f0c)
Jan  1 01:01:16 fritz user.err multid[2084]: dhcpv6d: csock_dgramserver failed
Jan  1 01:01:16 fritz user.err multid[2084]: dhcpv6d_init: failed
Jan  1 01:01:16 fritz user.info multid[2084]: interface cpmac0 new.
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info multid[2084]: interface cpmac0 up.
Jan  1 01:01:16 fritz user.info multid[2084]: interface lo new.
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info multid[2084]: mrouter: lan: vif 0 if_index 4
Jan  1 01:01:16 fritz user.info multid[2084]: interface lo up.
Jan  1 01:01:16 fritz user.info multid[2084]: mrouter: lo: no multicast interface, ignored.
Jan  1 01:01:16 fritz user.info multid[2084]: interface eth0 new.
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info multid[2084]: interface eth0 up.
Jan  1 01:01:16 fritz user.info multid[2084]: interface lan new.
Jan  1 01:01:16 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:16 fritz user.info multid[2084]: lan: ULA: fd00::21c:4aff:fe58:d937
Jan  1 01:01:16 fritz user.info multid[2084]: interface lan up.
Jan  1 01:01:16 fritz user.err multid[2084]: netlink: ip6addr add fd00::21c:4aff:fe58:d937/64 dev lan (4) - Invalid argument (22)
Jan  1 01:01:16 fritz user.err multid[2084]: Can't open /dev/kdsld_multid - No such device or address (6)
Jan  1 01:01:16 fritz user.err multid[2084]: can't get major of kdsld
Jan  1 01:01:16 fritz user.info multid[2084]: CONFIG_LOGD disabled: No UPnP-Device for avmlogd
Jan  1 01:01:16 fritz user.err multid[2084]: call pupnpdev_start_onlinestore
Jan  1 01:01:16 fritz user.err multid[2084]: call pupnpdev_start_usb
Jan  1 01:01:16 fritz user.info multid[2084]: verbose: DISABLED
Jan  1 01:01:16 fritz user.err multid[2084]: process_upnp_rec: ADDDEV failed
Jan  1 01:01:16 fritz user.err multid[2084]: process_upnp_rec: ADDDEV failed
Jan  1 01:01:17 fritz user.info eventadd[2157]: EVENT(142): Der USB-Speicher uStor04 enthält kein unterstütztes Dateisystem oder hat eine ungültige Partitionstabelle. (Das Gerät hat den folgenden Typ: NOTMOUNTABLE)
Jan  1 01:01:18 fritz user.info mediasrv[2169]: websrv_init with support_stream(1)
Jan  1 01:01:18 fritz user.info mediasrv[2169]: EVENT(220): Mediaserver startet.
Jan  1 01:01:20 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:01:23 fritz user.err tr069starter[1901]: tr069starter: /var/media/ftp/uStor01/tr069start.config or /var/media/ftp/uStor01/fritzboxconfig.import not found - exit
Jan  1 01:01:25 fritz user.err tr069starter[2080]: tr069starter: /var/media/ftp/uStor03/tr069start.config or /var/media/ftp/uStor03/fritzboxconfig.import not found - exit
Jan  1 01:01:33 fritz daemon.warn Tor[2301]: eventdns: Unable to add nameserver 192.168.180.1: error 2
Jan  1 01:01:33 fritz daemon.warn Tor[2301]: eventdns: Unable to add nameserver 192.168.180.2: error 2
Jan  1 01:01:33 fritz daemon.warn Tor[2301]: Unable to parse '/etc/resolv.conf', or no nameservers in '/etc/resolv.conf' (6)
Jan  1 01:01:33 fritz daemon.warn Tor[2301]: Couldn't set up any working nameservers. Network not up yet?  Will try again soon.
Jan  1 01:01:35 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:01:36 fritz user.info mediasrv[2240]: EVENT(221): Mediaserver mit 261 Mediendateien gestartet. Alle Mediendateien stehen zur Verfügung.
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: OpenVPN 2.1_rc18 mipsel-linux [SSL] [LZO2] [EPOLL] built on Aug  9 2009
Jan  1 01:01:38 fritz daemon.warn openvpn[2372]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: Diffie-Hellman initialized with 1024 bit key
Jan  1 01:01:38 fritz daemon.warn openvpn[2372]: WARNING: file '/tmp/flash/box.key' is group or others accessible
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: Control Channel Authentication: using '/tmp/flash/static.key' as a OpenVPN static key file
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: TLS-Auth MTU parms [ L:1591 D:168 EF:68 EB:0 ET:0 EL:0 ]
Jan  1 01:01:38 fritz daemon.warn openvpn[2372]: OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options
Jan  1 01:01:38 fritz daemon.warn openvpn[2372]: OpenVPN ROUTE: failed to parse/resolve route for host/network: 172.30.1.0
Jan  1 01:01:38 fritz user.info tr069discover[1280]: interface tap0 new.
Jan  1 01:01:38 fritz user.info tr069discover[1280]: netinterface_info lan  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:38 fritz user.info tr069discover[1280]: interface tap0 up.
Jan  1 01:01:38 fritz user.info tr069discover[1280]: interface tap0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: TUN/TAP device tap0 opened
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: TUN/TAP TX queue length set to 100
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: /sbin/ifconfig tap0 172.30.1.201 netmask 255.255.255.0 mtu 1500 broadcast 172.30.1.255
Jan  1 01:01:38 fritz user.info tr069discover[1280]: netinterface_info tap0  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:38 fritz user.info tr069discover[1280]: netinterface_info tap0  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:38 fritz user.info tr069discover[1280]: netinterface_info tap0  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:38 fritz daemon.notice openvpn[2372]: Data Channel MTU parms [ L:1591 D:1450 EF:59 EB:4 ET:32 EL:0 ]
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: chroot to '/tmp/openvpn' and cd to '/' succeeded
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: GID set to openvpn
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: UID set to openvpn
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: Listening for incoming TCP connection on [undef]:1143
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: Socket Buffers: R=[87380->131072] S=[16384->131072]
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: TCPv4_SERVER link local (bound): [undef]:1143
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: TCPv4_SERVER link remote: [undef]
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: MULTI: multi_init called, r=256 v=256
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: IFCONFIG POOL: base=172.30.1.202 size=5
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: MULTI: TCP INIT maxclients=5 maxevents=9
Jan  1 01:01:38 fritz daemon.notice openvpn[2376]: Initialization Sequence Completed
Jan  1 01:01:38 fritz user.info tr069discover[1280]: netinterface_info tap0  IFF_UP=1, IFF_RUNNING=1
Jan  1 01:01:39 fritz daemon.notice Tor[2301]: Your Tor server's identity key fingerprint is '3rf3tgg8 0BA7 29C7 82E1 3AB1 5D11 119F E147 5BCB 6D93 4008'
Jan  1 01:01:41 fritz daemon.warn Tor[2301]: Our clock is 3508 days, 19 hours, 58 minutes behind the time published in the consensus network status document (2009-08-09 20:00:00 GMT).  Tor needs an accurate clock to work correctly. Please check your time and date setti
Jan  1 01:01:49 fritz daemon.info hcid[2512]: Bluetooth HCI daemon
Jan  1 01:01:49 fritz daemon.info sdpd[2514]: Bluetooth SDP daemon
Jan  1 01:01:52 fritz user.warn INADYN[2585]: Sat Jan  1 01:01:52 2000: W:IP: Error 0x80 resolving host name 'checkip.dyndns.org'
Jan  1 01:01:52 fritz user.warn INADYN[2585]: Sat Jan  1 01:01:52 2000: W:DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Jan  1 01:01:52 fritz user.warn INADYN[2585]: Sat Jan  1 01:01:52 2000: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)
Jan  1 01:01:55 fritz authpriv.info dropbear[2594]: Child connection from 172.30.1.114:61603
Jan  1 01:01:57 fritz authpriv.notice dropbear[2594]: pubkey auth succeeded for 'root' with key md5 91:d9:19:d9:06:d8:33:b9:e9:7e:2a:cf:e6:7d:12:36 from 172.30.1.114:61603
Jan  1 01:02:01 fritz cron.err crond[1401]: USER root pid 2677 cmd telnet localhost:25
Jan  1 01:02:04 fritz daemon.notice Tor[2301]: I learned some more directory information, but not enough to build a circuit: We have no recent network-status consensus.
Jan  1 01:02:07 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:02:47 fritz user.warn kernel: 
Jan  1 01:02:47 fritz user.warn kernel: [avm_debug]standard kernel-messages
Jan  1 01:03:01 fritz cron.err crond[1401]: USER root pid 3563 cmd telnet localhost:25
Jan  1 01:03:11 fritz user.info tr069discover[1280]: discover_request to iface lan sent
Jan  1 01:03:21 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0,1,2,3 10sec
Jan  1 01:03:40 fritz user.err tr069discover[1280]: discover_timeout_cb occured!, sig=0
Jan  1 01:03:54 fritz user.warn INADYN[2585]: Sat Jan  1 01:03:54 2000: W:IP: Error 0x80 resolving host name 'checkip.dyndns.org'
Jan  1 01:03:54 fritz user.warn INADYN[2585]: Sat Jan  1 01:03:54 2000: W:DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Jan  1 01:03:54 fritz user.warn INADYN[2585]: Sat Jan  1 01:03:54 2000: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)
Jan  1 01:04:01 fritz cron.err crond[1401]: USER root pid 5088 cmd telnet localhost:25
Jan  1 01:05:09 fritz cron.err crond[1401]: USER root pid 7484 cmd telnet localhost:25
Jan  1 01:05:09 fritz cron.err crond[1401]: USER root pid 7485 cmd screen -p 0 -S via -X stuff $'1'
Jan  1 01:05:17 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2 
Jan  1 01:05:17 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2_act 
Jan  1 01:05:22 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2 
Jan  1 01:05:22 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2_act 
Jan  1 01:05:25 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2 
Jan  1 01:05:25 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2_act 
Jan  1 01:05:26 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0,1,2,3 10sec
Jan  1 01:05:30 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2 
Jan  1 01:05:30 fritz user.err ctlmgr[852]: ctlmgr - sar.c - Error: unknown key exp_pm_mode_L2_act 
Jan  1 01:06:01 fritz cron.err crond[1401]: USER root pid 9564 cmd telnet localhost:25
Jan  1 01:06:03 fritz user.warn INADYN[2585]: Sat Jan  1 01:06:03 2000: W:IP: Error 0x80 resolving host name 'checkip.dyndns.org'
Jan  1 01:06:03 fritz user.warn INADYN[2585]: Sat Jan  1 01:06:03 2000: W:DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Jan  1 01:06:03 fritz user.warn INADYN[2585]: Sat Jan  1 01:06:03 2000: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)
Jan  1 01:06:07 fritz user.err dsld[9796]: not running
Jan  1 01:06:30 fritz user.info dsld[10801]: startup (Jun 29 2009 16:23:55)
Jan  1 01:06:30 fritz user.info dsld[10801]: new cpmac driver detected
Jan  1 01:06:30 fritz user.info tr069discover[10812]: startup ($Revision: 1.9 $$CompileDate: Jun 29 2009 16:23:52 $)
Jan  1 01:06:30 fritz user.info tr069discover[10818]: CONFIG_ETH_COUNT=4
Jan  1 01:06:30 fritz user.info dsld[10810]: DSL Mac 00:1c:4a:58:d9:39
Jan  1 01:06:30 fritz user.info dsld[10810]: VOIP Mac 00:1c:4a:58:d9:3a
Jan  1 01:06:30 fritz user.info dsld[10810]: VCC2 Mac 00:1c:4a:58:d9:3b
Jan  1 01:06:30 fritz user.info dsld[10810]: VCC3 Mac 00:1c:4a:58:d9:38
Jan  1 01:06:30 fritz user.err dsld[10810]: Can't open /dev/kdsld - No such device or address (6)
Jan  1 01:06:31 fritz user.info dsld[10810]: BUDGET led: off
Jan  1 01:06:32 fritz user.info dsld[10810]: ikeapi_checkserver ap == 0
Jan  1 01:06:32 fritz user.err dsld[10810]: ioctl(KDSLD_IPSECBRIDGE_SETCONFIG): failed - Bad file descriptor (9)
Jan  1 01:06:32 fritz user.err dsld[10810]: ioctl(KDSLD_VPN_DISABLE): failed - Bad file descriptor (9)
Jan  1 01:06:32 fritz user.err dsld[10810]: VPN led value = 0
Jan  1 01:06:32 fritz user.err dsld[10810]: ioctl(KDSLD_UNSETUP): failed - Bad file descriptor (9)
Jan  1 01:06:36 fritz user.err dsld[11085]: not running
Jan  1 01:06:40 fritz user.info tr069discover[10818]: startup ifacewatch...
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface cpmac0 new.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface cpmac0 up.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface cpmac0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:06:40 fritz user.info tr069discover[10818]: setup_dhcp_for_interfaces: lan, used_for_dhcpc=1
Jan  1 01:06:40 fritz user.info tr069discover[10818]: setup_dhcp_for_interfaces: eth0, used_for_dhcpc=0
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lo new.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lo up.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lo IFF_UP=1, IFF_RUNNING=64
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface eth0 new.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface eth0 up.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface eth0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lan new.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lan up.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface lan IFF_UP=1, IFF_RUNNING=64
Jan  1 01:06:40 fritz user.info tr069discover[10818]: 1 Packets
Jan  1 01:06:40 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface tap0 new.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface tap0 up.
Jan  1 01:06:40 fritz user.info tr069discover[10818]: interface tap0 IFF_UP=1, IFF_RUNNING=64
Jan  1 01:06:45 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:06:54 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:06:59 fritz user.info dsld[12116]: startup (Jun 29 2009 16:23:55)
Jan  1 01:06:59 fritz user.info dsld[12116]: new cpmac driver detected
Jan  1 01:06:59 fritz user.info tr069discover[12130]: startup ($Revision: 1.9 $$CompileDate: Jun 29 2009 16:23:52 $)
Jan  1 01:06:59 fritz user.err tr069discover[12135]: already running (10818), exit
Jan  1 01:06:59 fritz user.info dsld[12128]: DSL Mac 00:1c:4a:58:d9:39
Jan  1 01:06:59 fritz user.info dsld[12128]: VOIP Mac 00:1c:4a:58:d9:3a
Jan  1 01:06:59 fritz user.info dsld[12128]: VCC2 Mac 00:1c:4a:58:d9:3b
Jan  1 01:06:59 fritz user.info dsld[12128]: VCC3 Mac 00:1c:4a:58:d9:38
Jan  1 01:06:59 fritz user.err dsld[12128]: Can't open /dev/kdsld - No such device or address (6)
Jan  1 01:07:00 fritz user.info dsld[12128]: BUDGET led: off
Jan  1 01:07:01 fritz cron.err crond[1401]: USER root pid 12199 cmd telnet localhost:25
Jan  1 01:07:01 fritz user.info dsld[12128]: ikeapi_checkserver ap == 0
Jan  1 01:07:01 fritz user.err dsld[12128]: ioctl(KDSLD_IPSECBRIDGE_SETCONFIG): failed - Bad file descriptor (9)
Jan  1 01:07:01 fritz user.err dsld[12128]: ioctl(KDSLD_VPN_DISABLE): failed - Bad file descriptor (9)
Jan  1 01:07:01 fritz user.err dsld[12128]: VPN led value = 0
Jan  1 01:07:01 fritz user.err dsld[12128]: ioctl(KDSLD_UNSETUP): failed - Bad file descriptor (9)
Jan  1 01:07:11 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:07:31 fritz user.debug kernel: mcfw: group 0.0.0.0: query cpmac:0,1,2,3 10sec
Jan  1 01:07:44 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:08:01 fritz cron.err crond[1401]: USER root pid 14736 cmd telnet localhost:25
Jan  1 01:08:04 fritz user.warn INADYN[2585]: Sat Jan  1 01:08:04 2000: W:IP: Error 0x80 resolving host name 'checkip.dyndns.org'
Jan  1 01:08:04 fritz user.warn INADYN[2585]: Sat Jan  1 01:08:04 2000: W:DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Jan  1 01:08:04 fritz user.warn INADYN[2585]: Sat Jan  1 01:08:04 2000: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)
Jan  1 01:08:47 fritz user.info tr069discover[10818]: discover_request to iface lan sent
Jan  1 01:09:01 fritz cron.err crond[1401]: USER root pid 17279 cmd telnet localhost:25
Jan  1 01:09:10 fritz user.err tr069discover[10818]: discover_timeout_cb occured!, sig=0
das einzige das mir hier auffallen würde, wäre die nicht gestellte Uhrzeit. Ist das relevant für den Aufbau der Internetverbindung?
 
Versuch mal bitte ein Image ohne "replace kernel".

MfG Oliver
 
Code: 
Jan  1 01:06:59 fritz user.err dsld[12128]: Can't open /dev/kdsld - No such device or address (6)
Das könnte doch was damit zu tun haben, oder? Meintest du das,Oliver?

Jörg
 
hier noch ein kleiner Nachschlag. Box ohne Stick.

Code: 
Jan  1 01:01:45 fritz syslog.info syslogd started: BusyBox v1.12.4
Jan  1 01:01:45 fritz user.notice kernel: klogd started: BusyBox v1.12.4 (2009-07-26 20:19:25 CEST)
Jan  1 01:01:45 fritz user.notice kernel: Linux version 2.6.19.2 () (gcc version 3.4.6) #1 Sun Jul 26 20:26:40 CEST 2009
Jan  1 01:01:45 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Jan  1 01:01:45 fritz user.warn kernel: mips-config1: JTAG pressent
Jan  1 01:01:45 fritz user.warn kernel: mips-config1: TLB size 16
Jan  1 01:01:45 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Jan  1 01:01:45 fritz user.warn kernel: CPU revision is: 00019068
Jan  1 01:01:45 fritz user.err kernel: [mips_clock] default 360000000 MHz
Jan  1 01:01:45 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2215717 Bank 0x2021 Async 0xc42c301
Jan  1 01:01:45 fritz user.err kernel: [ur8_pci_init]
Jan  1 01:01:45 fritz user.err kernel: [pci] default: 33 MHz
Jan  1 01:01:45 fritz user.err kernel: [setup_pci_master]
Jan  1 01:01:45 fritz user.err kernel: [setup_pci_slave]
Jan  1 01:01:45 fritz user.err kernel: Exposing 67108864 memory over PCI
Jan  1 01:01:45 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Jan  1 01:01:45 fritz user.err kernel: PCI Interface Running
Jan  1 01:01:45 fritz user.err kernel: PCI controller initialized
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan  1 01:01:45 fritz user.warn kernel: Determined physical RAM map:
Jan  1 01:01:45 fritz user.warn kernel:  memory: 03fc0000 @ 14000000 (usable)
Jan  1 01:01:45 fritz user.warn kernel:  memory: 00040000 @ 17fc0000 (reserved)
Jan  1 01:01:45 fritz user.warn kernel: [init_bootmem]
Jan  1 01:01:45 fritz user.warn kernel: [free_bootmem]
Jan  1 01:01:45 fritz user.warn kernel: [reserve_bootmem]
Jan  1 01:01:45 fritz user.debug kernel: On node 0 totalpages: 98240
Jan  1 01:01:45 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan  1 01:01:45 fritz user.err kernel: [mem_map-hack]: move map base from 0x942a4000 to 0x94024000
Jan  1 01:01:45 fritz user.debug kernel:   DMA zone: 767 pages used for memmap
Jan  1 01:01:45 fritz user.debug kernel:   DMA zone: 0 pages reserved
Jan  1 01:01:45 fritz user.debug kernel:   DMA zone: 97473 pages, LIFO batch:31
Jan  1 01:01:45 fritz user.debug kernel:   Normal zone: 0 pages used for memmap
Jan  1 01:01:45 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17fc0000
Jan  1 01:01:45 fritz user.err kernel: [request_resource] Kernel data: start 0x141b92a8 < root->start 0x17fc0000
Jan  1 01:01:45 fritz user.warn kernel: Built 1 zonelists.  Total pages: 97473
Jan  1 01:01:45 fritz user.notice kernel: Kernel command line: init=/etc/init.d/rc.usbroot  usbroot=/dev/sda2:ext2:/rootfs-260709 ro,noatime,nodiratime console=ttyS0,38400n8r
Jan  1 01:01:45 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 01:01:45 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan  1 01:01:45 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 01:01:45 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 01:01:45 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 01:01:45 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 01:01:45 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan  1 01:01:45 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan  1 01:01:45 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan  1 01:01:45 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 01:01:45 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 01:01:45 fritz user.warn kernel: [free_all_bootmem]
Jan  1 01:01:45 fritz user.info kernel: Memory: 61568k/65280k available (1764k kernel code, 3608k reserved, 451k data, 132k init, 0k highmem)
Jan  1 01:01:45 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan  1 01:01:45 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan  1 01:01:45 fritz user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 16
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init]
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x00800000 Byte 8 MBytes
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90010000,0x90780000
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90010000
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90780000,0x907C0000
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x907C0000,0x90800000
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan  1 01:01:45 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan  1 01:01:45 fritz user.err kernel: Master and Slave Enabled
Jan  1 01:01:45 fritz user.info kernel: pktsched: using high resolution timer
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 2
Jan  1 01:01:45 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:01:45 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 01:01:45 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:01:45 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan  1 01:01:45 fritz user.info kernel: TCP reno registered
Jan  1 01:01:45 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan  1 01:01:45 fritz user.info kernel: io scheduler noop registered (defau
Jan  1 01:01:45 fritz user.info kernel: lt)
Jan  1 01:01:45 fritz user.info kernel: avm_net_trace: Up and running.
Jan  1 01:01:45 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio 
Jan  1 01:01:45 fritz user.warn kernel: 
Jan  1 01:01:45 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jul 26 2009 20:23:56)
Jan  1 01:01:45 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan  1 01:01:45 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan  1 01:01:45 fritz user.err kernel: [cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.110-r820-trunk-VLAN-Fix_ADM_und_Tantos  -  Revision 538:821  -  Di 23. Jun 16:20:50 CEST 2009
Jan  1 01:01:45 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan  1 01:01:45 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:01:45 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[EMAIL="[email protected]"][email protected][/EMAIL]>
Jan  1 01:01:45 fritz user.notice kernel: physmap platform flash device: 00800001 at 10000000
Jan  1 01:01:45 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 01:01:45 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 01:01:45 fritz user.warn kernel: physmap-flash.1: Swapping erase regions for broken CFI table.
Jan  1 01:01:45 fritz user.notice kernel: number of CFI chips: 1
Jan  1 01:01:45 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 01:01:45 fritz user.notice kernel: RedBoot partition parsing not available
Jan  1 01:01:45 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:45 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x10000 len 7798784)
Jan  1 01:01:45 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0x720000, size 393216
Jan  1 01:01:45 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x943f1a3c
Jan  1 01:01:45 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan  1 01:01:45 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x10000 len 7798784 blocksize=10000)
Jan  1 01:01:45 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0xcbe00
Jan  1 01:01:45 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan  1 01:01:45 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan  1 01:01:45 fritz user.notice kernel: 0x000cbe00-0x00780000 : "rootfs"
Jan  1 01:01:45 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan  1 01:01:45 fritz user.notice kernel: 0x00010000-0x000cbe00 : "kernel"
Jan  1 01:01:45 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan  1 01:01:45 fritz user.notice kernel: 0x00000000-0x00010000 : "urlader"
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan  1 01:01:45 fritz user.notice kernel: 0x00780000-0x007c0000 : "tffs (1)"
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan  1 01:01:45 fritz user.notice kernel: 0x007c0000-0x00800000 : "tffs (2)"
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan  1 01:01:45 fritz user.notice kernel: 0x00720000-0x00780000 : "jffs2"
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan  1 01:01:45 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan  1 01:01:45 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:01:45 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan  1 01:01:45 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan  1 01:01:45 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan  1 01:01:45 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan  1 01:01:45 fritz user.info kernel: TCP cubic registered
Jan  1 01:01:45 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 1
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 17
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 8
Jan  1 01:01:45 fritz user.info kernel: NET: Registered protocol family 20
Jan  1 01:01:45 fritz user.warn kernel: MUSB UR8 pdev active!
Jan  1 01:01:45 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan  1 01:01:45 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan  1 01:01:45 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan  1 01:01:45 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan  1 01:01:45 fritz user.err kernel: PCI_BE_INT_En: 0
Jan  1 01:01:45 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan  1 01:01:45 fritz user.err kernel: [pci_int_init] done
Jan  1 01:01:45 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:01:45 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 01:01:45 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)
Jan  1 01:01:45 fritz user.info kernel: Adam2 environment variables API installed.
Jan  1 01:01:45 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan  1 01:01:45 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:01:45 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan  1 01:01:45 fritz user.info kernel: Freeing unused kernel memory: 132k freed
Jan  1 01:01:45 fritz user.warn kernel: TFFS Name Table F
Jan  1 01:01:45 fritz user.warn kernel: Piglet_noemif: module license '
Jan  1 01:01:45 fritz user.warn kernel: (C) Copyright 2007 by AVM
Jan  1 01:01:45 fritz user.warn kernel: ' taintskernel.
Jan  1 01:01:45 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan  1 01:01:45 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan  1 01:01:45 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan  1 01:01:45 fritz user.warn kernel: patch_dectfw: patch_adress: 7094 max_len: 22 with Version 2 Len: 16
Jan  1 01:01:45 fritz user.warn kernel: patch_dectfw: c0
Jan  1 01:01:45 fritz user.info kernel: 084000, datalen = 32159, 
Jan  1 01:01:45 fritz user.warn kernel: 
Jan  1 01:01:45 fritz user.warn kernel: **************************************************************
Jan  1 01:01:45 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan  1 01:01:45 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan  1 01:01:45 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan  1 01:01:45 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047815 Hz
Jan  1 01:01:45 fritz user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 01:01:45 fritz user.info kernel: usbcore: registered new interface driver hub
Jan  1 01:01:45 fritz user.info kernel: usbcore: registered new device driver usb
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc: version 2.2a/db-0.5.1, cppi-dma, host, debug=0
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: MHDRC RTL version 1.500 
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: setup fifo_mode 2
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: 7/9 max ep, 2624/4096 memory
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 0shared, max 64
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 1tx, max 512
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 1rx, max 512
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 2tx, max 512
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 2rx, max 512
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 3shared, max 256
Jan  1 01:01:45 fritz user.debug kernel: musb_hdrc: hw_ep 4shared, max 256
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc: USB Host mode controller at a3400000 using DMA, IRQ 39
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc musb_hdrc: MUSB HDRC host driver
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Jan  1 01:01:45 fritz user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 01:01:45 fritz user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 01:01:45 fritz user.info kernel: hub 1-0:1.0: 1 port detected
Jan  1 01:01:45 fritz user.notice kernel: SCSI subsystem initialized
Jan  1 01:01:45 fritz user.info kernel: Initializing USB Mass Storage driver...
Jan  1 01:01:45 fritz user.info kernel: usbcore: registered new interface driver usb-storage
Jan  1 01:01:45 fritz user.info kernel: USB Mass Storage support registered.
Jan  1 01:01:45 fritz user.info kernel: usbcore: deregistering interface driver usb-storage
Jan  1 01:01:45 fritz user.warn kernel: musb_platform_disable 131: dma still active
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc musb_hdrc: remove, state 1
Jan  1 01:01:45 fritz user.info kernel: usb usb1: USB disconnect, address 1
Jan  1 01:01:45 fritz user.warn kernel: musb_platform_disable 131: dma still active
Jan  1 01:01:45 fritz user.warn kernel: musb_hdrc musb_hdrc: musb_stop, root hub still active
Jan  1 01:01:45 fritz user.info kernel: musb_hdrc musb_hdrc: USB bus 1 deregistered
Jan  1 01:01:45 fritz user.info kernel: usbcore: deregistering device driver usb
Jan  1 01:01:45 fritz user.info kernel: usbcore: deregistering interface driver usbfs
Jan  1 01:01:45 fritz user.info kernel: usbcore: deregistering interface driver hub
Jan  1 01:01:45 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan  1 01:01:45 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan  1 01:01:45 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan  1 01:01:45 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan  1 01:01:45 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan  1 01:01:45 fritz user.warn kernel: 
Jan  1 01:01:45 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan  1 01:01:46 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:01:46 fritz user.err ctlmgr[634]: ctlmgr: plugin_install()
Jan  1 01:01:46 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:01:46 fritz authpriv.info dropbear[1310]: Running in background
Jan  1 01:01:47 fritz user.err multid[1338]: not running
Jan  1 01:01:47 fritz user.info multid[1339]: startup ($Revision: 1.213 $$CompileDate: Jun 29 2009 16:23:44 $)
Jan  1 01:01:47 fritz user.info multid[1341]: new cpmac driver detected
Jan  1 01:01:47 fritz user.info multid[1341]: enabling non-ATA-Mode
Jan  1 01:01:47 fritz user.info multid[1341]: nqos_bridge_configured: is_vinax=0, is_ata=0
Jan  1 01:01:47 fritz user.info multid[1341]: normal
Jan  1 01:01:47 fritz user.err multid[1341]: if_clearipaddr: lan:0: SIOCSIFADDR failed - No such device (19)
Jan  1 01:01:47 fritz user.err multid[1341]: if6_clearipaddr: eth0: socket(2) failed - Address family not supported by protocol (124)
Jan  1 01:01:47 fritz user.err multid[1341]: if6_clearipaddr: ath0: socket(2) failed - Address family not supported by protocol (124)
Jan  1 01:01:47 fritz user.info multid[1341]: mrouter: using IGMPv3 for upstream interface dsl
Jan  1 01:01:47 fritz user.info multid[1341]: mrouter: using IGMPv3 for other interfaces
Jan  1 01:01:47 fritz user.err multid[1341]: udpserver: 0.0.0.0:53: bind failed - Address already in use (125)
Jan  1 01:01:47 fritz user.info multid[1341]: 125: enterprice 3561 suboption 4 op=0x2ad6f660
Jan  1 01:01:47 fritz user.info multid[1341]: 125: enterprice 3561 suboption 5 op=0x2ad6f660
Jan  1 01:01:47 fritz user.info multid[1341]: 125: enterprice 3561 suboption 6 op=0x2ad6f660
Jan  1 01:01:47 fritz user.info multid[1341]: DHCPD: TR111 enabled
Jan  1 01:01:47 fritz user.err multid[1341]: DHCPD on lan:0 skipped, is virtual interface
Jan  1 01:01:47 fritz user.info multid[1341]: DDNS: gg.no-ip.org
Jan  1 01:01:47 fritz user.info multid[1341]: DDNS: 1 accounts
Jan  1 01:01:47 fritz user.err multid[1341]: radv_init: socket() failed - Address family not supported by protocol (124)
Jan  1 01:01:47 fritz user.err multid[1341]: radv_init: failed
Jan  1 01:01:47 fritz user.err multid[1341]: socket(family=10,type=1,protocol=17): failed - Address family not supported by protocol (124)
Jan  1 01:01:47 fritz user.err multid[1341]: BUG csock_set_dgramreadcount: called with NULL socket
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] of multid[1341]:
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] Number of functions: 4
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] bugmsg+0x28 (/lib/libavmcsock.so.2 at 00042014)
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] csock_datagram_want_rcvinfo+0x54 (/lib/libavmcsock.so.2 at 0002ce28)
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] dhcpv6d_init+0xd4 (multid at 0042aa9c)
Jan  1 01:01:47 fritz user.err multid[1341]: [bt] main+0x1de8 (multid at 00409f0c)
Jan  1 01:01:47 fritz user.err multid[1341]: dhcpv6d: csock_dgramserver failed
Jan  1 01:01:47 fritz user.err multid[1341]: dhcpv6d_init: failed
Jan  1 01:01:47 fritz user.info multid[1341]: interface cpmac0 new.
Jan  1 01:01:47 fritz user.info multid[1341]: interface cpmac0 up.
Jan  1 01:01:47 fritz user.info multid[1341]: interface lo new.
Jan  1 01:01:47 fritz user.info multid[1341]: interface lan up.
Jan  1 01:01:47 fritz user.info multid[1341]: mrouter: lan: vif 0 if_index 4
Jan  1 01:01:47 fritz user.info multid[1341]: interface lo up.
Jan  1 01:01:47 fritz user.info multid[1341]: mrouter: lo: no multicast interface, ignored.
Jan  1 01:01:47 fritz user.info multid[1341]: interface eth0 new.
Jan  1 01:01:47 fritz user.info multid[1341]: interface eth0 up.
Jan  1 01:01:47 fritz user.info multid[1341]: interface eth0 up.
Jan  1 01:01:47 fritz user.info multid[1341]: interface lan new.
Jan  1 01:01:47 fritz user.info multid[1341]: lan: ULA: fd00::21c:4aff:fe58:d937
Jan  1 01:01:47 fritz user.info multid[1341]: interface lan up.
Jan  1 01:01:47 fritz user.err multid[1341]: Can't open /dev/kdsld_multid - No such device or address (6)
Jan  1 01:01:47 fritz user.err multid[1341]: can't get major of kdsld
Jan  1 01:01:47 fritz user.info multid[1341]: verbose: DISABLED
Jan  1 01:01:47 fritz user.err multid[1341]: netlink: ip6addr add fd00::21c:4aff:fe58:d937/64 dev lan (4) - Invalid argument (22)
Jan  1 01:01:48 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:01:48 fritz user.err ctlmgr[634]: ctlmgr: plugin_install()
Jan  1 01:01:48 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:01:50 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:01:52 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:01 fritz cron.err crond[1167]: USER root pid 1466 cmd telnet localhost:25
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:02 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:03 fritz user.warn INADYN[1513]: Sat Jan  1 01:02:03 2000: W:IP: Error 0x80 resolving host name 'checkip.dyndns.org'
Jan  1 01:02:03 fritz user.warn INADYN[1513]: Sat Jan  1 01:02:03 2000: W:DYNDNS: Error 'RC_IP_INVALID_REMOTE_ADDR' (0x12) when talking to IP server
Jan  1 01:02:03 fritz user.warn INADYN[1513]: Sat Jan  1 01:02:03 2000: W:'RC_IP_INVALID_REMOTE_ADDR' (0x12) updating the IPs. (it 0)
Jan  1 01:02:03 fritz user.warn kernel: 
Jan  1 01:02:03 fritz user.warn kernel: [avm_debug]standard kernel-messages
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:12 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:16 fritz user.err ctlmgr[634]: ssdp_search_timeout: No answer on 5 attempts. Abort it
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:22 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:23 fritz user.err ctlmgr[634]: ctlmgr: plugin_install()
Jan  1 01:02:23 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:02:25 fritz user.err ctlmgr[634]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.1:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: 0.0.0.0:7077: failed to send datagram to 192.168.180.2:53 - Network is unreachable (128)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
Jan  1 01:02:32 fritz user.err voipd[1074]: [EMAIL="[email protected]"][email protected][/EMAIL]: REGISTER failed 2 status 500 (try again in 10 seconds)
 
Zuletzt bearbeitet:
Und wie sieht das Log ohne replaced kernel aus, damit man einen Vergleich hat? Wird /dev/kdsld angelegt?
 
Ja, ich hatte das log duchgesehen, ein Problem mit kdsld konnte ich dann nicht mehr beobachten.

Was könnte ihr daraus entnehmen?
 
Darasu entnehmen wir zuerst einmal einen Anhaltspunkt, nämlich dass das Device nicht erzeugt wird/werden kann oder wurde. Logischerweise können deiner verbindungen nciht entstehen, ohne das zugehörige Device. Somit: Findet man die Stelle, wo etwas schief läuft im vergleich zum ersetzten Kernel, dann ist das Problem behoben.
 
Meine beiden 7170 rennen problemlos mit replaced kernel über DSL, das ist also kein generelles Problem.
 
dann spiel doch mal ein build mit der config aus dem Anfangsbeitrag ein. geht deine 7270 dann immer noch? Das kannst du doch einfach testen mit push_firmware. Wenns dann nicht geht einfach die ursprüngliche - bei dir gerade laufende Version - wieder drauf.
 
Und einen Werksreset dabei gleich noch dazu, denn nach der ipv6 ist das sicherlich noetig.
 
Den Werksreset kann man sich doch sparen, wenn man vorher in freetz ein all-inklusive-backup macht und im Anschluss an den Test wieder einspielt, oder?
 
Richtig, ist aber dennoch mehr zu tun als einfach zu flashen. Selbst das Bauen dauert ja nun, da man alles neu bauen muss mit ipv6...
 
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 689 (Mitglieder: 24, Gäste: 665)

Neueste Beiträge

Statistik des Forums

Themen
246,274
Beiträge
2,249,296
Mitglieder
373,863
Neuestes Mitglied
RuthBeatty
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück