Grandstream GXV3140 und VoipPro, wer benutzt das selbe Gerat? <teilweise GELöST>

[jos_]

Is there anyone using VoipPro as a sip provider with their GXV3140?

What settings do you use?

Got a softphone (QuteCom) to register with VoipPro in a few seconds

VoipPro shows connected and green on the Grandstream display (saying: "I am registered"), but when I make a call I get a "busy tone" (but my account is charged nevertheless!)

FYI:
it took some fiddling before the phone registered, but that worked after I changed the Preferred Vocoder

Appreciate your help!

Sie konnen auch auf Deutsch antworten, komme aus Holland

 

[jos_]

Issue partly SOLVED, BUT.... possible programming error?

I compared settings <account 2> with those of another provider <account 1>; I found that some settings mysteriously varied (local sip port changed fm 5062 to 5064; DTMF turned on instead of off, RFC5168 support enabled instead of off, Jitter Buffer Type changed from Fixed to Adaptive; Jitter Buffer Length changed fm Low to Medium)

After changing <account 2> settings to those of <account 1> I noticed a change in the phones behaviour; I could now connect to a land phone with no problem, but my mobile phone still gave an error ("404 NOT FOUND Wrong number or remote party not on line")

Ultimately I found out what I did "wrong". I dialled from the phone book, where I put my land line in the "Phone" entry, and my mobile in the "Mobile" entry
When I put my mobile number in the "Phone" entry, it makes a call all right
When I put my mobile number in the "Mobile" entry, I get the following error: "404 NOT FOUND Wrong number or remote party not on line"
Does this indicate a programming error?

FYI: when I dial my mobile number direct (after choosing line two - account 2 - in this case), the call comes through all right

System info:
Product Model :GXV3140 Hardware Revision :V2.2A Part Number :9630002522A Boot Version :1.0.7.2 Core Version :1.0.7.6 DSP Version :1.0.5.25 Base Version :1.0.7.56 Program Version :1.0.7.76 GUI-A Version :1.0.7.2 GUI-B Version :1.0.7.3 Recovery Version :1.0.7.2 CPE Version :1.0.1.27 System Up Time :15 hours, 28 minutes, 9 seconds