Hilfe, was kann das bedeuten? Unable to request channel

[blacky_2009]

Hallo,

die Telefone kommunizieren jetzt untereinander, allerdings kann ich noch nicht raus telefonieren und bekomme folgende Fehlermeldung im Cli:

Was kann das bedeuten, und wie merze ich den Fehler aus:

Feb 27 07:18:36 NOTICE[2711]: chan_local.c:526 local_alloc: No such extension/context 97501749110750174911014@default creating local channel
Feb 27 07:18:36 NOTICE[2711]: channel.c:2514 __ast_request_and_dial: Unable to request channel Local/97501749110750174911014@default

Hier die aktuelle sip.conf:

[general]
port=5060
bindaddr=0.0.0.0

; register SIP account on remote machine if using SIP trunks
register => xxxxxxxxxx:[email protected]
;
; setup account for SIP trunking:
[SIPtrunk]
insecure=very
context = default
disallow=all
allow=ulaw
;allow=gsm
allow=alaw
;allow=ilbc
type=friend
username=xxxxxxxxxxxxxxxxxxxx
secret=xxxxxxxxxxxxx
host=sip.pbx-network.de
dtmfmode=inband
qualify=1000

[cc100]
disallow=all
allow=ulaw
allow=alaw
type=peer
username=cc100
secret=test
host=dynamic
dtmfmode=inband
qualify=1000
mailbox=100

[cc101]
disallow=all
allow=ulaw
allow=alaw
type=peer
username=cc101
secret=test
host=dynamic
dtmfmode=inband
qualify=1000
mailbox=101

[cc102]
disallow=all
allow=ulaw
allow=alaw
type=peer
username=cc102
secret=test
host=dynamic
dtmfmode=inband
qualify=1000
mailbox=102

[cc103]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=cc103
secret=test
host=dynamic
dtmfmode=inband
qualify=1000
mailbox=103

extensions.conf:

[general]
static=yes
writeprotect=no

extensions.conf
[globals]
CONSOLE=Console/dsp                             ; Console interface for 
TRUNK=Zap/g1                                    ; Trunk interface
TRUNKX=Zap/g2					; 2nd trunk interface
TRUNKIAX=IAX2/ASTtest1:[email protected]:4569	; IAX trunk interface
TRUNKIAX1=IAX2/ASTtest1:[email protected]:4569	; IAX trunk interface
TRUNKBINFONE=IAX2/xxxxxxxxxxxxxx:[email protected]	; IAX trunk interface
SIPtrunk=SIP/xxxxxxxxxxxxxx:[email protected]	; SIP trunk
TRUNKloop = IAX2/ASTloop:[email protected]:40569	; used for blind monitoring
TRUNKblind = IAX2/ASTblind:[email protected]:41569	; used for testing


[default]

; BE SURE TO CHANGE THIS LINE FOR YOUR IP ADDRESS!
;exten => _192*168*xxx*xxx*.,1,Goto(default,${EXTEN:16},1)
;exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
;exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
; Local blind monitoring

exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)

exten => _192*168*xxx*xxx*8600XXX,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*8600XXX*.,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*78600XXX,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*78600XXX*.,1,Goto(default,${EXTEN:16},1)
exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)


; Example phone extensions

; Extension 2000 Sipura/Linksys ATA line 1
exten => 2000,1,Dial(sip/spa2000,30,to)   ; Ring, 30 secs max
exten => 2000,2,Voicemail,u2000           ; Send to voicemail...
; Extension 2001 Sipura/Linksys ATA line 2
exten => 2001,1,Dial(sip/spa2001,30,to)   ; Ring, 30 secs max
exten => 2001,2,Voicemail,u2001           ; Send to voicemail...
; Extension 2102 rings Grandstream phone
exten => 2102,1,Dial(sip/gs102,30,to)    ; Ring, 30 secs max
exten => 2102,2,Voicemail,u2102          ; Send to voicemail...
; Extension 401 rings the firefly softphone
exten => 401,1,Dial((IAX2/firefly01@firefly01/s||t)
exten => 401,2,Hangup

; extensions for other SIP and IAX call center phones
;   cc100-cc150 SIP Phones
exten => _1[0-5]X,1,Dial(sip/cc${EXTEN},20,to)
;   cc300-cc350 IAX Phones
exten => _3[0-5]X,1,Dial(IAX2/cc${EXTEN},20,to)

; extensions if using a T1 channelbank
exten => _19XX,1,Dial(Zap/${EXTEN:2},30,o)
exten => _19XX,2,Hangup

; Extension 4001 rings Zap phone (this example for FXS on Zap port 1)
exten => 4001,1,Dial(Zap/1,30,o)	; ring Zap device 1
exten => 4001,2,Voicemail,u4001         ; Send to voicemail...


; # timeout invalid rules
exten => #,1,Playback(invalid)              ; "Thanks for trying the demo"
exten => #,2,Hangup                     ; Hang them up.
exten => t,1,Goto(#,1)                  ; If they take too long, give up
exten => i,1,Playback(invalid)          ; "That's not valid, try again"

; Give voicemail at extension 8500
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)

; FastAGI for VICIDIAL/astGUIclient call logging
exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Inbound call from BINFONE
; exten => 1112223333,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => 1112223333,2,Dial(sip/gs102,55,o)
; exten => 1112223333,3,Hangup

; Extension 7275551212 - Inbound local number from PRI with 10 digit delivery
exten => 7275551212,1,Ringing
exten => 7275551212,2,Wait(1)
exten => 7275551212,3,AGI(agi://127.0.0.1:4577/call_log--fullCID--${EXTEN}-----${CALLERID}-----${CALLERIDNUM}-----${CALLERIDNAME})
exten => 7275551212,4,Answer
exten => 7275551212,5,Dial(sip/spa2000&sip/spa2001,30,To)
exten => 7275551212,6,Voicemail,u2000

; dial a long distance outbound number to the UK
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls, 
exten => _901144XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901144XXXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},55,To)
exten => _901144XXXXXXXXXX,3,Hangup

; Germany
exten => _90049.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _90049.,2,Dial(SIP/${EXTEN:1}@SIPtrunk,55,tTo)
exten => _90049.,3,Hangup

; dial a long distance outbound number to Australia
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls, 
exten => _901161XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901161XXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _901161XXXXXXXXX,3,Hangup

; Extensions for performance testing 
exten => _91999NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91999NXXXXXX,2,Dial(${TRUNKloop}/${EXTEN:2},,tTo)
exten => _91999NXXXXXX,3,Hangup
exten => 999999999999,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 999999999999,2,Dial(${TRUNKloop}/${EXTEN:1},,tTo)
exten => 999999999999,3,Hangup

; dial an 800 outbound number
exten => _91800NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91800NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91800NXXXXXX,3,Hangup
exten => _91888NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91888NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91888NXXXXXX,3,Hangup
exten => _91877NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91877NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91877NXXXXXX,3,Hangup
exten => _91866NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91866NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91866NXXXXXX,3,Hangup

; dial a local outbound number (modified because of only LD T1)
exten => _9NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9NXXXXXX,2,Dial(${TRUNK}/1727${EXTEN:1},,To)
exten => _9NXXXXXX,3,Hangup

; dial a local 727 outbound number with area code
exten => _9727NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9727NXXXXXX,2,Dial(${TRUNK}/1${EXTEN:1},,To)
exten => _9727NXXXXXX,3,Hangup

; dial a long distance outbound number
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through BINFONE
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(${TRUNKIAX}/${EXTEN},55,To)
; exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through a SIP provider
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(sip/${EXTEN}@SIPtrunk,55,o)
; exten => _91NXXNXXXXXX,3,Hangup

; parameters for call_inbound.agi (7 fields separated by five dashes "-----"):
; 1. the extension of the phone to ring as defined in the asterisk.phones table
; 2. the phone number that was called, for the live_inbound/_log entry
; 3. a text description of the number that was called in
; 4-7. optional fields, they are also passed as fields in the GUI to web browser
; This is not part of VICIDIAL, it is for astGUIclient agent use only

; Extension 3429 - Inbound 800 number (1-800-555-3429) example of RBS T1
;    with 10 digit ANI and 4 digit DNIS star separated
exten => _**3429,1,Ringing
exten => _**3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _**3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _**3429,4,Answer
exten => _**3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _**3429,6,Voicemail,u2000
; Extension 3429 - with ANI [callerID]
exten => _*NXXNXXXXXX*3429,1,Ringing
exten => _*NXXNXXXXXX*3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _*NXXNXXXXXX*3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _*NXXNXXXXXX*3429,4,Answer
exten => _*NXXNXXXXXX*3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _*NXXNXXXXXX*3429,6,Voicemail,u2000


; parameters for agi-VDAD_ALL_inbound.agi (9 fields separated by five dashes "-----"):
;  1. the method of call handling for the script:
; 	- CID - 	CID received, add record with phone number
; 	- CIDLOOKUP - 	Lookup CID to find record in whole system
; 	- CIDLOOKUPRL -	Restrict lookup to one list
; 	- CIDLOOKUPRC -	Restrict lookup to one campaign's lists
;	- CLOSER -      Closer calls from VICIDIAL fronters
; 	- ANI - 	ANI received, add record with phone number
; 	- ANILOOKUP - 	Lookup ANI to find record in whole system
; 	- ANILOOKUPRL -	Restrict lookup to one list
; 	- 3DIGITID - 	Enter 3 digit code to go to agent
; 	- 4DIGITID - 	Enter 4 digit code to go to agent
; 	- 5DIGITID - 	Enter 5 digit code to go to agent
; 	- 10DIGITID - 	Enter 10 digit code to go to agent
; 2. the method of searching for an available agent:
; 	- LO - Load Balance Overflow only (priority to home server)
; 	- LB - <default> Load Balance total system
; 	- SO - Home server only
; 3. the full name of the IN GROUP to be used in vicidial for the inbound call
; 4. the phone number that was called, for the log entry
; 5. the callerID or lead_id of the person that called(usually overridden)
; 6. the park extension audio file name if used
; 7. the status of the call initially(usually not used)
; 8. the list_id to insert the new lead under if it is new (and CID/ANI available)
; 9. the phone dialing code to insert with the new lead if new (and CID/ANI available)
; 10. the campaign_id to search within lists if CIDLOOKUPRC
; inbound VICIDIAL call with CID delivery through T1 PRI
exten => 1234,1,Answer                  ; Answer the line
exten => 1234,2,AGI(agi-VDAD_ALL_inbound.agi,CID-----LB-----CL_GALLERIA-----7274515134-----Closer-----park----------999-----1)
exten => 1234,3,Hangup

; inbound VICIDIAL transfer calls [can arrive through PRI T1 crossover, IAX or SIP channel]
exten => _90009.,1,Answer                  ; Answer the line
exten => _90009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _90009.,3,Hangup
exten => _990009.,1,Answer                  ; Answer the line
exten => _990009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _990009.,3,Hangup


; barge monitoring extension
exten => 8159,1,ZapBarge
exten => 8159,2,Hangup

; ZapBarge direct channel extensions
exten => _86120XX,1,ZapBarge(${EXTEN:5})


exten => _X48600XXX,1,MeetMeAdmin(${EXTEN:2},T,${EXTEN:0:1})
exten => _X48600XXX,2,Hangup

exten => _X38600XXX,1,MeetMeAdmin(${EXTEN:2},t,${EXTEN:0:1})
exten => _X38600XXX,2,Hangup

exten => _X28600XXX,1,MeetMeAdmin(${EXTEN:2},m,${EXTEN:0:1})
exten => _X28600XXX,2,Hangup

exten => _X18600XXX,1,MeetMeAdmin(${EXTEN:2},M,${EXTEN:0:1})
exten => _X18600XXX,2,Hangup

exten => _55558600XXX,1,MeetMeAdmin(${EXTEN:4},K)
exten => _55558600XXX,2,Hangup
exten => 8300,1,Hangup

; astGUIclient conferences
exten => _86000[0-4]X,1,Meetme,${EXTEN}|q
; VICIDIAL conferences
exten => _86000[5-9]X,1,Meetme,${EXTEN}|F
exten => _86001XX,1,Meetme,${EXTEN}|F
exten => _8600200,1,Meetme,${EXTEN}|F
; quiet entry and leaving conferences for VICIDIAL
exten => _78600XXX,1,Meetme,${EXTEN:1}|Fq
; quiet monitor extensions for meetme rooms (for room managers)
exten => _68600XXX,1,Meetme,${EXTEN:1}|Fmq

; voicelab exten
exten => _86009XX,1,Meetme,${EXTEN}|Fmq
; voicelab exten moderator
exten => _986009XX,1,Meetme,${EXTEN:1}



; park channel for client GUI parking, hangup after 30 minutes
;    create a GSM formatted audio file named "park.gsm" that is 30 minutes long
;    and put it in /var/lib/asterisk/sounds
exten => 8301,1,Answer
exten => 8301,2,AGI(park_CID.agi)
exten => 8301,3,Playback(park)
exten => 8301,4,Hangup 
exten => 8303,1,Answer
exten => 8303,2,AGI(park_CID.agi)
exten => 8303,3,Playback(conf)
exten => 8303,4,Hangup 

; park channel for client GUI conferencing, hangup after 30 minutes
;    create a GSM formatted audio file named "conf.gsm" that is 30 minutes long
;    and put it in /var/lib/asterisk/sounds
exten => 8302,1,Answer
exten => 8302,2,Playback(conf)
exten => 8302,3,Hangup

exten => 8304,1,Answer
exten => 8304,2,Playback(ding)
exten => 8304,3,Hangup

; default audio for safe harbor 2-second-after-hello message then hangup
;    create a GSM formatted audio file complies with safe harbor rules
;    and put it in /var/lib/asterisk/sounds then change filename below
exten => 8307,1,Answer
exten => 8307,2,Playback(vm-goodbye)
exten => 8307,3,Hangup

; this is used for recording conference calls, the client app sends the filename
;    value as a callerID recordings go to /var/spool/asterisk/monitor (WAV)
;    Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8309,1,Answer
exten => 8309,2,Monitor(wav,${CALLERIDNAME})
exten => 8309,3,Wait,3600
exten => 8309,4,Hangup

; this is used for recording conference calls, the client app sends the filename
;    value as a callerID recordings go to /var/spool/asterisk/monitor (GSM)
;    Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8310,1,Answer
exten => 8310,2,Monitor(gsm,${CALLERIDNAME})
exten => 8310,3,Wait,3600
exten => 8310,4,Hangup

; this is used for playing a message to an answering machine forwarded from AMD in VICIDIAL
;    replace conf with the message file you want to leave
exten => 8320,1,WaitForSilence(2000,2) ; AMD got machine.  leave message after recording
exten => 8320,2,Playback(conf)
exten => 8320,3,AGI(VD_amd_post.agi,${EXTEN})
exten => 8320,4,Hangup

; use for selective CallerID hangup by area code(hard-coded)
exten => 8352,1,AGI(agi-VDADselective_CID_hangup.agi,${EXTEN})
exten => 8352,2,Playback(safe_harbor)
exten => 8352,3,Hangup

; prompts for recording AGI script, ID is 4321
; first variable is format (gsm/wav)
; second variable is timeout in milliseconds (default is 720000 [12 minutes])
exten => 8167,1,Answer
exten => 8167,2,AGI(agi-record_prompts.agi,wav-----720000)
exten => 8167,3,Hangup
exten => 8168,1,Answer
exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----720000)
exten => 8168,3,Hangup

; playback of recorded prompts
exten => _851XXXXX,1,Answer
exten => _851XXXXX,2,Playback(${EXTEN})
exten => _851XXXXX,3,Hangup

; this is used to allow the GUI to send you directly into voicemail
;     don't forget to set GUI variable $voicemail_exten to this extension
exten => 8501,1,VoicemailMain(s${CALLERIDNUM})
exten => 8501,2,Hangup

; this is used to allow the GUI to send live calls directly into voicemail
;     don't forget to set GUI variable $voicemail_dump_exten to this extension
exten => _85026666666666.,1,Wait(2)
exten => _85026666666666.,2,Voicemail(${EXTEN:14})
exten => _85026666666666.,3,Hangup

; this is used for sending DTMF signals within conference calls, the client app
;    sends the digits to be played in the callerID field
;    sound files must be placed in /var/lib/asterisk/sounds
exten => 8500998,1,Answer
exten => 8500998,2,Playback(silence)
exten => 8500998,3,AGI(agi-dtmf.agi)
exten => 8500998,4,Hangup

;#### VDAD STANDARD TRANSFER ENTRIES ####
; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
exten => 8364,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8364,2,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,5,Hangup

; VICIDIAL_auto_dialer transfer script:
exten => 8365,1,Playback(sip-silence)
exten => 8365,2,AGI(agi://127.0.0.1:4577/call_log)
exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,5,Hangup

; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
exten => 8366,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8366,2,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
exten => 8367,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8367,2,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balanced:
exten => 8368,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8368,2,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,5,Hangup

; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
exten => 8369,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8369,2,AMD(2000|2000|1000|5000|120|50|4|256) 
exten => 8369,3,AGI(VD_amd.agi,${EXTEN})
exten => 8369,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,7,Hangup

; VICIDIAL auto-dial reminder script
exten => 8372,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8372,2,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,5,Hangup

;#### VDAD SIP UNREGISTERED TRANSFER ENTRIES ####
;#### Use these entries IN PLACE OF the entries above if you are using SIP trunks
;#### and are not registering your provider in sip.conf
;; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
;exten => 8364,1,Playback(sip-silence)
;exten => 8364,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script:
;exten => 8365,1,Playback(sip-silence)
;exten => 8365,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
;exten => 8366,1,Playback(sip-silence)
;exten => 8366,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
;exten => 8367,1,Playback(sip-silence)
;exten => 8367,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balanced:
;exten => 8368,1,Playback(sip-silence)
;exten => 8368,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
;exten => 8369,1,Playback(sip-silence)
;exten => 8369,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8369,3,AMD(2000|2000|1000|5000|120|50|4|256) 
;exten => 8369,4,AGI(VD_amd.agi,${EXTEN})
;exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,7,Hangup
;
;; VICIDIAL auto-dial reminder script
;exten => 8372,1,Playback(sip-silence)
;exten => 8372,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,5,Hangup



; PERFORMANCE TESTING
exten => _999XXXXXX1,1,Answer
exten => _999XXXXXX1,2,Wait(2)
exten => _999XXXXXX1,3,Playback(beep)
exten => _999XXXXXX1,4,Hangup

exten => _999XXXX112,1,Wait(8)
exten => _999XXXX112,2,Answer
exten => _999XXXX112,3,Playback(demo-instruct)
exten => _999XXXX112,4,Playback(demo-instruct)
exten => _999XXXX112,5,Hangup

exten => _999XXXXXX2,1,Wait(8)
exten => _999XXXXXX2,2,Answer
exten => _999XXXXXX2,3,Playback(demo-instruct)
exten => _999XXXXXX2,4,Hangup

exten => _999XXXXXX3,1,SetVar(PRI_CAUSE=1)
exten => _999XXXXXX3,2,Hangup

exten => _999XXXXXX4,1,SetVar(PRI_CAUSE=27)
exten => _999XXXXXX4,2,Hangup

exten => _999XXXXXX5,1,Wait(60)
exten => _999XXXXXX5,2,Hangup

exten => _999XXXXXX6,1,Wait(10)
exten => _999XXXXXX6,2,Answer
exten => _999XXXXXX6,3,Playback(demo-instruct)
exten => _999XXXXXX6,4,Hangup

exten => _999XXXXXX7,1,Wait(12)
exten => _999XXXXXX7,2,Answer
exten => _999XXXXXX7,3,Playback(demo-enterkeywords)
exten => _999XXXXXX7,4,Hangup

exten => _999XXXXXX8,1,SetVar(PRI_CAUSE=17)
exten => _999XXXXXX8,2,Hangup

exten => _999XXXXXX9,1,Wait(6)
exten => _999XXXXXX9,2,Answer
exten => _999XXXXXX9,3,Playback(demo-abouttotry)
exten => _999XXXXXX9,4,Hangup

exten => _999XXXXXX0,1,Wait(5)
exten => _999XXXXXX0,2,Answer
exten => _999XXXXXX0,3,Playback(vm-goodbye)
exten => _999XXXXXX0,4,Hangup

exten => 99999999999,1,Answer
exten => 99999999999,2,Playback(conf)
exten => 99999999999,3,Playback(conf)
exten => 99999999999,4,Playback(conf)
exten => 99999999999,5,Playback(conf)
exten => 99999999999,6,Playback(conf)
exten => 99999999999,7,Playback(conf)
exten => 99999999999,8,Playback(conf)
exten => 99999999999,9,Playback(conf)
exten => 99999999999,10,Playback(conf)
exten => 99999999999,11,Playback(conf)
exten => 99999999999,12,Playback(conf)
exten => 99999999999,13,Playback(conf)
exten => 99999999999,14,Hangup

Kann es sein, dass hier etwas nicht stimmt ?:

; Germany
exten => _90049.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _90049.,2,Dial(SIP/${EXTEN:1}@SIPtrunk,55,tTo)
exten => _90049.,3,Hangup


oder in dieser Einstellung ?:

exten => _192*168*xxx*xxx*8600XXX,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*8600XXX*.,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*78600XXX,1,Goto(default,${EXTEN:16},1)
exten => _192*168*xxx*xxx*78600XXX*.,1,Goto(default,${EXTEN:16},1)
exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)

Vielleicht stimmt ja auch beides nicht so richtig?

Ich bin schon seit Wochen dabei, den Fehler zu finden. Habe auch den Asterisk Kurs gemacht, allerdings komme ich jetzt trotzdem nicht weiter.

Gibt es zwischen den Einstellungen von VicidialNow und Asterisk Unterschiede ?

Bitte helft mir weiter, damit ich endlich den Fehler finde.

Viele Grüße

blacky_2009

 

[blacky_2009]

Hallo Ihr Asterisk-Experten,

wieso bekomme ich keine Antwort ???

Ich habe hier wirklich schon überall nachgeschaut, und komme einfach nicht weiter. Gebt mir doch wenigstens einen Anhaltspunkt, damit ich weiß, wo ich ansetzen kann.

Viele Grüße

blacky_2009