Hallo, Ich habe die FW 5.0 auf der Box. Die Systemseinstellungen habe ich unter der FW 5.0 gespeichert Ich habe 10 MSN, 5 Sieps und ca 10 voip Teilnehmer konfiguriert. Das wiederherstellen der Systemseinstellungen dauert ca 60 Minuten. Die DAS Daten sind zwar eingetragen, funktionieren aber nicht. erst nach eingabe anderer Daten und dann der richtigen Daten funktioniert der DSL Zugang und die Box geht online. Woran jann es liegen ist es normal, das die wiederherstellung so lange dauert. auf der Seriellen konsole wird folgendes ausgegeben: Code: Trying NPE-B...+ Trying NPE-B...success. Using NPE-B with PHY 1. Ethernet eth0: MAC address 00:03:47:df:32:a8 IP: 192.0.2.2/255.255.255.0, Gateway: 192.0.2.1 Default server: 192.0.2.241 RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 2.02 - built 19:09:39, Apr 14 2007 Platform: D-Link Horstbox Backpack (Maxina) (IXP42X 533MHz) BE Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x04000000, [0x00026250-0x03fc1000] available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. == Executing boot script in 3.000 seconds - enter ^C to abort RedBoot> fis load zImage RedBoot> exec Using base address 0x00800000 and length 0x000ced44 Uncompressing Linux.......................................................... done, booting the kernel. Linux version 2.6.16.9 ([email protected]) (gcc version 3.4.6) #2 Wed Nov 14 20:05:48 CET 2007 CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE) Machine: Intel IXDPG425 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists Kernel command line: console=ttyS0,115200n8 console=ttyS0 rootfstype=squashfs root=/dev/mtdblock3 PID hash table entries: 512 (order: 9, 8192 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB = 64MB total Memory: 62988KB available (1564K code, 183K data, 72K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers disabled dmabounce: registered device 0000:00:0c.0 on pci bus dmabounce: registered device 0000:00:0d.0 on pci bus dmabounce: registered device 0000:00:0e.0 on pci bus dmabounce: registered device 0000:00:0e.1 on pci bus dmabounce: registered device 0000:00:0e.2 on pci bus SCSI subsystem initialized TC classifier action (bugs to [EMAIL="[email protected]"][email protected][/EMAIL] cc [EMAIL="[email protected]"][email protected][/EMAIL]) squashfs: version 3.0 (2006/03/15) Phillip Lougher JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank IXP4XX-Flash.0: Found 1 x16 devices at 0x1000000 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000 7 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 7 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00080000 : "RedBoot" 0x00080000-0x000c0000 : "nvram" 0x000c0000-0x001a0000 : "zImage" 0x001c0000-0x00ec0000 : "main-fs" 0x00ec0000-0x00fc0000 : "update-fs" 0x00fc0000-0x00fc1000 : "RedBoot config" 0x00fe0000-0x01000000 : "FIS directory" Creating 2 MTD partitions on "IXP4XX-Flash.0": 0x01000000-0x01800000 : "spare1" 0x01400000-0x02000000 : "spare2" NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered ip_conntrack version 2.4 (512 buckets, 4096 max) - 224 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 72K Mounting /proc /tmp /run /etc /dev/pts /proc/bus/usb mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Copying files to readable /etc directory Loading LED Manager Creating temporary directories ... Mounting /opt Mounting /mnt root: Starting nvramd ... Starting syslogd ... Setting system variables... Loading modules ... ixp400: module license 'unspecified' taints kernel. usbcore: registered new driver usbfs usbcore: registered new driver hub Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. PCI: enabling device 0000:00:0e.2 (0140 -> 0142) ehci_hcd 0000:00:0e.2: EHCI Host Controller ehci_hcd 0000:00:0e.2: controller configured manually ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 23, io mem 0x48002200 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected PCI: enabling device 0000:00:0e.0 (0140 -> 0142) ohci_hcd 0000:00:0e.0: OHCI Host Controller ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0e.0: irq 23, io mem 0x48000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: enabling device 0000:00:0e.1 (0140 -> 0142) ohci_hcd 0000:00:0e.1: OHCI Host Controller ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0e.1: irq 23, io mem 0x48001000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Board reset manager loaded ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.7 ixp400_eth: CPU clock speed (approx) = 527 MHz ixp400_eth: no_ixp400_sw_init != 0, no IXP400 SW core component initialisation performed [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201 ixp400_eth: Found PHY 0 at address 1 ixp400_eth: ixp0 is using NPEB and the PHY at address 1 ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0 Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.2.18 Zaptel Echo Canceller: MG2 PCI: enabling device 0000:00:0c.0 (0140 -> 0143) Registered 0000:00:0c.0 as Master NT PCI: enabling device 0000:00:0d.0 (0140 -> 0143) Registered 0000:00:0d.0 as Slave TE Found chip(0) Si3210 Revision E Found chip(1) Si3210 Revision E Found Si3050 (Rev. D) and Si3019 (Rev. G) Si3050 initialized IXP4xx Watchdog Timer: heartbeat 10 sec u32 classifier Actions configured root: Starting watchdog ... root: Starting board reset daemon root: Configure network ... root: Starting firewall... Setting time ... 1970-01-01 01:00:24.754163 Cannot send command via /var/run/rcmd/server: No such file or directory root: Creating asterisk directories ... chown: /mnt/var/spool/asterisk/moh: Read-only file system Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) killall: asterisk: no process killed Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCRegistered tone zone 29 (Germany) S/ AMI Build-out: 399-533 feet (DSX-1) 9 channels configured. root: Starting asterisk ... root: Setting keys ... nv-upload: set NVRAM variable http.ssl.cert (mhttpd-cert.der). nv-upload: set NVRAM variable http.ssl.key (mhttpd-key.der). nv-upload: set NVRAM variable http.ssl.dhparam (mhttpd-dhparam.der). nv-upload: set NVRAM variable http.ssl.ctx_sid.1 (SSL session [0] context). nv-upload: set NVRAM variable http.ssl.ctx_sid.2 (SSL session [1] context). root: Starting mhttpd ... Unable to open pid file '/var/run/asterisk.pid': Permission denied Jan 1 01:00:28 NOTICE[870]: cdr.c:1193 do_reload: CDR simple logging enabled. Generating RSA Key... Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key' Generating key, this may take a while... Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCj/lyShUwLT2DJ9RuTHPBT1wqZ8gJhqUYyP5+1CtVd8lLa5ZAT3bQEjigcvnV+bQPJqo/Pe9FOeonDPiRSRTtQ+mMD9fzNm9e3kftiQ5fkLZ7I+yyBOgRTJNcI3GdItN6Bf0w6MAZfTWHGkgxsdaXnaoH929T79r+mR1wgG0bKzSD1 Fingerprint: md5 4e:33:96:c3:1b:cc:de:ff:bf:c7:94:e3:15:23:4a:1b nvram: no such variable: ssh.dss_host_key Generating DSS Key... Will output 1024 bit dss secret key to '/etc/dropbear/dropbear_dss_host_key' Generating key, this may take a while... Public key portion is: ssh-dss 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 Fingerprint: md5 12:29:00:91:9d:6d:1a:a8:9f:a9:83:76:66:ac:d6:3b Starting dropbear ... root: Waiting for the master board to come up ... root: Registered gateway mac address 00:17:9a:d9:48:7d Starting rcmdd in configread mode ... Loading configuration from /mnt/HorstBox.cfg ... root: Killing asterisk ... root: Removing asterisk directories ... nvram: no such variable: nvram: no such variable: ÿ Setting DSL parameters ... Setting modulation Killing rcmdd ... Starting rcmdd in configread mode ... Setting up PPPoE LLC 1970-01-01 01:03:19.150391 rcmd: TIMEOUT Setting iptables template rules Saving iptables template rules Saving configuration Setting modulation Killing rcmdd ... Starting rcmdd in configread mode ... Setting up PPPoE LLC 1970-01-01 01:13:12.960270 rcmd: TIMEOUT Setting iptables template rules Saving iptables template rules Saving configuration Setting WLAN parameters ... nvram: no such variable: lan_wlan.switchMode nvram: no such variable: lan_wlan.switchMode Setting DNS parameters ... Setting DynDNS parameter ... Killing rcmdd ... Starting rcmdd in configread mode ... 1970-01-01 01:27:26.580412 rcmd: TIMEOUT Setting up DMZ ... Killing rcmdd ... Starting rcmdd in configread mode ... 1970-01-01 01:27:57.805690 Cannot send command via /var/run/rcmd/server: Connection refused Setting LAN mode (if applicable) ... Setting LAN ip ... Killing rcmdd ... Starting rcmdd in configread mode ... +OK Configuration has been loaded, rebooting ... Hotplug-Script: Clean up ... The system is going down NOW !! Sending SIGTERM to all processes. Exiting Syslogd! Sending SIGKILL to all processes. Requesting system reboot. Restarting system. . + Trying NPE-B...+ Trying NPE-B...success. Using NPE-B with PHY 1. Ethernet eth0: MAC address 00:03:47:df:32:a8 IP: 192.0.2.2/255.255.255.0, Gateway: 192.0.2.1 Default server: 192.0.2.241 RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 2.02 - built 19:09:39, Apr 14 2007 Platform: D-Link Horstbox Backpack (Maxina) (IXP42X 533MHz) BE Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. RAM: 0x00000000-0x04000000, [0x00026250-0x03fc1000] available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. == Executing boot script in 3.000 seconds - enter ^C to abort RedBoot> fis load zImage RedBoot> exec Using base address 0x00800000 and length 0x000ced44 Uncompressing Linux.......................................................... done, booting the kernel. Linux version 2.6.16.9 ([email protected]) (gcc version 3.4.6) #2 Wed Nov 14 20:05:48 CET 2007 CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE) Machine: Intel IXDPG425 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists Kernel command line: console=ttyS0,115200n8 console=ttyS0 rootfstype=squashfs root=/dev/mtdblock3 PID hash table entries: 512 (order: 9, 8192 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB = 64MB total Memory: 62988KB available (1564K code, 183K data, 72K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers disabled dmabounce: registered device 0000:00:0c.0 on pci bus dmabounce: registered device 0000:00:0d.0 on pci bus dmabounce: registered device 0000:00:0e.0 on pci bus dmabounce: registered device 0000:00:0e.1 on pci bus dmabounce: registered device 0000:00:0e.2 on pci bus SCSI subsystem initialized TC classifier action (bugs to [EMAIL="[email protected]"][email protected][/EMAIL] cc [EMAIL="[email protected]"][email protected][/EMAIL]) squashfs: version 3.0 (2006/03/15) Phillip Lougher JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank IXP4XX-Flash.0: Found 1 x16 devices at 0x1000000 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000 7 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 7 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00080000 : "RedBoot" 0x00080000-0x000c0000 : "nvram" 0x000c0000-0x001a0000 : "zImage" 0x001c0000-0x00ec0000 : "main-fs" 0x00ec0000-0x00fc0000 : "update-fs" 0x00fc0000-0x00fc1000 : "RedBoot config" 0x00fe0000-0x01000000 : "FIS directory" Creating 2 MTD partitions on "IXP4XX-Flash.0": 0x01000000-0x01800000 : "spare1" 0x01400000-0x02000000 : "spare2" NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered ip_conntrack version 2.4 (512 buckets, 4096 max) - 224 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 72K Mounting /proc /tmp /run /etc /dev/pts /proc/bus/usb mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Copying files to readable /etc directory Loading LED Manager Creating temporary directories ... Mounting /opt Mounting /mnt root: Starting nvramd ... Starting syslogd ... Setting system variables... Loading modules ... ixp400: module license 'unspecified' taints kernel. usbcore: registered new driver usbfs usbcore: registered new driver hub Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. PCI: enabling device 0000:00:0e.2 (0140 -> 0142) ehci_hcd 0000:00:0e.2: EHCI Host Controller ehci_hcd 0000:00:0e.2: controller configured manually ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 23, io mem 0x48002200 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected PCI: enabling device 0000:00:0e.0 (0140 -> 0142) ohci_hcd 0000:00:0e.0: OHCI Host Controller ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0e.0: irq 23, io mem 0x48000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: enabling device 0000:00:0e.1 (0140 -> 0142) ohci_hcd 0000:00:0e.1: OHCI Host Controller ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0e.1: irq 23, io mem 0x48001000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Board reset manager loaded ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.7 ixp400_eth: CPU clock speed (approx) = 527 MHz ixp400_eth: no_ixp400_sw_init != 0, no IXP400 SW core component initialisation performed [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201 ixp400_eth: Found PHY 0 at address 1 ixp400_eth: ixp0 is using NPEB and the PHY at address 1 ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0 Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.2.18 Zaptel Echo Canceller: MG2 PCI: enabling device 0000:00:0c.0 (0140 -> 0143) Registered 0000:00:0c.0 as Master NT PCI: enabling device 0000:00:0d.0 (0140 -> 0143) Registered 0000:00:0d.0 as Slave TE Found chip(0) Si3210 Revision E Found chip(1) Si3210 Revision E Found Si3050 (Rev. D) and Si3019 (Rev. G) Si3050 initialized IXP4xx Watchdog Timer: heartbeat 10 sec u32 classifier Actions configured root: Starting watchdog ... root: Starting board reset daemon root: Configure network ... root: Starting firewall... Setting time ... 1970-01-01 01:00:25.174168 Cannot send command via /var/run/rcmd/server: No such file or directory root: Creating asterisk directories ... ln: /mnt/var/spool/asterisk/moh/mohmp3: Read-only file system chown: /mnt/var/spool/asterisk/moh: Read-only file system Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) killall: asterisk: no process killed Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCRegistered tone zone 29 (Germany) S/ AMI Build-out: 399-533 feet (DSX-1) 9 channels configured. root: Starting asterisk ... root: Setting keys ... nv-upload: set NVRAM variable http.ssl.cert (mhttpd-cert.der). nv-upload: set NVRAM variable http.ssl.key (mhttpd-key.der). nv-upload: set NVRAM variable http.ssl.dhparam (mhttpd-dhparam.der). nv-upload: set NVRAM variable http.ssl.ctx_sid.1 (SSL session [0] context). nv-upload: set NVRAM variable http.ssl.ctx_sid.2 (SSL session [1] context). root: Starting mhttpd ... Unable to open pid file '/var/run/asterisk.pid': Permission denied Jan 1 01:00:30 NOTICE[892]: cdr.c:1193 do_reload: CDR simple logging enabled. Reading RSA Key... Reading DSS Key... Starting dropbear ... root: Waiting for the master board to come up ... Starting rcmdd in normal mode ... Hotplug-Script: Clean up ... Starting system test ... root: Testing for GCC alignment bug: BUG FOUND root: DSP Version: 0.0 root: DSP Firmware Version: 0.0 root: DSP is not inizialized Starting vsftpd ... System is ready ... root: Starting crond ... root: Starting addons ... Starting maintenance shell ... BusyBox v1.2.1 (2008.01.25-14:32+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. / # Vielen Dank