.titleBar { margin-bottom: 5px!important; }

If possible convert WLAN 7050 german to International English (AnnexB)?

Dieses Thema im Forum "FRITZ!Box tot? Recover, Firmware Up-/ Downgrade" wurde erstellt von vpe, 24 Feb. 2006.

  1. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    #1 vpe, 24 Feb. 2006
    Zuletzt bearbeitet: 24 Feb. 2006
    Is possible to convert FBF WLAN 7050 German version to International English version (Annex B too)?

    I read this http://www.ip-phone-forum.de/showthread.php?t=93808 but i have WLAN 7050 and english firmware not nound on avm ftp :-(

    I need English firmware for WLAN 7050 at all, but on AVM FTP not found!!

    Or is German version FBF 7050 fully functional on Annex B lines in Poland, Czech Republic, etc.?

    Please reply this thread or thread www.ip-phone-forum.de/showthread.php?t=93073 with identical querys. Many thanks for any tips!!!
     
  2. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    none ideas? :-((

    and also:

    I have hardware FRITZ!Box Fon WLAN 7050, Firmware (english) Version 14.03.91 inside, please help with telnet or ssh enabling

    (starttelnet.image not work with this version :-(
     
  3. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hello All!

    Have anyone FBF WLAN7050? Thanx!
     
  4. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    I have a german box.

    Telnet should work. It might be possible to rebrand german/english.
    But there are some internal "problems".

    - HWRevision, firmware_version and language needs to be modified
    - It's not possible with a simple upload file
    - so a special modified image is required.
    - Do not know how Annex A/Annex B will react.

    BR
    Haveaniceday

    PS: Busy during the next days... So not many replies from me..
     
  5. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Thx for reply. I have AnnexB Intl. revision, PN: 20002327.

    Is this HW identical with German version (PN: 20002306)? German ver. have AnnexB too?

    And inversible mod is possible? German 7050 PN:20002306 convert to Intl. AnnexB PN:pN: 20002327? Have anyone experience with this?

    And please, please help me with telnet (on 20002327 or 20002306), i need cmd acces to fbf, many many thx.
     
  6. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    I do not know the product numbers.

    This thread contains the telnet file:

    http://www.ip-phone-forum.de/showthread.php?t=69245
    File: http://www.ip-phone-forum.de/attachment.php?attachmentid=3602&d=1106239999

    The telnet password will be the same password as for your fritzbox web interface.

    You can see from the Major version if a firmware matches.
    Additionally the HWRevision ( gives Annex A/B ) and firmware_version ( avm/avme) and language defines if a firmware is loadable.

    See here for some Major/HWRevision information: http://www.ip-phone-forum.de/showthread.php?p=541836#post541836


    Be _very_ careful with modification. You can easy crash the settings and
    you need to do a "hardcore" recover..

    Haveaniceday
     
  7. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Thanx, i again try this, resume is:

    The firmware update failed:

    No error.


    See picture

    But telnet works, enjoy.

    I have another question, i have experience With Asus WL500 and this have resistent bootcore, have FBF this technology too, or if I crash firmware flash, only JTAG or RS232 is solution?
     

    Anhänge:

  8. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Yes, there is an error within this telnet upload. It reports "error: no error".
    I am too lazy to fix :)

    The firmware has a bootloader so called "adam2".
    The Flash contains several section:
    mtd0 + mtd1 => kernel, filesystem size of the parts differs on different boxes.
    mtd2: adam2 boot manager => can be reached for recovery via IP and managed with partial working ftp commands. No full ftp-protocol !
    mtd3+mtd4=> storage for configuration/environment settings.

    mtd2 destroyed/touched: JTAG requird
    mtd3/mtd4 destroyed/wrong configured: reaction varies, no boot, no web interface, ...

    The configuration is partially mapped to /var/flash/*. ( access is critical ! )

    Do only read: cat /proc/avalanche/env

    Makes sense: save mtd3 + mtd4
    => cat /dev/mtdblock/3 > /var/tmp/mtd3.sav
    + save with tftp to a linux/pc/unix
    Same for mtd4

    Unfortunately I do not know an english written description...

    Haveaniceday
     
  9. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    http://www.ip-phone-forum.de/showthread.php?p=542107#post542107

    thx, backup of mtd3 and mtd4 english and restore in german version be enough?

    Deutsch step-by-steb available? Babelfish translate for me :) Thx.

    Again question - have fritz G729 or not? If you call Sipura and set in fritz compress codec always, sipura announce always G711 :-(
     
  10. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    s cc
     
  11. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    You have to tell us the HWrevision and the Annex.
    I never had an international version to test or see.

    mtd3+mtd4 backup can just be used with the firmware where it belongs to.

    Trouble beside Annex A/B

    mtd3+mtd4 settings: International "provider" avme, + "language" de
    Web interface: /var/html => /usr/www/<avme>/<de>/... all web stuff

    mtd3+mtd4 settings: "provider" avm, language do not care
    Web interface: /var/html => /usr/www/avm/... all web stuff

    The web interface and box does not start proper if /var/html does not point to a regular index.html + web stuff

    Depending on the firmware it only contains one of:
    /usr/www/avm/...
    or
    /usr/www/avme/{de,en}/...

    Also: Annex A Hardware should never be used for Annex B PSTN. The frequency
    interferes.
    Annex B Hardware should work with less quality if set up as Annex A, if the
    DSL-firmware supports.

    For "perfekt" ADSL2+ firmware it will not be possible to have a unique Annex A/B support.

    I do not know which "avme" international software is for annex A and which for annex B.
    I just can tell if I unpack the firmware.

    Haveaniceday
     
  12. geonolis

    geonolis Neuer User

    Registriert seit:
    9 März 2006
    Beiträge:
    11
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Could you provide us with instructions about using tftp ?
    In English or in German or any link to a relevant page?

    Thanks
    [​IMG]
     
  13. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
  14. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    #14 vpe, 15 März 2006
    Zuletzt bearbeitet: 15 März 2006
    And serial console is for what?

    I save flash block and send to you. Please analyze. Is possible implant info EN version German Beta version (and possible roll -back?) ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7050/beta/info.txt ??

    And last question - in Germany PSTN is Annex B or Annex A?
     
  15. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    mtd flash

    mtd flash mtd flashmtd flashmtd flashmtd flashmtd flash

    edit: (Firmware entfernt)
    Es wurde schon so oft gesagt: Für AVM-Firmware nur zu AVM verlinken.
     
  16. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Translation:
    - Firmware removed
    - Often said, AVM firmware just as link to original AVM sites.

    More translated: :idea:
    AVM complains about offering firmware outside their web site.
    Would give also trouble by german laws cause of parts with AVM copyright.

    Haveaniceday
     
  17. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    And last question - in Germany - PSTN is Annex B or Annex A or Annex B only ISDN Lines? Have in germany PSTN Analog lines? Thx.
     
  18. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Yes, PSTN have analog lines. But everybody uses Annex B only, also in combination
    with analog lines.

    Might give less bandwidth or no connection in rare cases, but the provider do
    not care for those connection. They just tell you: No DSL possible in these
    cases.

    Haveaniceday

    PS: I use e.g. an analog line, cause it's cheaper and voip gives a second line..
     
  19. vpe

    vpe Mitglied

    Registriert seit:
    24 Feb. 2006
    Beiträge:
    239
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    OK, FBF Intl version (English version) have Annex B only, this is different only by software.

    I will try german software in my English box (eng updates not avaliable).

    I have question - how (step by step) i flash german firmware (mtdXY block) to my FBF?

    If necessary, i connect serial console (if sw operation progress step-by-step available). JTAG interface do not have (under Windows not available software)
     

    Anhänge:

  20. haveaniceday

    haveaniceday Aktives Mitglied

    Registriert seit:
    14 Okt. 2004
    Beiträge:
    1,305
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    I would wait until a new version is out.
    You have already *.03.91 on your box.

    I never did a migration from avm => avme or avme => avm.
    There are some descriptions around, but I expect they are in german
    and also more for the other way. avm("e"nglish) => avm german.

    Regular you do not need the jtag interface.
    - mtd2: _neeever_ touch, it's the bootloader adam2 ( or you need jtag..)
    Should be the same for all boxes without specific language settings.

    - mtd0 => filesystem
    - mtd1 => kernel ( + see below )
    - mtd3+mtd4 : flash archive for the settings.
    - "mtd6" should be a hidden filesystem, mapped from inside mtd1 (behind kernel)


    I compared the german 03.88 => 04.01 web interface. It might be a too ugly job
    to combine/convert 03.91 englisch / 04.01 german for a proper english version.

    But just ask AVM about an international update for your box.
    They might do this as support.

    Haveaniceday