[INFO] Firmware 5.20F6 für IX78

[der_Gersthofer]

Intertex SurfinBird IX78:
Firmware: 5.20F6 date: 2010-MAY-11

Release notes:

• SIP trunk PBX account password corrected
• emergency number default 112 to vgw-regions file for swedish region
• remote https access corrected
• SIP switch page layout improved
• Spontaneous reboot when SIP uses an invalid TCP connection corrected
• TCP data chunks sent in wrong order or duplicated corrected
• Hide Record-Route setting
• Resolve public GRUU setting
• Use software versions of AES and DES for SSL/TLS applications
• Prioritize "incoming call matching" (SIP trunk) before "static domain forwarding"
• Ignore invalid Replaces header, don't generate parse error
• RIP advertises high "cost" for default route, if no WAN connection
• Wireless was erroneously activated when saving on Network Page

Asus den vorherigen Updates

Firmware: 5.20F5 date: 2010-MAR-29

• Prepared for future upgrades
• Users of 5.20F4 should upgrade!

Firmware: 5.20F4 date: 2010-MAR-18

• TR-069 improvements
• PPP improvements
• Config file storage improved
• ADSL removal through branding on 5-port models corrected
• MOS value format in call log corrected
• Logging expired flows turned off by default
• IX78 stability improved
• TCP stack improved, TCP ACK flood when FIN meet on the wire
• GUI for SIP settings "inhibit hold" and "rfc2543 hold" added
• Checkboxes added for "allow" and "auth" in SIP authorization table
• SIP trunk setting added for hiding record-route
• SIP trunk setting added for showing only one "to" tag
• SIP trunk setting added for hiding Via headers
• Configuration files white space handling improved
• SIP media routing after call transfer corrected
• LAN SIParator detection of inside IP addresses improved
• SIP URI pattern matching improved
• Operator Sting settings improved
• Operator TeliaFiberLAN settings improved

Firmware: 5.20F3 date: 2010-FEB-01

• Wireless mode 802.11b/g default
• Wireless temporary enable using SEL button corrected
• Wireless page save & reboot improved
• Missaligned fields on SIP Trunk page adjusted
• USB device detection improved
• Improved syntax for allowing only specified GUI pages to be shown for certain users
• SIP stability when re-invite client transaction is deleted improved
• TR-069 digest authentication corrected
• Internal SIP UA:s now copies Record-Route to 180 responses
• Improved manipulation capabilities of From header in SIP b2bua
• Bootloader now supports up to 128MB SDRAM

Firmware: 5.20 date: 2009-DEC-28

• SIP Trunking module added - See Configuration > SIP Trunk GUI page
• Interface to management system (iEMS) added
• Call logging with MOS score (call quality) added
• VPN EasyServer improved
• SIParator with ADSL as WAN now configurable
• IP aliases now supported on all network interfaces
• RTSP proxy support for 'destination' parameter
• Possible to set ToS on ftp and other "flow" traffic generated by IX78 itself
• Operator settings extended with more operator choices
• Configuration Scheduler improved
• DHCP server lease time settings added
• ADSL negotiation and performance improved
• HTTPS support for Web GUI access
• IX78 provisioning system improved
• TR-069 improvements (https, more objects, logging)
• IX vendor specific TR-069 extensions, more objects added
• SNMP setting improvements
• IX vendor specific SNMP extensions added
• Upgrade of software licenses (IFC) improved
• Wireless settings reset upon upgrade
• Wireless turned off by default
• Wireless mode 802.11g default (not b/g mixed due to performance drawbacks)
• Wireless MAC address changed to Intertex range
• Wireless WPA2 encryption changed to AES
• Wireless Cafe Mode corrected
• Wireless iPhone and Android compatibility improved
• Changes on wireless settings page now require reboot

SIP Improvements:

• SIP Trunking according to RFC 4904 supported
• SIP generic header manipulation tool using URI header syntax added
• SIP calls with preloaded Route treated as outbound calls in call filtering
• SIP authentication setting added to static domain forwarding table
• SIP self-made GRUU, new option for URI encoding setting
• SIP setting for ignoring required SIP extensions in Require and Proxy-Require header field.
• SIP setting for anonymous call handling when using b2bua
• SIP To header when using b2bua displays forward to URI
• SIP setting for handling of missing Privacy header
• SIP re-invite caused small audio glitch, now fixed
• SIP session licenses allocated for b2bua calls improved
• SIP session licenses counting for parallel ringing fixed
• SIP setting to cancel all branches on 486 busy or user initiated reject added
• SIP authorization/authentication configuration improved
• SIP Refer-To header handling improved
• SIP setting for not changing port number when switching to T.38 fax added
• SIP support for Swedish characters in quoted string
• Multiple authentication challenges for same request now supported
• SIP log options added (methods, internal messages)
• Do not modify SDP if "a=candidate" is present (SIP connect req.)
• Default diffserv bits according to SIP connect and RFC 4594

SIP fixes and corrections:

• SIP authentication when calling anonymously
• SIP DNS SRV redundancy not working
• Calling FENT (Far End NAT Traversal) UA through b2bua not working
• SIP route header was not decrypted if loose route
• Multiple registrations for same account on startup
• SIP, cancel pending re-invite when BYE is received
• Route header not removed in stateless ACK (2xx)
• Remember primary server down for a 401/407 was not working for INVITE
• Media relay was not working if offer is in response and answer in ACK
• Switch to codec type used by other party did not always work
• Re-INVITE for putting on hold disappear and 408 returned
• Hanged SIP TCP connection
• SIP B2BUA pools, use SIP account that is not busy when sharing accounts among many users
• SIP registrations was not deleted properly (memory freed when objects was reused after long time)
• CANCEL server transaction timeout was unnecessarily long
• SIP Contact list in REGISTER response could contain bindings that was for another address-of-record with same username.

Webserver improvements:

• Webserver stability improved
• Increased number of parallel connections
• deadlock caused by config function calls fixed
• upgrade firmware problem fixed

Various improvements and corrections:

• Increased number of parallel connections
• deadlock caused by config function calls fixed
• upgrade firmware problem fixed
• Problem with flash file system reads on startup fixed
• Rare Ethernet driver lock-up removed
• TCP FIN flood when closing TCP connections between IX78s
• Long DNS host names caused buffer overflow in DNS relay
• Ethernet driver blocked in transmit
• PPPoE problem when setting ET4 as WAN
• Easy server sent packets in wrong tunnels when multiple clients
• Remote config by web problem fixed
• Fixed bad noise when no packets received when using G.729
• FXS/FXO voice packet time setting
• FXS sent PCMA when Snom phone sends PCMU
• Resolver DNS servers not being set after PPP link is up
• IP-redirection (using Security-GUI config) did not work for TCP and UDP
• DSA/SHA-1 certificates with SIP/TLS/openssl was not working
• TLS firewall rule not present after first own certificate was deleted.

Please note that there are two different versions of the code.
78A520F6__.tar for networks using ADSL Annex A (normal analog telephone line)
78B520F6__.tar for networks using ADSL Annex B (ISDN telephone line)
Your IX78 hardware must also support the Annex used. (This firmware cannot be used in the IX66, IX67 or IX68)