iptables-Module mit 05er FW / aktuellem Trunk

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Hallo zusammen,

da sich in letzter Zeit mehrfach Forumsteilnehmer mit "fehlenden" iptables-Modulen in ihren Images melden (z.B. hier, hier und hier) würde ich gern wissen, was es damit auf sich hat.
Auch mir ist es z.B. erst nach einigem Basteln gelungen, die Module xt-state, xt-multiport und nf-conntrack-ipv4 auf meine 7270 zu bekommen. nf-conntrack-ipv4 bekam ich nicht via kernel-menuconfig, sondern nur durch Editieren der /make/iptables/config.in nf-conntrack ist überhaupt nicht auf die Box zu bekommen.
Gibt es dort Diskrepanzen in der Menu-Struktur ?
Was macht denn jemand, der für seine Regeln zwingend die o.g. Module benötig ?
Sollte(n) denn tatsächlich die aktuellen FWs in Verbindung mit dem Trunk was die Verwendung persönlicher (bei älterem Kernel funktionierenden) Regeln angeht ein Rückschritt sein ?
Grüße,

JD.
 

sf3978

IPPF-Promi
Mitglied seit
2 Dez 2007
Beiträge
7,847
Punkte für Reaktionen
14
Punkte
38
Was macht denn jemand, der für seine Regeln zwingend die o.g. Module benötig ?
Eine FW benutzen mit der die o. g. Module funktionieren.
Sollte(n) denn tatsächlich die aktuellen FWs in Verbindung mit dem Trunk was die Verwendung persönlicher (bei älterem Kernel funktionierenden) Regeln angeht ein Rückschritt sein ?
Ja. M. E. ist es ein Rückschritt (... aber nicht durch Freetz verursacht) wenn mit einer neuen FW etwas nicht mehr funktioniert, das mit einer älteren FW funktioniert hat.
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Es würde mir ja schon genügen, wenn es mit freetz einen workaround dahingehend geben würde, daß ich bestimmte Module (mit denen meine Regeln funktionieren), ungedenk deren Zusammenspiels mit dem jeweilig aktuellen Kernel, sicher lauffähig in mein Image bekommen könnte, meinetwegen in kernel-menuconfig mit einem entsprechenden Warning.
Also ohne händisches Herumfummeln an /make/iptables/config.in, /make/iptables/standard-modules.in usw.
Wie ich bereits oben beschrieb, konnte ich bis dato nf-conntrack durch keine der oben beschriebenen Handlungen in mein Image bekommen.
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
wenn es mit freetz einen workaround dahingehend geben würde, daß ich bestimmte Module, ungedenk deren Zusammenspiels mit dem jeweilig aktuellen Kernel, sicher lauffähig in mein Image bekommen könnte...
Also ohne händisches Herumfummeln
Der Workaround ist das "händisches Herumfummeln" von dem Du sprichst.
Und "ungedenk deren Zusammenspiels"? Es gibt einfachere Möglichkeiten, die Box zum Absturz zu bringen, als Module zu laden, die nicht zum Kernel passen.

Hast Du denn inzwischen die Module auf die Box gebracht?
Und hat die Box mit diesem Modulen funktioniert, wenn ja, haben auch die iptables Regeln damit funktioniert?
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Hast Du denn inzwischen die Module auf die Box gebracht?
Und hat die Box mit diesem Modulen funktioniert, wenn ja, haben auch die iptables Regeln damit funktioniert?
Wie ich bereits oben schrieb, ist es mir bis dato (auch unter Zuhilfenahme des HErumfummelns) nicht gelungen, nf-connrack auf die Box zu bekommen.
nf-conntrack-ipv4 habe ich ich, wie ich ebenfalls im ersten Post schrieb, auf die Box bekommen, und in Verbindung mit xt-state und xt-multiport lauefn damit meine Regeln mit der 05er FW und Kernel 2.6.32 einwandfrei.
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
Da xt_state udn nf_conntrack_ipv4 abhängig sind von nf_conntrack weiß ich nicht, wie ich Deine Aussage deuten soll.
Wie sehen denn Deine Regeln aus, und was sagt lsmod?
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
lsmod:
Code:
Module                  Size  Used by    Tainted: P  
nf_conntrack_ipv4      10563  4 
nf_defrag_ipv4          1001  1 nf_conntrack_ipv4
xt_iprange              1269  4 
xt_state                1079  4 
xt_tcpudp               2083  2 
xt_multiport            2226 22 
xt_MARK                  687  0 
xt_mark                  687  0 
xt_mac                   764  0 
ipt_REJECT              2127  0 
ipt_LOG                 6284  4 
iptable_filter          1286  1 
ip_tables              11430  1 iptable_filter
x_tables               14590 10 xt_iprange,xt_state,xt_tcpudp,xt_multiport,xt_MARK,xt_mark,xt_mac,ipt_REJECT,ipt_LOG,ip_tables
wlan_scan_ap            7759  1 
wlan_acl                3439  1 
wlan_wep                4327  0 
wlan_tkip               9430  1 
wlan_ccmp               6055  0 
wlan_xauth               601  0 
ath_pci               146970  0 
ath_spectral           93447  1 ath_pci
ath_rate_atheros       59408  1 ath_pci
wlan                  216988  9 wlan_scan_ap,wlan_acl,wlan_wep,wlan_tkip,wlan_ccmp,wlan_xauth,ath_pci,ath_rate_atheros
ath_dfs                39661  3 wlan_scan_ap,ath_pci,wlan
ath_hal               301176  5 ath_pci,ath_spectral,ath_rate_atheros,ath_dfs
avm_ath_extensions     41284  6 wlan_scan_ap,ath_pci,ath_rate_atheros,wlan,ath_dfs,ath_hal
kdsldmod             1015222  4 
dsl_ur8               183779  0 
ramzswap               17338  1 
lzo_compress            1882  1 ramzswap
lzo_decompress          2047  1 ramzswap
capi_codec            411701  0 
isdn_fbox_fon5        762808  5 
pcmlink               336297  2 capi_codec,isdn_fbox_fon5
loop                   13569  2 
jffs2                 104350  1 
Piglet_noemif          42466  0 
led_modul_Fritz_Box_7270plus    62648  2
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Hat denn hier niemand einen Tip für mich, wie ich wenigstens das Modul nf-conntrack wieder "normal", d.h. via kernel-menuconfig und Auswahl in menuconfig wieder funktionierend in mein Image/auf die Box bekomme ?
Grüße,

JD.
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
Es wundert mich immer noch, wieso bei Dir das Modul nf_conntrack_ipv4 ohne nf_conntrack geladen werden kann.

In kernel-menuconfig das Modul nf_conntrack zu aktivieren sollte nicht weiter schwierig sein.
Wenn das Modul aktiviert ist, dann wird es auch erstellt.
Wenn es erstellt ist, kann man es auch von Hand auf die Box bringen, mit etwas Anpassungen auch über menuconfig.
Bist Du so weit gekommen, bzw. wenn nicht, wo war das Problem?

Mit dem Funktionieren ist es dann so eine Sache. Vorher hieß es noch "ungedenk deren Zusammenspiels".
Wenn Du das wie oben beschrieben testest und es funktioniert, dann können wir nf_conntrack auch wieder ins normale menuconfig aufnehmen.
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
In kernel-menuconfig das Modul nf_conntrack zu aktivieren sollte nicht weiter schwierig sein.
Hier mal meine kernel config:
Code:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.21
# Fri Jan 27 23:26:46 2012
#
CONFIG_MIPS=y

#
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
CONFIG_MIPS_UR8=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_MACH_AR7240 is not set
# CONFIG_MACH_AR724x is not set
# CONFIG_MACH_AR933x is not set
# CONFIG_MACH_AR934x is not set
# CONFIG_MACH_AR7100 is not set
# CONFIG_MACH_HORNET is not set
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_MACH_ATHEROS is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y

#
# *** AVM Board PCI Configuration ***
#
CONFIG_AVM_PCI_DEVICE_COUNT=1
CONFIG_AVM_PCI_INT_A=y
# CONFIG_AVM_PCI_INT_B is not set
# CONFIG_AVM_PCI_INT_C is not set
CONFIG_AVM_PCI_REQ_AND_GNT_0=y
# CONFIG_AVM_PCI_REQ_AND_GNT_1 is not set
# CONFIG_AVM_PCI_REQ_AND_GNT_2 is not set
CONFIG_AVM_PCI_DEV1_SLOT=14
CONFIG_AVM_PCI_DEV1_INT=0
CONFIG_MIPS_UR8_C55_MEMORY=0x100
CONFIG_MIPS_UR8_WLAN_MEMORY=0x180
CONFIG_MIPS_UR8_PHY_MEMSTART=0x14000000
CONFIG_DISABLE_OOM_KILLER=y
# CONFIG_UR8_CLOCK_SWITCH is not set
# CONFIG_VLYNQ_SUPPORT is not set
# CONFIG_GPIO_SSI is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
# CONFIG_GENERIC_CMOS_UPDATE is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_FPU_EMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5

#
# CPU selection
#
# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_MIPS_24K is not set
# CONFIG_CPU_MIPS_34K is not set
# CONFIG_CPU_MIPS_74K is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR2=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_HARDWARE_WATCHPOINTS=y

#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_THREAD_SIZE_ORDER=2
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y

#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_AVM_SIMPLE_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y

#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_FREEZER is not set

#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_INIT_IN_MONITOR is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_EP is not set
# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
# CONFIG_PM is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NET_DEV_LOAD is not set

#
# Networking options
#
# CONFIG_AVM_PA is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_MULTICAST_FASTFORWARD=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_GENERIC_CONNTRACK is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CONNTRACK_RTSP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NATTYPE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
# CONFIG_ATH_HW_NAT is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_RTSP is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_WRR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_LLQ=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_CMTP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_AR7240_SPI_FLASH is not set
# CONFIG_MTD_ATH_FLASH is not set
# CONFIG_MTD_AR7100_SPI_FLASH is not set
# CONFIG_MTD_AR9100_PARALLEL_FLASH is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_COMPCACHE=m
# CONFIG_BLK_DEV_VIRTUAL_FAT is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IMQ is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_AVM_CPMAC=y
CONFIG_AVM_CPMAC_NUM_RX_BUFFERS=256
CONFIG_AVM_CPMAC_SWITCH=y
# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE_MPPC=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_AVM_NET_LINK_AUDIO=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_MISDN is not set
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_OSLIB=y
# CONFIG_CAPI_OSLIB_DEBUG is not set
CONFIG_CAPI_CODEC=m
# CONFIG_CAPI_CODEC_SPEEX is not set
CONFIG_CAPI_CODEC_ILBC=y
CONFIG_CAPI_CODEC_G729=y
CONFIG_CAPI_CODEC_G711=y
CONFIG_CAPI_CODEC_G726=y
CONFIG_CAPI_CODEC_G722=y
CONFIG_CAPI_CODEC_VAD=y
CONFIG_CAPI_CODEC_CNG=y
CONFIG_CAPI_CODEC_FAX=y
CONFIG_AVM_DECT=m
# CONFIG_AVM_DECT_DEBUG is not set
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
CONFIG_ISDN_CAPI_ISDN_NT_PCMLINK=m
CONFIG_ISDN_NT_PCMLINK_BLK=m
CONFIG_ISDN_NT_PCMLINK_E1=m
CONFIG_ISDN_NT_PCMLINK_STACK=m
CONFIG_ISDN_NT_PCMLINK_ISDN_AB=m
# CONFIG_ISDN_NT_PCMLINK_DEBUG is not set
# CONFIG_ISDN_NT_PCMLINK_NO_BCHANNEL is not set
# CONFIG_ISDN_NT_PCMLINK_FAX is not set
# CONFIG_ISDN_NT_PCMLINK_COMPRESS is not set
# CONFIG_ISDN_NT_PCMLINK_MODEM is not set
# CONFIG_ISDN_NT_PCMLINK_DTMF is not set
CONFIG_ISDN_NT_PCMLINK_VCTRLS=y
CONFIG_ISDN_NT_PCMLINK_VCTRLS_NUMBER=5
CONFIG_ISDN_NT_PCMLINK_FRITZX=y
# CONFIG_CAPI_EICON is not set
# CONFIG_PHONE is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_AVM_8250=y
CONFIG_SERIAL_AVM_8250_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_TFFS=y
CONFIG_TFFS_ENV=y
# CONFIG_TFFS_CRYPT is not set
CONFIG_TFFS_MTD_DEVICE_0=3
CONFIG_TFFS_MTD_DEVICE_1=4
CONFIG_TFFS_PANIC_LOG=y
CONFIG_TFFS_PANIC_LOG_ID=96
CONFIG_AVM_NET_TRACE=y
CONFIG_AVM_POWER=y
CONFIG_AVM_POWERMETER=y
CONFIG_AVM_DECT_IO=m
CONFIG_AVM_DECT_SYNC=10
CONFIG_AVM_SAMMEL=y
CONFIG_AVM_EVENT=y
# CONFIG_AVM_PUSH_BUTTON is not set
# CONFIG_AVM_PUSH_BUTTON2 is not set
# CONFIG_AVM_PUSH_BUTTON3 is not set
# CONFIG_AVM_PUSH_BUTTON4 is not set
# CONFIG_AVM_PUSH_BUTTON5 is not set
# CONFIG_AVM_AUDIO is not set
CONFIG_AVM_WATCHDOG=y
CONFIG_AVM_LED_EVENTS=m
# CONFIG_AVM_LED is not set
CONFIG_AVM_DEBUG=y
# CONFIG_AVM_LED_OUTPUT_SHIFT_REGISTER is not set
CONFIG_AVM_LED_OUTPUT_GPIO=y
# CONFIG_AVM_LED_OUTPUT_DUAL_GPIO is not set
CONFIG_AVM_FLASH_UPDATE=m
# CONFIG_AVM_PIGLET is not set
CONFIG_AVM_PIGLET_NOEMIF=m
CONFIG_AVM_PIGLET_DECT=y
CONFIG_UBIK2=m
CONFIG_UBIK2_DEVELOPMENT_SUPPORT=0
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_USB_MUSB_AVM_BOARD_UR8_VBUS_NOT_CONNECTED is not set
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_INVENTRA_DMA is not set
CONFIG_USB_TI_CPPI_DMA=y
# CONFIG_USB_MUSB_DEBUG is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AVM_REF_CLOCK=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_VLYNQ=y
# CONFIG_VLYNQ_DEBUG is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_RTL8187SE is not set
# CONFIG_RTL8192SU is not set
# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set

#
# Android
#

#
# Qualcomm MSM Camera And Video
#

#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_DST is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set

#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set

#
# AVM UR8 DSL support
#
CONFIG_UR8_DSL=m
# CONFIG_DSL_AVM_MITSCHNEIDER is not set
# CONFIG_DSL_AVM_DEBUG is not set
CONFIG_MIPS_AVALANCHE_INTC=y
CONFIG_AVALANCHE_INTC_TYPE=y
CONFIG_MIPS_YAMUNA=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_XATTR is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
# CONFIG_JFFS2_LZMA is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINI_FO=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_RUNTIME_DEBUG is not set
CONFIG_BDI_SWITCH=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_UNLZMA is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
Wenn das Modul aktiviert ist, dann wird es auch erstellt.
Den Logs beim make nach zu urteilen in meinem Fall nicht.
Wenn Du das wie oben beschrieben testest und es funktioniert, dann können wir nf_conntrack auch wieder ins normale menuconfig aufnehmen.
Wie ich bereits früher in diesem Thread schrieb, hatte ich mit einem früheren Trunk bereits beide Module - nf-conntrack und nf-conntrack-ipv4 auf der Box, geladen und mit meinen Regeln benutzt.
Dies lief tagelang einwandfrei.
Evtl. verrätst Du mir ja mal, was ich als workaround händisch noch ändern kann.
Zur Vollständigkeit hier noch meine /make/iptables/config.in:
Code:
config FREETZ_PACKAGE_IPTABLES
	bool "Iptables 1.4.11.1 (binary only, unstable)"
	depends on FREETZ_PACKAGE_IPTABLES_IS_SELECTABLE
	default n
	help
		Netfilter/iptables

		Netfilter is the set of hooks within the Linux kernel for intercepting
		and manipulating network packets. The best-known component on top of
		netfilter is the firewall which filters packets, but the hooks are also
		used by a component which performs network address translation, and by
		another which provides ipchains backwards compatibility. These
		components are usually Loadable Kernel Modules.

		iptables is the name of the user space tool by which administrators
		create rules for the packet filtering and NAT modules. While technically
		iptables is merely the tool which controls the packet filtering and NAT
		components within the kernel, the name iptables is often used to refer
		to the entire infrastructure, including netfilter, connection tracking
		and NAT, as well as the tool itself. iptables is a standard part of all
		modern Linux distributions.

config FREETZ_PACKAGE_IPTABLES_IS_SELECTABLE
	bool "Is Iptables selectable for your custom configuration?"	if FREETZ_TYPE_CUSTOM
	default y if \
		!FREETZ_TYPE_SPEEDPORT_W501V && \
		!FREETZ_TYPE_FON_5140
	default n
	help
		Select this if you are sure that Iptables should work on your box

config FREETZ_PACKAGE_IPTABLES_SAVE_RESTORE
	bool "Iptables-save / iptables-restore"
	depends on FREETZ_PACKAGE_IPTABLES
	default n
	help
		iptables-save & iptables-restore

config FREETZ_PACKAGE_IPTABLES_XML
	bool "Iptables-xml"
	depends on FREETZ_PACKAGE_IPTABLES_SAVE_RESTORE
	default n
	help
		Include iptables-xml to convert saved rules to xml.

# Include here for a cleaner menu structure (list packages before modules/libs)
source make/iptables-cgi/Config.in
source make/nhipt/Config.in

source make/iptables/standard-modules.in

comment "CAUTION: Use of module ip_conntrack can lead to spontaneous reboots"
	depends on FREETZ_PACKAGE_IPTABLES && \
		FREETZ_MODULE_ip_conntrack && \
		FREETZ_KERNEL_VERSION_2_6_13

config FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES
	bool "Iptables kernel modules"
	depends on FREETZ_PACKAGE_IPTABLES
	default n
	help
		Linux kernel modules for iptables

		Please note that some kernel modules have corresponding shared libraries
		and vice versa, so please make sure to select both of them, if they are
		needed for your purpose.

menu "Select kernel modules (IPv4)"
	depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES

config FREETZ_MODULE_ip_conntrack
	bool "ip_conntrack.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	default n
	help
		Connection tracking keeps a record of what packets have passed
		through your machine, in order to figure out how they are related
		into connections.

		This is required to do Masquerading or other kinds of Network
		Address Translation (except for Fast NAT). It can also be used to
		enhance packet filtering (see `Connection state match support'
		below).

config FREETZ_MODULE_nf_conntrack
	bool "nf_conntrack.ko"
	#depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	#depends on FREETZ_KERNEL_VERSION_2_6_32
	default n
	help
		Connection tracking keeps a record of what packets have passed
		through your machine, in order to figure out how they are related
		into connections.

		This is required to do Masquerading or other kinds of Network
		Address Translation (except for Fast NAT). It can also be used to
		enhance packet filtering (see `Connection state match support'
		below).

config FREETZ_MODULE_ip_conntrack_ftp
	bool "ip_conntrack_ftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		Tracking FTP connections is problematic: special helpers are
		required for tracking them, and doing masquerading and other forms
		of Network Address Translation on them.

config FREETZ_MODULE_nf_conntrack_ftp
	bool "nf_conntrack_ftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_conntrack
	default n
	help
		Tracking FTP connections is problematic: special helpers are
		required for tracking them, and doing masquerading and other forms
		of Network Address Translation on them.

config FREETZ_MODULE_ip_conntrack_h323
	bool "ip_conntrack_h323.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		H.323 is a VoIP signalling protocol from ITU-T. As one of the most
		important VoIP protocols, it is widely used by voice hardware and
		software including voice gateways, IP phones, Netmeeting, OpenPhone,
		Gnomemeeting, etc.

		With this module you can support H.323 on a connection tracking/NAT
		firewall.

		This module supports RAS, Fast Start, H.245 Tunnelling, Call
		Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat,
		whiteboard, file transfer, etc. For more information, please
		visit http://nath323.sourceforge.net/.

config FREETZ_MODULE_nf_conntrack_h323
	bool "nf_conntrack_h323.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_conntrack
	default n
	help
		H.323 is a VoIP signalling protocol from ITU-T. As one of the most
		important VoIP protocols, it is widely used by voice hardware and
		software including voice gateways, IP phones, Netmeeting, OpenPhone,
		Gnomemeeting, etc.

		With this module you can support H.323 on a connection tracking/NAT
		firewall.

		This module supports RAS, Fast Start, H.245 Tunnelling, Call
		Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat,
		whiteboard, file transfer, etc. For more information, please
		visit http://nath323.sourceforge.net/.

config FREETZ_MODULE_ip_conntrack_irc
	bool "ip_conntrack_irc.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		There is a commonly-used extension to IRC called
		Direct Client-to-Client Protocol (DCC). This enables users to send
		files to each other, and also chat to each other without the need
		of a server. DCC Sending is used anywhere you send files over IRC,
		and DCC Chat is most commonly used by Eggdrop bots. If you are using
		NAT, this extension will enable you to send files and initiate chats.
		Note that you do NOT need this extension to get files or have others
		initiate chats, or everything else in IRC.

config FREETZ_MODULE_nf_conntrack_irc
	bool "nf_conntrack_irc.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_conntrack
	default n
	help
		There is a commonly-used extension to IRC called
		Direct Client-to-Client Protocol (DCC). This enables users to send
		files to each other, and also chat to each other without the need
		of a server. DCC Sending is used anywhere you send files over IRC,
		and DCC Chat is most commonly used by Eggdrop bots. If you are using
		NAT, this extension will enable you to send files and initiate chats.
		Note that you do NOT need this extension to get files or have others
		initiate chats, or everything else in IRC.

config FREETZ_MODULE_nf_conntrack_ipv4
	bool "nf_conntrack_ipv4.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	default n


config FREETZ_MODULE_ip_conntrack_pptp
	bool "ip_conntrack_pptp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		This module adds support for PPTP (Point to Point Tunnelling
		Protocol, RFC2637) connection tracking and NAT.

		If you are running PPTP sessions over a stateful firewall or NAT
		box, you may want to enable this feature.

		Please note that not all PPTP modes of operation are supported yet.
		For more info, read top of the file
		net/ipv4/netfilter/ip_conntrack_pptp.c

config FREETZ_MODULE_nf_conntrack_pptp
	bool "nf_conntrack_pptp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_conntrack
	select FREETZ_MODULE_nf_conntrack_proto_gre
	default n
	help
		This module adds support for PPTP (Point to Point Tunnelling
		Protocol, RFC2637) connection tracking and NAT.

		If you are running PPTP sessions over a stateful firewall or NAT
		box, you may want to enable this feature.

config FREETZ_MODULE_nf_conntrack_proto_gre
	bool "nf_conntrack_proto_gre.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	default n
	help


config FREETZ_MODULE_ip_conntrack_rtsp
	bool "ip_conntrack_rtsp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		Tracking RTSP Connections

config FREETZ_MODULE_ip_conntrack_tftp
	bool "ip_conntrack_tftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		TFTP connection tracking helper, this is required depending
		on how restrictive your ruleset is.
		If you are using a tftp client behind -j SNAT or -j MASQUERADING
		you will need this.

config FREETZ_MODULE_nf_conntrack_tftp
	bool "nf_conntrack_tftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28 || FREETZ_KERNEL_VERSION_2_6_32
	select FREETZ_MODULE_nf_conntrack
	default n
	help
		TFTP connection tracking helper, this is required depending
		on how restrictive your ruleset is.
		If you are using a tftp client behind -j SNAT or -j MASQUERADING
		you will need this.

config FREETZ_MODULE_ip_conntrack_proto_sctp
	bool "ip_conntrack_proto_sctp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		With this option enabled, the connection tracking code will
		be able to do state tracking on SCTP connections.

config FREETZ_MODULE_nf_defrag_ipv4
	bool "nf_defrag_ipv4.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28 || FREETZ_KERNEL_VERSION_2_6_32
	default n

config FREETZ_MODULE_ip_nat
	bool "ip_nat.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		The Full NAT option allows masquerading, port forwarding and other
		forms of full Network Address Port Translation. It is controlled by
		the `nat' table in iptables: see the man page for iptables(8).

config FREETZ_MODULE_nf_nat
	bool
	#bool "nf_nat.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_conntrack
	select FREETZ_MODULE_nf_conntrack_ipv4
	select FREETZ_MODULE_nf_defrag_ipv4
	default n
	help
		The Full NAT option allows masquerading, port forwarding and other
		forms of full Network Address Port Translation. It is controlled by
		the `nat' table in iptables: see the man page for iptables(8).

config FREETZ_MODULE_ip_nat_ftp
	bool "ip_nat_ftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack_ftp
	default n

config FREETZ_MODULE_nf_nat_ftp
	bool "nf_nat_ftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_nat
	select FREETZ_MODULE_nf_conntrack_ftp
	default n

config FREETZ_MODULE_ip_nat_h323
	bool "ip_nat_h323.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack_h323
	default n

config FREETZ_MODULE_nf_nat_h323
	bool
	#bool "nf_nat_h323.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_nat
	select FREETZ_MODULE_nf_conntrack_h323
	default n

config FREETZ_MODULE_ip_nat_irc
	bool "ip_nat_irc.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack_irc if FREETZ_KERNEL_VERSION_2_6_19
	default n

config FREETZ_MODULE_nf_nat_irc
	bool
	#bool "nf_nat_irc.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_nat
	select FREETZ_MODULE_nf_conntrack_irc
	default n

config FREETZ_MODULE_ip_nat_pptp
	bool "ip_nat_pptp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_nat
	select FREETZ_MODULE_ip_conntrack_pptp
	default n

config FREETZ_MODULE_nf_nat_pptp
	bool
	#bool "nf_nat_pptp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_nat
	select FREETZ_MODULE_nf_conntrack_pptp
	default n

config FREETZ_MODULE_ip_nat_rtsp
	bool "ip_nat_rtsp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack_rtsp
	default n

config FREETZ_MODULE_ip_nat_tftp
	bool "ip_nat_tftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_conntrack_tftp if FREETZ_KERNEL_VERSION_2_6_19
	default n

config FREETZ_MODULE_nf_nat_tftp
	bool "nf_nat_tftp.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	select FREETZ_MODULE_nf_nat
	select FREETZ_MODULE_nf_conntrack_tftp
	default n

config FREETZ_MODULE_iptable_filter
	bool "iptable_filter.ko"
	select FREETZ_MODULE_ip_tables
	default n
	help
		Packet filtering defines a table `filter', which has a series of
		rules for simple packet filtering at local input, forwarding and
		local output. See the man page for iptables(8).

config FREETZ_MODULE_iptable_mangle
	bool "iptable_mangle.ko"
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option adds a `mangle' table to iptables: see the man page for
		iptables(8). This table is used for various packet alterations
		which can effect how the packet is routed.

config FREETZ_MODULE_iptable_nat
	bool "iptable_nat.ko"
	select FREETZ_MODULE_ip_conntrack if FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_nf_nat if FREETZ_KERNEL_VERSION_2_6_28
	default n

config FREETZ_MODULE_iptable_raw
	bool "iptable_raw.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MIN
	select FREETZ_MODULE_ip_tables
	default n

config FREETZ_MODULE_ip_tables
	bool "ip_tables.ko"
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN
	default n
	help
		iptables is a general, extensible packet identification framework.
		The packet filtering and full NAT (masquerading, port forwarding,
		etc) subsystems now use this.

config FREETZ_MODULE_ipt_connmark
	bool "ipt_connmark.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option enables support for connection marks, used by the
		`CONNMARK' target and `connmark' match. Similar to the mark value
		of packets, but this mark value is kept in the conntrack session
		instead of the individual packets.

config FREETZ_MODULE_ipt_CONNMARK
	bool "ipt_CONNMARK.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option adds a `CONNMARK' target, which allows one to manipulate
		the connection mark value.  Similar to the MARK target, but
		affects the connection mark value rather than the packet mark value.

config FREETZ_MODULE_ipt_conntrack
	bool "ipt_conntrack.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	select FREETZ_MODULE_ip_tables
	default n

config FREETZ_MODULE_ipt_helper
	bool "ipt_helper.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	select FREETZ_MODULE_ip_tables
	default n
	help
		Helper matching allows you to match packets in dynamic connections
		tracked by a conntrack-helper, ie. ip_conntrack_ftp

config FREETZ_MODULE_ipt_iprange
	bool "ipt_iprange.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This option makes possible to match IP addresses against IP address
		ranges.

config FREETZ_MODULE_ipt_layer7
	bool "ipt_layer7.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		Say Y if you want to be able to classify connections (and their
		packets) based on regular expression matching of their application
		layer data. This is one way to classify applications such as
		peer-to-peer filesharing systems that do not always use the same
		port.

config FREETZ_MODULE_ipt_ipp2p
	bool "ipt_ipp2p.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This option makes possible to match some P2P packets
		therefore helps controlling such traffic.

config FREETZ_MODULE_ipt_length
	bool "ipt_length.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option allows you to match the length of a packet against a
		specific value or range of values.

config FREETZ_MODULE_ipt_limit
	bool "ipt_limit.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		limit matching allows you to control the rate at which a rule can be
		matched: mainly useful in combination with the LOG target ("LOG
		target support", below) and to avoid some Denial of Service attacks.

config FREETZ_MODULE_ipt_LOG
	bool "ipt_LOG.ko"
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_28_MIN
	default n
	help
		This option adds a `LOG' target, which allows you to create rules in
		any iptables table which records the packet header to the syslog.

config FREETZ_MODULE_ipt_comment
	bool "ipt_comment.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option adds a module, which allows you to add comments to your rules.

config FREETZ_MODULE_ipt_mac
	bool "ipt_mac.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		MAC matching allows you to match packets based on the source
		Ethernet address of the packet.

config FREETZ_MODULE_ipt_mark
	bool "ipt_mark.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		Netfilter mark matching allows you to match packets based on the
		`nfmark' value in the packet. This can be set by the MARK target
		(see below).

config FREETZ_MODULE_ipt_MARK
	bool "ipt_MARK.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option adds a `MARK' target, which allows you to create rules
		in the `mangle' table which alter the netfilter mark (nfmark) field
		associated with the packet prior to routing. This can change
		the routing method (see `Use netfilter MARK value as routing
		key') and can also be used by other subsystems to change their
		behavior.

config FREETZ_MODULE_ipt_MASQUERADE
	bool "ipt_MASQUERADE.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		Masquerading is a special case of NAT: all outgoing connections are
		changed to seem to come from a particular interface's address, and
		if the interface goes down, those connections are lost. This is
		only useful for dialup accounts with dynamic IP address (ie. your IP
		address will be different on next dialup).

config FREETZ_MODULE_ipt_multiport
	bool "ipt_multiport.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		Multiport matching allows you to match TCP or UDP packets based on
		a series of source or destination ports: normally a rule can only
		match a single range of ports.

config FREETZ_MODULE_ipt_owner
	bool "ipt_owner.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		Packet owner matching allows you to match locally-generated packets
		based on who created them: the user, group, process or session.

config FREETZ_MODULE_ipt_REDIRECT
	bool "ipt_REDIRECT.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MAX
	select FREETZ_MODULE_iptable_nat
	select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_KERNEL_VERSION_2_6_28
	default n
	help
		REDIRECT is a special case of NAT: all incoming connections are
		mapped onto the incoming interface's address, causing the packets to
		come to the local machine instead of passing through. This is
		useful for transparent proxies.

config FREETZ_MODULE_ipt_REJECT
	bool "ipt_REJECT.ko"
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN
	default n
	help
		The REJECT target allows a filtering rule to specify that an ICMP
		error should be issued in response to an incoming packet, rather
		than silently being dropped.

config FREETZ_MODULE_ipt_state
	bool "ipt_state.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_conntrack
	select FREETZ_MODULE_ip_tables
	default n
	help
		Connection state matching allows you to match packets based on their
		relationship to a tracked connection (ie. previous packets). This
		is a powerful tool for packet classification.

config FREETZ_MODULE_ipt_tcpmss
	bool "ipt_tcpmss.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_ip_tables
	default n
	help
		This option adds a `tcpmss' match, which allows you to examine the
		MSS value of TCP SYN packets, which control the maximum packet size
		for that connection.

config FREETZ_MODULE_ipt_TCPMSS
	bool "ipt_TCPMSS.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This option adds a `TCPMSS' target, which allows you to alter the
		MSS value of TCP SYN packets, to control the maximum size for that
		connection (usually limiting it to your outgoing interface's MTU
		minus 40).

		This is used to overcome criminally braindead ISPs or servers which
		block ICMP Fragmentation Needed packets. The symptoms of this
		problem are that everything works fine from your Linux
		firewall/router, but machines behind it can never exchange large
		packets:
			1) Web browsers connect, then hang with no data received.
			2) Small mail works fine, but large emails hang.
			3) ssh works fine, but scp hangs after initial handshaking.

		Workaround: activate this option and add a rule to your firewall
		configuration like:

			iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
				 -j TCPMSS --clamp-mss-to-pmtu

config FREETZ_MODULE_ipt_tos
	bool "ipt_tos.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		TOS matching allows you to match packets based on the Type Of
		Service fields of the IP packet.

config FREETZ_MODULE_ipt_TOS
	bool "ipt_TOS.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19_MAX
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This option adds a `TOS' target, which allows you to create rules in
		the `mangle' table which alter the Type Of Service field of an IP
		packet prior to routing.

config FREETZ_MODULE_ipt_ttl
	bool "ipt_ttl.ko"
	select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13
	select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN
	default n
	help
		This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
		to match packets by their TTL value.
# FIXME
config FREETZ_MODULE_ipt_TTL
	bool "ipt_TTL.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	default n

endmenu

menu "x_tables (both IPv4 and IPv6)"
	depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES
	depends on FREETZ_KERNEL_VERSION_2_6_19_MIN

config FREETZ_MODULE_x_tables
	bool "x_tables.ko"
	default n

config FREETZ_MODULE_xt_helper
	bool "xt_helper.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		Helper matching allows you to match packets in dynamic connections
		tracked by a conntrack-helper, ie. ip_conntrack_ftp

config FREETZ_MODULE_xt_CLASSIFY
	bool "xt_CLASSIFY.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `CLASSIFY' target, which enables the user to set
		the priority of a packet. Some qdiscs can use this value for
		classification, among these are:

		atm, cbq, dsmark, pfifo_fast, htb, prio

config FREETZ_MODULE_xt_comment
	bool "xt_comment.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `comment' dummy-match, which allows you to put
		comments in your iptables ruleset.

config FREETZ_MODULE_xt_conntrack
	bool "xt_conntrack.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		Connection tracking keeps a record of what packets have passed
		through your machine, in order to figure out how they are related
		into connections.

		Layer 3 independent connection tracking is experimental scheme
		which generalize ip_conntrack to support other layer 3 protocols.

config FREETZ_MODULE_xt_esp
	bool "xt_esp.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This match extension allows you to match a range of SPIs
		inside ESP header of IPSec packets.

config FREETZ_MODULE_xt_length
	bool "xt_length.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option allows you to match the length of a packet against a
		specific value or range of values.

config FREETZ_MODULE_xt_limit
	bool "xt_limit.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		limit matching allows you to control the rate at which a rule can be
		matched: mainly useful in combination with the LOG target ("LOG
		target support", below) and to avoid some Denial of Service attacks.

config FREETZ_MODULE_xt_mac
	bool "xt_mac.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		MAC matching allows you to match packets based on the source
		Ethernet address of the packet.

config FREETZ_MODULE_xt_multiport
	bool "xt_multiport.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		Multiport matching allows you to match TCP or UDP packets based on
		a series of source or destination ports: normally a rule can only
		match a single range of ports.

config FREETZ_MODULE_xt_mark
	bool "xt_mark.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		Netfilter mark matching allows you to match packets based on the
		`nfmark' value in the packet. This can be set by the MARK target
		(see below).

config FREETZ_MODULE_xt_MARK
	bool "xt_MARK.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `MARK' target, which allows you to create rules
		in the `mangle' table which alter the netfilter mark (nfmark) field
		associated with the packet prior to routing. This can change
		the routing method (see `Use netfilter MARK value as routing
		key') and can also be used by other subsystems to change their
		behavior.

config FREETZ_MODULE_xt_NFQUEUE
	bool "xt_NFQUEUE.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This target replaced the old obsolete QUEUE target.

		As opposed to QUEUE, it supports 65535 different queues,
		not just one.

config FREETZ_MODULE_xt_NOTRACK
	bool "xt_NOTRACK.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		The NOTRACK target allows a select rule to specify
		which packets *not* to enter the conntrack/NAT
		subsystem with all the consequences (no ICMP error tracking,
		no protocol helpers for the selected packets).

config FREETZ_MODULE_xt_iprange
	bool "xt_iprange.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a "iprange" match, which allows you to match
		based on an IP address range. (Normal iptables only matches on
		single addresses x with an optional mask.)

config FREETZ_MODULE_xt_pkttype
	bool "xt_pkttype.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		Packet type matching allows you to match a packet by
		its "class", eg. BROADCAST, MULTICAST, ...

		Typical usage:
			iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG

config FREETZ_MODULE_xt_physdev
	bool "xt_physdev.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		Physdev packet matching matches against the physical bridge ports
		the IP packet arrived on or will leave by.

config FREETZ_MODULE_xt_quota
	bool "xt_quota.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `quota' match, which allows to match on a
		byte counter.

config FREETZ_MODULE_xt_realm
	bool "xt_realm.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `realm' match, which allows you to use the realm
		key from the routing subsystem inside iptables.

		This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option
		in tc world.

config FREETZ_MODULE_xt_state
	bool "xt_state.ko"
	#depends on FREETZ_KERNEL_VERSION_2_6_19
	select FREETZ_MODULE_x_tables
	select FREETZ_MODULE_ip_conntrack
	default n
	help
		Connection state matching allows you to match packets based on their
		relationship to a tracked connection (ie. previous packets). This
		is a powerful tool for packet classification.

config FREETZ_MODULE_xt_statistic
	bool "xt_statistic.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `statistic' match, which allows you to match
		on packets periodically or randomly with a given percentage.

config FREETZ_MODULE_xt_string
	bool "xt_string.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `string' match, which allows you to look for
		pattern matchings in packets.

config FREETZ_MODULE_xt_tcpudp
	bool "xt_tcpudp.ko"
	select FREETZ_MODULE_x_tables
	default n

config FREETZ_MODULE_xt_tcpmss
	bool "xt_tcpmss.ko"
	select FREETZ_MODULE_x_tables
	default n
	help
		This option adds a `tcpmss' match, which allows you to examine the
		MSS value of TCP SYN packets, which control the maximum packet size
		for that connection.
endmenu

menu "Select kernel modules (IPv6)"
	depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES
	depends on FREETZ_TARGET_IPV6_SUPPORT

config FREETZ_MODULE_ip6_queue
	bool "ip6_queue.ko"
	default n
	help
		Userspace queueing via NETLINK

		This option adds a queue handler to the kernel for IPv6
		packets which lets us to receive the filtered packets
		with QUEUE target using libiptc as we can do with
		the IPv4 now.

		(C) Fernando Anton 2001
		IPv64 Project - Work based in IPv64 draft by Arturo Azcorra.
		Universidad Carlos III de Madrid
		Universidad Politecnica de Alcala de Henares
		email: <[email protected]>.

config FREETZ_MODULE_ip6_tables
	select FREETZ_PACKAGE_IPTABLES_SHARED_LIBS
	select FREETZ_LIB_libxt_standard
	bool "ip6_tables.ko"
	default n
	help
		IP6 tables support (required for filtering/masq/NAT)

		ip6tables is a general, extensible packet identification framework.
		Currently only the packet filtering and packet mangling subsystem
		for IPv6 use this, but connection tracking is going to follow.

config FREETZ_MODULE_ip6table_filter
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6table_filter.ko"
	default n
	help
		Packet filtering

		Packet filtering defines a table `filter', which has a series of
		rules for simple packet filtering at local input, forwarding and
		local output. See the man page for iptables(8).

config FREETZ_MODULE_ip6table_raw
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6table_raw.ko"
	default n
	help
		raw table support (required for TRACE)

		This option adds a `raw' table to ip6tables. This table is the very
		first in the netfilter framework and hooks in at the PREROUTING
		and OUTPUT chains.

config FREETZ_MODULE_ip6t_ah
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_ah.ko"
	default n
	help
		AH match support

		This module allows one to match AH and ESP packets.

config FREETZ_MODULE_ip6t_dst
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_dst.ko"
	default n
	help
		Dst opts header match support

		This allows one to match packets based on the hop-by-hop
		and destination options headers of a packet.

config FREETZ_MODULE_ip6t_esp
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_esp.ko"
	default n
	help
		ESP match support

		This module allows one to match AH and ESP packets.

config FREETZ_MODULE_ip6t_eui64
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_eui64.ko"
	default n
	help
		EUI64 address check

		This module performs checking on the IPv6 source address
		Compares the last 64 bits with the EUI64 (delivered
		from the MAC address) address

config FREETZ_MODULE_ip6t_frag
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_frag.ko"
	default n
	help
		Fragmentation header match support

		frag matching allows you to match packets based on the fragmentation
		header of the packet.

config FREETZ_MODULE_ip6t_hbh
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_hbh.ko"
	default n
	help
		Hop-by-hop and header match support

		This allows one to match packets based on the hop-by-hop
		and destination options headers of a packet.

config FREETZ_MODULE_ip6t_hl
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_hl.ko"
	default n
	help
		HL match support

		HL matching allows you to match packets based on the hop
		limit of the packet.

config FREETZ_MODULE_ip6t_ipv6header
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_ipv6header.ko"
	default n
	help
		IPv6 Extension Headers Match

		This module allows one to match packets based upon
		the ipv6 extension headers.

config FREETZ_MODULE_ip6t_length
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_length.ko"
	default n
	help
		Packet Length match support

		This option allows you to match the length of a packet against a
		specific value or range of values.

config FREETZ_MODULE_ip6t_limit
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_limit.ko"
	default n
	help
		limit match support

		limit matching allows you to control the rate at which a rule can be
		matched: mainly useful in combination with the LOG target ("LOG
		target support", below) and to avoid some Denial of Service attacks.

config FREETZ_MODULE_ip6t_LOG
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_LOG.ko"
	default n
	help
		LOG target support

		This option adds a `LOG' target, which allows you to create rules in
		any iptables table which records the packet header to the syslog.

config FREETZ_MODULE_ip6t_mac
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_mac.ko"
	default n
	help
		MAC address match support

		mac matching allows you to match packets based on the source
		Ethernet address of the packet.

config FREETZ_MODULE_ip6t_mark
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_mark.ko"
	default n
	help
		netfilter MARK match support

		Netfilter mark matching allows you to match packets based on the
		`nfmark' value in the packet. This can be set by the MARK target
		(see below).

config FREETZ_MODULE_ip6t_multiport
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_multiport.ko"
	default n
	help
		Multiple port match support

		Multiport matching allows you to match TCP or UDP packets based on
		a series of source or destination ports: normally a rule can only
		match a single range of ports.

config FREETZ_MODULE_ip6t_owner
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_owner.ko"
	default n
	help
		Owner match support

		Packet owner matching allows you to match locally-generated packets
		based on who created them: the user, group, process or session.

config FREETZ_MODULE_ip6t_REJECT
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_REJECT.ko"
	default n
	help
		The REJECT target allows a filtering rule to specify that an ICMPv6
		error should be issued in response to an incoming packet, rather
		than silently being dropped.

config FREETZ_MODULE_ip6t_rt
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6t_rt.ko"
	default n
	help
		Routing header match support

		rt matching allows you to match packets based on the routing
		header of the packet.

config FREETZ_MODULE_ip6table_mangle
	depends on FREETZ_MODULE_ip6_tables
	bool "ip6table_mangle.ko"
	default n
	help
		Packet mangling

		This option adds a `mangle' table to iptables: see the man page for
		iptables(8). This table is used for various packet alterations
		which can effect how the packet is routed.

config FREETZ_MODULE_ip6t_MARK
	depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables
	bool "ip6t_MARK.ko"
	default n
	help
		MARK target support

		This option adds a `MARK' target, which allows you to create rules
		in the `mangle' table which alter the netfilter mark (nfmark) field
		associated with the packet packet prior to routing. This can change
		the routing method (see `Use netfilter MARK value as routing
		key') and can also be used by other subsystems to change their
		behavior.

config FREETZ_MODULE_nf_conntrack_ipv6
	bool
	#bool "nf_conntrack_ipv6.ko"
	depends on FREETZ_KERNEL_VERSION_2_6_28_MIN
	default n
	help
		Connection tracking keeps a record of what packets have passed
		through your machine, in order to figure out how they are related
		into connections.

		This is IPv6 support on Layer 3 independent connection tracking.
		Layer 3 independent connection tracking is experimental scheme which
		generalize ip_conntrack to support other layer 3 protocols.

endmenu

config FREETZ_PACKAGE_IPTABLES_SHARED_LIBS
	bool "Iptables shared libraries"
	depends on FREETZ_PACKAGE_IPTABLES
	default n
	help
		Shared Libraries for iptables

		Please note that some kernel modules have corresponding shared libraries
		and vice versa, so please make sure to select both of them, if they are
		needed for your purpose.

menu "Select shared libraries (IPv4)"
	depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS

config FREETZ_LIB_libipt_addrtype
	bool "libipt_addrtype.so"
	default n
	help
		This module matches packets based on their address type.
		Address types are used within the kernel networking stack and categorize
		addresses into various groups. The exact definition of that group
		depends on the specific layer three protocol.
		Examples: UNICAST, BROADCAST, LOCAL, MULTICAST, ANYCAST, ...

config FREETZ_LIB_libipt_ah
	bool "libipt_ah.so"
	default n
	help
		This module matches the SPIs in Authentication header of IPsec packets.

config FREETZ_LIB_libipt_CLUSTERIP
	bool "lipipt_CLUSTERIP.so"
	default n
	help
		This module allows you to configure a simple cluster of nodes that
		share a certain IP and MAC address without an explicit load balancer
		in front of them. Connections are statically distributed between the
		nodes in this cluster.

config FREETZ_LIB_libipt_DNAT
	bool "libipt_DNAT.so"
	default n
	help
		This target is only valid in the nat table, in the PREROUTING
		and OUTPUT chains, and user-defined chains which are only called from
		those chains. It specifies that the destination address of the packet
		should be modified (and all future packets in this connection will
		also be mangled), and rules should cease being examined.

config FREETZ_LIB_libipt_ecn
	bool "libipt_ecn.so"
	default n
	help
		This allows you to match the ECN bits of the IPv4 and TCP header.
		ECN is the Explicit Congestion Notification mechanism as specified in
		RFC3168.

config FREETZ_LIB_libipt_ECN
	bool "libipt_ECN.so"
	default n
	help
		This target allows to selectively work around known ECN blackholes.
		It can only be used in the mangle table.

config FREETZ_LIB_libipt_icmp
	bool "libipt_icmp.so"
	default n
	help
		This extension can be used if `--protocol icmp' is specified.

config FREETZ_LIB_libipt_ipp2p
	bool "libipt_ipp2p.so"
	depends on FREETZ_MODULE_ipt_ipp2p
	default n
	help
		This extension can be used to match p2p protocols such as
		eDonkey, KaZaA, Gnutella, BitTorrent.

config FREETZ_LIB_libipt_LOG
	bool "libipt_LOG.so"
	default n
	help
		Turn on kernel logging of matching packets. When this option is set
		for a rule, the Linux kernel will print some information on all
		matching packets (like most IP header fields) via the kernel log
		(where it can be read with dmesg or syslogd (8)).

config FREETZ_LIB_libipt_MASQUERADE
	bool "libipt_MASQUERADE.so"
	default n
	help
		This target is only valid in the nat table, in the POSTROUTING
		chain. It should only be used with dynamically assigned IP (dialup)
		connections: if you have a static IP address, you should use the SNAT
		target.

config FREETZ_LIB_libipt_MIRROR
	bool "libipt_MIRROR.so"
	default n
	help
		This is an experimental demonstration target which inverts the source
		and destination fields in the IP header and retransmits the packet.

config FREETZ_LIB_libipt_NETMAP
	bool "libipt_NETMAP.so"
	default n
	help
		This target allows you to statically map a whole network of addresses onto
		another network of addresses.

config FREETZ_LIB_libipt_realm
	bool "libipt_realm.so"
	select FREETZ_MODULE_xt_realm if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This matches the routing realm. Routing realms are used in complex
		routing setups involving dynamic routing protocols like BGP.

config FREETZ_LIB_libipt_REDIRECT
	bool "libipt_REDIRECT.so"
	default n
	help
		This target redirects the packet to the machine itself by changing the
		destination IP to the primary address of the incoming interface
		(locally-generated packets are mapped to the 127.0.0.1 address).

config FREETZ_LIB_libipt_REJECT
	bool "libipt_REJECT.so"
	default n
	help
		This is used to send back an error packet in response to the matched
		packet: otherwise it is equivalent to DROP
		so it is a terminating TARGET, ending rule traversal.

config FREETZ_LIB_libipt_SAME
	bool "libipt_SAME.so"
	default n
	help
		Similar to SNAT/DNAT depending on chain: it takes a range of addresses
		(`--to 1.2.3.4-1.2.3.7') and gives a client the same
		source-/destination-address for each connection.

config FREETZ_LIB_libipt_SNAT
	bool "libipt_SNAT.so"
	default n
	help
		This target specifies that the source address of the packet should be
		modified (and all future packets in this connection will also be
		mangled), and rules should cease being examined.

config FREETZ_LIB_libipt_ttl
	bool "libipt_ttl.so"
	default n
	help
		This module matches the time to live field in the IP header.

config FREETZ_LIB_libipt_TTL
	bool "libipt_TTL.so"
	default n
	help
		This is used to modify the IPv4 TTL header field. The TTL field
		determines how many hops (routers) a packet can traverse until it's
		time to live is exceeded.

config FREETZ_LIB_libipt_ULOG
	bool "libipt_ULOG.so"
	default n
	help
		This target provides userspace logging of matching packets. When this
		target is set for a rule, the Linux kernel will multicast this packet
		through a netlink socket. One or more userspace processes may then
		subscribe to various multicast groups and receive the packets.

config FREETZ_LIB_libipt_unclean
	bool "libipt_unclean.so"
	default n
	help
		This module takes no options, but attempts to match packets which seem
		malformed or unusual. This is regarded as experimental.
endmenu

menu "Select shared libraries (both IPv4 and IPv6)"
	depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS

config FREETZ_LIB_libxt_CLASSIFY
	bool "libxt_CLASSIFY.so"
	default n
	help
		This module allows you to set the skb->priority value (and thus
		classify the packet into a specific CBQ class).

config FREETZ_LIB_libxt_comment
	bool "libxt_comment.so"
	select FREETZ_MODULE_xt_comment if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		Allows you to add comments (up to 256 characters) to any rule.

config FREETZ_LIB_libxt_connbytes
	bool "libxt_connbytes.so"
	default n
	help
		Match by how many bytes or packets a connection (or one of the two
		flows constituting the connection) has transferred so far, or by
		average bytes per packet.

#config FREETZ_LIB_libxt_connlimit
#	bool "libxt_connlimit.so"
#	default n
#	help
#		Allows you to restrict the number of parallel connections to a server
#		per client IP address (or client address block).

config FREETZ_LIB_libxt_connmark
	bool "libxt_connmark.so"
	default n
	help
		This module matches the netfilter mark field associated with a
		connection (which can be set using the CONNMARK target below).

config FREETZ_LIB_libxt_CONNMARK
	bool "libxt_CONNMARK.so"
	default n
	help
		This module sets the netfilter mark value associated with a connection.

config FREETZ_LIB_libxt_CONNSECMARK
	bool "libxt_CONNSECMARK.so"
	default n
	help
		This module copies security markings from packets to connections
		(if unlabeled), and from connections back to packets (also only
		if unlabeled). Typically used in conjunction with SECMARK, it is
		only valid in the mangle table.

config FREETZ_LIB_libxt_conntrack
	bool "libxt_conntrack.so"
	select FREETZ_MODULE_xt_conntrack if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module, when combined with connection tracking, allows access to
		the	connection tracking state for this packet/connection.

config FREETZ_LIB_libxt_dscp
	bool "libxt_dscp.so"
	default n
	help
		This module matches the 6 bit DSCP field within the TOS field in the
		IP header. DSCP has superseded TOS within the IETF.

config FREETZ_LIB_libxt_DSCP
	bool "libxt_DSCP.so"
	default n
	help
		This target allows to alter the value of the DSCP bits within the TOS
		header of the IPv4 packet. As this manipulates a packet, it can only
		be used in the mangle table.

config FREETZ_LIB_libxt_esp
	bool "libxt_esp.so"
	default n
	help
		This module matches the SPIs in ESP header of IPsec packets.

config FREETZ_LIB_libxt_hashlimit
	bool "libxt_hashlimit.so"
	default n
	help
		hashlimit uses hash buckets to express a rate limiting match (like the
		limit match) for a group of connections using a single iptables
		rule.

config FREETZ_LIB_libxt_helper
	bool "libxt_helper.so"
	select FREETZ_MODULE_xt_helper if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches packets related to a specific conntrack-helper.

config FREETZ_LIB_libxt_iprange
	bool "libxt_iprange.so"
	default n
	help
		This matches on a given arbitrary range of IP addresses.

config FREETZ_LIB_libxt_length
	bool "libxt_length.so"
	select FREETZ_MODULE_xt_length if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches the length of the layer-3 payload (e.g. layer-4
		packet) of a packet against a specific value or range of values.

config FREETZ_LIB_libxt_limit
	bool "libxt_limit.so"
	select FREETZ_MODULE_xt_limit if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches at a limited rate using a token bucket filter.
		A rule using this extension will match until this limit is reached
		(unless the `!' flag is used). It can be used in combination with the
		LOG target to give limited logging, for example.

config FREETZ_LIB_libxt_mac
	bool "libxt_mac.so"
	select FREETZ_MODULE_xt_mac if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		Match source MAC address.

config FREETZ_LIB_libxt_mark
	bool "libxt_mark.so"
	select FREETZ_MODULE_xt_mark if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches the netfilter mark field associated with a packet
		(which can be set using the MARK target below).

config FREETZ_LIB_libxt_MARK
	bool "libxt_MARK.so"
	select FREETZ_MODULE_xt_MARK if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This target is used to set the Netfilter mark value associated with
		the packet. The target can only be used in the mangle table. It can,
		for example, be used in conjunction with routing based on fwmark
		(needs iproute2).

config FREETZ_LIB_libxt_multiport
	bool "libxt_multiport.so"
	select FREETZ_MODULE_xt_multiport if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches a set of source or destination ports. Up to 15
		ports can be specified. A port range (port:port) counts as two
		ports.

config FREETZ_LIB_libxt_NFLOG
	bool "libxt_NFLOG.so"
	default n
	help
		This target provides logging of matching packets. When this target is
		set for a rule, the Linux kernel will pass the packet to the loaded
		logging backend to log the packet.

config FREETZ_LIB_libxt_NFQUEUE
	bool "libxt_NFQUEUE.so"
	default n
	help
		This target is an extension of the QUEUE target. As opposed to QUEUE,
		it allows you to put a packet into any specific queue, identified by
		its 16-bit queue number.

config FREETZ_LIB_libxt_NOTRACK
	bool "libxt_NOTRACK.so"
	default n
	help
		This target disables connection tracking for all packets matching
		that rule.

config FREETZ_LIB_libxt_owner
	bool "libxt_owner.so"
	default n
	help
		This module attempts to match various characteristics of the packet
		creator, for locally generated packets.

config FREETZ_LIB_libxt_physdev
	bool "libxt_physdev.so"
	select FREETZ_MODULE_xt_physdev if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches on the bridge port input and output devices
		enslaved to a bridge device.

config FREETZ_LIB_libxt_pkttype
	bool "libxt_pkttype.so"
	select FREETZ_MODULE_xt_pkttype if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module matches the link-layer packet type.

config FREETZ_LIB_libxt_quota
	bool "libxt_quota.so"
	default n
	help
		Implements network quotas by decrementing a byte counter with each
		packet.

config FREETZ_LIB_libxt_rateest
	bool "libxt_rateest.so"
	default n

config FREETZ_LIB_libxt_RATEEST
	bool "libxt_RATEEST.so"
	default n
	help
		The RATEEST target collects statistics, performs rate estimation
		calculation and saves the results for later evaluation using the
		rateest match.

config FREETZ_LIB_libxt_sctp
	bool "libxt_sctp.so"
	default n

config FREETZ_LIB_libxt_SECMARK
	bool "libxt_SECMARK.so"
	default n
	help
		This is used to set the security mark value associated with the
		packet for use by security subsystems such as SELinux.

config FREETZ_LIB_libxt_standard
	bool "libxt_standard.so"
	default n

config FREETZ_LIB_libxt_state
	bool "libxt_state.so"
	select FREETZ_MODULE_xt_state if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This module, when combined with connection tracking, allows access to
		the connection tracking state for this packet.

config FREETZ_LIB_libxt_statistic
	bool "libxt_statistic.so"
	default n
	help
		This module matches packets based on some statistic condition.

config FREETZ_LIB_libxt_string
	bool "libxt_string.so"
	select FREETZ_MODULE_xt_string if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This modules matches a given string by using some pattern matching
		strategy.

config FREETZ_LIB_libxt_tcpmss
	bool "libxt_tcpmss.so"
	select FREETZ_MODULE_xt_tcpmss if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		This matches the TCP MSS (maximum segment size) field of the TCP header.

config FREETZ_LIB_libxt_TCPMSS
	bool "libxt_TCPMSS.so"
	default n
	help
		This target allows to alter the MSS value of TCP SYN packets, to control
		the maximum size for that connection (usually limiting it to your
		outgoing interface's MTU minus 40 for IPv4 or 60 for IPv6,
		respectively).

config FREETZ_LIB_libxt_tcp
	bool "libxt_tcp.so"
	select FREETZ_MODULE_xt_tcpudp if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		These extensions can be used if `--protocol tcp' is specified.

config FREETZ_LIB_libxt_time
	bool "libxt_time.so"
	default n
	help
		This matches if the packet arrival time/date is within a given range.

config FREETZ_LIB_libxt_tos
	bool "libxt_tos.so"
	default n
	help
		This module matches the 8-bit Type of Service field in the IPv4 header
		(i.e. including the "Precedence" bits) or the (also 8-bit) Priority
		field in the IPv6 header.

config FREETZ_LIB_libxt_TOS
	bool "libxt_TOS.so"
	default n
	help
		This module sets the Type of Service field in the IPv4 header
		(including the 'precedence' bits) or the Priority field in the IPv6
		header.

config FREETZ_LIB_libxt_TRACE
	bool "libxt_TRACE.so"
	default n
	help
		This target marks packes so that the kernel will log every rule which
		match the packets as those traverse the tables, chains, rules.
		(The ipt_LOG or ip6t_LOG module is required for the logging.)

config FREETZ_LIB_libxt_u32
	bool "libxt_u32.so"
	default n
	help
		U32 tests whether quantities of up to 4 bytes extracted from a packet
		have specified values. The specification of what to extract is general
		enough to find data at given offsets from tcp headers or payloads.

config FREETZ_LIB_libxt_udp
	bool "libxt_udp.so"
	select FREETZ_MODULE_xt_tcpudp if FREETZ_KERNEL_VERSION_2_6_19
	default n
	help
		These extensions can be used if `--protocol udp' is specified.
endmenu

menu "Select shared libraries (IPv6)"
	depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS
	depends on FREETZ_TARGET_IPV6_SUPPORT

config FREETZ_LIB_libip6t_ah
	bool "libip6t_ah.so"
	default n
	help
		This module matches the parameters in Authentication header of IPsec
		packets.

config FREETZ_LIB_libip6t_dst
	bool "libip6t_dst.so"
	default n
	help
		This module matches the parameters in Destination Options header.

config FREETZ_LIB_libip6t_eui64
	bool "libip6t_eui64.so"
	default n
	help
		This module matches the EUI-64 part of a stateless autoconfigured IPv6
		address.

config FREETZ_LIB_libip6t_frag
	bool "libip6t_frag.so"
	default n
	help
		This module matches the parameters in Fragment header.

config FREETZ_LIB_libip6t_hbh
	bool "libip6t_hbh.so"
	default n
	help
		This module matches the parameters in Hop-by-Hop Options header.

config FREETZ_LIB_libip6t_hl
	bool "libip6t_hl.so"
	default n
	help
		This module matches the Hop Limit field in the IPv6 header.

config FREETZ_LIB_libip6t_HL
	bool "libip6t_HL.so"
	default n
	help
		This is used to modify the Hop Limit field in IPv6 header.
		The Hop Limit field is similar to what is known as TTL value in IPv4.

config FREETZ_LIB_libip6t_icmp6
	bool "libip6t_icmp6.so"
	default y
	help
		This extension can be used if `--protocol ipv6-icmp' or
		`--protocol icmpv6' is specified.

config FREETZ_LIB_libip6t_ipv6header
	bool "libip6t_ipv6header.so"
	default n
	help
		This module matches IPv6 extension headers and/or upper layer header.

config FREETZ_LIB_libip6t_LOG
	bool "libip6t_LOG.so"
	default n
	help
		Turn on kernel logging of matching packets. When this option is set
		for a rule, the Linux kernel will print some information on all
		matching packets (like most IPv6 IPv6-header fields) via the kernel log
		(where it can be read with dmesg or syslogd (8)).

config FREETZ_LIB_libip6t_mh
	bool "libip6t_mh.so"
	default n
	help
		This extension is loaded if `--protocol ipv6-mh' or `--protocol mh' is
		specified.

config FREETZ_LIB_libip6t_REJECT
	bool "libip6t_REJECT.so"
	default n
	help
		This is used to send back an error packet in response to the matched
		packet: otherwise it is equivalent to DROP so it is a terminating
		TARGET, ending rule traversal.

config FREETZ_LIB_libip6t_rt
	bool "libip6t_rt.so"
	default n
	help
		Match on IPv6 routing header.
endmenu
 

olistudent

IPPF-Urgestein
Mitglied seit
19 Okt 2004
Beiträge
14,779
Punkte für Reaktionen
10
Punkte
38
Bei Kernelmodulen gibt es immer 2 Stufen zu beachten:
1. Sie müssen in der .config des aktuellen Kernels aktiviert sein. Ändern kannst du das mit "make kernel-menuconfig"
2. Du musst sie im "make menuconfig" auswählen.

Ob Schritt 1 richtig ist kannst du unter freetz-trunk/kernel/modules-ur8-16mb-7270_05.05 nachprüfen. Sind die Module dort vorhanden?
Ob Schritt 2 funktioniert hat siehst du beim make, wenn die Module unter "installing modules" kurz vor Schluss auftauchen.
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
Hier mal meine kernel config:
Code:
CONFIG_NF_CONNTRACK=y
Da ist nf_conntrack schon fest im Kernel eingebaut. Das ist der Grund, warum Du die davon abhängigen Module wie nf_conntrack_ipv4 laden kannst.
Außerdem gibt es dann keine Notwendigkeit ein Modul auf die Box zu bringen, die Funktion ist bereits im Kernel fest enthalten.

Was ist denn dann nochmal das Problem? Nur dass Du nf_conntrack in der Modul-Liste vermisst, oder gibt es etwas, was nicht funktioniert?
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Ob Schritt 1 richtig ist kannst du unter freetz-trunk/kernel/modules-ur8-16mb-7270_05.05 nachprüfen. Sind die Module dort vorhanden?
Ob Schritt 2 funktioniert hat siehst du beim make, wenn die Module unter "installing modules" kurz vor Schluss auftauchen.
Ich habe testweise nochmal den aktuellen Trunk (r8564) komplett neu ausgecheckt und lediglich iptables eingebunden.
Hier die .config:
Code:
#
# Automatically generated file; DO NOT EDIT.
# Freetz Configuration
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_05_05=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_6840 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5124 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
# FREETZ_TYPE_FON_WLAN_7270_V1 is not set
# FREETZ_TYPE_FON_WLAN_7270_V2 is not set
FREETZ_TYPE_FON_WLAN_7270_V3=y
# FREETZ_TYPE_FON_WLAN_7320 is not set
# FREETZ_TYPE_FON_WLAN_7330 is not set
# FREETZ_TYPE_FON_WLAN_7340 is not set
# FREETZ_TYPE_FON_WLAN_7390 is not set
# FREETZ_TYPE_FON_WLAN_7570 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_WLAN_3270_V3 is not set
# FREETZ_TYPE_WLAN_3370 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_FON_WLAN_7270=y
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANGUAGE="de"
# FREETZ_TYPE_LABOR is not set
# FREETZ_TYPE_ALIEN_HARDWARE is not set
FREETZ_AVM_VERSION_STRING="7270_05.05"
FREETZ_FILESYSTEM_MTD_SIZE=0
FREETZ_TYPE_PREFIX="7270_v3"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_SHOW_ADVANCED=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF_16MB=y
FREETZ_TARGET_REF="16mb"
FREETZ_KERNEL_REF_16MB=y
FREETZ_KERNEL_REF="16mb"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_AVM_AURA_USB=y
FREETZ_HAS_AVM_MINID=y
FREETZ_HAS_AVM_NTFS=y
FREETZ_HAS_AVM_IPV6=y
FREETZ_HAS_AVM_WEBDAV=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_AVM_EXT3=y
FREETZ_HAS_AVM_TR069=y
FREETZ_HAS_AVM_CHRONYD=y
FREETZ_HAS_AVM_DECT=y
FREETZ_HAS_AVM_OPENSSL_LIBS=y
FREETZ_HAS_AVM_LSOF=y
FREETZ_HAS_AVM_NAS=y
FREETZ_HAS_AVM_PHONE=y
FREETZ_HAS_AVM_STRACE=y
FREETZ_HAS_AVM_TAM=y
FREETZ_HAS_AVM_UDEV=y
# FREETZ_HAS_UPDATE_FILESYSTEM_IMAGE is not set
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_AVM_USB_HOST=y
# FREETZ_HAS_AVM_USB_HOST_AHCI is not set
FREETZ_HAS_AVM_E2FSPROGS=y
FREETZ_HAS_AVM_WLAN=y
FREETZ_HAS_AVM_UMTS=y
FREETZ_HAS_AVM_JFFS2=y
# FREETZ_HAS_AVM_JUNK_BYTES is not set

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Web menu patches -----------------------
#
# FREETZ_PATCH_VCC is not set
# FREETZ_PATCH_ATA is not set
# FREETZ_PATCH_DSL_EXPERT is not set
# FREETZ_ADD_REGEXT_GUI is not set
# FREETZ_PATCH_SIGNED is not set

#
# USB patches --------------------
#
FREETZ_PATCH_FREETZMOUNT=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
# FREETZ_AUTOMOUNT_EXT2 is not set
FREETZ_AUTOMOUNT_EXT3=y
# FREETZ_AUTOMOUNT_EXT4 is not set
FREETZ_AUTOMOUNT_FAT=y
# FREETZ_AUTOMOUNT_HFS is not set
# FREETZ_AUTOMOUNT_HFS_PLUS is not set
# FREETZ_AUTOMOUNT_LUKS is not set
FREETZ_AUTOMOUNT_NTFS=y
# FREETZ_AUTOMOUNT_REISER_FS is not set
# FREETZ_AUTOMOUNT_LINUXSWAP is not set
# FREETZ_PATCH_MAXDEVCOUNT is not set
# FREETZ_MODIFY_UMTSD is not set
# FREETZ_CUSTOM_UDEV_RULES is not set

#
# Removal patches ------------------------
#
# FREETZ_REMOVE_ANNEX_A_FIRMWARE is not set
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_NAS is not set
# FREETZ_REMOVE_AVM_VPN is not set

#
# Remove brandings
#
FREETZ_REMOVE_BRANDING_1und1=y
# FREETZ_REMOVE_BRANDING_avm is not set
FREETZ_REMOVE_BRANDING_otwo=y
# FREETZ_REMOVE_CAPIOVERTCP is not set
FREETZ_REMOVE_CHRONYD=y
FREETZ_REMOVE_DECT=y
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_SHOWDSLDSTAT is not set
FREETZ_REMOVE_DTRACE=y
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_JFFS2 is not set
# FREETZ_REMOVE_LSOF is not set
# FREETZ_REMOVE_MEDIASRV is not set
# FREETZ_REMOVE_MINID is not set
# FREETZ_REMOVE_NTFS is not set
# FREETZ_REMOVE_PRINTSERV is not set
# FREETZ_REMOVE_RUNCLOCK is not set
# FREETZ_REMOVE_SMBD is not set
# FREETZ_REMOVE_STRACE is not set
FREETZ_REMOVE_SUPPORT=y
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_UMTSD is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set
# FREETZ_REMOVE_AVM_E2FSPROGS is not set
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WEBDAV is not set
# FREETZ_REMOVE_WLAN is not set

#
# Replacement patches --------------------
#
# FREETZ_REPLACE_SSL_LIBS is not set
FREETZ_REPLACE_DTRACE=y
# FREETZ_REPLACE_ONLINECHANGED is not set

#
# Additional patches ---------------------
#
# FREETZ_ENFORCE_URLADER_SETTINGS is not set

#
# Misc patches ---------------------------
#
# FREETZ_DISABLE_SERIAL_CONSOLE is not set

#
# AVM daemons ----------------------------
#
# FREETZ_AVMDAEMON_DISABLE_IGD is not set
# FREETZ_AVMDAEMON_DISABLE_NTP is not set
# FREETZ_AVMDAEMON_DISABLE_IGM is not set
FREETZ_AVMDAEMON_DISABLE_TR069=y
# FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS is not set

#
# Package selection
#

#
# Debug helpers
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Standard packages
#
# FREETZ_PACKAGE_AICCU is not set
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DNSMASQ is not set
# FREETZ_PACKAGE_DROPBEAR is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FORTUNE is not set
# FREETZ_PACKAGE_FUSE is not set
FREETZ_PACKAGE_HASERL=y
# FREETZ_PACKAGE_HASERL_WITH_LUA is not set
FREETZ_PACKAGE_INETD=y
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NC6 is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NTFS is not set
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PORTMAP is not set

#
# Point-to-Point
#
# FREETZ_PACKAGE_PPPD is not set
# FREETZ_PACKAGE_PPPD_CHAT is not set
# FREETZ_PACKAGE_PPTP is not set
# FREETZ_PACKAGE_PPTPD is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RADVD is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_VNSTAT is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set
# FREETZ_PACKAGE_XMAIL is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_APACHE2 is not set
# FREETZ_PACKAGE_AUTOFS is not set
# FREETZ_PACKAGE_AVAHI is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIND is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BITTWIST is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CLASSPATH is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DBUS is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FFMPEG is not set
# FREETZ_PACKAGE_FSTYP is not set
# FREETZ_PACKAGE_GIT is not set
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_GNUTLS is not set
# FREETZ_PACKAGE_GOCR is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HOL is not set
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTPDATE is not set
# FREETZ_PACKAGE_HTTPRY is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_IFSTAT is not set
# FREETZ_PACKAGE_IFTOP is not set
# FREETZ_PACKAGE_IGMPPROXY is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IPUTILS is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LFTP is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MEDIATOMB is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MINI_SNMPD is not set
# FREETZ_PACKAGE_MINICOM is not set
# FREETZ_PACKAGE_MINIDLNA is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NCFTP is not set
# FREETZ_PACKAGE_NETATALK is not set
# FREETZ_PACKAGE_NETPBM is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
# FREETZ_PACKAGE_NFSROOT is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_OIDENTD is not set
# FREETZ_PACKAGE_OPENCONNECT is not set
# FREETZ_PACKAGE_OPENDD is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_sshd is not set
# FREETZ_PACKAGE_OPENSSH_ssh is not set
# FREETZ_PACKAGE_OPENSSH_scp is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_sftp is not set
# FREETZ_PACKAGE_OPENSSH_sftp_server is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RIPMIME is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SIPROXD is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLANG is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SMUSBUTIL is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SPAWN_FCGI is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_SSHFS_FUSE is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SUBVERSION is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_TRICKLE is not set
# FREETZ_PACKAGE_TMUX is not set
# FREETZ_PACKAGE_UDPXY is not set
# FREETZ_PACKAGE_UMURMUR is not set
# FREETZ_PACKAGE_UNRAR is not set
# FREETZ_PACKAGE_USBIP is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_UTIL_LINUX_NG is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_VTUN is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_PACKAGE_XSLTPROC is not set

#
# Web interfaces
#
# FREETZ_PACKAGE_AUTHORIZED_KEYS is not set
# FREETZ_PACKAGE_AVM_FIREWALL is not set
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
# FREETZ_PACKAGE_DNSD_CGI is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_PHPXMAIL is not set
# FREETZ_PACKAGE_PPP_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
# FREETZ_PACKAGE_VNSTAT_CGI is not set
# FREETZ_PACKAGE_WOL_CGI is not set
FREETZ_SHOW_UNSTABLE_PACKAGES=y

#
# Unstable packages
#
# FREETZ_PACKAGE_COLLECTD is not set
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_GW6 is not set
# FREETZ_PACKAGE_HP_UTILS is not set
# FREETZ_PACKAGE_HPLIP is not set
FREETZ_PACKAGE_IPTABLES=y
FREETZ_PACKAGE_IPTABLES_IS_SELECTABLE=y
FREETZ_PACKAGE_IPTABLES_SAVE_RESTORE=y
FREETZ_PACKAGE_IPTABLES_XML=y
FREETZ_PACKAGE_IPTABLES_CGI=y
# FREETZ_PACKAGE_NHIPT is not set
FREETZ_PACKAGE_IPTABLES_STANDARD_MODULES=y
FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES=y

#
# Select kernel modules (IPv4)
#
FREETZ_MODULE_nf_conntrack=y
FREETZ_MODULE_nf_conntrack_ftp=y
FREETZ_MODULE_nf_conntrack_h323=y
FREETZ_MODULE_nf_conntrack_irc=y
FREETZ_MODULE_nf_conntrack_ipv4=y
FREETZ_MODULE_nf_conntrack_pptp=y
FREETZ_MODULE_nf_conntrack_proto_gre=y
FREETZ_MODULE_nf_conntrack_tftp=y
FREETZ_MODULE_nf_defrag_ipv4=y
FREETZ_MODULE_nf_nat=y
FREETZ_MODULE_nf_nat_ftp=y
# FREETZ_MODULE_nf_nat_h323 is not set
# FREETZ_MODULE_nf_nat_irc is not set
# FREETZ_MODULE_nf_nat_pptp is not set
FREETZ_MODULE_nf_nat_tftp=y
FREETZ_MODULE_iptable_filter=y
FREETZ_MODULE_iptable_mangle=y
FREETZ_MODULE_iptable_nat=y
FREETZ_MODULE_iptable_raw=y
FREETZ_MODULE_ip_tables=y
FREETZ_MODULE_ipt_LOG=y
FREETZ_MODULE_ipt_REJECT=y
FREETZ_MODULE_ipt_ttl=y
FREETZ_MODULE_ipt_TTL=y

#
# x_tables (both IPv4 and IPv6)
#
FREETZ_MODULE_x_tables=y
FREETZ_MODULE_xt_CLASSIFY=y
FREETZ_MODULE_xt_comment=y
FREETZ_MODULE_xt_esp=y
FREETZ_MODULE_xt_length=y
FREETZ_MODULE_xt_limit=y
FREETZ_MODULE_xt_mac=y
FREETZ_MODULE_xt_multiport=y
FREETZ_MODULE_xt_mark=y
FREETZ_MODULE_xt_MARK=y
# FREETZ_MODULE_xt_NFQUEUE is not set
FREETZ_MODULE_xt_iprange=y
FREETZ_MODULE_xt_pkttype=y
FREETZ_MODULE_xt_physdev=y
FREETZ_MODULE_xt_quota=y
FREETZ_MODULE_xt_realm=y
FREETZ_MODULE_xt_statistic=y
FREETZ_MODULE_xt_string=y
FREETZ_MODULE_xt_tcpudp=y
FREETZ_MODULE_xt_tcpmss=y

#
# Select kernel modules (IPv6)
#
# FREETZ_MODULE_ip6_queue is not set
# FREETZ_MODULE_ip6_tables is not set
# FREETZ_MODULE_nf_conntrack_ipv6 is not set
FREETZ_PACKAGE_IPTABLES_SHARED_LIBS=y

#
# Select shared libraries (IPv4)
#
FREETZ_LIB_libipt_addrtype=y
FREETZ_LIB_libipt_ah=y
FREETZ_LIB_libipt_CLUSTERIP=y
FREETZ_LIB_libipt_DNAT=y
FREETZ_LIB_libipt_ecn=y
FREETZ_LIB_libipt_ECN=y
FREETZ_LIB_libipt_icmp=y
FREETZ_LIB_libipt_LOG=y
FREETZ_LIB_libipt_MASQUERADE=y
FREETZ_LIB_libipt_MIRROR=y
FREETZ_LIB_libipt_NETMAP=y
FREETZ_LIB_libipt_realm=y
FREETZ_LIB_libipt_REDIRECT=y
FREETZ_LIB_libipt_REJECT=y
FREETZ_LIB_libipt_SAME=y
FREETZ_LIB_libipt_SNAT=y
FREETZ_LIB_libipt_ttl=y
FREETZ_LIB_libipt_TTL=y
FREETZ_LIB_libipt_ULOG=y
FREETZ_LIB_libipt_unclean=y

#
# Select shared libraries (both IPv4 and IPv6)
#
FREETZ_LIB_libxt_CLASSIFY=y
FREETZ_LIB_libxt_comment=y
FREETZ_LIB_libxt_connbytes=y
FREETZ_LIB_libxt_connmark=y
FREETZ_LIB_libxt_CONNMARK=y
FREETZ_LIB_libxt_CONNSECMARK=y
FREETZ_LIB_libxt_conntrack=y
FREETZ_LIB_libxt_dscp=y
FREETZ_LIB_libxt_DSCP=y
FREETZ_LIB_libxt_esp=y
FREETZ_LIB_libxt_hashlimit=y
FREETZ_LIB_libxt_helper=y
FREETZ_LIB_libxt_iprange=y
FREETZ_LIB_libxt_length=y
FREETZ_LIB_libxt_limit=y
FREETZ_LIB_libxt_mac=y
FREETZ_LIB_libxt_mark=y
FREETZ_LIB_libxt_MARK=y
FREETZ_LIB_libxt_multiport=y
FREETZ_LIB_libxt_NFLOG=y
FREETZ_LIB_libxt_NFQUEUE=y
FREETZ_LIB_libxt_NOTRACK=y
FREETZ_LIB_libxt_owner=y
FREETZ_LIB_libxt_physdev=y
FREETZ_LIB_libxt_pkttype=y
FREETZ_LIB_libxt_quota=y
FREETZ_LIB_libxt_rateest=y
FREETZ_LIB_libxt_RATEEST=y
FREETZ_LIB_libxt_sctp=y
FREETZ_LIB_libxt_SECMARK=y
FREETZ_LIB_libxt_standard=y
FREETZ_LIB_libxt_state=y
FREETZ_LIB_libxt_statistic=y
FREETZ_LIB_libxt_string=y
FREETZ_LIB_libxt_tcpmss=y
FREETZ_LIB_libxt_TCPMSS=y
FREETZ_LIB_libxt_tcp=y
FREETZ_LIB_libxt_time=y
FREETZ_LIB_libxt_tos=y
FREETZ_LIB_libxt_TOS=y
FREETZ_LIB_libxt_TRACE=y
FREETZ_LIB_libxt_u32=y
FREETZ_LIB_libxt_udp=y

#
# Select shared libraries (IPv6)
#
# FREETZ_LIB_libip6t_ah is not set
# FREETZ_LIB_libip6t_dst is not set
# FREETZ_LIB_libip6t_eui64 is not set
# FREETZ_LIB_libip6t_frag is not set
# FREETZ_LIB_libip6t_hbh is not set
# FREETZ_LIB_libip6t_hl is not set
# FREETZ_LIB_libip6t_HL is not set
FREETZ_LIB_libip6t_icmp6=y
# FREETZ_LIB_libip6t_ipv6header is not set
# FREETZ_LIB_libip6t_LOG is not set
# FREETZ_LIB_libip6t_mh is not set
# FREETZ_LIB_libip6t_REJECT is not set
# FREETZ_LIB_libip6t_rt is not set

#
# SANE
#
# FREETZ_PACKAGE_SANE_BACKENDS is not set
# FREETZ_PACKAGE_TINC is not set
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
FREETZ_PACKAGE_MOD=y
FREETZ_PACKAGE_MOD_ETCSERVICES=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_KERNEL_SITE="@AVM/fritzbox.fon_wlan_7270_v3/x_misc/opensrc"
FREETZ_DL_KERNEL_SOURCE="fritzbox-source-files-05.05.tar.gz"
FREETZ_DL_KERNEL_SOURCE_MD5="19280ad861a7e88698d41211996c5ac6"
FREETZ_DL_SITE="@AVM/fritzbox.fon_wlan_7270_v3/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270_v3.74.05.05.image"
FREETZ_DL_SOURCE_MD5="3835ce8f42fe76a689e7baee7956b73b"

#
# Build system options
#
FREETZ_VERBOSITY_LEVEL=2
FREETZ_SIZEINFO_COMPRESSED=y
# FREETZ_SIZEINFO_UNCOMPRESSED is not set
FREETZ_JLEVEL=2
FREETZ_CHECK_CHANGED=y
# FREETZ_BACKUP_CONFIG_CACHE is not set
FREETZ_DL_SITE_USER=""

#
# Freetz customisation
#
FREETZ_OPTIONS_ETCSERVICES=y
FREETZ_SECURITY_LEVEL=1
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_ATOMPHIL is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_TAGGING_NONE=y
# FREETZ_TAGGING_CUMA is not set
FREETZ_TAGGING_STRING="none"

#
# Additional image/box information
#
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_USER_DEFINED_COMMENT=""
# FREETZ_CUSTOM_IMAGE_NAME is not set
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
FREETZ_CREATE_SEPARATE_OPTIONS_CFG=y
# FREETZ_REMOVE_DOT_CONFIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
FREETZ_SQUASHFS_BLOCKSIZE=65536

#
# Kernel and modules options
#
# FREETZ_KERNEL_VERSION_2_6_13 is not set
# FREETZ_KERNEL_VERSION_2_6_19 is not set
# FREETZ_KERNEL_VERSION_2_6_28 is not set
FREETZ_KERNEL_VERSION_2_6_32=y
FREETZ_KERNEL_VERSION="2.6.32"
FREETZ_KERNEL_VERSION_2_6_13_MIN=y
FREETZ_KERNEL_VERSION_2_6_19_MIN=y
FREETZ_KERNEL_VERSION_2_6_28_MIN=y
FREETZ_KERNEL_VERSION_2_6_32_MIN=y
# FREETZ_KERNEL_VERSION_2_6_13_MAX is not set
# FREETZ_KERNEL_VERSION_2_6_19_MAX is not set
# FREETZ_KERNEL_VERSION_2_6_28_MAX is not set
FREETZ_KERNEL_VERSION_2_6_32_MAX=y
FREETZ_KERNEL_LAYOUT_UR8=y
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_MODULES_KVER="2.6.32.21"
# FREETZ_MODULES_ALL is not set

#
# block
#
# FREETZ_MODULE_block2mtd is not set
# FREETZ_MODULE_ramzswap is not set
# FREETZ_MODULE_xvmalloc is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set

#
# crypto
#
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_sha1_generic is not set
# FREETZ_MODULE_sha256_generic is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_cp210x is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set
# FREETZ_MODULE_option is not set

#
# fs
#
# FREETZ_MODULE_autofs4 is not set
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_ext4 is not set
FREETZ_MODULE_fat=y
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
# FREETZ_MODULE_iso9660 is not set
# FREETZ_MODULE_jbd2 is not set
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
FREETZ_MODULE_vfat=y
FREETZ_MODULE_msdos=y
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc16 is not set
# FREETZ_MODULE_crc_ccitt is not set
# FREETZ_MODULE_lzo_compress is not set
# FREETZ_MODULE_lzo_decompress is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_cls_u32 is not set
# FREETZ_MODULE_l2cap is not set

#
# network scheduler
#
# FREETZ_MODULE_sch_cbq is not set
# FREETZ_MODULE_sch_htb is not set
# FREETZ_MODULE_sch_llq is not set
# FREETZ_MODULE_sch_sfq is not set
# FREETZ_MODULE_sch_tbf is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_BLKID is not set
# FREETZ_BUSYBOX_BZIP2 is not set
# FREETZ_BUSYBOX_CHGRP is not set
# FREETZ_BUSYBOX_FEATURE_DD_IBS_OBS is not set
# FREETZ_BUSYBOX_FINDFS is not set
# FREETZ_BUSYBOX_DNSD is not set
# FREETZ_BUSYBOX_DIFF is not set
# FREETZ_BUSYBOX_DOS2UNIX is not set
FREETZ_BUSYBOX_ETHER_WAKE=y
# FREETZ_BUSYBOX_FAKEIDENTD is not set
# FREETZ_BUSYBOX_FANCY_KEYS is not set
# FREETZ_BUSYBOX_FUSER is not set
FREETZ_BUSYBOX_INETD=y
FREETZ_BUSYBOX_IP=y
FREETZ_BUSYBOX_FEATURE_IP_ADDRESS=y
FREETZ_BUSYBOX_FEATURE_IP_LINK=y
# FREETZ_BUSYBOX_FEATURE_IP_RULE is not set
FREETZ_BUSYBOX_FEATURE_IP_ROUTE=y
FREETZ_BUSYBOX_FEATURE_IP_TUNNEL=y
# FREETZ_BUSYBOX_LAST is not set
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_LONG_OPTS is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
FREETZ_BUSYBOX_MD5SUM=y
# FREETZ_BUSYBOX_MDEV is not set
# FREETZ_BUSYBOX_MODINFO is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_PSCAN is not set
FREETZ_BUSYBOX_REALPATH=y
# FREETZ_BUSYBOX_RENICE is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_SHA1SUM is not set
# FREETZ_BUSYBOX_SPLIT is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_STUN_IP=y
# FREETZ_BUSYBOX_TAC is not set
FREETZ_BUSYBOX_TAR_OLDGNU_COMPATIBILITY=y
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UNIX2DOS is not set
# FREETZ_BUSYBOX_UNZIP is not set
# FREETZ_BUSYBOX_FEATURE_USERNAME_COMPLETION is not set
FREETZ_BUSYBOX_VOLUMEID=y
FREETZ_BUSYBOX_VOLUMEID_EXT=y
FREETZ_BUSYBOX_VOLUMEID_FAT=y
# FREETZ_BUSYBOX_VOLUMEID_HFS is not set
# FREETZ_BUSYBOX_VOLUMEID_LINUXRAID is not set
# FREETZ_BUSYBOX_VOLUMEID_LINUXSWAP is not set
# FREETZ_BUSYBOX_VOLUMEID_LUKS is not set
FREETZ_BUSYBOX_VOLUMEID_NTFS=y
# FREETZ_BUSYBOX_VOLUMEID_REISERFS is not set
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_WHO is not set
# FREETZ_BUSYBOX_WHOAMI is not set

#
# IPv6 Options
#
FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS=y
# FREETZ_BUSYBOX_PING6 is not set
# FREETZ_BUSYBOX_TRACEROUTE6 is not set

#
# Shared Libraries
#

#
# Apache Portable Runtime libs
#
# FREETZ_LIB_libapr is not set
# FREETZ_LIB_libapr_WITH_DSO is not set
# FREETZ_LIB_libaprutil is not set
# FREETZ_LIB_libaprutil_WITH_LIBDB is not set

#
# Avahi libraries
#
# FREETZ_LIB_libavahi_common is not set
# FREETZ_LIB_libavahi_core is not set
# FREETZ_LIB_libavahi_client is not set

#
# C++
#
# FREETZ_LIB_STDCXXLIB is not set
# FREETZ_LIB_STDCXXLIB_WITH_WCHAR is not set
# FREETZ_LIB_libstdc__ is not set
# FREETZ_LIB_libuClibc__ is not set
# FREETZ_LIB_libuClibc__WITH_WCHAR is not set

#
# Charsets & Internationalization
#
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libintl is not set

#
# Crypto & SSL
#

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# Digests ---
#

#
# Symmetric ciphers ---
#

#
# Asymmetric ciphers ---
#

#
# GnuTLS ---------------------------------
#
# FREETZ_LIB_libgnutls is not set
# FREETZ_LIB_libtasn1 is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libpolarssl is not set
# FREETZ_LIB_libcrypto is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
# FREETZ_LIB_libz is not set

#
# Database
#
# FREETZ_LIB_libdb is not set
# FREETZ_LIB_libsqlite3 is not set

#
# File systems
#

#
# e2fsprogs libraries
#
# FREETZ_LIB_libblkid is not set
# FREETZ_LIB_libcom_err is not set
# FREETZ_LIB_libe2p is not set
# FREETZ_LIB_libext2fs is not set
# FREETZ_LIB_libss is not set
# FREETZ_LIB_libuuid is not set
# FREETZ_LIB_libfuse is not set
# FREETZ_LIB_libntfs is not set

#
# GLib
#
# FREETZ_LIB_libglib_1 is not set
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgio_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libexif is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set
# FREETZ_LIB_libgd is not set
# FREETZ_LIB_libopenjpeg is not set
# FREETZ_LIB_libnetpbm is not set

#
# Multi precision arithmetic libs
#
# FREETZ_LIB_libgmp is not set
# FREETZ_LIB_libmpfr is not set
# FREETZ_LIB_libmpc is not set

#
# Multimedia
#

#
# Audio and video codecs
#

#
# Audio codecs
#
# FREETZ_LIB_libFLAC is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libogg is not set

#
# FFmpeg libraries
#
# FREETZ_LIB_libavcodec is not set
# FREETZ_LIB_libavdevice is not set
# FREETZ_LIB_libavfilter is not set
# FREETZ_LIB_libavformat is not set
# FREETZ_LIB_libavutil is not set
# FREETZ_LIB_libpostproc is not set
# FREETZ_LIB_libswresample is not set
# FREETZ_LIB_libswscale is not set

#
# Video codecs
#

#
# Vorbis video codec ---------------------
#
# FREETZ_LIB_libvorbis is not set
# FREETZ_LIB_libvorbisenc is not set
# FREETZ_LIB_libvorbisfile is not set

#
# ID3 tag reading libs
#
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libtag is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set

#
# Networking
#

#
# ATM ------------------------------------
#
# FREETZ_LIB_libatm is not set

#
# Bluetooth ------------------------------
#
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# ISDN & CAPI ----------------------------
#
# FREETZ_LIB_libcapi20 is not set

#
# Misc networking ------------------------
#
# FREETZ_LIB_libdnet is not set
# FREETZ_LIB_libpcap is not set
# FREETZ_LIB_libnet is not set
# FREETZ_LIB_liboping is not set
# FREETZ_LIB_libosip2 is not set
# FREETZ_LIB_libosipparser2 is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set

#
# Regular expressions
#
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
# FREETZ_LIB_libutil is not set

#
# USB & FTDI
#
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libusb_1 is not set
# FREETZ_LIB_libftdi is not set

#
# Web and WebDAV
#
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libcurl_WITH_ZLIB is not set
# FREETZ_LIB_libjs is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libneon_WITH_SSL is not set
# FREETZ_LIB_libneon_WITH_ZLIB is not set

#
# XML & XSLT
#
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libxml2 is not set
# FREETZ_LIB_libxml2_WITH_HTML is not set
# FREETZ_LIB_libxslt is not set
# FREETZ_LIB_libexslt is not set
# FREETZ_LIB_libdbus is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libconfig is not set
# FREETZ_LIB_libdaemon is not set
# FREETZ_LIB_libdevmapper is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libffi is not set
FREETZ_LIB_libctlmgr=y
# FREETZ_LIB_libmultid is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_liblua is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libprotobuf_c is not set
# FREETZ_LIB_librrd is not set
# FREETZ_LIB_librrd_th is not set
# FREETZ_LIB_libslang is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libwx_baseu is not set

#
# Strip binaries, libs, modules and scripts
#
FREETZ_STRIP_BINARIES=y
# FREETZ_STRIP_LIBRARIES is not set
FREETZ_STRIP_MODULES_NONE=y
# FREETZ_STRIP_MODULES_FREETZ is not set
# FREETZ_STRIP_MODULES_ALL is not set
# FREETZ_STRIP_SCRIPTS is not set

#
# External
#
# EXTERNAL_ENABLED is not set
FREETZ_TARGET_ARCH_LE=y
FREETZ_TARGET_ARCH="mipsel"
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"

#
# Toolchain options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
# FREETZ_UCLIBC_0_9_28_BASED_BOX is not set
# FREETZ_UCLIBC_0_9_29_BASED_BOX is not set
# FREETZ_UCLIBC_0_9_30_BASED_BOX is not set
FREETZ_UCLIBC_0_9_31_BASED_BOX=y
# FREETZ_UCLIBC_0_9_32_BASED_BOX is not set

#
# Kernel toolchain options ----------------------------------
#
FREETZ_KERNEL_COMPILER_GCC_4_4=y
FREETZ_KERNEL_GCC_VERSION="4.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.22"

#
# Target toolchain options ----------------------------------
#
FREETZ_TARGET_UCLIBC_VERSION_0_9_31=y
FREETZ_TARGET_COMPILER_GCC_4_5=y
# FREETZ_TARGET_COMPILER_GCC_4_6 is not set
FREETZ_STDCXXLIB_USE_UCLIBCXX=y
# FREETZ_STDCXXLIB_USE_GNULIBSTDCXX is not set
FREETZ_TARGET_UCLIBC_VERSION="0.9.31.1"
FREETZ_TARGET_GCC_VERSION="4.5.3"
FREETZ_GNULIBSTDCXX_VERSION="6.0.14"
FREETZ_STDCXXLIB="uclibcxx"
FREETZ_TARGET_BINUTILS_VERSION="2.22"
FREETZ_TARGET_UCLIBC_REF="mod"
FREETZ_TARGET_CFLAGS="-Os -pipe -Wa,--trap"
# FREETZ_TARGET_UCLIBC_REDUCED_LOCALE_SET is not set
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
# FREETZ_TARGET_TOOLCHAIN is not set

#
# Both kernel and target toolchain related options ----------
#
# FREETZ_TOOLCHAIN_STATIC is not set
FREETZ_TOOLCHAIN_MINIMIZE_REQUIRED_GLIBC_VERSION=y
# FREETZ_TOOLCHAIN_32BIT is not set
# FREETZ_TOOLCHAIN_CCACHE is not set
Dann heb ich, wie bereits mehrfach zuvor (erwähnt), die von mir benötigten Module im make kernel-menuconfig ausgewählt:
Code:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32.21
# Sun Feb  5 15:46:58 2012
#
CONFIG_MIPS=y

#
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
CONFIG_MIPS_UR8=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_MACH_AR7240 is not set
# CONFIG_MACH_AR724x is not set
# CONFIG_MACH_AR933x is not set
# CONFIG_MACH_AR934x is not set
# CONFIG_MACH_AR7100 is not set
# CONFIG_MACH_HORNET is not set
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_MACH_ATHEROS is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y

#
# *** AVM Board PCI Configuration ***
#
CONFIG_AVM_PCI_DEVICE_COUNT=1
CONFIG_AVM_PCI_INT_A=y
# CONFIG_AVM_PCI_INT_B is not set
# CONFIG_AVM_PCI_INT_C is not set
CONFIG_AVM_PCI_REQ_AND_GNT_0=y
# CONFIG_AVM_PCI_REQ_AND_GNT_1 is not set
# CONFIG_AVM_PCI_REQ_AND_GNT_2 is not set
CONFIG_AVM_PCI_DEV1_SLOT=14
CONFIG_AVM_PCI_DEV1_INT=0
CONFIG_MIPS_UR8_C55_MEMORY=0x100
CONFIG_MIPS_UR8_WLAN_MEMORY=0x180
CONFIG_MIPS_UR8_PHY_MEMSTART=0x14000000
CONFIG_DISABLE_OOM_KILLER=y
# CONFIG_UR8_CLOCK_SWITCH is not set
# CONFIG_VLYNQ_SUPPORT is not set
# CONFIG_GPIO_SSI is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
# CONFIG_GENERIC_CMOS_UPDATE is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_FPU_EMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_BOARDS_GEN=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5

#
# CPU selection
#
# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_MIPS_24K is not set
# CONFIG_CPU_MIPS_34K is not set
# CONFIG_CPU_MIPS_74K is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR2=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_HARDWARE_WATCHPOINTS=y

#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_THREAD_SIZE_ORDER=2
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y

#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_AVM_SIMPLE_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y

#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_FREEZER is not set

#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_INIT_IN_MONITOR is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_EP is not set
# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
# CONFIG_PM is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NET_DEV_LOAD is not set

#
# Networking options
#
# CONFIG_AVM_PA is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_MULTICAST_FASTFORWARD=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_GENERIC_CONNTRACK is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CONNTRACK_RTSP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_NATTYPE=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_WRR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_LLQ=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_CMTP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_AR7240_SPI_FLASH is not set
# CONFIG_MTD_ATH_FLASH is not set
# CONFIG_MTD_AR7100_SPI_FLASH is not set
# CONFIG_MTD_AR9100_PARALLEL_FLASH is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_COMPCACHE=m
# CONFIG_BLK_DEV_VIRTUAL_FAT is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IMQ is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_AVM_CPMAC=y
CONFIG_AVM_CPMAC_NUM_RX_BUFFERS=256
CONFIG_AVM_CPMAC_SWITCH=y
# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE_MPPC=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_AVM_NET_LINK_AUDIO=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_MISDN is not set
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_OSLIB=y
# CONFIG_CAPI_OSLIB_DEBUG is not set
CONFIG_CAPI_CODEC=m
# CONFIG_CAPI_CODEC_SPEEX is not set
CONFIG_CAPI_CODEC_ILBC=y
CONFIG_CAPI_CODEC_G729=y
CONFIG_CAPI_CODEC_G711=y
CONFIG_CAPI_CODEC_G726=y
CONFIG_CAPI_CODEC_G722=y
CONFIG_CAPI_CODEC_VAD=y
CONFIG_CAPI_CODEC_CNG=y
CONFIG_CAPI_CODEC_FAX=y
CONFIG_AVM_DECT=m
# CONFIG_AVM_DECT_DEBUG is not set
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
CONFIG_ISDN_CAPI_ISDN_NT_PCMLINK=m
CONFIG_ISDN_NT_PCMLINK_BLK=m
CONFIG_ISDN_NT_PCMLINK_E1=m
CONFIG_ISDN_NT_PCMLINK_STACK=m
CONFIG_ISDN_NT_PCMLINK_ISDN_AB=m
# CONFIG_ISDN_NT_PCMLINK_DEBUG is not set
# CONFIG_ISDN_NT_PCMLINK_NO_BCHANNEL is not set
# CONFIG_ISDN_NT_PCMLINK_FAX is not set
# CONFIG_ISDN_NT_PCMLINK_COMPRESS is not set
# CONFIG_ISDN_NT_PCMLINK_MODEM is not set
# CONFIG_ISDN_NT_PCMLINK_DTMF is not set
CONFIG_ISDN_NT_PCMLINK_VCTRLS=y
CONFIG_ISDN_NT_PCMLINK_VCTRLS_NUMBER=5
CONFIG_ISDN_NT_PCMLINK_FRITZX=y
# CONFIG_CAPI_EICON is not set
# CONFIG_PHONE is not set

#
# Input device support
#
# CONFIG_INPUT is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_AVM_8250=y
CONFIG_SERIAL_AVM_8250_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_TFFS=y
CONFIG_TFFS_ENV=y
# CONFIG_TFFS_CRYPT is not set
CONFIG_TFFS_MTD_DEVICE_0=3
CONFIG_TFFS_MTD_DEVICE_1=4
CONFIG_TFFS_PANIC_LOG=y
CONFIG_TFFS_PANIC_LOG_ID=96
CONFIG_AVM_NET_TRACE=y
CONFIG_AVM_POWER=y
CONFIG_AVM_POWERMETER=y
CONFIG_AVM_DECT_IO=m
CONFIG_AVM_DECT_SYNC=10
CONFIG_AVM_SAMMEL=y
CONFIG_AVM_EVENT=y
# CONFIG_AVM_PUSH_BUTTON is not set
# CONFIG_AVM_PUSH_BUTTON2 is not set
# CONFIG_AVM_PUSH_BUTTON3 is not set
# CONFIG_AVM_PUSH_BUTTON4 is not set
# CONFIG_AVM_PUSH_BUTTON5 is not set
# CONFIG_AVM_AUDIO is not set
CONFIG_AVM_WATCHDOG=y
CONFIG_AVM_LED_EVENTS=m
# CONFIG_AVM_LED is not set
CONFIG_AVM_DEBUG=y
# CONFIG_AVM_LED_OUTPUT_SHIFT_REGISTER is not set
CONFIG_AVM_LED_OUTPUT_GPIO=y
# CONFIG_AVM_LED_OUTPUT_DUAL_GPIO is not set
CONFIG_AVM_FLASH_UPDATE=m
# CONFIG_AVM_PIGLET is not set
CONFIG_AVM_PIGLET_NOEMIF=m
CONFIG_AVM_PIGLET_DECT=y
CONFIG_UBIK2=m
CONFIG_UBIK2_DEVELOPMENT_SUPPORT=0
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_USB_MUSB_AVM_BOARD_UR8_VBUS_NOT_CONNECTED is not set
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_INVENTRA_DMA is not set
CONFIG_USB_TI_CPPI_DMA=y
# CONFIG_USB_MUSB_DEBUG is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AVM_REF_CLOCK=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_VLYNQ=y
# CONFIG_VLYNQ_DEBUG is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_RTL8187SE is not set
# CONFIG_RTL8192SU is not set
# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set

#
# Android
#

#
# Qualcomm MSM Camera And Video
#

#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_DST is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set

#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set

#
# AVM UR8 DSL support
#
CONFIG_UR8_DSL=m
# CONFIG_DSL_AVM_MITSCHNEIDER is not set
# CONFIG_DSL_AVM_DEBUG is not set
CONFIG_MIPS_AVALANCHE_INTC=y
CONFIG_AVALANCHE_INTC_TYPE=y
CONFIG_MIPS_YAMUNA=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_XATTR is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
# CONFIG_JFFS2_LZMA is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINI_FO=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_RUNTIME_DEBUG is not set
CONFIG_BDI_SWITCH=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_UNLZMA is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
Ein make liefert im letzten Teil das Folgende:
Code:
installing mod base
  installing libs
  ld_uClibc ....................   10.07 Kb 
  libcrypt .....................    6.99 Kb 
  libctlmgr ....................    2.46 Kb 
  libdl ........................    4.26 Kb 
  libgcc_s .....................   21.06 Kb 
  libip6t_icmp6 ................    2.98 Kb 
  libipt_CLUSTERIP .............    2.44 Kb 
  libipt_DNAT ..................    2.99 Kb 
  libipt_ECN ...................    2.05 Kb 
  libipt_LOG ...................    2.45 Kb 
  libipt_MASQUERADE ............    2.21 Kb 
  libipt_MIRROR ................    1.50 Kb 
  libipt_NETMAP ................    1.93 Kb 
  libipt_REDIRECT ..............    2.25 Kb 
  libipt_REJECT ................    2.49 Kb 
  libipt_SAME ..................    2.48 Kb 
  libipt_SNAT ..................    2.99 Kb 
  libipt_TTL ...................    1.96 Kb 
  libipt_ULOG ..................    2.20 Kb 
  libipt_addrtype ..............    2.83 Kb 
  libipt_ah ....................    2.02 Kb 
  libipt_ecn ...................    2.05 Kb 
  libipt_icmp ..................    3.16 Kb 
  libipt_realm .................    2.30 Kb 
  libipt_ttl ...................    1.97 Kb 
  libipt_unclean ...............    1.51 Kb 
  libm .........................   31.67 Kb 
  libnsl .......................    1.01 Kb 
  libpthread ...................   21.28 Kb 
  librt ........................    2.43 Kb 
  libuClibc ....................  193.02 Kb 
  libxt_CLASSIFY ...............    1.90 Kb 
  libxt_CONNMARK ...............    2.73 Kb 
  libxt_CONNSECMARK ............    1.93 Kb 
  libxt_DSCP ...................    2.26 Kb 
  libxt_MARK ...................    2.46 Kb 
  libxt_NFLOG ..................    2.06 Kb 
  libxt_NFQUEUE ................    2.25 Kb 
  libxt_NOTRACK ................    1.50 Kb 
  libxt_RATEEST ................    5.25 Kb 
  libxt_SECMARK ................    1.82 Kb 
  libxt_TCPMSS .................    1.96 Kb 
  libxt_TOS ....................    2.66 Kb 
  libxt_TRACE ..................    1.50 Kb 
  libxt_comment ................    1.73 Kb 
  libxt_connbytes ..............    2.29 Kb 
  libxt_connmark ...............    1.92 Kb 
  libxt_conntrack ..............    5.10 Kb 
  libxt_dscp ...................    2.28 Kb 
  libxt_esp ....................    1.97 Kb 
  libxt_hashlimit ..............    3.86 Kb 
  libxt_helper .................    1.80 Kb 
  libxt_iprange ................    2.91 Kb 
  libxt_length .................    1.83 Kb 
  libxt_limit ..................    2.42 Kb 
  libxt_mac ....................    1.86 Kb 
  libxt_mark ...................    1.89 Kb 
  libxt_multiport ..............    3.43 Kb 
  libxt_owner ..................    3.17 Kb 
  libxt_physdev ................    2.17 Kb 
  libxt_pkttype ................    2.20 Kb 
  libxt_quota ..................    1.76 Kb 
  libxt_rateest ................    5.79 Kb 
  libxt_sctp ...................    4.38 Kb 
  libxt_standard ...............    1.59 Kb 
  libxt_state ..................    2.19 Kb 
  libxt_statistic ..............    3.57 Kb 
  libxt_string .................    3.19 Kb 
  libxt_tcp ....................    3.64 Kb 
  libxt_tcpmss .................    1.83 Kb 
  libxt_time ...................    4.13 Kb 
  libxt_tos ....................    2.33 Kb 
  libxt_u32 ....................    3.04 Kb 
  libxt_udp ....................    2.33 Kb 
replacing busybox
  replacing busybox-16mb
  installing symlinks
replacing kernel
  replacing kernel-ur8-16mb-7270_05.05 (iln6)
installing modules
  fuse.ko ......................   31.51 Kb 
  msdos.ko .....................    4.82 Kb 
  fat.ko .......................   27.09 Kb 
  vfat.ko ......................    6.18 Kb 
  ipt_REJECT.ko ................    2.25 Kb 
  ipt_LOG.ko ...................    4.00 Kb 
  iptable_raw.ko ...............    1.49 Kb 
  iptable_mangle.ko ............    1.84 Kb 
  iptable_filter.ko ............    1.82 Kb 
  ip_tables.ko .................    7.57 Kb 
  xt_MARK.ko ...................    1.10 Kb 
  xt_pkttype.ko ................    1.18 Kb 
  xt_CLASSIFY.ko ...............    1.11 Kb 
  xt_quota.ko ..................    1.44 Kb 
  xt_tcpmss.ko .................    1.47 Kb 
  x_tables.ko ..................    6.97 Kb 
  xt_iprange.ko ................    1.42 Kb 
  xt_mac.ko ....................    1.16 Kb 
  xt_statistic.ko ..............    1.54 Kb 
  xt_tcpudp.ko .................    1.80 Kb 
  xt_esp.ko ....................    1.33 Kb 
  xt_limit.ko ..................    1.73 Kb 
  xt_realm.ko ..................    1.10 Kb 
  xt_string.ko .................    1.47 Kb 
  xt_mark.ko ...................    1.10 Kb 
  xt_length.ko .................    1.18 Kb 
  xt_multiport.ko ..............    1.80 Kb 
  xt_comment.ko ................    1.10 Kb 
  generating modules.dep
installing packages
  syslogd-cgi-0.2.3 ............    3.20 Kb 
  inetd-0.2 ....................    3.18 Kb 
  iptables-cgi-1.1 .............    5.68 Kb 
  haserl-0.9.29 ................    8.88 Kb 
  iptables-1.4.11.1 ............   51.51 Kb 
  mod-1.0 ......................   85.11 Kb 
  modcgi-0.3 ...................    3.51 Kb 
invoking custom script
processing mod base options
  setting colored style as default
  patching security level
  rc.external was not integrated into image
  integrating stripped .config file into image
stripping leftover unstripped binaries
    build/modified/filesystem/usr/share/ctlmgr/libwlan.so
    build/modified/filesystem/usr/share/ctlmgr/libctlwebdav.so
    build/modified/filesystem/usr/share/ctlmgr/libdsl.so
    build/modified/filesystem/usr/sbin/e2fsck
    build/modified/filesystem/usr/sbin/dsl_monitor
    build/modified/filesystem/usr/sbin/athstatsclr
    build/modified/filesystem/usr/sbin/mke2fs
    build/modified/filesystem/usr/sbin/athstats
    build/modified/filesystem/usr/sbin/fsck
    build/modified/filesystem/usr/sbin/80211stats
    build/modified/filesystem/usr/sbin/blkid
    build/modified/filesystem/usr/sbin/mkfs.ext2
    build/modified/filesystem/usr/sbin/mkfs.ext3
    build/modified/filesystem/usr/bin/rdiff
    build/modified/filesystem/usr/lib/libcom_err.so.2.1
    build/modified/filesystem/usr/lib/libext2fs.so.2.4
    build/modified/filesystem/usr/lib/libe2p.so.2.3
    build/modified/filesystem/usr/lib/libuuid.so.1.2
    build/modified/filesystem/usr/lib/libblkid.so.1.0
    build/modified/filesystem/bin/wlancfgctl
    build/modified/filesystem/bin/wlancfgconv
    build/modified/filesystem/bin/led-ctrl
    build/modified/filesystem/lib/librt-0.9.31.1.so
    build/modified/filesystem/lib/libwlanparams.so
    build/modified/filesystem/lib/libdl-0.9.31.1.so
    build/modified/filesystem/lib/libpthread-0.9.31.1.so
    build/modified/filesystem/lib/libtiinterpreter.so.0.0.0
    build/modified/filesystem/lib/libm-0.9.31.1.so
    build/modified/filesystem/lib/libz.so.1.2.3
    build/modified/filesystem/lib/libwcfg.so
    build/modified/filesystem/lib/libcrypt-0.9.31.1.so
    build/modified/filesystem/lib/libled2.so.2.2.0
    build/modified/filesystem/lib/libnsl-0.9.31.1.so
    build/modified/filesystem/lib/ld-uClibc-0.9.31.1.so
    build/modified/filesystem/lib/libuClibc-0.9.31.1.so
done.
Ein Flashen und ein
Code:
modprobe nf-conntrack
bzw.
Code:
modprobe nf-conntrack-ipv4
liefert (wie bereits vorher) ein "not found in modules.dep".
Was kann ich noch versuchen ?
 

olistudent

IPPF-Urgestein
Mitglied seit
19 Okt 2004
Beiträge
14,779
Punkte für Reaktionen
10
Punkte
38
Code:
# CONFIG_NF_CONNTRACK_IPV4 is not set
Musst du das nicht auch auswählen?

Gruß
Oliver
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
Und nf_conntrack hast Du, wie bereits erwähnt, fest im Kernel eingebaut.

Sag mal, liest Du die Antworten hier, oder dient das Ganze nur der Beschäftigung?
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Und nf_conntrack hast Du, wie bereits erwähnt, fest im Kernel eingebaut.

Sag mal, liest Du die Antworten hier, oder dient das Ganze nur der Beschäftigung?
Und wieso liefert das
Code:
modprobe nf-conntrack
ein "module not found" ?
Und wieso laufen einige Regeln (die ich bereits hier) erwähnte nicht, wenn ich auch nf-conntrack-ipv4 nicht mittels
Code:
modprobe nf-conntrack-ipv4
händisch lade ?
Also nochmal deutlich: Ich HABE im make kernel-menuconfig UND im make menuconfig ALLES, was irgendwie mit conntrack in Verbindung steht, ausgewählt.
Beide Module (nf-conntrack und nf-conntrack-ipv4) lassen sich nicht laden und sind, wenn ich den Output von make in meinem letzten Post richtig deute, auch nicht Bestandteil meines Images.
Ergo laufen meine Regeln, welche connection tracking benötigen, auch nicht.
Sag mal, liest Du meine Posts vorher, oder dient das Ganze nur der Beschäftigung?
@ olistudent:
Ich habe im make kernel-menuconfig connection tracking support und im make menuconfig nf-conntrack-ipv4 ausgewählt.
Was im make dabei rauskommt, sieht man ja oben.
Selbst wenn nf-conntrack fest im kernel wäre, sollte es ja unter lsmod auftauchen und damit auch meine Regeln laufen. Was sie nicht tun.
 

olistudent

IPPF-Urgestein
Mitglied seit
19 Okt 2004
Beiträge
14,779
Punkte für Reaktionen
10
Punkte
38
Wenn du nf-conntrack fest in den Kernel einbaust, dann steht es natürlich nicht in der lsmod Ausgabe. (Google mal nach lsmod...)

Ich hab dir oben geschrieben wo sich welche Dateien befinden sollten. Ich hab in deinen Beiträgen nicht gelesen, dass du diesen Hinweisen nachgegangen wärst?

Gruß
Oliver
 

JohnDoe42

Aktives Mitglied
Mitglied seit
17 Mrz 2009
Beiträge
1,416
Punkte für Reaktionen
0
Punkte
38
Ich hab dir oben geschrieben wo sich welche Dateien befinden sollten. Ich hab in deinen Beiträgen nicht gelesen, dass du diesen Hinweisen nachgegangen wärst?

Gruß
Oliver
Der Inhalt von meinem trunk/kernel/modules-ur8-16mb-7270_05.05 ist das hier:
Code:
[email protected]:~/freetz-trunk-r8564/kernel/modules-ur8-16mb-7270_05.05$ ls -al
insgesamt 36
drwxr-xr-x  7 john john 4096 2012-02-05 15:51 .
drwxr-xr-x  4 john john 4096 2012-02-05 15:43 ..
drwxr-xr-x  2 john john 4096 2012-02-05 15:51 crypto
drwxr-xr-x 12 john john 4096 2012-02-05 15:51 drivers
drwxr-xr-x 19 john john 4096 2012-02-05 15:51 fs
drwxr-xr-x  3 john john 4096 2012-02-05 15:51 lib
-rw-r--r--  1 john john    0 2012-02-05 15:51 .modules-ur8
drwxr-xr-x 10 john john 4096 2012-02-05 15:51 net
Wo sollte ich denn da nach den Modulen suchen ?
Der Inhalt von /trunk/make/linux/config.ur-16mb.7270_05.05 stand in Post #13, Nr. 2.
 

RalfFriedl

IPPF-Urgestein
Mitglied seit
22 Apr 2007
Beiträge
12,343
Punkte für Reaktionen
1
Punkte
0
Und wieso liefert das
Code:
modprobe nf-conntrack
ein "module not found" ?
Weil es das Modul nicht gibt. Du hast nf_conntrack fest im Kernel drin, was soll dann noch nachgeladen werden?
Und wieso laufen einige Regeln (die ich bereits hier) erwähnte nicht, wenn ich auch nf-conntrack-ipv4 nicht mittels
Code:
modprobe nf-conntrack-ipv4
händisch lade ?
Weil diese Regeln nf_conntrack_ipv4 benötigen?

Warum hast Du überhaupt einen neuen Thread angefangen, wenn Du schon einen anderen Thread zu dem Thema erstellt hattest? Meinst Du, es wird übersichtlicher, wenn Du es auf zwei Threads verteilst?

Beide Module (nf-conntrack und nf-conntrack-ipv4) lassen sich nicht laden
Wie bereits öfters geschrieben, hast Du nf_conntrack fest im Kernel, es gibt also kein Modul, das geladen werden könnte. Und wie Oliver einige Beiträge weiter oben festgestellt hat, hast Du nf_conntrack_ipv4 nicht ausgewählt, daher wird das Modul nicht erstellt, daher lässt es sich nicht laden. Das sollte beides keine Überraschung sein.
 

poruid

Neuer User
Mitglied seit
5 Aug 2007
Beiträge
95
Punkte für Reaktionen
0
Punkte
0
A question: does anyone know what happens when CONFIG_AVM_PA and CONFIG_GENERIC_CONNTRACK aren't set in the kernels .config? Especially, I would like to know what problems it may cause.
(because my FB7270-v2 is deployed in a production environment doing tests myself is troublesome).
 
3CX

Neueste Beiträge

Statistik des Forums

Themen
235,870
Beiträge
2,066,978
Mitglieder
356,840
Neuestes Mitglied
FH2020