Hallo Forum,
Ich habe nun endlich die Hardware für meinen 2611XM.
Angeschlossen ist er über 2 FXO an unsere Telefonanlage.
Allerdings wird bei der Teilnehmern, hier 2 7940, keine CallerID für die ankommenden Anrufe angezeigt. Das gleich passiert auch wenn ich den Anruf über nen SIP Trunk an den Asterisk schicke.
Könnte mal jemand auf meine Config schauen?
!
! Last configuration change at 10:57:58 MESZ Tue Sep 14 2010 by root
! NVRAM config last updated at 10:57:59 MESZ Tue Sep 14 2010 by root
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CCME
!
boot-start-marker
boot-end-marker
!
no logging console
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxx
!
no aaa new-model
clock timezone MET 1
clock summer-time MESZ recurring
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
!
!
ip domain name xxxxxxx
multilink bundle-name authenticated
!
!
voice rtp send-recv
!
voice service voip
allow-connections sip to sip
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
username xxxxxxxxx password 0 xxxxxxxxx
archive
log config
hidekeys
!
!
ip ssh version 2
!
!
!
!
interface FastEthernet0/0
ip address x.x.x.x 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 x.x.x.x
!
ip http server
no ip http secure-server
!
!
!
control-plane
!
!
!
voice-port 1/0/0
supervisory disconnect dualtone mid-call
cptone DE
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 1000
!
voice-port 1/0/1
supervisory disconnect dualtone mid-call
cptone DE
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 1001
!
!
!
!
!
dial-peer voice 1 voip
destination-pattern 1...
session protocol sipv2
session target ipv4:x.x.x.x
session transport udp
dtmf-relay rtp-nte
codec g711ulaw
clid network-provided
no vad
!
dial-peer voice 2 pots
destination-pattern .T
port 1/0/0
!
!
sip-ua
retry invite 3
retry response 3
retry bye 3
retry cancel 3
timers trying 1000
sip-server ipv4:x.x.x.x
!
!
telephony-service
fxo hook-flash
max-conferences 4 gain -6
transfer-system full-blind
transfer-pattern .T
!
!
line con 0
line aux 0
line vty 0 4
login local
!
ntp clock-period 17208349
ntp server x.x.x.x
!
end
Ich habe nun endlich die Hardware für meinen 2611XM.
Angeschlossen ist er über 2 FXO an unsere Telefonanlage.
Allerdings wird bei der Teilnehmern, hier 2 7940, keine CallerID für die ankommenden Anrufe angezeigt. Das gleich passiert auch wenn ich den Anruf über nen SIP Trunk an den Asterisk schicke.
Könnte mal jemand auf meine Config schauen?
!
! Last configuration change at 10:57:58 MESZ Tue Sep 14 2010 by root
! NVRAM config last updated at 10:57:59 MESZ Tue Sep 14 2010 by root
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CCME
!
boot-start-marker
boot-end-marker
!
no logging console
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxx
!
no aaa new-model
clock timezone MET 1
clock summer-time MESZ recurring
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
!
!
ip domain name xxxxxxx
multilink bundle-name authenticated
!
!
voice rtp send-recv
!
voice service voip
allow-connections sip to sip
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
username xxxxxxxxx password 0 xxxxxxxxx
archive
log config
hidekeys
!
!
ip ssh version 2
!
!
!
!
interface FastEthernet0/0
ip address x.x.x.x 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 x.x.x.x
!
ip http server
no ip http secure-server
!
!
!
control-plane
!
!
!
voice-port 1/0/0
supervisory disconnect dualtone mid-call
cptone DE
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 1000
!
voice-port 1/0/1
supervisory disconnect dualtone mid-call
cptone DE
timeouts call-disconnect 5
timeouts wait-release 5
connection plar 1001
!
!
!
!
!
dial-peer voice 1 voip
destination-pattern 1...
session protocol sipv2
session target ipv4:x.x.x.x
session transport udp
dtmf-relay rtp-nte
codec g711ulaw
clid network-provided
no vad
!
dial-peer voice 2 pots
destination-pattern .T
port 1/0/0
!
!
sip-ua
retry invite 3
retry response 3
retry bye 3
retry cancel 3
timers trying 1000
sip-server ipv4:x.x.x.x
!
!
telephony-service
fxo hook-flash
max-conferences 4 gain -6
transfer-system full-blind
transfer-pattern .T
!
!
line con 0
line aux 0
line vty 0 4
login local
!
ntp clock-period 17208349
ntp server x.x.x.x
!
end
