Labor firmware on FB7170 international annex-a

[Skywave]

I have a Fritzbox 7170 and i would like to install the labor firmware on it, as i would like to setup some sip clients.
I have done some investigating. Would it be possible to change the DSL drivers as mention in this post http://www.ip-phone-forum.de/showpost.php?p=1226880&postcount=146 . Or would it be possible to extract the new sip features from the labor version into the international version.

 

[Skywave]

I have a Fritzbox 7170 and i would like to install the labor firmware on it, as i would like to setup some sip clients.
I have done some investigating. Would it be possible to change the DSL drivers as mention in this post http://www.ip-phone-forum.de/showpost.php?p=1226880&postcount=146 . Or would it be possible to extract the new sip features from the labor version into the international version.

I have tried the howto i mentioned but the map /lib/modules/dsp_ur8/ doesn't exist, probably because it is aimed at the FB 7270. Doesn't somebody know the correct location for the DSL driver of the FB7170?

 

[olistudent]

The name in 7170 firmware is /lib/modules/microvoip-dsl.bin.

Regards
Oliver

 

[Skywave]

The name in 7170 firmware is /lib/modules/microvoip-dsl.bin.

Regards
Oliver

Thanks for the help, but it seems that this method won't work with the FB7170 international. It denies loading up the forum via the webinterface.

 

[olistudent]

I've no clue what you want to load up via the webinterface but it seems to me that you are wrong because we're in Freetz subform. ;-)

Regards
Oliver

 

[gwojtal]

[Edit frank_m24: Mehrere Beiträge zusammengefasst. Man kann seine Beiträge auch editieren. Lies noch mal die Forumregeln.]
Halo Oli,

Ich hab das gemacht. Hab fb7170 International/English/AnnexA. Ich habe ein Image gemacht (58.04.67 EN und neueste Labor). Ich hab aber 2 probleme:

1. In Install datei (var/install) in neues image steht:
# passt der ANNEX ?
accept_annex=B

(ich habe AnnexA)

2. Die Sprache des neues Images steht Deutsch (HW Problem; ich brauche 127 um Image zu benutzen)

Kannst du mir helfen?

[Beitrag 2:]
Aktualisierung:

Ich habe in menuconfig English annex A gewählt...

Freetz aber macht Image als Englisch aber Annex is B...

 

[olistudent]

Wenn du Englisch Annex A wählst, dann kommt ein Annex B Image raus?

MfG Oliver

 

[Skywave]

I see i was on the wrong track. If i change the type from FB7170 to FB7210, i do get an option in "make menuconfig" to change from Annex B to Annex A. But if my modemtype is FB7170, i don't not get such a option in the menu patches.

 

[gwojtal]

Hallo Oli,

ja, genau... ich wähle Annex A in make menuconfig und neue FW ist annex B

 

[olistudent]

Kann ich nicht nachvollziehen. Bei mir kommt da ein Annex A Image raus.

MfG Oliver

 

[gwojtal]

Ich habe noch mal probiert. Und noch einmal Annex B in install file...

Ich habe in make menuconfig das gewählt:
1. fb 7170
2. en - international
3. Annex A

ich wieß nicht was ich schlecht mache (