make: Fehler 2 (mal wieder)

[Herr des Lichts]

Hallo,

Ich habe hier (mal wieder) ein Problem mit dem kompilieren von freetz.
Und zwar habe ich 12/09 ein Image mit AVM (7270_04.80) und freetz (ich glaube trunk 4052) erstellt was problemlos funktionierte und auf drei 7270 läuft.
Nun wollte ich diese alte ".config" für ein aktuelles Trunk (5337) übernehmen.
Vorgehensweise: copy .config_4052 .config, svn up. make menuconfig, speichern. make --> Fehlermeldung: Siehe unten.
Dito mit dirclean und distclean --> Fehlermeldung: Siehe unten
Trunk kpl. neu ausgecheckt --> Fehlermeldung: Siehe unten
Test mit neuer sauberer Config (also nur 7270, 16MB und ein paar Patches/Pakete ausgewählt) --> komplieren geht. Nochmal alte Conig verwendet --> Fehlermeldung: Siehe unten

Somit ist mir schon klar das Problem hängt mit meiner alten .config zusammen. Sieht hier Forum vielleicht einer was das Problem ist, bevor ich wieder anfangen muss die Konfiguration von Hand neu anzulegen.

Achja, die Permissons worauf die Fehlermeldung hindeutet habe ich nochmal geprüft und auch explizit alles rw gesetzt, aber ohne Erfolg.

##########
Achim.Theobald@achim-theobald:/tmp/freetz-trunk> make
---> library/ncurses: preparing... tar -C source/target-mipsel_uClibc-0.9.29 -xzf dl/ncurses-5.7.tar.gz
set -e; shopt -s nullglob; for i in make/libs/patches/*.ncurses.patch; do tools/freetz_patch source/target-mipsel_uClibc-0.9.29/ncurses-5.7 $i; done
applying patch file make/libs/patches/110-configure.ncurses.patch
File configure is read-only; refusing to patch
1 out of 1 hunk ignored -- saving rejects to file configure.rej
----------------------------------------------------------------------
ERROR: modpatch: Error in patch-file make/libs/patches/110-configure.ncurses.patch
make: *** [source/target-mipsel_uClibc-0.9.29/ncurses-5.7/.unpacked] Fehler 2

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_04_80=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5124 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
FREETZ_TYPE_FON_WLAN_7270=y
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_FON_WLAN_7570 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_WLAN_3270_V3 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_FON_WLAN_7270_16MB=y
FREETZ_TYPE_LABOR=y
# FREETZ_TYPE_LABOR_CORE is not set
# FREETZ_TYPE_LABOR_DSL is not set
# FREETZ_TYPE_LABOR_IPV6 is not set
FREETZ_TYPE_PREVIEW=y
# FREETZ_TYPE_ALIEN_HARDWARE is not set
FREETZ_AVM_VERSION_STRING="7270_04.80"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270_preview"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
# FREETZ_SHOW_ADVANCED is not set
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Web menu patches ------------------------
#
# FREETZ_PATCH_VCC is not set
FREETZ_PATCH_DSL_EXPERT=y
# FREETZ_ADD_REGEXT_GUI is not set
FREETZ_PATCH_ALARMCLOCK=y
FREETZ_PATCH_SIGNED=y

#
# USB mounting ----------------------------
#
FREETZ_PATCH_FREETZMOUNT=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT2=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTOMOUNT_NTFS=y
# FREETZ_AUTOMOUNT_REISER_FS is not set
FREETZ_PATCH_MAXDEVCOUNT=y

#
# Removings -------------------------------
#
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_NAS is not set

#
# Remove brandings
#
FREETZ_REMOVE_BRANDING_1und1=y
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_REMOVE_DECT is not set
# FREETZ_REMOVE_DTRACE is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_NTFS is not set
# FREETZ_REMOVE_RUNCLOCK is not set
# FREETZ_REMOVE_SUPPORT is not set
# FREETZ_REMOVE_UMTSD is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set

#
# Adds -----------------------------------
#
# FREETZ_ADD_ANNEX_A_FIRMWARE is not set

#
# Other stuff -----------------------------
#
# FREETZ_PATCH_GETCONS is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_AICCU is not set
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
FREETZ_PACKAGE_BRIDGE_UTILS=y
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
FREETZ_PACKAGE_CIFSMOUNT=y
FREETZ_PACKAGE_CPMACCFG=y
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DNSMASQ is not set
FREETZ_PACKAGE_DROPBEAR=y
# FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY is not set
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FUSE=y
FREETZ_PACKAGE_INETD=y
FREETZ_PACKAGE_KNOCK=y
FREETZ_PACKAGE_MC=y
FREETZ_PACKAGE_MC_INTERNAL_EDITOR=y
FREETZ_PACKAGE_MC_SUBSHELL=y
FREETZ_PACKAGE_MC_ONLINE_HELP=y
# FREETZ_PACKAGE_MC_WITH_NCURSES is not set
# FREETZ_PACKAGE_MC_FORCE_GLIB12 is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NC6 is not set
FREETZ_PACKAGE_NETSNMP=y
FREETZ_PACKAGE_NETSNMP_WITH_OPENSSL=y
FREETZ_PACKAGE_NETSNMP_WITH_ZLIB=y
FREETZ_PACKAGE_NFS_UTILS=y
FREETZ_PACKAGE_NTFS=y
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
FREETZ_PACKAGE_PORTMAP=y
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RADVD is not set
# FREETZ_PACKAGE_RCAPID is not set
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
FREETZ_PACKAGE_VNSTAT=y
FREETZ_PACKAGE_VNSTAT_DAEMON=y
FREETZ_PACKAGE_VNSTAT_IMAGE=y
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set
# FREETZ_PACKAGE_XMAIL is not set

#
# Web interfaces
#
FREETZ_PACKAGE_AVM_FIREWALL=y
FREETZ_PACKAGE_CPMACCFG_CGI=y
# FREETZ_PACKAGE_DOWNLOADER is not set
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_NFSD_CGI=y
# FREETZ_PACKAGE_NHIPT is not set
FREETZ_PACKAGE_ONLINECHANGED_CGI=y
# FREETZ_PACKAGE_PHPXMAIL is not set
# FREETZ_PACKAGE_PPP_CGI is not set
FREETZ_PACKAGE_RRDSTATS=y
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
FREETZ_PACKAGE_VNSTAT_CGI=y
# FREETZ_PACKAGE_WOL_CGI is not set

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
FREETZ_PACKAGE_BASH=y
# FREETZ_PACKAGE_BASH_MINIMAL is not set
FREETZ_PACKAGE_BASH_READLINE=y
FREETZ_PATCH_BASH_LOGIN_SHELL=y
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BITTWIST is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
FREETZ_PACKAGE_CRYPTSETUP=y
FREETZ_CRYPTSETUP_LOOP=y
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
FREETZ_PACKAGE_DOSFSTOOLS=y
FREETZ_PACKAGE_DOSFSTOOLS_DOSFSCK=y
FREETZ_PACKAGE_DOSFSTOOLS_DOSFSLABEL=y
FREETZ_PACKAGE_DOSFSTOOLS_MKDOSFS=y
# FREETZ_PACKAGE_DTACH is not set
FREETZ_PACKAGE_E2FSPROGS=y
FREETZ_PACKAGE_E2FSPROGS_STATIC=y
FREETZ_PACKAGE_E2FSPROGS_E2FSCK=y
FREETZ_PACKAGE_E2FSPROGS_E2MAKING=y
FREETZ_PACKAGE_E2FSPROGS_E2TUNING=y
# FREETZ_PACKAGE_E2FSPROGS_E2DEBUG is not set
FREETZ_PACKAGE_E2FSPROGS_BLKID=y
FREETZ_PACKAGE_E2FSPROGS_E2FIXING=y
# FREETZ_PACKAGE_EMPTY is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GIT is not set
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_GNUTLS is not set
# FREETZ_PACKAGE_GOCR is not set
FREETZ_PACKAGE_HD_IDLE=y
# FREETZ_PACKAGE_HOL is not set
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTTPRY is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_IGMPPROXY is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPSEC_TOOLS is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LFTP is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
FREETZ_PACKAGE_MICROPERL=y
FREETZ_PACKAGE_MICROPERL_MODULES=""
# FREETZ_PACKAGE_MINI_SNMPD is not set
# FREETZ_PACKAGE_MINICOM is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NCFTP is not set
# FREETZ_PACKAGE_NETPBM is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_OIDENTD is not set
# FREETZ_PACKAGE_OPENCONNECT is not set
# FREETZ_PACKAGE_OPENDD is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_SSHD is not set
# FREETZ_PACKAGE_OPENSSH_CLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SCP is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_SFTPCLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_PPPD_CHAT is not set
# FREETZ_PACKAGE_QUAGGA is not set
FREETZ_PACKAGE_RRDTOOL=y
FREETZ_PACKAGE_RSYNC=y
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SIPROXD is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLANG is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SPAWN_FCGI is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SUBVERSION is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
FREETZ_PACKAGE_TCP_WRAPPERS=y
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_TRICKLE is not set
# FREETZ_PACKAGE_TMUX is not set
# FREETZ_PACKAGE_UMURMUR is not set
# FREETZ_PACKAGE_UNRAR is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_VTUN is not set
FREETZ_PACKAGE_WGET=y
# FREETZ_PACKAGE_WGET_WITH_SSL is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_PACKAGE_XSLTPROC is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_KERNEL_SITE="@AVM/fritz.box/fritzbox.fon_wlan_7270/x_misc/opensrc"
FREETZ_DL_KERNEL_SOURCE="fritzbox7270-source-files-04.80.tar.gz"
FREETZ_DL_KERNEL_SOURCE_MD5="bcd49b28a54293e1481b8170b07245e0"
FREETZ_DL_SOURCE="Labor_FRITZ.Box_Fon_WLAN_7270_v2.54.04.85-17941.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_ATOMPHIL is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_HANSOLO is not set
# FREETZ_BACKUP_CONFIG_CACHE is not set
# FREETZ_CHECK_CHANGED is not set
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_262144 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_524288 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_1048576 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_BZIP2 is not set
# FREETZ_BUSYBOX_CHGRP is not set
# FREETZ_BUSYBOX_FEATURE_DD_IBS_OBS is not set
# FREETZ_BUSYBOX_DIFF is not set
# FREETZ_BUSYBOX_DOS2UNIX is not set
# FREETZ_BUSYBOX_ETHER_WAKE is not set
# FREETZ_BUSYBOX_FANCY_KEYS is not set
# FREETZ_BUSYBOX_FUSER is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_LONG_OPTS is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
FREETZ_BUSYBOX_MD5SUM=y
# FREETZ_BUSYBOX_MDEV is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
FREETZ_BUSYBOX_NICE=y
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_PSCAN is not set
FREETZ_BUSYBOX_REALPATH=y
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_SHA1SUM is not set
# FREETZ_BUSYBOX_SPLIT is not set
FREETZ_BUSYBOX_START_STOP_DAEMON=y
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UNIX2DOS is not set
# FREETZ_BUSYBOX_UNZIP is not set
# FREETZ_BUSYBOX_FEATURE_USERNAME_COMPLETION is not set
# FREETZ_BUSYBOX_VOLUMEID is not set
# FREETZ_BUSYBOX_WHOAMI is not set

#
# IPv6 Options
#
# FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS is not set
# FREETZ_BUSYBOX_PING6 is not set
# FREETZ_BUSYBOX_TRACEROUTE6 is not set

#
# Kernel modules
#

#
# block
#

#
# crypto
#
FREETZ_MODULE_crypto_algapi=y
# FREETZ_MODULE_aes is not set
# FREETZ_MODULE_arc4 is not set
FREETZ_MODULE_blkcipher=y
FREETZ_MODULE_cbc=y
FREETZ_MODULE_cryptomgr=y
# FREETZ_MODULE_sha1 is not set
FREETZ_MODULE_sha256=y
# FREETZ_MODULE_hmac is not set
# FREETZ_MODULE_crypto_null is not set
# FREETZ_MODULE_md5 is not set
# FREETZ_MODULE_des is not set
# FREETZ_MODULE_blowfish is not set
# FREETZ_MODULE_twofish is not set

#
# drivers
#
FREETZ_MODULE_loop=y
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_musb_hdrc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
FREETZ_MODULE_usbcore=y
FREETZ_MODULE_usbip=y
FREETZ_MODULE_usbip_common_mod=y
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
FREETZ_MODULE_hci_usb=y
FREETZ_MODULE_bfusb=y
FREETZ_MODULE_firmware_class=y
FREETZ_MODULE_dm_mod=y
FREETZ_MODULE_dm_crypt=y
# FREETZ_MODULE_option is not set

#
# fs
#
FREETZ_MODULE_cifs=y
# FREETZ_MODULE_coda is not set
FREETZ_MODULE_ext3=y
FREETZ_MODULE_ext2=y
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
FREETZ_MODULE_jbd=y
FREETZ_MODULE_lockd=y
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
# FREETZ_MODULE_nfs is not set
FREETZ_MODULE_nls_cp437=y
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
FREETZ_MODULE_nls_iso8859_1=y
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
FREETZ_MODULE_reiserfs=y
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
FREETZ_MODULE_mbcache=y

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set
# FREETZ_MODULE_lzo_compress is not set
# FREETZ_MODULE_lzo_decompress is not set

#
# net
#
FREETZ_MODULE_bluetooth=y
FREETZ_MODULE_bnep=y
# FREETZ_MODULE_ipv6 is not set
FREETZ_MODULE_l2cap=y
FREETZ_MODULE_rfcomm=y
FREETZ_MODULE_sunrpc=y
# FREETZ_MODULE_xfrm_user is not set
# FREETZ_MODULE_ah4 is not set
# FREETZ_MODULE_esp4 is not set
# FREETZ_MODULE_ah6 is not set
# FREETZ_MODULE_esp6 is not set
# FREETZ_MODULE_af_key is not set
# FREETZ_MODULE_xfrm4_tunnel is not set
# FREETZ_MODULE_xfrm6_tunnel is not set
# FREETZ_MODULE_ipcomp is not set
# FREETZ_MODULE_ipcomp6 is not set
# FREETZ_MODULE_ip_gre is not set
# FREETZ_MODULE_sch_cbq is not set
# FREETZ_MODULE_cls_u32 is not set

#
# Shared libraries
#

#
# Libraries -------------------------------
#
# FREETZ_LIB_libapr is not set
# FREETZ_LIB_libaprutil is not set
# FREETZ_LIB_libdb is not set
# FREETZ_LIB_libbluetooth is not set
FREETZ_LIB_libcapi20=y

#
# Crypto & SSL
#

#
# GMP ------------------------------------
#
# FREETZ_LIB_libgmp is not set

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libpolarssl is not set
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y

#
# GnuTLS ---------------------------------
#
# FREETZ_LIB_libgnutls is not set
# FREETZ_LIB_libtasn1 is not set

#
# Data compression
#
FREETZ_LIB_liblzo2=y
FREETZ_LIB_libz=y
FREETZ_LIB_libgcc_s=y

#
# GLib
#
FREETZ_LIB_libglib_1=y
FREETZ_LIB_libglib_2=y
# FREETZ_LIB_libgio_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# Graphics & fonts
#
FREETZ_LIB_libfreetype=y
FREETZ_LIB_libart_lgpl_2=y
FREETZ_LIB_libjpeg=y
FREETZ_LIB_libpng12=y
FREETZ_LIB_libgd=y
# FREETZ_LIB_libnetpbm is not set
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libconfig is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libdaemon is not set
FREETZ_LIB_libdevmapper=y
# FREETZ_LIB_libdnet is not set
# FREETZ_LIB_libelf is not set
FREETZ_LIB_libevent=y
# FREETZ_LIB_libftdi is not set
FREETZ_LIB_libfreetz=y
FREETZ_LIB_libfuse=y
FREETZ_LIB_libiconv=y
# FREETZ_LIB_libid3tag is not set
FREETZ_LIB_libintl=y
# FREETZ_LIB_liblua is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libnet is not set
# FREETZ_LIB_libopenobex is not set
# FREETZ_LIB_libosip2 is not set
# FREETZ_LIB_libosipparser2 is not set
FREETZ_LIB_libpcap=y
FREETZ_LIB_libpcre=y
# FREETZ_LIB_libpcreposix is not set
FREETZ_LIB_libpopt=y
# FREETZ_LIB_libslang is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libsynce is not set
FREETZ_LIB_libsysfs=y
# FREETZ_LIB_libltdl is not set
FREETZ_LIB_libusb=y

#
# ncurses
#
FREETZ_LIB_libncurses=y

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
FREETZ_SHARE_terminfo=y
# FREETZ_SHARE_terminfo_showall is not set
FREETZ_SHARE_terminfo_ansi=y
FREETZ_SHARE_terminfo_gnome=y
FREETZ_SHARE_terminfo_konsole=y
FREETZ_SHARE_terminfo_linux=y
FREETZ_SHARE_terminfo_putty=y
FREETZ_SHARE_terminfo_rxvt=y
FREETZ_SHARE_terminfo_screen=y
FREETZ_SHARE_terminfo_screenMINUSw=y
FREETZ_SHARE_terminfo_sun=y
FREETZ_SHARE_terminfo_vt100=y
FREETZ_SHARE_terminfo_vt102=y
FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
FREETZ_SHARE_terminfo_vt102MINUSw=y
FREETZ_SHARE_terminfo_vt200=y
FREETZ_SHARE_terminfo_vt220=y
FREETZ_SHARE_terminfo_vt52=y
FREETZ_SHARE_terminfo_xterm=y
FREETZ_SHARE_terminfo_xtermMINUScolor=y
FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set

#
# Ogg/Vorbis
#
# FREETZ_LIB_libogg is not set
# FREETZ_LIB_libvorbis is not set
# FREETZ_LIB_libvorbisenc is not set
# FREETZ_LIB_libvorbisfile is not set

#
# Readline
#
FREETZ_LIB_libreadline=y
FREETZ_LIB_libhistory=y

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
# FREETZ_LIB_libuClibc__ is not set

#
# XML/XSLT
#
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libxml2 is not set
# FREETZ_LIB_libxslt is not set
# FREETZ_LIB_libexslt is not set

#
# Compiler options
#
# FREETZ_DOWNLOAD_TOOLCHAIN is not set
FREETZ_BUILD_TOOLCHAIN=y
FREETZ_TARGET_ARCH="mipsel"
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_KERNEL_VERSION_2_6_13_1 is not set
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
FREETZ_UCLIBC_0_9_29_BASED_BOX=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_UCLIBC_VERSION_0_9_31 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_5_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_4_4_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_5_UCLIBC_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_4_4_UCLIBC_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_4_4_UCLIBC_0_9_31 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_CONFIG_MOD=y
# FREETZ_TARGET_UCLIBC_CONFIG_8MB is not set
# FREETZ_TARGET_UCLIBC_CONFIG_4MB is not set
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_COMPILER_GCC_3_4_6=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.18"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

 

[gismotro]

Kommt der Fehler auch wenn Du die .config nicht ersetzt ?

Ich denke das deine .config zu alt ist und das da durch das bauen des Image fehlschlägt.

Edit: Sehe gerade das Du die Vermutung schon selber gefunden hast. Bau sie einfach neu.

 

[colonia27]

So ist es nunmal mit dem trunk (wobei in dem Fall auch für stable Versionen)
Was vor ca. 1300 checkpoints lief muss ja jetzt nicht mehr greifen.
Ich behaupte mal frech, daß ein manuelles Aktivieren der Punkte im menuconfig nicht so lange dauert wie das Verfassen deines Posts

 

[sf3978]

[...]
Vorgehensweise: copy .config_4052 .config, svn up. make menuconfig, speichern. make --> Fehlermeldung: Siehe unten.
[...]

Warum hast Du noch "svn up" gemacht, wenn Du neu ausgecheckt hast?

 

[RalfFriedl]

make: Fehler 2 (mal wieder)

Es gibt einen Grund, warum diese Meldung immer wieder kommt, und warum sie als Titel absolut unsinnig ist: Damit teilt Make mit, daß bei den weiter oben ausgeführten Kommandos ein Fehler aufgetreten ist. Es ist somit genauso sinnvoll, wie einfach zu schreiben "Fehler". Wo genau das Problem liegt, sieht man an der Zeilen, die darüber stehen.

Achja, die Permissons worauf die Fehlermeldung hindeutet habe ich nochmal geprüft und auch explizit alles rw gesetzt, aber ohne Erfolg.

Die Permissions von was genau?

 

[schmatke]

---> library/ncurses: preparing... tar -C source/target-mipsel_uClibc-0.9.29  -xzf dl/ncurses-5.7.tar.gz
set -e; shopt -s nullglob; for i in make/libs/patches/*.ncurses.patch; do tools/freetz_patch source/target-mipsel_uClibc-0.9.29/ncurses-5.7 $i; done
applying patch file make/libs/patches/110-configure.ncurses.patch
File configure is read-only; refusing to patch
1 out of 1 hunk ignored -- saving rejects to file configure.rej
----------------------------------------------------------------------
ERROR: modpatch: Error in patch-file make/libs/patches/110-configure.ncurses.patch

Reproduzierbar, sobald ich deco oder mc auswähle. Wie kann ich mein ncurses-Problem beheben?

diff .config .config-old
167c167
< FREETZ_PACKAGE_DECO=y
---
> # FREETZ_PACKAGE_DECO is not set
886c886
< FREETZ_LIB_libncurses=y
---
> # FREETZ_LIB_libncurses is not set
895,915c895
< FREETZ_SHARE_terminfo=y
< # FREETZ_SHARE_terminfo_showall is not set
< FREETZ_SHARE_terminfo_ansi=y
< FREETZ_SHARE_terminfo_gnome=y
< FREETZ_SHARE_terminfo_konsole=y
< FREETZ_SHARE_terminfo_linux=y
< FREETZ_SHARE_terminfo_putty=y
< FREETZ_SHARE_terminfo_rxvt=y
< FREETZ_SHARE_terminfo_screen=y
< FREETZ_SHARE_terminfo_screenMINUSw=y
< FREETZ_SHARE_terminfo_sun=y
< FREETZ_SHARE_terminfo_vt100=y
< FREETZ_SHARE_terminfo_vt102=y
< FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
< FREETZ_SHARE_terminfo_vt102MINUSw=y
< FREETZ_SHARE_terminfo_vt200=y
< FREETZ_SHARE_terminfo_vt220=y
< FREETZ_SHARE_terminfo_vt52=y
< FREETZ_SHARE_terminfo_xterm=y
< FREETZ_SHARE_terminfo_xtermMINUScolor=y
< FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
---
> # FREETZ_SHARE_terminfo is not set

 

[olistudent]

Kannst du mal bitte in deinem ncurses-5.7.tar.gz Archiv schauen welche Flags das configure Skript hat?

MfG Oliver

 

[schmatke]

ncurses-5.7.tar.gz

Danke für die schnelle Hilfe.
Volltreffer, aber stand ja auch schon geschrieben... read-only

Betrifft dann auch noch misc/terminfo.src, danach läufts durch.

Edit:
Warum sich ncurses-5.7.tar.gz von ncurses-5.6.tar.gz so unterscheidet, ist mir jedoch nicht ganz klar.

schmatke@lindose1:~/fritz/freetz-trunk/dl> ls -lh ncurses-5.6
insgesamt 1,4M
-rw-r--r-- 1 schmatke users 141K 17. Dez 2006  aclocal.m4
drwxr-xr-x 5 schmatke users 4,0K 18. Dez 2006  Ada95
-rw-r--r-- 1 schmatke users  23K 18. Dez 2006  ANNOUNCE
-rw-r--r-- 1 schmatke users  25K 18. Dez 2006  announce.html.in
-rw-r--r-- 1 schmatke users 2,5K 28. Okt 2006  AUTHORS
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  c++
-rwxr-xr-x 1 schmatke users  44K 22. Jul 2006  config.guess
-rwxr-xr-x 1 schmatke users  32K 14. Aug 2006  config.sub
-rwxr-xr-x 1 schmatke users 448K 17. Dez 2006  configure
-rw-r--r-- 1 schmatke users  47K 17. Dez 2006  configure.in
-rw-r--r-- 1 schmatke users 4,8K 23. Apr 2006  convert_configure.pl
-rw-r--r-- 1 schmatke users 6,8K 17. Dez 2006  dist.mk
drwxr-xr-x 3 schmatke users 4,0K 18. Dez 2006  doc
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  form
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  include
-rw-r--r-- 1 schmatke users  63K 17. Dez 2006  INSTALL
-rwxr-xr-x 1 schmatke users 5,5K 22. Jun 2001  install-sh
-rw-r--r-- 1 schmatke users 3,9K 29. Jan 2005  Makefile.in
-rw-r--r-- 1 schmatke users 8,6K 22. Apr 2006  Makefile.os2
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  man
-rw-r--r-- 1 schmatke users  31K 26. Nov 2006  MANIFEST
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  menu
drwxr-xr-x 3 schmatke users 4,0K 18. Dez 2006  misc
-rw-r--r-- 1 schmatke users 4,1K 22. Jan 2005  mk-0th.awk
-rw-r--r-- 1 schmatke users  14K  8. Okt 2006  mk-1st.awk
-rw-r--r-- 1 schmatke users 5,2K 22. Jan 2005  mk-2nd.awk
-rwxr-xr-x 1 schmatke users  838 29. Jun 2002  mkinstalldirs
drwxr-xr-x 7 schmatke users 4,0K 18. Dez 2006  ncurses
-rw-r--r-- 1 schmatke users 370K 17. Dez 2006  NEWS
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  panel
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  progs
-rw-r--r-- 1 schmatke users 9,7K 23. Apr 2006  README
-rw-r--r-- 1 schmatke users 3,9K 23. Apr 2006  README.emx
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  tack
-rwxr-xr-x 1 schmatke users 3,0K 25. Okt 2003  tar-copy.sh
drwxr-xr-x 2 schmatke users 4,0K 18. Dez 2006  test
-rw-r--r-- 1 schmatke users 9,0K 28. Okt 2006  TO-DO
schmatke@lindose1:~/fritz/freetz-trunk/dl> ls -lh ncurses-5.7
insgesamt 1,5M
-r--r--r-- 1 schmatke users 160K 26. Okt 2008  aclocal.m4
drwxr-xr-x 5 schmatke users 4,0K  3. Nov 2008  Ada95
-r--r--r-- 1 schmatke users  23K  2. Nov 2008  ANNOUNCE
-r--r--r-- 1 schmatke users  24K  2. Nov 2008  announce.html.in
-r--r--r-- 1 schmatke users 2,5K 28. Okt 2006  AUTHORS
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  c++
-r-xr-xr-x 1 schmatke users  44K 30. Aug 2008  config.guess
-r-xr-xr-x 1 schmatke users  33K 30. Aug 2008  config.sub
-rwxr-xr-x 1 schmatke users 489K 26. Okt 2008  configure
-r--r--r-- 1 schmatke users  55K 18. Okt 2008  configure.in
-r--r--r-- 1 schmatke users 4,8K 23. Apr 2006  convert_configure.pl
-r--r--r-- 1 schmatke users 7,1K  2. Nov 2008  dist.mk
drwxr-xr-x 3 schmatke users 4,0K  3. Nov 2008  doc
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  form
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  include
-r--r--r-- 1 schmatke users  70K  2. Nov 2008  INSTALL
-r-xr-xr-x 1 schmatke users 7,0K 29. Nov 2003  install-sh
-r--r--r-- 1 schmatke users 3,9K 29. Jan 2005  Makefile.in
-r--r--r-- 1 schmatke users 8,6K 22. Apr 2006  Makefile.os2
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  man
-r--r--r-- 1 schmatke users  31K 26. Okt 2008  MANIFEST
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  menu
drwxr-xr-x 3 schmatke users 4,0K  3. Nov 2008  misc
-r--r--r-- 1 schmatke users 4,1K 22. Jan 2005  mk-0th.awk
-r--r--r-- 1 schmatke users  16K 24. Mär 2007  mk-1st.awk
-r--r--r-- 1 schmatke users 5,2K 22. Jan 2005  mk-2nd.awk
-r-xr-xr-x 1 schmatke users 1,3K 26. Mär 2007  mkdirs.sh
-r--r--r-- 1 schmatke users 4,0K 31. Mär 2007  mk-hdr.awk
drwxr-xr-x 7 schmatke users 4,0K  3. Nov 2008  ncurses
-r--r--r-- 1 schmatke users 407K  2. Nov 2008  NEWS
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  panel
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  progs
-r--r--r-- 1 schmatke users 9,7K 23. Apr 2006  README
-r--r--r-- 1 schmatke users 3,9K 23. Apr 2006  README.emx
-r-xr-xr-x 1 schmatke users 3,0K 25. Okt 2003  tar-copy.sh
drwxr-xr-x 2 schmatke users 4,0K  3. Nov 2008  test
-r--r--r-- 1 schmatke users 9,4K 11. Okt 2008  TO-DO
schmatke@lindose1:~/fritz/freetz-trunk/dl>

Edit2:
Ich habe mir das Paket nochmal von ftp://ftp.gnu.org/gnu/ncurses/ gezogen.
Ergebnis:

diff test1 test2
10c10
< -r-xr-xr-x 1 schmatke users 489K 26. Okt 2008  configure
---
> -rwxr-xr-x 1 schmatke users 489K 26. Okt 2008  configure
65c65
< -r--r--r-- 1 schmatke users 928K 13. Okt 2008  terminfo.src
---
> -rwxr-xr-x 1 schmatke users 928K 13. Okt 2008  terminfo.src

 

[olistudent]

Was heißt das jetzt? Im aktuellen Download ist das Problem gefixt? Haben die die Datei geändert? Dann müsste ich mal auf unseren Mirrors schauen was dort ist. Wobei ja der md5-Check meckern sollte, wenn sich da was ändert.

MfG Oliver

 

[sf3978]

Der aktuelle trunk hat mit diesen Rechten:

[B]-r-xr-xr-x[/B] 1 gm users 500724 13. Aug 18:08 configure
[B]-r--r--r--[/B] 1 gm users 946140 13. Aug 18:08 terminfo.src

kein Problem.

 

[schmatke]

ncurses-5.7.tar.gz

Ich habe das jetzt nochmal durchgespielt.
Heisst:

- svn co http://svn.freetz.org/trunk freetz-trunk
- mein dl-Ordner (ohne ncurses-5.7.tar.gz) plaziert
- frisch gebaut - gleicher Fehler
- chmod 755 für configure und terminfo.src

Das Ganze unter opensuse 11.3 x64.

 

[sf3978]

Mit OpenSUSE 11.2, linux32 bash geht es bei mir:

:~/myfreetz/[B]freetz5494[/B]/freetz-trunk> library/ncurses: preparing... tar -C source/target-mipsel_uClibc-0.9.29  -xzf [B]dl/ncurses-5.7.tar.gz[/B]
set -e; shopt -s nullglob; for i in make/libs/patches/*.ncurses.patch; do tools/freetz_patch source/target-mipsel_uClibc-0.9.29/ncurses-5.7 $i; done
[B]applying patch file make/libs/patches/110-configure.ncurses.patch
patching file configure
----------------------------------------------------------------------
applying patch file make/libs/patches/120-no_cancelled_strings_in_terminfo.ncurses.patch
patching file misc/terminfo.src[/B]
----------------------------------------------------------------------
configuring... (conf_cmd() { ./configure  "$@"  || { printf "\n\\033[33m%s\\033[m\n" "ERROR: Build failed.";  exit 1; } }; cd source/target-mipsel_uClibc-0.9.29/ncurses-5.7;   rm -f config.{cache,status} ;    PATH=""/home/gm/myfreetz/freetz5494/freetz-trunk/toolchain/target/bin:/home/gm/myfreetz/freetz5494/freetz-trunk/toolchain/kernel/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin""

 

[schmatke]

Was mir grad noch auffällt, es betrifft auch:

lsof_4.83_src/lib/Makefile.skel
lsof_4.83_src/print.c
lsof_4.83_src/Configure
lsof_4.83_src/dialects/linux/machine.h

 

[sf3978]

Auch "lsof" funktioniert bei mir ohne Schreibrechte.

 

[schmatke]

Ich glaubs Dir. Ich muss aber Rechte zugestehen. :-(
Egal, ich kann MIR guten Gewissens Rechte zugestehen... ;-)

 

[olistudent]

@sf3978
Hast du eine Idee warum das bei dir ohne Schreibberechtigung trotzdem nicht zu Problemen führt?

MfG Oliver

 

[RalfFriedl]

Vermutlich eine andere Version des Patch-Programms, die sich nicht daran stört.

 

[sf3978]

:~> patch -v
patch [B]2.5.9-122-gba37782[/B]
Copyright (C) 1988 Larry Wall
Copyright (C) 2003 Free Software Foundation, Inc.

This program comes with NO WARRANTY, to the extent permitted by law.
You may redistribute copies of this program
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.

written by Larry Wall and Paul Eggert

 

[er13]

Die Änderungen in der letzten Patch-Version scheinen wohl die Ursache für das Problem zu sein. Lösungen gäbe zwei: entweder patch mit --force aufrufen oder PKG_UNPACK__INT um ein chmod -R u+w $($(PKG)_DIR) erweitern

 

[RalfFriedl]

Ich bin für "--force", oder für "--batch --forward".
Das chmod kann bei vielen Dateien lange dauern und ist bei den meisten Paketen unnötig.