N870(E)/N670/N610 - Neues Firmware Release 2.6x.x

[koni2222]

Release Date:​

• November 2024
  

What is new?​

• New, secure client certificate (provisioning)
• When the first time installing an Virtual integrator you need to enter an Activation code
• 

CODE: EFA237

Improvements​

• Calls with URI are not properly stored as missed and outgoing calls
• N610 Int. Tel.: Provisioning pop up not OK
• Additional hold option
• GAP handset: play (immediately) "ready to dial" tone after off-hook for outgoing call
• [Broadsoft] Invite Failover, Failback, Bye Failover.

Bugfixes​

• Loss of SIP connections, loss of calls - sip-control terminated
• DTMF RFC2833 - Wrong Payload Type when the codec list is duplicated
• After power outage system becomes unusable
• No reverse lookup done for transfered calls (IVR, Huntgroup etc.)
• <param name="AreaCodes.0.Wildcarding" value="1" /> not working

Known Issues​

• ..

https://teamwork.gigaset.com/gigawiki/display/GPPPO/Release+2.61.0

 

[koni2222]

Release 2.61.2​

• 
  
• 
  
• 
  

Release Date:​

• February 2025

Bugfixes​

• SIP control terminated fix
• Synchronization mode is set from LAN to DECT for a short time when dlsd reports aysnc

https://teamwork.gigaset.com/gigawiki/display/GPPPO/Release+2.61.2

 

[Chromagraph]

Release 2.62.1​

N870/N670/N610 + Elmeg DECT 160​

• Client certificates show on security page including Details button
• DECT handset bulk editor
• R700H/S700H function key short or long press send via MQTT to server
• TR-069 is implemented (Available on Request as TR-069 needs to be tested with the customer management system)
• Mutiple named accounts
• N610: 8 DECT handsets / 8 SIP accounts →
  20 DECT handsets/ 20 SIP accounts (Internal telephony disabled)
  20 DECT handsets/ 8 SIP accounts (Internal telephony enabled)

Release Date:

• May 2025

Improvements:

• Broadsoft Fail-over/Fallback
• DECT handsets, Firmware column
  • Show the full software string
  • Sorting is possible
  • Searching is possible
• MQTT Response when Alarm cannot reach handset
• N610/N670: Enable internal telephony via provisioning
• Add possibility to select Sip account name source on handset display
• R700 protect added to Auerswald variant whitelist

Bugfixes:

• AML: Handsets in alarm group not receiving message when a HS is not registered on DECT
• SIP Account for provisioning does not trigger any events when receiving check sync
• No registration fail-over if 503 has Retry-After
• 3CX call-waiting

https://teamwork.gigaset.com/gigawiki/display/GPPPO/Release+2.62.1