.titleBar { margin-bottom: 5px!important; }

Neue Firmware SPA-942 V5.1.4 vom 31.10.2006

Dieses Thema im Forum "Linksys (VoIP)" wurde erstellt von Ponozka, 29 Nov. 2006.

  1. Ponozka

    Ponozka Neuer User

    Registriert seit:
    1 Mai 2006
    Beiträge:
    139
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    Ingenieur / CEO
    Ort:
    Neuhäusl, BY
    Auch für das SPA-942 gibt es hier eine neue Firmware. Leider ohne Release Notes!
     
  2. cellvie

    cellvie Neuer User

    Registriert seit:
    5 Juli 2006
    Beiträge:
    11
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Release Notes for -- Linksys SPA-922/942 5.1.4

    Die Release Notes finden sich lustigerweise unter "Drivers" auf der Linksys Website. Hier sind sie:


    Release Notes for -- Linksys SPA-922/942 5.1.4

    922 -- IP Phone
    942 -- IP Phone

    Copyright (C) 2006 by Linksys, a Division of Cisco Systems, Inc.

    All Rights Reserved.

    * * * * * * * * * * IMPORTANT * * * * * * * * * * * * * * * * *
    * Use of Proprietary Information and Copyright Notice: *
    * This release note document contains proprietary information *
    * that is to be used only by Sipura Technology, Linksys(R), *
    * and Cisco Systems, Inc. customers. Any unauthorized *
    * disclosure, copying, distribution, or use of this *
    * information is prohibited. This restriction includes *
    * ALL Internet based discussion forums, e.g. DSLreports. *
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


    ========================================
    New Features
    ========================================



    ### version: 5.1.4

    - Updated SIP-B implementation

    - Shared line can accept and make call before subscribe complete

    ### version: 5.1.0

    - Added <Auth INVITE> option for Line 1/2 to enable challenging incoming initial INVITE requests

    - Three parameters are added:
    <Reg Retry Random Delay> = Random delay range (in seconds) to add to <Register Retry Intvl> when retrying REGISTER after a failure. Default is 0, which disables this feature

    <Reg Retry Long Random Delay> = Random delay range (in seconds) to add to <Register Retry Long Intvl> when retrying REGISTER after a failure. Default is 0, which disables this feature

    <Reg Retry Intvl Cap> = The maximum value to cap the expoential backoff retry delay (which starts at <Register Retry Intvl> and doubles every retry. Default value is 0, which disables the exponential backoff feature (i.e., error retry interval is always at <Register Retry Intvl>). If this feature is enabled, <Reg Retry Random Delay> is added on top of the exponential backoff delay value



    ========================================
    Bug Fixes
    ========================================


    ### version: 5.1.4

    - Fixed this bug: NOTIFY request for refer event during call transfer does not include subscription-state header that is required per RFC 3265

    - Fixed this bug: SPA does not include RTP-Stat header in BYE after the BYE is challenged

    - Fixed this bug: When unit fails over to secondary proxy during INVITE, the correspnding ACK might be sent to the primary if <Proxy Fallback Intvl> expires between the INVITE and the ACK.

    - Fixed bug: Phone ACD window cannot disappear when user swich from ACD login window to Dial window

    - Fixed bug: Phone reboots when pressing DND/CFWD with both ACD login window and Dial window are shown

    - Fixed bug: After logout ACD group, softkey avail/unavail still show

    - Fixed bug: memory corruption after going in and out of corporate directory a couple of times.

    - better speakerphone performance in the presence of noise, or when the talker's volume is low.

    ### version: 5.1.0

    - Fix bug: Ext 3/4/5/6 dialplan change cannot cause phone reboot

    - Fixed the bug: Cannot factory reset call history

    - Include "replaces" in Supported header in outbound SIP messages and accept "replaces" in Require header in inbound SIP messages
     
  3. Ponozka

    Ponozka Neuer User

    Registriert seit:
    1 Mai 2006
    Beiträge:
    139
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Beruf:
    Ingenieur / CEO
    Ort:
    Neuhäusl, BY
    Inzwischen gibt es hier die Version 5.1.5 vom 29.11.06, diesmal mit Release Notes!