No D-channels available! Using Primary channel 3 as D-channel anyway!

[iptelefonie]

Hallo,

mich plagt schon eine ganze Zeit folgende Fehlermeldung:

WARNING[2268] chan_zap.c: No D-channels available! Using Primary channel 3 as D-channel anyway!

Das Warning taucht immer nach Gesprächsende auf:

[Mar 28 13:46:37] VERBOSE[2268] logger.c: -- Accepting overlap voice call from '35' to '016085489354' on channel 0/2, span 1
[Mar 28 13:46:37] VERBOSE[2518] logger.c: -- Starting simple switch on 'Zap/2-1'
[Mar 28 13:46:40] VERBOSE[2518] logger.c: -- Executing [016085489354@internzap:1] SetCallerPres("Zap/2-1", "prohib_not_screened") in new stack
[Mar 28 13:46:40] VERBOSE[2518] logger.c: -- Executing [016085489354@internzap:2] Dial("Zap/2-1", "Zap/g2/016085489354") in new stack
[Mar 28 13:46:40] VERBOSE[2518] logger.c: -- Requested transfer capability: 0x00 - SPEECH
[Mar 28 13:46:40] VERBOSE[2518] logger.c: -- Called g2/016085489354
[Mar 28 13:46:45] VERBOSE[2518] logger.c: -- Zap/4-1 is proceeding passing it to Zap/2-1
[Mar 28 13:46:45] VERBOSE[2518] logger.c: -- Zap/4-1 is making progress passing it to Zap/2-1
[Mar 28 13:46:46] VERBOSE[2518] logger.c: -- Zap/4-1 is ringing
[Mar 28 13:47:02] VERBOSE[2518] logger.c: -- Zap/4-1 is making progress passing it to Zap/2-1
[Mar 28 13:47:02] VERBOSE[2518] logger.c: -- Zap/4-1 answered Zap/2-1
[Mar 28 13:47:02] VERBOSE[2518] logger.c: -- Native bridging Zap/2-1 and Zap/4-1
[Mar 28 13:47:03] VERBOSE[2268] logger.c: -- Channel 0/2, span 1 got hangup request, cause 16
[Mar 28 13:47:03] VERBOSE[2518] logger.c: -- Hungup 'Zap/4-1'
[Mar 28 13:47:03] VERBOSE[2518] logger.c: == Spawn extension (internzap, 016085489354, 2) exited non-zero on 'Zap/2-1'
[Mar 28 13:47:03] VERBOSE[2518] logger.c: -- Hungup 'Zap/2-1'
[Mar 28 13:47:22] VERBOSE[2268] logger.c: == Primary D-Channel on span 1 down
[Mar 28 13:47:22] WARNING[2268] chan_zap.c: No D-channels available! Using Primary channel 3 as D-channel anyway!

Für diesen Anruf wurde folgende Extension verwendet:

  '_0.' =>          1. SetCALLERPRES(prohib_not_screened)         [pbx_config]
                    2. Dial(Zap/g2/${EXTEN})                      [pbx_config]

Meine zaptel.conf:

loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,0,3,ccs,ami
bchan=4-5
dchan=6

zapata.conf:

[channels]

; 1. Karte im NT-Modus
switchtype=euroisdn 
signalling=bri_net_ptmp;
pridialplan=unknown
prilocaldialplan=unknown
echocancel=yes 
immediate=no 
usecallingpres=yes 
overlapdial=yes 
group=1 
context=internzap
channel=>1-2 ;


; 2. Karte im TE-Modus 
pridialplan=unknown 
prilocaldialplan=unknown 
nationalprefix=0 
internationalprefix=00 
;hidecallerid=yes 
;restrictcid=yes 
;signalling=bri_cpe_ptmp 
;toneduration=300 
signalling=bri_cpe_ptmp 
relaxdtmf=yes 
echocancel=yes 
immediate=no 
usecallingpres=yes 
overlapdial=yes 
group=2 
context=zapin 
channel=>4-5

Als System verwende ich Asterisk 1.4.21.1-BRIstuffed-0.4.0-RC3b built by root @ hfc on a i686 running Linux on 2008-09-12 17:07:32 UTC

Wäre es möglich das es mit der HFCS-Karte zusammen hängt?
Ich würde mich sehr freuen, wenn mir jemand einen Tipp geben könnte

Viele Grüße,
iptelefonie

 

[wpfundstein]

Hallo

loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,0,3,ccs,ami
bchan=4-5
dchan=6

Ändere mal folgendes (rote Kennzeichnung):

defaultzone=nl
span=1,0,3,ccs,ami
bchan=1-2
dchan=3
span=2,1,3,ccs,ami
bchan=4-5
dchan=6

Grüße

 

[KaMe]

zu dem Thema kann ich folgenden Link empfehlen:

http://www.voip-info.org/wiki/view/Zaptel.conf+span+syntax

Meine Konfig sieht so aus:

span=1,1,3,ccs,ami
bchan=1,2
dchan=3

span=2,2,3,ccs,ami
bchan=4,5
dchan=6

span=3,3,3,ccs,ami
bchan=7,8
dchan=9

span=4,4,3,ccs,ami
bchan=10,11
dchan=12

span=5,5,3,ccs,ami
bchan=13-14
dchan=15

span=6,6,3,ccs,ami
bchan=16-17
dchan=18

span=7,7,3,ccs,ami
bchan=19-20
dchan=21

span=8,8,3,ccs,ami
bchan=22-23
dchan=24