Patton SN4638, 0 bei eingehenden Anrufen

[win-lux]

Unsere 3CX Telefonzentrale hat einen neuren
Gateway Patten SN4638/5BIS erhalten
Software Version R4.2 2008-09-11 H323 SIP BRI

Ich möchte nun bei eingehenden Nummern ein führende 0 einfügen:

Beispiel:

eingehende Nummer heute= 0813335151
eingehende Nummer neu = 00813335151

kann mir jemand sagen wo ich den fehler gemacht habe in der config?

#----------------------------------------------------------------#
#                                                                #
# SN4638/5BIS                                                    #
# R4.2 2008-09-11 H323 SIP BRI                                   #
# 2009-07-29T21:17:15                                            #
# SN/00A0BA0449AF                                                #
#                                                                #
#                                                                #
#----------------------------------------------------------------#

cli version 3.20
webserver port 80 language en

system

  ic voice 0
    low-bitrate-codec g729

system
  clock-source 1 bri 0 0

profile ppp default

profile call-progress-tone defaultDialtone
  play 1 1000 425 0

profile tone-set default

profile voip default
  codec 1 g711alaw64k rx-length 20 tx-length 20
  codec 2 g711ulaw64k rx-length 20 tx-length 20
  fax transmission 1 relay t38-udp

profile pstn default

profile sip default
  no autonomous-transitioning

profile aaa default
  method 1 local
  method 2 none

context ip router

  interface IF_IP_WAN
    ipaddress dhcp
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

  interface IF_IP_LAN
    ipaddress 192.168.70.101 255.255.255.0
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context cs switch

  routing-table called-e164 RT_ISDN_TO_SIP_0
    route T2 dest-interface IF_SIP_0 CF_ADD_REM

  routing-table called-e164 RT_ISDN_TO_SIP_1
    route T2 dest-interface IF_SIP_1 CF_ADD_REM

  routing-table called-e164 RT_ISDN_TO_SIP_2
    route T2 dest-interface IF_SIP_2 CF_ADD_REM

  routing-table called-e164 RT_ISDN_TO_SIP_3
    route T2 dest-interface IF_SIP_3 CF_ADD_REM

  mapping-table calling-pi to calling-e164 MP_REM_CLIR
    map restricted to ""

  mapping-table called-e164 to called-e164 ADD-0
    map (.%) to 0\1

  complex-function CF_ADD_REM
    execute 1 MP_REM_CLIR
    execute 2 ADD-0

  interface isdn IF_ISDN_0
    route call dest-table RT_ISDN_TO_SIP_0

  interface isdn IF_ISDN_1
    route call dest-table RT_ISDN_TO_SIP_1

  interface isdn IF_ISDN_2
    route call dest-table RT_ISDN_TO_SIP_2

  interface isdn IF_ISDN_3
    route call dest-table RT_ISDN_TO_SIP_3

  interface sip IF_SIP_0
    bind gateway GW_SIP_0
    service default
    route call dest-interface IF_ISDN_0
    early-connect
    early-disconnect
    remote-party-id called-party
    address-translation outgoing-call request-uri user-part fix 10000 host-part to-header target-param none
    address-translation incoming-call called-e164 request-uri

  interface sip IF_SIP_1
    bind gateway GW_SIP_1
    service default
    route call dest-interface IF_ISDN_1
    early-connect
    early-disconnect
    remote-party-id called-party
    address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none
    address-translation incoming-call called-e164 request-uri

  interface sip IF_SIP_2
    bind gateway GW_SIP_2
    service default
    route call dest-interface IF_ISDN_2
    early-connect
    early-disconnect
    remote-party-id called-party
    address-translation outgoing-call request-uri user-part fix 10002 host-part to-header target-param none
    address-translation incoming-call called-e164 request-uri

  interface sip IF_SIP_3
    bind gateway GW_SIP_3
    service default
    route call dest-interface IF_ISDN_3
    early-connect
    early-disconnect
    remote-party-id called-party
    address-translation outgoing-call request-uri user-part fix 10003 host-part to-header target-param none
    address-translation incoming-call called-e164 request-uri

context cs switch
  no shutdown

gateway sip GW_SIP_0
  bind interface IF_IP_LAN router

  service default
    domain 192.168.70.15
    defaultserver manual 192.168.70.15 loose-router
    registration-lifetime 300
    registration manual 192.168.70.15
    user 10000 authenticate password LbFCDNv4/Fk= encrypted default register

gateway sip GW_SIP_0
  no shutdown

gateway sip GW_SIP_1
  call-signaling-port 5062
  bind interface IF_IP_LAN router

  service default
    domain 192.168.70.15
    defaultserver manual 192.168.70.15 loose-router
    registration-lifetime 300
    registration manual 192.168.70.15
    user 10001 authenticate password dZ8edXkjFnM= encrypted default register

gateway sip GW_SIP_1
  no shutdown

gateway sip GW_SIP_2
  call-signaling-port 5064
  bind interface IF_IP_LAN router

  service default
    domain 192.168.70.15
    defaultserver manual 192.168.70.15 loose-router
    registration-lifetime 300
    registration manual 192.168.70.15
    user 10002 authenticate password iAaKwKfxX4Q= encrypted default register

gateway sip GW_SIP_2
  no shutdown

gateway sip GW_SIP_3
  call-signaling-port 5066
  bind interface IF_IP_LAN router

  service default
    domain 192.168.70.15
    defaultserver manual 192.168.70.15 loose-router
    registration-lifetime 300
    registration manual 192.168.70.15
    user 10003 authenticate password ySyWxUvSc/c= encrypted default register

gateway sip GW_SIP_3
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface IF_IP_WAN router
  no shutdown

port ethernet 0 1
  medium auto
  encapsulation ip
  bind interface IF_IP_LAN router
  no shutdown

port bri 0 0
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_0 switch

port bri 0 0
  no shutdown

port bri 0 1
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_1 switch

port bri 0 1
  no shutdown

port bri 0 2
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_2 switch

port bri 0 2
  no shutdown

port bri 0 3
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      bchan-number-order ascending
      encapsulation cc-isdn
      bind interface IF_ISDN_3 switch

port bri 0 3
  no shutdown

port bri 0 4
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      bchan-number-order ascending

port bri 0 4
  shutdown

Edit Guard-X: Code-Tags eingefügt!

 

[jokakilla]

Falls es sich nicht schon erledigt hat versuch mal

mapping-table called-e164 to called-e164 ADD-0
map (.%) to 0\1

durch

mapping-table called-e164 to called-e164 ADD-0
map 0% to 00

zu ersetzen. Und mach mal ein Firmwareupdate. 4.2 ist schon steinalt.