Pickup mit Trixbox 2.0 und bristuff

[Zivi]

hi alle,

ich hab hier mit meiner anlage ein kleines problem:
ich kann keine anrufe zu meinem telefon (egal ob sip oder isdn) herholen.

folgende konfiguration habe ich:
Trixbox 2.0 (Asterisk 1.2.7.1-BRIstuffed-0.3.0-PRE-1o)
2 octoBRI Karten
1 TDM400P mit 4 x FXS
als featurecode für pickup habe ich 194 (es ist nicht ** weil ich ein ISDN-Telefon hier habe, das aus irgendwelchen gründen kein * schicken kann :noidea

wenn ich jetzt einen eingehenden anruf auf einem siptelefon von einem anderen siptelefon aus übernehmen will, kommt nur folgendes in der asteriskCLI:

    -- Accepting overlap voice call from '00179XXXXXXX' to 'XXXXXXX55' on channel 0/1, span 1
    -- Starting simple switch on 'Zap/1-1'
    -- Executing Set("Zap/1-1", "DID=XXXXXX55") in new stack
    -- Executing Goto("Zap/1-1", "s|1") in new stack
    -- Goto (from-zaptel,s,1)
    -- Executing NoOp("Zap/1-1", "Entering from-zaptel with DID == XXXXXX55") in new stack
    -- Executing Ringing("Zap/1-1", "") in new stack
    -- Executing Set("Zap/1-1", "DID=XXXXXX55") in new stack
    -- Executing NoOp("Zap/1-1", "DID is now XXXXXX55") in new stack
    -- Executing GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
    -- Goto (from-zaptel,s,8)
    -- Executing NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
    -- Executing Set("Zap/1-1", "CHAN=1-1") in new stack
    -- Executing Set("Zap/1-1", "CHAN=1") in new stack
    -- Executing Macro("Zap/1-1", "from-zaptel-1|XXXXXX55|1") in new stack
    -- Executing NoOp("Zap/1-1", "Returned from Macro from-zaptel-1") in new stack
    -- Executing Goto("Zap/1-1", "from-pstn|XXXXXX55|1") in new stack
    -- Goto (from-pstn,XXXXXX55,1)
    -- Executing Set("Zap/1-1", "FROM_DID=XXXXXX55") in new stack
    -- Executing Set("Zap/1-1", "FAX_RX=disabled") in new stack
    -- Executing Goto("Zap/1-1", "from-did-direct|55|1") in new stack
    -- Goto (from-did-direct,55,1)
    -- Executing Macro("Zap/1-1", "exten-vm|novm|55") in new stack
    -- Executing Macro("Zap/1-1", "user-callerid") in new stack
    -- Executing NoOp("Zap/1-1", "user-callerid:  00179XXXXXXX") in new stack
    -- Executing GotoIf("Zap/1-1", "0?report") in new stack
    -- Executing GotoIf("Zap/1-1", "0?start") in new stack
    -- Executing Set("Zap/1-1", "REALCALLERIDNUM=00179XXXXXXX") in new stack
    -- Executing NoOp("Zap/1-1", "REALCALLERIDNUM is 00179XXXXXXX") in new stack
    -- Executing Set("Zap/1-1", "AMPUSER=") in new stack
    -- Executing Set("Zap/1-1", "AMPUSERCIDNAME=") in new stack
    -- Executing GotoIf("Zap/1-1", "1?report") in new stack
    -- Goto (macro-user-callerid,s,11)
    -- Executing NoOp("Zap/1-1", "TTL:  ARG1: novm") in new stack
    -- Executing GotoIf("Zap/1-1", "0?continue") in new stack
    -- Executing Set("Zap/1-1", "_TTL=64") in new stack
    -- Executing GotoIf("Zap/1-1", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,21)
    -- Executing NoOp("Zap/1-1", "Using CallerID "" <00179XXXXXXX>") in new stack
    -- Executing Set("Zap/1-1", "FROMCONTEXT=exten-vm") in new stack
    -- Executing Set("Zap/1-1", "VMBOX=novm") in new stack
    -- Executing Set("Zap/1-1", "EXTTOCALL=55") in new stack
    -- Executing Set("Zap/1-1", "CFUEXT=") in new stack
    -- Executing Set("Zap/1-1", "RT=") in new stack
    -- Executing Macro("Zap/1-1", "record-enable|55|IN") in new stack
    -- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing DeadAGI("Zap/1-1", "recordingcheck|20070512-144457|asterisk-4535-1178973893.40") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20070512-144457|asterisk-4535-1178973893.40: Inbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing NoOp("Zap/1-1", "No recording needed") in new stack
    -- Executing Macro("Zap/1-1", "dial||tr|55") in new stack
    -- Executing DeadAGI("Zap/1-1", "dialparties.agi") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
  dialparties.agi: Starting New Dialparties.agi
  dialparties.agi: priority is 1
  dialparties.agi: Caller ID name is 'unknown' number is '00179XXXXXXX'
  dialparties.agi: Methodology of ring is  'none'
    --  dialparties.agi: Added extension 55 to extension map
    --  dialparties.agi: Extension 55 cf is disabled
    --  dialparties.agi: Extension 55 do not disturb is disabled
    --  dialparties.agi: dbset CALLTRACE/55 to 00179XXXXXXX
    -- AGI Script dialparties.agi completed, returning 0
    -- Executing Dial("Zap/1-1", "SIP/55||tr") in new stack
    -- Called 55
    -- SIP/55-9de6 is ringing
    -- SIP/55-9de6 is ringing
    -- SIP/55-9de6 is ringing

und ab hier will ich den anruf übernehmen:

    -- Executing NoOp("SIP/1604-b501", "Attempt to Pickup 55 by 1604") in new stack
    -- Executing PickUp("SIP/1604-b501", "55") in new stack
    -- No channel found 0.
  == Spawn extension (from-internal, 19455, 2) exited non-zero on 'SIP/1604-b501'
    -- Executing Macro("SIP/1604-b501", "hangupcall") in new stack
    -- Executing ResetCDR("SIP/1604-b501", "w") in new stack
    -- Executing NoCDR("SIP/1604-b501", "") in new stack
    -- Executing GotoIf("SIP/1604-b501", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing GotoIf("SIP/1604-b501", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing Wait("SIP/1604-b501", "5") in new stack
    -- SIP/55-9de6 is ringing
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/1604-b501' in macro 'hangupcall'
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/1604-b501'
    -- Channel 0/1, span 1 got hangup request
  == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'dial'
  == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'exten-vm'
  == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1'
    -- Executing Macro("Zap/1-1", "hangupcall") in new stack
    -- Executing ResetCDR("Zap/1-1", "w") in new stack
    -- Executing NoCDR("Zap/1-1", "") in new stack
    -- Executing GotoIf("Zap/1-1", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing GotoIf("Zap/1-1", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing Wait("Zap/1-1", "5") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'Zap/1-1' in macro 'hangupcall'
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'

die gleichen meldungen bekomme ich auch, wenn ich mit einem isdntel von sip/isdntel einen anruf abholen will oder mit einem sip von einem isdntel.

mein frage nun ganz konkret: was muss ich anstellen damit das pickup endlich klappt?

wenn es noch mehr infos benötigt um diese nuss zu klacken, bitte bescheidsagen, ich schieb rüber was es braucht.

 

[Zivi]

wär ja zur abwechlung mal ganz nett, wenn sich hier mal einer melden würde zum helfen! DANKE!