RJ45 and RJ11

[Amien]

i bought a german 7270 .. this has a RJ45 cable and not a RJ11 one. anyone knows there i can buy this cable? or can i just buy any RJ45-RJ11 convertor without using a Y-Split cable?
i dont want to make the cable myself.

Thanks in advanced

 

[gandalf94305]

It's a special cable that combines several connections in one cable. Don't be misled by the seemingly familiar connector ;-)

You have a FBF 7270 and want to connect an analogue telephone line? Do you also need a DSL line into the 7270 or will Internet be via LAN1?

--gandalf.

 

[Amien]

Thanks for your reply ... out of the wall comes a RJ11 .. and the fritzbox has a RJ45.
In the past i also had a 7170 .. that came with a Y-split cable. With on one site a RJ45 and on the other site 2x RJ11

my 7170 came with this box:

so .. RJ11 from wall to this box .. Y-split cable had 2x RJ11 which goes into this box .. and on the other end of the Y-split cable there was a RJ45. That goes in the 7270

 

[KunterBunter]

Just connect your 7270 the same way as your former 7170, same box and same cables as before. This should be the only way it works.

 

[Amien]

yes .. but dont have the 7170 anymore .. and bought a german 7270. flashed it to international .. the 7270 didnt came with the cables i needed... where can i buy those and what exactly do i need? i was wonder if a RJ45-11 convertor is sufficient.

 

[KunterBunter]

As I said, this should be the only way it works. As long as you want a connection to your telephony network, you will need a splitter box and the special Y-cable.
If you use internet and VoIP only, you may try a cable adapter.

 

[Resool]

hello Amien

http://www.avm.de/de/Service/FAQs/FAQ_Sammlung/12224.php3

Pin Connection of both type (fb 7170 and fb 7270) are the same

Did you allready try to contact AVM and ask for a splitting cable with to RJ11
instead of the RJ45.

best regards
Resool