Hallo,
ich möchte die Smartnode 4554 genau dazu benutzen, wozu sie eigentlich da ist. Einen Anlagenanschluss (2 S0) möchte ich an meine IP-Anlage (Asterisk, Trixbox) anschliessen.
Leider scheint das enorm kompliziert zu sein, hab jetzt schon ewig rumprobiert, geht aber nicht wirklich. Asterisk registriert gar nicht erst.
Ist die Konfigurationsdatei, die ich mir zusammengereimt habe, so überhaupt brauchbar?
Und was genau muss ich bei der Trixbox (idealerweise in freepbx) eingeben, sipgate habe ich da schon am laufen.
Hoffe mir kann irgendjemand irgendwie helfen.
Danke
ich möchte die Smartnode 4554 genau dazu benutzen, wozu sie eigentlich da ist. Einen Anlagenanschluss (2 S0) möchte ich an meine IP-Anlage (Asterisk, Trixbox) anschliessen.
Leider scheint das enorm kompliziert zu sein, hab jetzt schon ewig rumprobiert, geht aber nicht wirklich. Asterisk registriert gar nicht erst.
Ist die Konfigurationsdatei, die ich mir zusammengereimt habe, so überhaupt brauchbar?
Code:
#----------------------------------------------------------------#
# #
# SN4554/2BIS/EUI #
# R4.2 2007-09-19 SIP #
# 2008-03-25T12:50:07 #
# SN/00A0BA036C6C #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
gui type basic
administrator administrator password 123456798== encrypted
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
low-bitrate-codec g729
system
clock-source 1 bri 0 0
clock-source 2 bri 0 1
profile acl ACL_WAN_PERMIT_SEL_MGMT
profile service-policy SP_WAN_OUT
no rate-limit
profile service-policy SP_WAN_IN
no rate-limit
profile napt NAPT_WAN
profile tone-set default
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
profile voip VOIP
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g729 rx-length 20 tx-length 20
codec 3 g711ulaw64k rx-length 20 tx-length 20
dejitter-mode static
dejitter-max-delay 120
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface IF_IP_WAN
ipaddress 192.168.16.112 255.255.255.0
use profile napt NAPT_WAN
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface IF_IP_LAN
ipaddress unnumbered
context cs
interface isdn IF_S0_00
route call dest-interface IF-ASTERISK
interface isdn IF_S0_01
route call dest-interface IF-ASTERISK
interface sip IF-ASTERISK
bind gateway ASTERISK
# route call dest-interface IF_S0_01
route call dest-service ANLAGE_PSTN
# address-translation outgoing-call from-header user-part fix patton4554 host-part call
gateway sip ASTERISK
call-signaling-port 5060
default-server 192.168.16.110 loose-router
# registrar ‹x.x.x.x›
user patton4554 display-name patton4554 phone-context "from-pstn"
authentication auto patton4554 isdn4554pwd
bind interface eth0 router
no shutdown
use profile voip VOIP
service hunt-group ANLAGE_PSTN
cyclic
timeout 6
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_S0_00
route call 2 dest-interface IF_S0_01
context cs switch
no shutdown
port ethernet 0 0
bind interface IF_IP_WAN router
port ethernet 0 0
no shutdown
port bri 0 0
clock auto
encapsulation q921
q921
permanent-layer2
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_00 switch
port bri 0 0
no shutdown
port bri 0 1
clock auto
encapsulation q921
q921
permanent-layer2
protocol pp
uni-side auto
encapsulation q931
q931
protocol dss1
uni-side user
bchan-number-order ascending
encapsulation cc-isdn
bind interface IF_S0_01 switch
port bri 0 1
no shutdown
Und was genau muss ich bei der Trixbox (idealerweise in freepbx) eingeben, sipgate habe ich da schon am laufen.
Hoffe mir kann irgendjemand irgendwie helfen.
Danke