Syntax error in dialstring

[VOIPdani]

Jetzt hab ich contr0 auf contr1 umgeändert und auch in der capi.conf controller=1 stehen und da macht * dann schon mehr:

    -- Executing SetCIDNum("SIP/204-08d9", "57") in new stack
    -- Executing Dial("SIP/204-08d9", "CAPI/contr1/07269xxxx") in new stack
    -- data = contr1/07269xxxx
    -- capi request controller = 1
    -- creating pipe for PLCI=0
  == CAPI Call CAPI/contr1/07269xxxx-1  (pres=0x00)
CONNECT_REQ ID=002 #0x0005 LEN=0062
  Controller/PLCI/NCCI            = 0x1
  CIPValue                        = 0x10
  CalledPartyNumber               = <80>07269xxxx
  CallingPartyNumber              = <00 80 22>ZyXEL<22> <3c>57<3e>
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

    -- Called contr1/07269xxxx
CONNECT_CONF ID=002 #0x0005 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

  == received CONNECT_CONF PLCI = 0x101 INFO = 0
INFO_IND ID=002 #0x0033 LEN=0015
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x800d
  InfoElement                     = default

INFO_RESP ID=002 #0x0033 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element SETUP ACK
INFO_IND ID=002 #0x0034 LEN=0017
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x1e
  InfoElement                     = <80 88>

INFO_RESP ID=002 #0x0034 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element PI 80 88
 In-band information available
INFO_IND ID=002 #0x0035 LEN=0016
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP ID=002 #0x0035 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element CHANNEL IDENTIFIKATION 89
INFO_IND ID=002 #0x0036 LEN=0015
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x8045
  InfoElement                     = default

INFO_RESP ID=002 #0x0036 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element DISCONNECT
 Disconnect case 1
INFO_IND ID=002 #0x0037 LEN=0017
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x1e
  InfoElement                     = <82 88>

INFO_RESP ID=002 #0x0037 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element PI 82 88
 In-band information available
INFO_IND ID=002 #0x0038 LEN=0017
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x8
  InfoElement                     = <82 83>

INFO_RESP ID=002 #0x0038 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == info element CAUSE 82 83
    -- CAPI/contr1/07269xxxx-1 is busy
    -- CAPI Hangingup
       > activehangingup
DISCONNECT_REQ ID=002 #0x0006 LEN=0017
  Controller/PLCI/NCCI            = 0x101
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

DISCONNECT_CONF ID=002 #0x0006 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

  == Everyone is busy/congested at this time
DISCONNECT_IND ID=002 #0x0039 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x3483

DISCONNECT_RESP ID=002 #0x0039 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- removed pipe for PLCI = 0x101

Aber aus dem werd ich irgendwie auch net schlau! Kannst du mir sagen warum ich keinen outgoing call absetzten kann?

 

[VOIPdani]

Ich habs geschafft! :lol:
Ich kann outgoing calls absetzten.

Ich glaube das mein Fehler der war dass ich vor dem Dial-Kommando kein SetCallerID gemacht habe.

So funkts:
exten => _0.,1,SetCallerID(57)
exten => _0.,2,Dial(CAPI/contr1/${EXTEN})

lg Dani