Wie ihr euch sicher schon denken könnt, hab ich ein Problem mit der Konfiguration von Trixbox in Verbindung mit einer Eicon Diva V-4BRI-8M.
Bevor jetzt wieder einige gleich mal die Suchfunktion beschreiben, so möchte ich gleich mal einwerfen, dass ich diese auch benutzt habe. Hab dabei mehrere Ansätze gefunden, doch keiner hat bei mir funktioniert.
Nachdem ich die Trixbox nun das ca. 20´ste mal schon installiert habe und mittlerweile auch schon eigene Wege versucht habe, so gebe ich jetzt doch auf.
Vielleicht (oder besser gesagt hoffentlich
) fällt euch noch etwas ein.
Problem:
Neue Trixbox 2.6 ISO installiert. Eicon Diva ebenfalls installiert. Die Eicon mit dem ./Config auf PTP eingerichtet. Wenn man nun capiinfo eintippt, so sieht man die Karte auch. Rechner neu gestartet. Im Asterisk CLI sieht man (wenn man capi info eingibt), dass der Treiber drin ist. Bis jetzt noch keine Fehlermeldung!
Nun kommts:
Über das Webinterface der Trixbox wurden 2 SIP Nebenstellen eingerichtet. Diese funktionieren auch einwandfrei. Nun habe ich bei Trunks folgendes eingestellt: Maximum Channel 2, Outbound Dial Prefix: 0, Costum Dial String: CAPI/contr1/$OUTNUM$/b
Anschliessen habe ich Outbound Routes folgendes eingestellt: Dial Patterns: 0|. und bei Trunk Sequence habe ich das vorher eingerichtete Amt genommen.
Wenn ich nun versuche, mit 0 ein gespäch zu führen (zB. 1503 also wähle ich 01503), so erhalte ich ein Besetztzeichen und auf der Konsole wird folgende meldung ausgegeben.
-- Executing [011503@from-internal:1] Macro("SIP/71-09ffe330", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/71-09ffe330", "user-callerid: device 71") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/71-09ffe330", "AMPUSER=71") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/71-09ffe330", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/71-09ffe330", "1|Set|REALCALLERIDNUM=71") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/71-09ffe330", "REALCALLERIDNUM is 71") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/71-09ffe330", "AMPUSER=71") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/71-09ffe330", "AMPUSERCIDNAME=Test2") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/71-09ffe330", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/71-09ffe330", "AMPUSERCID=71") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/71-09ffe330", "CALLERID(all)="Test2" <71>") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/71-09ffe330", "REALCALLERIDNUM=71") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/71-09ffe330", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/71-09ffe330", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/71-09ffe330", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/71-09ffe330", "Using CallerID "Test2" <71>") in new stack
-- Executing [011503@from-internal:2] Set("SIP/71-09ffe330", "_NODEST=") in new stack
-- Executing [011503@from-internal:3] Macro("SIP/71-09ffe330", "record-enable|71|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/71-09ffe330", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/71-09ffe330", "recordingcheck|20081021-142017|1224591617.11") in new stack
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20081021-142017|1224591617.11: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/71-09ffe330", "No recording needed") in new stack
-- Executing [011503@from-internal:4] Macro("SIP/71-09ffe330", "dialout-trunk|2|11503||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/71-09ffe330", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] ExecIf("SIP/71-09ffe330", "0|Authenticate|") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/71-09ffe330", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/71-09ffe330", "DIAL_NUMBER=11503") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/71-09ffe330", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/71-09ffe330", "GROUP()=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/71-09ffe330", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/71-09ffe330", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/71-09ffe330", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/71-09ffe330", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/71-09ffe330", "outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/71-09ffe330", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] GotoIf("SIP/71-09ffe330", "1?start") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing [s@macro-outbound-callerid:4] NoOp("SIP/71-09ffe330", "REALCALLERIDNUM is 71") in new stack
-- Executing [s@macro-outbound-callerid:5] GotoIf("SIP/71-09ffe330", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,10)
-- Executing [s@macro-outbound-callerid:10] Set("SIP/71-09ffe330", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("SIP/71-09ffe330", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] Set("SIP/71-09ffe330", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/71-09ffe330", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,17)
-- Executing [s@macro-outbound-callerid:17] GotoIf("SIP/71-09ffe330", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,19)
-- Executing [s@macro-outbound-callerid:19] GotoIf("SIP/71-09ffe330", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,23)
-- Executing [s@macro-outbound-callerid:23] NoOp("SIP/71-09ffe330", "CallerID set to "Test2" <71>") in new stack
-- Executing [s@macro-dialout-trunk:12] AGI("SIP/71-09ffe330", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/71-09ffe330", "OUTNUM=011503") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/71-09ffe330", "custom=AMP") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/71-09ffe330", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/71-09ffe330", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/71-09ffe330", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/71-09ffe330", "1?customtrunk") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] Set("SIP/71-09ffe330", "pre_num=AMP:CAPI/contr4/") in new stack
-- Executing [s@macro-dialout-trunk:23] Set("SIP/71-09ffe330", "the_num=OUTNUM") in new stack
-- Executing [s@macro-dialout-trunk:24] Set("SIP/71-09ffe330", "post_num=/b") in new stack
-- Executing [s@macro-dialout-trunk:25] GotoIf("SIP/71-09ffe330", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,26)
-- Executing [s@macro-dialout-trunk:26] Set("SIP/71-09ffe330", "the_num=011503") in new stack
-- Executing [s@macro-dialout-trunk:27] Dial("SIP/71-09ffe330", "CAPI/contr4/011503/b|300|") in new stack
-- Called contr4/011503/b
> V4BRI-4#02: CAPI INFO 0x2003: Out of PLCIs
-- CAPI/V4BRI-4#02/011503-5 is busy
== V4BRI-4#02: CAPI Hangingup for PLCI=0 in state 4
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [s@macro-dialout-trunk:28] Goto("SIP/71-09ffe330", "s-BUSY|1") in new stack
-- Goto (macro-dialout-trunk,s-BUSY,1)
-- Executing [s-BUSY@macro-dialout-trunk:1] NoOp("SIP/71-09ffe330", "Dial failed due to trunk reporting BUSY - giving up") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:2] PlayTones("SIP/71-09ffe330", "busy") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:3] Busy("SIP/71-09ffe330", "20") in new stack
== Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/71-09ffe330' in macro 'dialout-trunk'
== Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/71-09ffe330'
-- Executing [h@macro-dialout-trunk:1] Macro("SIP/71-09ffe330", "hangupcall|") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/71-09ffe330", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/71-09ffe330", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/71-09ffe330", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/71-09ffe330", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/71-09ffe330", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/71-09ffe330", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/71-09ffe330' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/71-09ffe330'
Kann jemand von euch etwas mit der Meldung anfangen???
Bin echt schon am verzweifeln!
Bevor jetzt wieder einige gleich mal die Suchfunktion beschreiben, so möchte ich gleich mal einwerfen, dass ich diese auch benutzt habe. Hab dabei mehrere Ansätze gefunden, doch keiner hat bei mir funktioniert.
Nachdem ich die Trixbox nun das ca. 20´ste mal schon installiert habe und mittlerweile auch schon eigene Wege versucht habe, so gebe ich jetzt doch auf.
Vielleicht (oder besser gesagt hoffentlich
) fällt euch noch etwas ein.Problem:
Neue Trixbox 2.6 ISO installiert. Eicon Diva ebenfalls installiert. Die Eicon mit dem ./Config auf PTP eingerichtet. Wenn man nun capiinfo eintippt, so sieht man die Karte auch. Rechner neu gestartet. Im Asterisk CLI sieht man (wenn man capi info eingibt), dass der Treiber drin ist. Bis jetzt noch keine Fehlermeldung!
Nun kommts:
Über das Webinterface der Trixbox wurden 2 SIP Nebenstellen eingerichtet. Diese funktionieren auch einwandfrei. Nun habe ich bei Trunks folgendes eingestellt: Maximum Channel 2, Outbound Dial Prefix: 0, Costum Dial String: CAPI/contr1/$OUTNUM$/b
Anschliessen habe ich Outbound Routes folgendes eingestellt: Dial Patterns: 0|. und bei Trunk Sequence habe ich das vorher eingerichtete Amt genommen.
Wenn ich nun versuche, mit 0 ein gespäch zu führen (zB. 1503 also wähle ich 01503), so erhalte ich ein Besetztzeichen und auf der Konsole wird folgende meldung ausgegeben.
-- Executing [011503@from-internal:1] Macro("SIP/71-09ffe330", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/71-09ffe330", "user-callerid: device 71") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/71-09ffe330", "AMPUSER=71") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/71-09ffe330", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/71-09ffe330", "1|Set|REALCALLERIDNUM=71") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/71-09ffe330", "REALCALLERIDNUM is 71") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/71-09ffe330", "AMPUSER=71") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/71-09ffe330", "AMPUSERCIDNAME=Test2") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/71-09ffe330", "0?report") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/71-09ffe330", "AMPUSERCID=71") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/71-09ffe330", "CALLERID(all)="Test2" <71>") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/71-09ffe330", "REALCALLERIDNUM=71") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/71-09ffe330", "0|Set|CHANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/71-09ffe330", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/71-09ffe330", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/71-09ffe330", "Using CallerID "Test2" <71>") in new stack
-- Executing [011503@from-internal:2] Set("SIP/71-09ffe330", "_NODEST=") in new stack
-- Executing [011503@from-internal:3] Macro("SIP/71-09ffe330", "record-enable|71|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/71-09ffe330", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/71-09ffe330", "recordingcheck|20081021-142017|1224591617.11") in new stack
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20081021-142017|1224591617.11: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/71-09ffe330", "No recording needed") in new stack
-- Executing [011503@from-internal:4] Macro("SIP/71-09ffe330", "dialout-trunk|2|11503||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/71-09ffe330", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] ExecIf("SIP/71-09ffe330", "0|Authenticate|") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/71-09ffe330", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/71-09ffe330", "DIAL_NUMBER=11503") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/71-09ffe330", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/71-09ffe330", "GROUP()=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/71-09ffe330", "0?nomax") in new stack
-- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/71-09ffe330", "0?chanfull") in new stack
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/71-09ffe330", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/71-09ffe330", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/71-09ffe330", "outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/71-09ffe330", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] GotoIf("SIP/71-09ffe330", "1?start") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing [s@macro-outbound-callerid:4] NoOp("SIP/71-09ffe330", "REALCALLERIDNUM is 71") in new stack
-- Executing [s@macro-outbound-callerid:5] GotoIf("SIP/71-09ffe330", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,10)
-- Executing [s@macro-outbound-callerid:10] Set("SIP/71-09ffe330", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("SIP/71-09ffe330", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] Set("SIP/71-09ffe330", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/71-09ffe330", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,17)
-- Executing [s@macro-outbound-callerid:17] GotoIf("SIP/71-09ffe330", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,19)
-- Executing [s@macro-outbound-callerid:19] GotoIf("SIP/71-09ffe330", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,23)
-- Executing [s@macro-outbound-callerid:23] NoOp("SIP/71-09ffe330", "CallerID set to "Test2" <71>") in new stack
-- Executing [s@macro-dialout-trunk:12] AGI("SIP/71-09ffe330", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/71-09ffe330", "OUTNUM=011503") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/71-09ffe330", "custom=AMP") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/71-09ffe330", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/71-09ffe330", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/71-09ffe330", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/71-09ffe330", "1?customtrunk") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] Set("SIP/71-09ffe330", "pre_num=AMP:CAPI/contr4/") in new stack
-- Executing [s@macro-dialout-trunk:23] Set("SIP/71-09ffe330", "the_num=OUTNUM") in new stack
-- Executing [s@macro-dialout-trunk:24] Set("SIP/71-09ffe330", "post_num=/b") in new stack
-- Executing [s@macro-dialout-trunk:25] GotoIf("SIP/71-09ffe330", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,26)
-- Executing [s@macro-dialout-trunk:26] Set("SIP/71-09ffe330", "the_num=011503") in new stack
-- Executing [s@macro-dialout-trunk:27] Dial("SIP/71-09ffe330", "CAPI/contr4/011503/b|300|") in new stack
-- Called contr4/011503/b
> V4BRI-4#02: CAPI INFO 0x2003: Out of PLCIs
-- CAPI/V4BRI-4#02/011503-5 is busy
== V4BRI-4#02: CAPI Hangingup for PLCI=0 in state 4
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [s@macro-dialout-trunk:28] Goto("SIP/71-09ffe330", "s-BUSY|1") in new stack
-- Goto (macro-dialout-trunk,s-BUSY,1)
-- Executing [s-BUSY@macro-dialout-trunk:1] NoOp("SIP/71-09ffe330", "Dial failed due to trunk reporting BUSY - giving up") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:2] PlayTones("SIP/71-09ffe330", "busy") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:3] Busy("SIP/71-09ffe330", "20") in new stack
== Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/71-09ffe330' in macro 'dialout-trunk'
== Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/71-09ffe330'
-- Executing [h@macro-dialout-trunk:1] Macro("SIP/71-09ffe330", "hangupcall|") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/71-09ffe330", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/71-09ffe330", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/71-09ffe330", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/71-09ffe330", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/71-09ffe330", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/71-09ffe330", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/71-09ffe330' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/71-09ffe330'
Kann jemand von euch etwas mit der Meldung anfangen???
Bin echt schon am verzweifeln!
