USB-Hdd (NTFS) wird nicht erkannt/eingebunden

Nelix · 3 Okt 2009

Hallo zusammen!

Ich möchte eine USB-Platte (SAMSUNG HM320JI) an den USB hängen. Dateisystem ist NTFS.

Leider wird die Platte nicht erkannt:
"Es wurden 0 von 1 Partitionen eingebunden."
"Der USB-Speicher 2 enthält kein unterstütztes Dateisystem oder hat eine ungültige Partitionstabelle. (Das Gerät hat den folgenden Typ: 152d:2336)"

Unter Freetz (usbroot) wird sie erkannt:
"SAMSUNG HM320JI /dev/sda1 305242 MiB ntfs"
Mit PUTTY erscheint sie aber nicht uner /var/media/ftp

Ich bin schon einige Threads hier im Forum durchgegangen, doch bisher hat nichts geholfen.
Habe den trunk neu ausgecheckt und neu geflasht. Hat aber nichts gebracht. Habe auch bei "Patches" nur "Automount Filesystem" "NTFS" und nicht "ext2" und/oder "ext3" ausgewählt.
Habe bei "Advanced options" "Add Freetz version to substring" abgewählt.

Log:

Code:

 rc.mod version freetz-devel
crond is disabled
telnetd is disabled
Starting Freetz webinterface...done.
Setting up virtual network interface ... done.
Disk spindown is disabled
nfsd is disabled
Starting dropbear SSH server...done.
Looking for user 'ftp' ... found
vsftpd is disabled
httpd-wol is disabled
Looking for group 'openvpn' ... found
Looking for user 'openvpn' ... found
Starting openvpn ... failed.
samba is disabled
Setting up SSH authorized_keys for root ...initialized.
Looking for group 'dns2tcp' ... found
Looking for user 'dns2tcp' ... found
dns2tcp is disabled
hd-idle is disabled
Starting AVM-Plugins...webdav...done.
swap is disabled

Code:

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
FREETZ_TYPE_FON_WLAN_7270=y
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_FON_WLAN_7270_16MB=y
# FREETZ_TYPE_LABOR is not set
# FREETZ_TYPE_LABOR_DSL is not set
# FREETZ_TYPE_LABOR_IPV6 is not set
# FREETZ_TYPE_LABOR_PHONE is not set
# FREETZ_TYPE_LABOR_CORE is not set
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
# FREETZ_REPLACE_KERNEL is not set
FREETZ_SHOW_ADVANCED=y
# FREETZ_TARGET_IPV6_SUPPORT is not set
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_PATCH_DSL_EXPERT is not set
# FREETZ_PATCH_ENUM is not set
# FREETZ_PATCH_SIGNED is not set
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
# FREETZ_AUTOMOUNT_EXT2 is not set
# FREETZ_AUTOMOUNT_EXT3 is not set
FREETZ_AUTOMOUNT_NTFS=y
# FREETZ_AUTOMOUNT_REISER_FS is not set
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PATCH_MAXDEVCOUNT=y
FREETZ_PATCH_MULTIPLE_PRINTERS=y
# FREETZ_PATCH_GETCONS is not set
# FREETZ_REMOVE_SUPPORT is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_AVM_VPN is not set
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_DECT is not set
# FREETZ_REMOVE_DTRACE is not set
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_ADD_ANNEX_A_FIRMWARE is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNSMASQ is not set
FREETZ_PACKAGE_DROPBEAR=y
# FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY is not set
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
FREETZ_PACKAGE_NANO=y

#
# Nano additional features
#
FREETZ_PACKAGE_NANO_TINY=y
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
FREETZ_PACKAGE_NTFS=y
# FREETZ_PACKAGE_OPENNTPD is not set
FREETZ_PACKAGE_OPENVPN=y
FREETZ_PACKAGE_OPENVPN_STATIC=y
FREETZ_PACKAGE_OPENVPN_WITH_LZO=y
FREETZ_PACKAGE_OPENVPN_WITH_MGMNT=y
FREETZ_PACKAGE_OPENVPN_ENABLE_SMALL=y
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
FREETZ_PACKAGE_VSFTPD=y
FREETZ_PACKAGE_VSFTPD_WITH_SSL=y
FREETZ_PACKAGE_VSFTPD_STATIC=y

#
# Web interface
#
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_AVM_FIREWALL=y
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
FREETZ_PACKAGE_NFSD_CGI=y
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
FREETZ_PACKAGE_SPINDOWN_CGI=y
FREETZ_PACKAGE_SG3UTILS=y
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
FREETZ_PACKAGE_VIRTUALIP_CGI=y
FREETZ_PACKAGE_WOL_CGI=y

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
FREETZ_PACKAGE_DNS2TCP=y
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DTACH is not set
FREETZ_PACKAGE_E2FSPROGS=y
FREETZ_PACKAGE_E2FSPROGS_E2FSCK=y
# FREETZ_PACKAGE_E2FSPROGS_E2MAKING is not set
# FREETZ_PACKAGE_E2FSPROGS_E2TUNING is not set
# FREETZ_PACKAGE_E2FSPROGS_E2DEBUG is not set
# FREETZ_PACKAGE_E2FSPROGS_E2FIXING is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
FREETZ_PACKAGE_HD_IDLE=y
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
FREETZ_PACKAGE_NFS_UTILS=y
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_SSHD is not set
# FREETZ_PACKAGE_OPENSSH_CLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SCP is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_SFTPCLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PHP is not set
FREETZ_PACKAGE_PORTMAP=y
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
FREETZ_PACKAGE_TCP_WRAPPERS=y
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
FREETZ_PACKAGE_USBROOT=y
FREETZ_PACKAGE_USBROOT_E2FSCK=y
FREETZ_PACKAGE_VIM=y
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270.54.04.76.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
# FREETZ_SUBVERSION_STRING is not set
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""
# FREETZ_CUSTOM_IMAGE_NAME is not set

#
# Info pages
#
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
# FREETZ_REMOVE_DOT_CONFIG is not set
FREETZ_AVMPLUGINS_ENABLED=y

#
# Plugin selection
#

#
# Select plugin(s) for insertion
#
FREETZ_AVMPLUGINS_MEDIASRV=y
FREETZ_AVMPLUGINS_MINI=y
FREETZ_AVMPLUGINS_NTFS=y
FREETZ_AVMPLUGINS_ONLINEPB=y
FREETZ_AVMPLUGINS_SAMBA=y
FREETZ_AVMPLUGINS_TAM=y
FREETZ_AVMPLUGINS_WEBDAV=y

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV_RENAME is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# Kernel modules
#

#
# crypto
#
# FREETZ_MODULE_crypto_algapi is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_blkcipher is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_cryptomgr is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_musb_hdrc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext3 is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
# FREETZ_MODULE_jbd is not set
FREETZ_MODULE_lockd=y
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
# FREETZ_MODULE_nfs is not set
FREETZ_MODULE_nls_cp437=y
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
FREETZ_MODULE_nls_iso8859_1=y
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
FREETZ_MODULE_sunrpc=y

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GMP ------------------------------------
#
# FREETZ_LIB_libgmp is not set

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
# FREETZ_LIB_libcrypto is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
FREETZ_LIB_libncurses=y

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
FREETZ_SHARE_terminfo=y
# FREETZ_SHARE_terminfo_showall is not set
FREETZ_SHARE_terminfo_ansi=y
FREETZ_SHARE_terminfo_gnome=y
FREETZ_SHARE_terminfo_konsole=y
FREETZ_SHARE_terminfo_linux=y
FREETZ_SHARE_terminfo_putty=y
FREETZ_SHARE_terminfo_rxvt=y
FREETZ_SHARE_terminfo_screen=y
FREETZ_SHARE_terminfo_screenMINUSw=y
FREETZ_SHARE_terminfo_sun=y
FREETZ_SHARE_terminfo_vt100=y
FREETZ_SHARE_terminfo_vt102=y
FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
FREETZ_SHARE_terminfo_vt102MINUSw=y
FREETZ_SHARE_terminfo_vt200=y
FREETZ_SHARE_terminfo_vt220=y
FREETZ_SHARE_terminfo_vt52=y
FREETZ_SHARE_terminfo_xterm=y
FREETZ_SHARE_terminfo_xtermMINUScolor=y
FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
# FREETZ_LIB_libcapi20 is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set

#
# Compiler options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_KERNEL_VERSION_2_6_13_1 is not set
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_30 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

Firmware:

Code:

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_7270_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
FREETZ_TYPE_FON_WLAN_7270=y
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_FON_WLAN_7270_16MB=y
# FREETZ_TYPE_LABOR is not set
# FREETZ_TYPE_LABOR_DSL is not set
# FREETZ_TYPE_LABOR_IPV6 is not set
# FREETZ_TYPE_LABOR_PHONE is not set
# FREETZ_TYPE_LABOR_CORE is not set
FREETZ_AVM_VERSION_STRING="7270_04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7270"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
# FREETZ_REPLACE_KERNEL is not set
FREETZ_SHOW_ADVANCED=y
# FREETZ_TARGET_IPV6_SUPPORT is not set
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ur8"
FREETZ_KERNEL_MTD_SIZE=246
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_PATCH_DSL_EXPERT is not set
# FREETZ_PATCH_ENUM is not set
# FREETZ_PATCH_SIGNED is not set
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
# FREETZ_AUTOMOUNT_EXT2 is not set
# FREETZ_AUTOMOUNT_EXT3 is not set
FREETZ_AUTOMOUNT_NTFS=y
# FREETZ_AUTOMOUNT_REISER_FS is not set
FREETZ_AUTORUN_AUTOEND=y
FREETZ_PATCH_MAXDEVCOUNT=y
FREETZ_PATCH_MULTIPLE_PRINTERS=y
# FREETZ_PATCH_GETCONS is not set
# FREETZ_REMOVE_SUPPORT is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_AVM_VPN is not set
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_DECT is not set
# FREETZ_REMOVE_DTRACE is not set
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set
# FREETZ_REMOVE_ANNEX_B_FIRMWARE is not set
# FREETZ_ADD_ANNEX_A_FIRMWARE is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNSMASQ is not set
FREETZ_PACKAGE_DROPBEAR=y
# FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY is not set
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
FREETZ_PACKAGE_NANO=y

#
# Nano additional features
#
FREETZ_PACKAGE_NANO_TINY=y
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
FREETZ_PACKAGE_NTFS=y
# FREETZ_PACKAGE_OPENNTPD is not set
FREETZ_PACKAGE_OPENVPN=y
FREETZ_PACKAGE_OPENVPN_STATIC=y
FREETZ_PACKAGE_OPENVPN_WITH_LZO=y
FREETZ_PACKAGE_OPENVPN_WITH_MGMNT=y
FREETZ_PACKAGE_OPENVPN_ENABLE_SMALL=y
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
FREETZ_PACKAGE_VSFTPD=y
FREETZ_PACKAGE_VSFTPD_WITH_SSL=y
FREETZ_PACKAGE_VSFTPD_STATIC=y

#
# Web interface
#
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_AVM_FIREWALL=y
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
FREETZ_PACKAGE_NFSD_CGI=y
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
FREETZ_PACKAGE_SPINDOWN_CGI=y
FREETZ_PACKAGE_SG3UTILS=y
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
FREETZ_PACKAGE_VIRTUALIP_CGI=y
FREETZ_PACKAGE_WOL_CGI=y

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
FREETZ_PACKAGE_DNS2TCP=y
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DTACH is not set
FREETZ_PACKAGE_E2FSPROGS=y
FREETZ_PACKAGE_E2FSPROGS_E2FSCK=y
# FREETZ_PACKAGE_E2FSPROGS_E2MAKING is not set
# FREETZ_PACKAGE_E2FSPROGS_E2TUNING is not set
# FREETZ_PACKAGE_E2FSPROGS_E2DEBUG is not set
# FREETZ_PACKAGE_E2FSPROGS_E2FIXING is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FORTUNE is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
FREETZ_PACKAGE_HD_IDLE=y
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
FREETZ_PACKAGE_NFS_UTILS=y
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_SSHD is not set
# FREETZ_PACKAGE_OPENSSH_CLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SCP is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_SFTPCLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PHP is not set
FREETZ_PACKAGE_PORTMAP=y
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
FREETZ_PACKAGE_TCP_WRAPPERS=y
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
FREETZ_PACKAGE_USBROOT=y
FREETZ_PACKAGE_USBROOT_E2FSCK=y
FREETZ_PACKAGE_VIM=y
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7270.54.04.76.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_SECURITY_LEVEL=1
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
# FREETZ_SUBVERSION_STRING is not set
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_USER_DEFINED_COMMENT=""
# FREETZ_CUSTOM_IMAGE_NAME is not set

#
# Info pages
#
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
# FREETZ_REMOVE_DOT_CONFIG is not set
FREETZ_AVMPLUGINS_ENABLED=y

#
# Plugin selection
#

#
# Select plugin(s) for insertion
#
FREETZ_AVMPLUGINS_MEDIASRV=y
FREETZ_AVMPLUGINS_MINI=y
FREETZ_AVMPLUGINS_NTFS=y
FREETZ_AVMPLUGINS_ONLINEPB=y
FREETZ_AVMPLUGINS_SAMBA=y
FREETZ_AVMPLUGINS_TAM=y
FREETZ_AVMPLUGINS_WEBDAV=y

#
# External
#
# EXTERNAL_ENABLED is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV_RENAME is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# Kernel modules
#

#
# crypto
#
# FREETZ_MODULE_crypto_algapi is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_blkcipher is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_cryptomgr is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_musb_hdrc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext3 is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
FREETZ_MODULE_fuse=y
# FREETZ_MODULE_jbd is not set
FREETZ_MODULE_lockd=y
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set
FREETZ_MODULE_nfsd=y
FREETZ_MODULE_exportfs=y
# FREETZ_MODULE_nfs is not set
FREETZ_MODULE_nls_cp437=y
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
FREETZ_MODULE_nls_iso8859_1=y
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
FREETZ_MODULE_sunrpc=y

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GMP ------------------------------------
#
# FREETZ_LIB_libgmp is not set

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
# FREETZ_LIB_libcrypto is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
FREETZ_LIB_libncurses=y

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
FREETZ_SHARE_terminfo=y
# FREETZ_SHARE_terminfo_showall is not set
FREETZ_SHARE_terminfo_ansi=y
FREETZ_SHARE_terminfo_gnome=y
FREETZ_SHARE_terminfo_konsole=y
FREETZ_SHARE_terminfo_linux=y
FREETZ_SHARE_terminfo_putty=y
FREETZ_SHARE_terminfo_rxvt=y
FREETZ_SHARE_terminfo_screen=y
FREETZ_SHARE_terminfo_screenMINUSw=y
FREETZ_SHARE_terminfo_sun=y
FREETZ_SHARE_terminfo_vt100=y
FREETZ_SHARE_terminfo_vt102=y
FREETZ_SHARE_terminfo_vt102MINUSnsgr=y
FREETZ_SHARE_terminfo_vt102MINUSw=y
FREETZ_SHARE_terminfo_vt200=y
FREETZ_SHARE_terminfo_vt220=y
FREETZ_SHARE_terminfo_vt52=y
FREETZ_SHARE_terminfo_xterm=y
FREETZ_SHARE_terminfo_xtermMINUScolor=y
FREETZ_SHARE_terminfo_xtermMINUSxfree86=y
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
# FREETZ_LIB_libcapi20 is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set

#
# Compiler options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_KERNEL_VERSION_2_6_13_1 is not set
FREETZ_KERNEL_VERSION_2_6_19_2=y
FREETZ_KERNEL_VERSION="2.6.19.2"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_4_UCLIBC_0_9_29=y
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_3_3_UCLIBC_0_9_30 is not set
FREETZ_TARGET_GCC_VERSION="4.2.4"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.18"
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

Freetz-Konfiguration:

Code:

Patches:	Pakete:	Module:	Libraries:
AUTOMOUNT
> NTFS
AUTORUN_AUTOEND
MAXDEVCOUNT
MULTIPLE_PRINTERS
USBSTORAGE
	AUTHORIZED-KEYS
AVM-FIREWALL
DNS2TCP
DROPBEAR
> DISABLE_HOST_LOOKUP
> WITH_ZLIB
E2FSPROGS
> E2FSCK
> E2MAKING
> E2TUNING
FSTYP
HASERL
> IDLE
MODCGI
NANO
> TINY
> UTILS
NMBD
NTFS
OPENVPN
> ENABLE_SMALL
> STATIC
> WITH_LZO
> WITH_MGMNT
PORTMAP
SAMBA
SG3UTILS
> WRAPPERS
USBROOT
> E2FSCK
VIM
VSFTPD
> STATIC
> WITH_SSL
	exportfs
fuse
lockd
nfsd
nls_cp437
nls_iso8859_1
sunrpc
	ld_uClibc
libcrypt
libdl
libfreetz
libgcc_s
libm
libncurses
libnsl
libpthread
librt
libuClibc
libutil
libz
Entfernt:	CGI-Pakete:
	NFSD
SPINDOWN
VIRTUALIP
WOL

Sys-Log:

Code:

Jan  1 01:00:51 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan  1 01:00:51 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan  1 01:00:51 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan  1 01:00:51 fritz user.warn kernel: Determined physical RAM map:
Jan  1 01:00:51 fritz user.warn kernel:  memory: 03fc0000 @ 14000000 (usable)
Jan  1 01:00:51 fritz user.warn kernel:  memory: 00040000 @ 17fc0000 (reserved)
Jan  1 01:00:51 fritz user.warn kernel: [init_bootmem]
Jan  1 01:00:51 fritz user.warn kernel: [free_bootmem]
Jan  1 01:00:51 fritz user.warn kernel: [reserve_bootmem]
Jan  1 01:00:51 fritz user.debug kernel: On node 0 totalpages: 98240
Jan  1 01:00:51 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan  1 01:00:51 fritz user.err kernel: [mem_map-hack]: move map base from 0x94328000 to 0x940a8000
Jan  1 01:00:51 fritz user.debug kernel:   DMA zone: 767 pages used for memmap
Jan  1 01:00:51 fritz user.debug kernel:   DMA zone: 0 pages reserved
Jan  1 01:00:51 fritz user.debug kernel:   DMA zone: 97473 pages, LIFO batch:31
Jan  1 01:00:51 fritz user.debug kernel:   Normal zone: 0 pages used for memmap
Jan  1 01:00:51 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17fc0000
Jan  1 01:00:51 fritz user.err kernel: [request_resource] Kernel data: start 0x14207790 < root->start 0x17fc0000
Jan  1 01:00:51 fritz user.warn kernel: Built 1 zonelists.  Total pages: 97473
Jan  1 01:00:51 fritz user.notice kernel: Kernel command line: usbroot=/dev/sda1:ntfs:/ ro,noatime,nodiratime console=ttyS0,38400n8r
Jan  1 01:00:51 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan  1 01:00:51 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan  1 01:00:51 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 01:00:51 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 01:00:51 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan  1 01:00:51 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan  1 01:00:51 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan  1 01:00:51 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan  1 01:00:51 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan  1 01:00:51 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 01:00:51 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 01:00:51 fritz user.warn kernel: [free_all_bootmem]
Jan  1 01:00:51 fritz user.info kernel: Memory: 61056k/65280k available (2077k kernel code, 4136k reserved, 642k data, 140k init, 0k highmem)
Jan  1 01:00:51 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan  1 01:00:51 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan  1 01:00:51 fritz user.warn kernel: Checking for 'wait' instruction...  available.
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 16
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init]
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan  1 01:00:51 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan  1 01:00:51 fritz user.err kernel: Master and Slave Enabled
Jan  1 01:00:51 fritz user.info kernel: pktsched: using high resolution timer
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 2
Jan  1 01:00:51 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 01:00:51 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 01:00:51 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 01:00:51 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan  1 01:00:51 fritz user.info kernel: TCP reno registered
Jan  1 01:00:51 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan  1 01:00:51 fritz user.info kernel: Installing knfsd (copyright (C) 1996 [email protected]).
Jan  1 01:00:51 fritz user.warn kernel: fuse init (API
Jan  1 01:00:51 fritz user.info kernel:  version 7.8)
Jan  1 01:00:51 fritz user.info kernel: io scheduler noop registered (default)
Jan  1 01:00:51 fritz user.info kernel: avm_net_trace: Up and running.
Jan  1 01:00:51 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio 
Jan  1 01:00:51 fritz user.warn kernel: 
Jan  1 01:00:51 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Jun 23 2009 16:19:44)
Jan  1 01:00:51 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan  1 01:00:51 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan  1 01:00:51 fritz user.err kernel: [cpmac] Version: URL: svn://EmbeddedVM/home/SVN/drivers/cpmac/tags/1.110-r820-trunk-VLAN_Fix_ADM_und_Tantos  -  Revision 538:821  -  Di 23. Jun 16:20:50 CEST 2009 
Jan  1 01:00:51 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan  1 01:00:51 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 01:00:51 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan  1 01:00:51 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan  1 01:00:51 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan  1 01:00:51 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 01:00:51 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan  1 01:00:51 fritz user.notice kernel: number of CFI chips: 1
Jan  1 01:00:51 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan  1 01:00:51 fritz user.notice kernel: RedBoot partition parsing not available
Jan  1 01:00:51 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97f6243c
Jan  1 01:00:51 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan  1 01:00:51 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xbc0000, size 3932160
Jan  1 01:00:51 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97f6243c
Jan  1 01:00:51 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan  1 01:00:51 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan  1 01:00:51 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0x103200
Jan  1 01:00:51 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan  1 01:00:51 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan  1 01:00:51 fritz user.notice kernel: 0x00103200-0x00f80000 : "rootfs"
Jan  1 01:00:51 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan  1 01:00:51 fritz user.notice kernel: 0x00020000-0x00103200 : "kernel"
Jan  1 01:00:51 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan  1 01:00:51 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan  1 01:00:51 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan  1 01:00:51 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan  1 01:00:51 fritz user.notice kernel: 0x00bc0000-0x00f80000 : "jffs2"
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan  1 01:00:51 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan  1 01:00:51 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:00:51 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan  1 01:00:51 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan  1 01:00:51 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan  1 01:00:51 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan  1 01:00:51 fritz user.info kernel: TCP cubic registered
Jan  1 01:00:51 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 1
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 17
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 8
Jan  1 01:00:51 fritz user.info kernel: NET: Registered protocol family 20
Jan  1 01:00:51 fritz user.warn kernel: MUSB UR8 pdev active!
Jan  1 01:00:51 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan  1 01:00:51 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan  1 01:00:51 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan  1 01:00:51 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan  1 01:00:51 fritz user.err kernel: PCI_BE_INT_En: 0
Jan  1 01:00:51 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan  1 01:00:51 fritz user.err kernel: [pci_int_init] done
Jan  1 01:00:51 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:00:51 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan  1 01:00:51 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)
Jan  1 01:00:51 fritz user.info kernel: Adam2 environment variables API installed.
Jan  1 01:00:51 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan  1 01:00:51 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:00:51 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan  1 01:00:51 fritz user.info kernel: Freeing unused kernel memory: 140k freed
Jan  1 01:00:51 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:00:51 fritz user.warn kernel: TFFS Name Table F
Jan  1 01:00:51 fritz user.warn kernel: led_modul_Fritz_Box_7270: module license '
Jan  1 01:00:51 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan  1 01:00:51 fritz user.warn kernel: ' taintskernel.
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] g
Jan  1 01:00:51 fritz user.info kernel: pio 28 name wlan
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan  1 01:00:51 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual2
Jan  1 01:00:51 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan  1 01:00:51 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan  1 01:00:51 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan  1 01:00:51 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan  1 01:00:51 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan  1 01:00:51 fritz user.warn kernel: patch_dectfw: patch_adress: 7094 max_len: 22 with Version 2 Len: 16
Jan  1 01:00:51 fritz user.warn kernel: patch_dectfw: c0068000, datalen = 32159, 
Jan  1 01:00:51 fritz user.warn kernel: 
Jan  1 01:00:51 fritz user.warn kernel: **************************************************************
Jan  1 01:00:51 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan  1 01:00:51 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan  1 01:00:51 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan  1 01:00:51 fritz user.warn kernel: [piglet]TDM: FS: 7990 Hz CLK:2047820 Hz
Jan  1 01:00:51 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan  1 01:00:51 fritz user.warn kernel: 
Jan  1 01:00:51 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan  1 01:00:52 fritz authpriv.info dropbear[1510]: Running in background
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: OpenVPN 2.1_rc20 mipsel-linux [SSL] [LZO2] [EPOLL] built on Oct  3 2009
Jan  1 01:00:55 fritz daemon.warn openvpn[1579]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: Static Encrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: Static Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: Static Decrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: Static Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:00:55 fritz daemon.err openvpn[1579]: TCP/UDP: Socket bind failed on local address [undef]:443: Address already in use
Jan  1 01:00:55 fritz daemon.notice openvpn[1579]: Exiting
Jan  1 01:01:08 fritz daemon.info chronyd[1679]: chronyd version 1.23 starting
Jan  1 01:01:08 fritz daemon.info chronyd[1679]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan  1 01:01:08 fritz daemon.info chronyd[1679]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan  1 01:01:08 fritz daemon.info chronyd[1679]: Linux kernel major=2 minor=6 patch=19
Jan  1 01:01:08 fritz daemon.info chronyd[1679]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan  1 01:01:09 fritz daemon.info chronyd[1679]: System's initial offset : 307894890.231254 seconds slow of true (step)
Oct  3 16:22:40 fritz user.err telefon[1277]: set initial telefon time from linux time to 16:22 3.10 2009!
Oct  3 16:23:39 fritz daemon.info chronyd[1679]: Trimming RTC, error = -1254583313.466 seconds
Oct  3 16:23:42 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 IEEE 802.11: associated
Oct  3 16:23:42 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 WPA: pairwise key handshake completed (RSN)

Was kann ich noch probieren?
Bzw. was mache ich falsch?

Grüße,

Nelix

olistudent · 3 Okt 2009

Hi.

Was siehst du, wenn du im telnet " cat /proc/partitions" eingibst? Mit und ohne Platte?

Was zeigt er bei "fstyp /dev/sda1" an? (mit Platte)

Mfg Oliver

Nelix · 3 Okt 2009

[Edit frank_m24: Mehrere Beiträge zusammengefasst. Man kann seine Beiträge auch editieren.]
Hallo!

Habe die Platte noch einmal überprüft:
Anscheinend war aus unbekanntem Grund das NTFS-Filesystem kaputt. HAbe die Platte neu formatiert (NTFS) und wieder angehängt. Sie wurde erkannt (unter AVM und unter Freetz).

Dann habe ich per FileZilla und "ftpuser" Ordner auf der Platte erstellen wollen, um vsftp einzurichten. Ein paar Ordner konnte ich erstellen, dann ist die Verbindung abgebrochen. Sie läßt sich auch nicht mehr herstellen.

Sys-log:

Code:

Oct  3 17:00:03 fritz syslog.info syslogd started: BusyBox v1.12.4
Oct  3 17:00:03 fritz user.notice kernel: klogd started: BusyBox v1.12.4 (2009-10-03 14:08:17 CEST)
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:18 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  3 17:04:19 fritz daemon.notice ntfs-3g[1830]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  3 17:04:19 fritz ftp.err ftpd[3148]: got signal Terminated
Oct  3 17:04:20 fritz daemon.notice ntfs-3g[1830]: Unmounting /dev/sda1 (Volume)
Oct  3 17:04:23 fritz daemon.err inetd[1156]: can't extend file limit, max = 1024
Oct  3 17:04:23 fritz daemon.err inetd[1156]: can't extend file limit, max = 1024
Oct  3 17:04:26 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 WPA: group key handshake completed (RSN)
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Version 2009.4.4 integrated FUSE 27
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Mounted /dev/sda1 (Read-Write, label "Volume", NTFS 3.1)
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Cmdline options: rw,force,locale=de_DE.ISO-8859-1
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Mount options: rw,force,silent,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096
Oct  3 17:05:40 fritz daemon.err inetd[1156]: can't extend file limit, max = 1024
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:40 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:41 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:41 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:41 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:41 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:42 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:42 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:44 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:44 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:46 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:46 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:48 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:48 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:05:50 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:06:11 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:06:32 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:06:53 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:07:15 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:07:36 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:07:57 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:08:16 fritz daemon.info hostapd: ath0: STA 00:0e:35:c5:bc:a3 IEEE 802.11: disassociated
Oct  3 17:08:16 fritz daemon.info hostapd: ath0: STA 00:0e:35:c5:bc:a3 IEEE 802.11: associated
Oct  3 17:08:17 fritz daemon.info hostapd: ath0: STA 00:0e:35:c5:bc:a3 WPA: pairwise key handshake completed (RSN)
Oct  3 17:08:18 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:08:39 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error

Woran liegt das?

NElix

[Beitrag 2:]
Hallo nochmal!

Unter AVM schein die Platte noch eingebunden zu sein (keine Fehlermeldung). Ich kann aber nicht per FTP drauf zugreifen, so wie es kurz vorher noch geklappt hat.

Code:

/var/mod/root # cat /proc/partitions
major minor  #blocks  name

  31     0      14835 mtdblock0
  31     1        908 mtdblock1
  31     2        128 mtdblock2
  31     3        256 mtdblock3
  31     4        256 mtdblock4
  31     5       3840 mtdblock5
   8     0  312571224 sda
   8     1  312568641 sda1
/var/mod/root #

Code:

/var/mod/root # fstyp /dev/sda1
ntfs
/var/mod/root #

Das jetzt also beides MIT Platte.

Aber kein Zugriff möglich.

NElix

[Beitrag 3:]
Hallo!

Noch ein Log:

Code:

Oct  3 17:15:19 fritz syslog.info syslogd started: BusyBox v1.12.4
Oct  3 17:15:19 fritz user.notice kernel: klogd started: BusyBox v1.12.4 (2009-10-03 14:08:17 CEST)
Oct  3 17:15:43 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:16:04 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:16:25 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:16:46 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:17:07 fritz daemon.notice ntfs-3g[3536]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error

Nelix

[Beitrag 4:]
Hallo nochmal!

Nach eine Reboot jann ich wieder per Filezilla zugreifen, jedoch keine Ordner erstellen - wie es vorher funktionierte.

Code:

Jan  1 01:00:58 fritz daemon.info chronyd[1610]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: OpenVPN 2.1_rc20 mipsel-linux [SSL] [LZO2] [EPOLL] built on Oct  3 2009
Jan  1 01:00:59 fritz daemon.warn openvpn[1670]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: Static Encrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: Static Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: Static Decrypt: Cipher 'AES-128-CBC' initialized with 128 bit key
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: Static Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Jan  1 01:00:59 fritz daemon.err openvpn[1670]: TCP/UDP: Socket bind failed on local address [undef]:443: Address already in use
Jan  1 01:00:59 fritz daemon.notice openvpn[1670]: Exiting
Jan  1 01:01:00 fritz daemon.info chronyd[1610]: System's initial offset : 307898357.404675 seconds slow of true (step)
Oct  3 17:20:17 fritz user.err telefon[1267]: set initial telefon time from linux time to 17:20 3.10 2009!
Oct  3 17:20:36 fritz daemon.notice ntfs-3g[1715]: Version 2009.4.4 integrated FUSE 27
Oct  3 17:20:36 fritz daemon.notice ntfs-3g[1715]: Mounted /dev/sda1 (Read-Write, label "Volume", NTFS 3.1)
Oct  3 17:20:36 fritz daemon.notice ntfs-3g[1715]: Cmdline options: rw,force,locale=de_DE.ISO-8859-1
Oct  3 17:20:36 fritz daemon.notice ntfs-3g[1715]: Mount options: rw,force,silent,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096
Oct  3 17:20:37 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:37 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:37 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:38 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:38 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:38 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:38 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:39 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:39 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:41 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:41 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:45 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:45 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:20:48 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:21:09 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:21:15 fritz daemon.info chronyd[1610]: Trimming RTC, error = -1254586780.656 seconds
Oct  3 17:21:19 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 IEEE 802.11: associated
Oct  3 17:21:19 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 WPA: pairwise key handshake completed (RSN)
Oct  3 17:21:23 fritz daemon.info hostapd: ath0: STA 00:0e:35:c5:bc:a3 IEEE 802.11: associated
Oct  3 17:21:23 fritz daemon.info hostapd: ath0: STA 00:0e:35:c5:bc:a3 WPA: pairwise key handshake completed (RSN)
Oct  3 17:21:30 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:21:51 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:22:12 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:22:33 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:22:54 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Corrupt index block signature: vcn 0 inode 5
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Index lookup failed, inode 5: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Failed to sync FILE_NAME (inode 5): Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:11 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:12 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:12 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:12 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:15 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:18 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:19 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:28 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:28 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Corrupt index block signature: vcn 0 inode 5
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Failed to find place for new entry: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Failed to add entry to the index: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Corrupt index block signature: vcn 0 inode 5
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Failed to find place for new entry: Input/output error
Oct  3 17:23:29 fritz daemon.notice ntfs-3g[1715]: Failed to add entry to the index: Input/output error
Oct  3 17:23:35 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:36 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:43 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:58 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Corrupt index block signature: vcn 0 inode 5
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Failed to find place for new entry: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Failed to add entry to the index: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Incomplete multi-sector transfer: magic: 0x58444e49  size: 4096  usa_ofs: 40  usa_count: 1  data: 0  usn: 22: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Corrupt index block signature: vcn 0 inode 5
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Failed to find place for new entry: Input/output error
Oct  3 17:23:59 fritz daemon.notice ntfs-3g[1715]: Failed to add entry to the index: Input/output error

Nelix

Silent-Tears · 3 Okt 2009

Und dein Filesystem ist wieder Schrott, wieso auch immer. Check das Dingen mal am Rechner, und steck sie wieder an/versuchs noch einmal.

Übrigens sind so viele Postings hintereinander ohne jemanden dazwischen nicht nur nicht gern gesehen, sondern schlicht nervig. Schon mal editieren versucht? Dann regt sich auch kein Mod auf...

Nelix · 3 Okt 2009

Hallo!

Ok, Danke für die Hinweise.

Habe die Platte von der 7270 abgezogen und an den PC gehängt. Schien in Ordnung zu sein. Alle Ordern wuren angezeigt und ich konnte auch ohne Probleme neue erstellen. Platte wieder vom PC abgehängt (sicher entfernt) und an die 7270 neu angehängt.
Keinen reboot gemacht.

Code:

/var/media/ftp/uStor01/shared # mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
dev on /dev type tmpfs (rw,nosuid)
proc on /proc type proc (rw,nosuid,nodev,noexec)
tmpfs on /var type tmpfs (rw)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)
/dev/mtdblock5 on /data type jffs2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /var/media/ftp/uStor01 type fuseblk (rw,user_id=0,group_id=0,allow_other)
/dev/sdb1 on /var/media/ftp/uStor11 type fuseblk (rw,user_id=0,group_id=0,allow_other)
/var/media/ftp/uStor01/shared #

Code:

/var/media/ftp/uStor01/shared # fstyp /dev/sda1
/var/media/ftp/uStor01/shared #

Code:

/var/media/ftp/uStor01/shared # cat /proc/partitions
major minor  #blocks  name

  31     0      14835 mtdblock0
  31     1        908 mtdblock1
  31     2        128 mtdblock2
  31     3        256 mtdblock3
  31     4        256 mtdblock4
  31     5       3840 mtdblock5
   8    16  312571224 sdb
   8    17  312568641 sdb1
/var/media/ftp/uStor01/shared #

Code:

/var/media/ftp/uStor01/shared # fstyp /dev/sdb1
ntfs
/var/media/ftp/uStor01/shared #

Kann mit Filezilla jetzt gar nicht zugreifen. Wohlmöglich weil jetzt als sdb01?

Was soll ich machen?

Nelix

Silent-Tears · 3 Okt 2009

Starte einfach mal die Box neu, dann hast du zumindest vorläufig wieder sda

Nelix · 3 Okt 2009

Hallo!

Ja, dann klappt es wieder.
ABER nach dem nächsten Reboot ist das Problem wieder da: "Es wurden 0 von 1 Partitionen eingebunden."

Code:

/var/mod/root # mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
dev on /dev type tmpfs (rw,nosuid)
proc on /proc type proc (rw,nosuid,nodev,noexec)
tmpfs on /var type tmpfs (rw)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec)
/dev/mtdblock5 on /data type jffs2 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/var/mod/root #

Code:

/var/mod/root # cat /proc/partitions
major minor  #blocks  name

  31     0      14835 mtdblock0
  31     1        908 mtdblock1
  31     2        128 mtdblock2
  31     3        256 mtdblock3
  31     4        256 mtdblock4
  31     5       3840 mtdblock5
   8     0  312571224 sda
   8     1  312568641 sda1
/var/mod/root #

Code:

/var/mod/root # fstyp /dev/sda1
ntfs
/var/mod/root #

Das ständige AB- und Anstecken der Hdd kann ja nicht die Lösung des Problems sein.

Oder ist sie jetzt nur nicht gemounted -> Wird bei "mount" nicht gelistet.

Nelix

Silent-Tears · 3 Okt 2009

Bei mount wird nur das aufgezeigt, was auch gemountet ist, und nicht der ganze andere Kram. Wieso auch?

Nelix · 3 Okt 2009

Hallo!

Ich habe aber das "Automount NTFS" mit "eingebaut" ins Image.

BEsteht noch irgendwie die Möglichkeit, die Hdd nachträglich zu mounten oder hilft wirklich nur manuelles abziehen und wieder anstecken?

Gibt es hier keine Lösung? Ist das ein schon bekanntes Problem oder ein neues?

Nelix

Silent-Tears · 3 Okt 2009

Ein bekanntes PRoblem wäre es, würde die Platte in den Spindown/standby/oder wie auch immer der Stromsparmechanismus heisst, der eingebaut ist, geht und dass das das System durcheinander bringt. Was mich wundert sind die Fehlermeldungen des ntfs-3g. Sagt mir, dass das Filesystem im Arsch ist, bzw. Probleme macht.

Nelix · 3 Okt 2009

Das mag sein, dass es so ist. Du kannst das sicher besser beurteilen, da Du deutlich mehr Ahnung von der Materie hast.

Aber wie geschrieben: Wenn ich die Platte abziehe und an den PC hänge, schein alles in Ordnung zu sein.

Nelix

Silent-Tears · 3 Okt 2009

Mach odch bitte noch einmal nen Check am Rechner, und sorg dafür dass jegliches Stromsparzeugs der Festplatte ausgestellt ist.

Nelix · 4 Okt 2009

Habe ich gemacht: chkdsk /f
Anscheinend war der MFT defekt. Unter XP hat es aber vorher ohne chkdsk funktioniert. Daher habe ich das nicht gesehen.

Nach Reparatur hat es auf der FB funktioniert - leider nur kurz.
Nach ein paar hin-und-her Kopieraktionen ist der MFT anscheinend wieder defekt:

Code:

Oct  4 00:41:47 fritz authpriv.info dropbear[1845]: Child connection from xx.xx.xxx.xxx:4619
Oct  4 00:41:54 fritz authpriv.notice dropbear[1845]: password auth succeeded for 'root' from xx.xx.xxx.xxx:4619
Oct  4 00:42:27 fritz ftp.info vsftpd[1897]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:42:34 fritz ftp.info vsftpd[1900]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:42:35 fritz ftp.info vsftpd[1902]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/shared/ABC_Logo2_4c_90%schwarz.tif", 507516 bytes, 4956.21Kbyte/sec
Oct  4 00:42:44 fritz ftp.info vsftpd[1903]: [user_x2] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:01 fritz ftp.info vsftpd[1912]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:06 fritz ftp.info vsftpd[1902]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/public/Ã½bersicht.xls", 14848 bytes, 145.00Kbyte/sec
Oct  4 00:43:12 fritz ftp.info vsftpd[1925]: [user_x2] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:25 fritz ftp.info vsftpd[1932]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:35 fritz ftp.info vsftpd[1941]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:40 fritz ftp.info vsftpd[1944]: [user_x2] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:43 fritz ftp.info vsftpd[1946]: [user_x2] OK DELETE: Client "xx.xx.xxx.xxx", "/public/Ã½bersicht.xls"
Oct  4 00:43:53 fritz ftp.info vsftpd[1957]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:43:58 fritz ftp.info vsftpd[1960]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:44:02 fritz daemon.notice ntfs-3g[1705]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  4 00:44:02 fritz daemon.notice ntfs-3g[1705]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  4 00:44:02 fritz daemon.notice ntfs-3g[1705]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  4 00:44:02 fritz daemon.notice ntfs-3g[1705]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  4 00:44:04 fritz daemon.notice ntfs-3g[1705]: Unmounting /dev/sda1 (Volume)
Oct  4 00:44:07 fritz ftp.info vsftpd[1962]: [user_x1] FAIL DOWNLOAD: Client "xx.xx.xxx.xxx", "/public/Ã½bersicht.xls", 0.00Kbyte/sec
Oct  4 00:44:39 fritz ftp.info vsftpd[2093]: [user_x2] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:44:51 fritz ftp.info vsftpd[2176]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 00:45:33 fritz daemon.notice ntfs-3g[2345]: Version 2009.4.4 integrated FUSE 27
Oct  4 00:45:33 fritz daemon.notice ntfs-3g[2345]: Mounted /dev/sdb1 (Read-Write, label "Volume", NTFS 3.1)
Oct  4 00:45:33 fritz daemon.notice ntfs-3g[2345]: Cmdline options: rw,force,locale=de_DE.ISO-8859-1
Oct  4 00:45:33 fritz daemon.notice ntfs-3g[2345]: Mount options: rw,force,silent,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
Oct  4 00:50:18 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 WPA: group key handshake completed (RSN)

Code:

/var/media/ftp # ls
ls: ./uStor01: Transport endpoint is not connected
uStor11
/var/media/ftp # cd uStor11

uStor01 ist nicht mehr auffindbar, dann anscheinend als uStor11 gemounted.
Damit kommt das FTP dann anscheinend nicht klar.

Irgendwas ist da sehr instabil.

Nelix

Silent-Tears · 4 Okt 2009

Klar, dass uStor01 nicht mehr gefunden wird, wenn aus sda (ebne uStor0) sdb wird (uStor1).
Und wieder ein Fehler im ntfs-3g. Kam das erst nach dem Sonderzeichenfile? Kannst du das mal verifizieren? Erst Files ohne sonderzeichen (Umlaute & co), ob der Fehler da schon auftaucht?

Nelix · 4 Okt 2009

Nein, scheint nichts mit Sonderzeichen zu tun zu haben.
Habe rebootet (ohne Ab- und Anstecken der Platte, also auch ohne chkdsk /f). Dann hat es wieder funktioniert. Ein paar Dateien (ohne Sonderzeichen) hin-und-her kopiert. Dann hat es wieder ausgesetzt.

Code:

Oct  4 00:57:59 fritz user.err telefon[1268]: set initial telefon time from linux time to 0:57 4.10 2009!
Oct  4 00:58:20 fritz daemon.notice ntfs-3g[1705]: Version 2009.4.4 integrated FUSE 27
Oct  4 00:58:20 fritz daemon.notice ntfs-3g[1705]: Mounted /dev/sda1 (Read-Write, label "Volume", NTFS 3.1)
Oct  4 00:58:20 fritz daemon.notice ntfs-3g[1705]: Cmdline options: rw,force,locale=de_DE.ISO-8859-1
Oct  4 00:58:20 fritz daemon.notice ntfs-3g[1705]: Mount options: rw,force,silent,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096
Oct  4 00:58:57 fritz daemon.info chronyd[1679]: Trimming RTC, error = -1254614240.246 seconds
Oct  4 00:58:59 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 IEEE 802.11: associated
Oct  4 00:58:59 fritz daemon.info hostapd: ath0: STA 00:14:c1:22:6e:d5 WPA: pairwise key handshake completed (RSN)
Oct  4 01:00:33 fritz ftp.info vsftpd[1854]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:00:47 fritz ftp.info vsftpd[1856]: [user_x1] OK DELETE: Client "xx.xx.xxx.xxx", "/Neu Textdokument.txt"
Oct  4 01:01:12 fritz ftp.info vsftpd[1873]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:01:13 fritz ftp.info vsftpd[1875]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/zaTunnel.zip", 130240 bytes, 1271.88Kbyte/sec
Oct  4 01:01:16 fritz ftp.info vsftpd[1875]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/public/zaTunnel.zip", 130240 bytes, 1271.88Kbyte/sec
Oct  4 01:01:20 fritz ftp.info vsftpd[1875]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/public/zaTunnelCab.zip", 243747 bytes, 2380.34Kbyte/sec
Oct  4 01:01:25 fritz ftp.info vsftpd[1875]: [user_x1] OK UPLOAD: Client "xx.xx.xxx.xxx", "/shared/zaTunnelSPCab.zip", 235043 bytes, 2295.34Kbyte/sec
Oct  4 01:01:28 fritz ftp.info vsftpd[1886]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:01:46 fritz ftp.info vsftpd[1894]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:02:21 fritz ftp.info vsftpd[1961]: [guest_x] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:02:33 fritz ftp.info vsftpd[1989]: [user_x2] OK LOGIN: Client "xx.xx.xxx.xxx"
Oct  4 01:02:49 fritz daemon.notice ntfs-3g[1705]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  4 01:02:49 fritz daemon.notice ntfs-3g[1705]: Failed to read of MFT, mft=88 count=1 br=-1: Input/output error
Oct  4 01:02:50 fritz daemon.notice ntfs-3g[1705]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  4 01:02:50 fritz daemon.notice ntfs-3g[1705]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  4 01:02:50 fritz daemon.notice ntfs-3g[1705]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Oct  4 01:02:50 fritz daemon.notice ntfs-3g[1705]: Failed to read of MFT, mft=5 count=1 br=-1: Input/output error
Oct  4 01:02:52 fritz daemon.notice ntfs-3g[1705]: Unmounting /dev/sda1 (Volume)
Oct  4 01:02:58 fritz authpriv.info dropbear[2123]: Child connection from xx.xx.xxx.xxx:xxxx
Oct  4 01:03:05 fritz authpriv.notice dropbear[2123]: password auth succeeded for 'root' from xx.xx.xxx.xxx:xxxx
Oct  4 01:03:30 fritz ftp.info vsftpd[2252]: [user_x1] OK LOGIN: Client "xx.xx.xxx.xxx"

Code:

ls: ./uStor01: Transport endpoint is not connected
uStor11
/var/media/ftp #

Nelix

Silent-Tears · 4 Okt 2009

Welche ntfs-Version nutzt du eigentlich? avm oder freetz?

Nelix · 4 Okt 2009

Äh, gute Frage.
Ich meine, ich habe unter
Patches
*Automount FS
*NTFS
Unter
Standart Packages
--- NTFS-3G 2009.4.4 (binary only)
Hier konnte ich gar kein "*" setzen, da dort fest "---" stand.

Unter
Advanced options
Integrate AVM Plugins into image
Plugin selection
* NTFS

Also habe ich wohl das von AVM, oder?
Sollte ich mal das von Freetz ausprobieren?
Wie stelle ich das um?

Nelix

Silent-Tears · 4 Okt 2009

Hmm, interessante Sache. Ich bin mir grad nicht sicher, welches du nun hast. Denn: ntfs-3g ist angehakt, und das wäre "unseres", aber das Plugin wird auch integriert, und eben dies ist das von AVM. Du darfst also nun Images basteln und damit anfangen, mal das "automount" rauszunehmen, und nur das von AVM ins Image zu packen, und dann zu verifizieren, was dann passiert. Ich nenne übrigens absichtlich diese Variante zuerst, denn wir nutzen die aktuelle Version, 2009.4.4, ebne wie du. Was AVM dort macht, weiss ich nicht.

officiallyme · 14 Okt 2009

also ich hab nicht ganz den gleichen fehler, aber bei mir wird mein 8gb usb stick gemountet und wenn ich dann 20-30min von dem stick auf einen client streame wird der stick unmounted und neu gemounted.

und ich muss den stick immer 3-5mal anstecken, bis er korrekt gemounted wird.
ist vielleicht einfach der ntfs treiber nicht so gut oder beisst er sich mit dem, den avm anbietet in der aktuellen firmware?

Silent-Tears · 14 Okt 2009

Da beisst sich nichts, weil ersetzt wird. Aber ohne ein Logfile kann dir Niemand helfen, sondern nur raten. Aber als Tipp: NTFS ist nicht wirklich das stabilste und performanteste Filesystem. Nutz doch mal eines, welches Linux von Haus aus kann ohne fuse-Module.

USB-Hdd (NTFS) wird nicht erkannt/eingebunden

Neuer User

Anhänge

IPPF-Urgestein

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Mitglied

IPPF-Promi

Statistik des Forums