Jan 1 01:00:53 fritz syslog.info syslogd started: BusyBox v1.12.4
Jan 1 01:00:53 fritz user.notice kernel: klogd started: BusyBox v1.12.4 (2009-09-12 12:25:54 CEST)
Jan 1 01:00:53 fritz user.notice kernel: Linux version 2.6.19.2 (2626) (gcc version 3.4.6) #14 Fri Nov 13 17:14:01 CET 2009
Jan 1 01:00:53 fritz user.warn kernel: cpu-probe: Manufacturer MIPS
Jan 1 01:00:53 fritz user.warn kernel: mips-config1: JTAG pressent
Jan 1 01:00:53 fritz user.warn kernel: mips-config1: TLB size 16
Jan 1 01:00:53 fritz user.warn kernel: mips-config3: Vectored interrupts implmented
Jan 1 01:00:53 fritz user.warn kernel: CPU revision is: 00019068
Jan 1 01:00:53 fritz user.err kernel: [mips_clock] default 360000000 MHz
Jan 1 01:00:53 fritz user.warn kernel: [ur8_clk_set_emif] SDRAM Refresh 0x3a8 Timing 0x2214717 Bank 0x21 Async 0xc42c301
Jan 1 01:00:53 fritz user.err kernel: [ur8_pci_init]
Jan 1 01:00:53 fritz user.err kernel: [pci] default: 33 MHz
Jan 1 01:00:53 fritz user.err kernel: [setup_pci_master]
Jan 1 01:00:53 fritz user.err kernel: [setup_pci_slave]
Jan 1 01:00:53 fritz user.err kernel: Exposing 67108864 memory over PCI
Jan 1 01:00:53 fritz user.err kernel: Setup Complete, Enabling PCI Interface
Jan 1 01:00:53 fritz user.err kernel: PCI Interface Running
Jan 1 01:00:53 fritz user.err kernel: PCI controller initialized
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.err kernel: [ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Jan 1 01:00:53 fritz user.warn kernel: Determined physical RAM map:
Jan 1 01:00:53 fritz user.warn kernel: memory: 03fc0000 @ 14000000 (usable)
Jan 1 01:00:53 fritz user.warn kernel: memory: 00040000 @ 17fc0000 (reserved)
Jan 1 01:00:53 fritz user.warn kernel: [init_bootmem]
Jan 1 01:00:53 fritz user.warn kernel: [free_bootmem]
Jan 1 01:00:53 fritz user.warn kernel: [reserve_bootmem]
Jan 1 01:00:53 fritz user.debug kernel: On node 0 totalpages: 98240
Jan 1 01:00:53 fritz user.err kernel: [mem_map-hack]: reduce size from 3145728 524288 Bytes
Jan 1 01:00:53 fritz user.err kernel: [mem_map-hack]: move map base from 0x94329000 to 0x940a9000
Jan 1 01:00:53 fritz user.debug kernel: DMA zone: 767 pages used for memmap
Jan 1 01:00:53 fritz user.debug kernel: DMA zone: 0 pages reserved
Jan 1 01:00:53 fritz user.debug kernel: DMA zone: 97473 pages, LIFO batch:31
Jan 1 01:00:53 fritz user.debug kernel: Normal zone: 0 pages used for memmap
Jan 1 01:00:53 fritz user.err kernel: [request_resource] Kernel code: start 0x14000000 < root->start 0x17fc0000
Jan 1 01:00:53 fritz user.err kernel: [request_resource] Kernel data: start 0x142089d0 < root->start 0x17fc0000
Jan 1 01:00:53 fritz user.warn kernel: Built 1 zonelists. Total pages: 97473
Jan 1 01:00:53 fritz user.notice kernel: Kernel command line: console=ttyS0,38400n8r
Jan 1 01:00:53 fritz user.warn kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan 1 01:00:53 fritz user.warn kernel: Primary data cache 16kB, 4-way, linesize 16 bytes.
Jan 1 01:00:53 fritz user.info kernel: Synthesized TLB refill handler (20 instructions).
Jan 1 01:00:53 fritz user.info kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan 1 01:00:53 fritz user.info kernel: Synthesized TLB store handler fastpath (32 instructions).
Jan 1 01:00:53 fritz user.info kernel: Synthesized TLB modify handler fastpath (31 instructions).
Jan 1 01:00:53 fritz user.warn kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Jan 1 01:00:53 fritz user.warn kernel: CPU frequency 360.00 MHz
Jan 1 01:00:53 fritz user.warn kernel: Using 180.000 MHz high precision timer.
Jan 1 01:00:53 fritz user.warn kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 01:00:53 fritz user.warn kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 01:00:53 fritz user.warn kernel: [free_all_bootmem]
Jan 1 01:00:53 fritz user.info kernel: Memory: 61056k/65280k available (2082k kernel code, 4140k reserved, 641k data, 140k init, 0k highmem)
Jan 1 01:00:53 fritz user.debug kernel: Calibrating delay loop... 359.62 BogoMIPS (lpj=1798144)
Jan 1 01:00:53 fritz user.warn kernel: Mount-cache hash table entries: 512
Jan 1 01:00:53 fritz user.warn kernel: Checking for 'wait' instruction... available.
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 16
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init]
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
Jan 1 01:00:53 fritz user.err kernel: pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Jan 1 01:00:53 fritz user.err kernel: Master and Slave Enabled
Jan 1 01:00:53 fritz user.info kernel: pktsched: using high resolution timer
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 2
Jan 1 01:00:53 fritz user.warn kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 01:00:53 fritz user.warn kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 1 01:00:53 fritz user.warn kernel: TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:53 fritz user.info kernel: TCP: Hash tables configured (established 16384 bind 8192)
Jan 1 01:00:53 fritz user.info kernel: TCP reno registered
Jan 1 01:00:53 fritz user.info kernel: squashfs: version 3.2 (2007/01/02) Phillip Lougher
Jan 1 01:00:53 fritz user.info kernel: Installing knfsd (copyright (C) 1996 [email protected]).
Jan 1 01:00:53 fritz user.warn kernel: fuse init (API version 7.8)
Jan 1 01:00:53 fritz user.info kernel: io scheduler noop registered
Jan 1 01:00:53 fritz user.info kernel: (default)
Jan 1 01:00:53 fritz user.info kernel: avm_net_trace: Up and running.
Jan 1 01:00:53 fritz user.warn kernel: [avm] configured: watchdog event debug enable direct gpio
Jan 1 01:00:53 fritz user.warn kernel:
Jan 1 01:00:53 fritz user.warn kernel: AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Nov 13 2009 17:13:28)
Jan 1 01:00:53 fritz user.info kernel: Serial: 8250/16550 driver $Revision: 1.3 $ 1 ports, IRQ sharing disabled
Jan 1 01:00:53 fritz user.info kernel: serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
Jan 1 01:00:53 fritz user.err kernel: [cpmac] Version: 1.123 - Revision 538:907 - Fr 13.11.2009 17:13:45
Jan 1 01:00:53 fritz user.err kernel: [dectsync] inactive
Jan 1 01:00:53 fritz user.err kernel: [cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Jan 1 01:00:53 fritz user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 01:00:53 fritz user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan 1 01:00:53 fritz user.notice kernel: physmap platform flash device: 01000001 at 10000000
Jan 1 01:00:53 fritz user.info kernel: physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Jan 1 01:00:53 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 1 01:00:53 fritz user.warn kernel: physmap-flash.1: CFI does not contain boot bank location. Assuming top.
Jan 1 01:00:53 fritz user.notice kernel: number of CFI chips: 1
Jan 1 01:00:53 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jan 1 01:00:53 fritz user.notice kernel: RedBoot partition parsing not available
Jan 1 01:00:53 fritz user.warn kernel: [ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97f6343c
Jan 1 01:00:53 fritz user.warn kernel: [ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
Jan 1 01:00:53 fritz user.warn kernel: [ur8_jffs2_parser_function] magic 20031985 found @pos 0xc60000, size 3276800
Jan 1 01:00:53 fritz user.warn kernel: [ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97f6343c
Jan 1 01:00:53 fritz user.warn kernel: [ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
Jan 1 01:00:53 fritz user.warn kernel: [ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
Jan 1 01:00:53 fritz user.warn kernel: [ur8_squashfs_parser_function] magic found @pos 0x103a00
Jan 1 01:00:53 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device physmap-flash.1
Jan 1 01:00:53 fritz user.notice kernel: Creating 6 MTD partitions on "physmap-flash.1":
Jan 1 01:00:53 fritz user.notice kernel: 0x00103a00-0x00f80000 : "rootfs"
Jan 1 01:00:53 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name rootfs
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] use rootfs
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
Jan 1 01:00:53 fritz user.notice kernel: 0x00020000-0x00103a00 : "kernel"
Jan 1 01:00:53 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name kernel
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] skip kernel
Jan 1 01:00:53 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader"
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name urlader
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] skip urlader
Jan 1 01:00:53 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)"
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (1)
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (1)
Jan 1 01:00:53 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)"
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name tffs (2)
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] skip tffs (2)
Jan 1 01:00:53 fritz user.notice kernel: 0x00c60000-0x00f80000 : "jffs2"
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] name jffs2
Jan 1 01:00:53 fritz user.warn kernel: [ur8_mtd_add_notifier] skip jffs2
Jan 1 01:00:53 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan 1 01:00:53 fritz user.err kernel: mtd-ram mtd-ram.2: no memory resource specified
Jan 1 01:00:53 fritz user.err kernel: [ur8_ram_mtd_set_rw] PLATRAM_RO
Jan 1 01:00:53 fritz user.warn kernel: mtd-ram: probe of mtd-ram.2 failed with error -2
Jan 1 01:00:53 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8
Jan 1 01:00:53 fritz user.info kernel: TCP cubic registered
Jan 1 01:00:53 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 8
Jan 1 01:00:53 fritz user.info kernel: NET: Registered protocol family 20
Jan 1 01:00:53 fritz user.warn kernel: MUSB UR8 pdev active!
Jan 1 01:00:53 fritz user.err kernel: PCI_STATUS_SET: 40000
Jan 1 01:00:53 fritz user.err kernel: PCI_STATUS_CLR: 40000
Jan 1 01:00:53 fritz user.err kernel: PCI_HOST_INT_EN: 0
Jan 1 01:00:53 fritz user.err kernel: PCI_HOST_INT_CLR: 0
Jan 1 01:00:53 fritz user.err kernel: PCI_BE_INT_En: 0
Jan 1 01:00:53 fritz user.err kernel: PCI_BE_INT_CLR: 0
Jan 1 01:00:53 fritz user.err kernel: [pci_int_init] done
Jan 1 01:00:53 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan 1 01:00:53 fritz user.info kernel: Time: MIPS clocksource has been installed.
Jan 1 01:00:53 fritz user.warn kernel: mount on mtd3 and mtd4 (double buffering)
Jan 1 01:00:53 fritz user.info kernel: Adam2 environment variables API installed.
Jan 1 01:00:53 fritz user.info kernel: [avm_new] push_button_gpio=25 value=0 enabled
Jan 1 01:00:53 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:53 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan 1 01:00:53 fritz user.info kernel: Freeing unused kernel memory: 140k freed
Jan 1 01:00:53 fritz user.err kernel: [4294937503]maxrun: 1
Jan 1 01:00:53 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan 1 01:00:53 fritz user.warn kernel: TFFS Name Table 1
Jan 1 01:00:53 fritz user.warn kernel: led_modul_Fritz_Box_7270: module license '
Jan 1 01:00:53 fritz user.warn kernel: (C) Copyright 2008 by AVM
Jan 1 01:00:53 fritz user.warn kernel: ' taintskernel.
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 1 name power
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 9 name internet
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 27 name festnetz
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 28 name wlan
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 17 name dual1
Jan 1 01:00:53 fritz user.warn kernel: [led_gpio_bit_drive
Jan 1 01:00:53 fritz user.info kernel: r_init] gpio 35 name dual2
Jan 1 01:00:53 fritz user.err kernel: [BUTTON] no buttons defined - disable new button controls
Jan 1 01:00:53 fritz user.err kernel: [LED] "wyatt_earp_turn_off_leds" (0x00000000) not loaded
Jan 1 01:00:53 fritz user.info kernel: [avm_new]push_button_ctrl: gpio=23 value=1 enabled
Jan 1 01:00:53 fritz user.info kernel: [avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
Jan 1 01:00:53 fritz user.warn kernel: patch_dectfw: patch_adress: 75cc max_len: 22 with Version 2 Len: 16
Jan 1 01:00:53 fritz user.warn kernel: patch_dectfw: c0068000, datalen = 32876,
Jan 1 01:00:53 fritz user.info kernel: [avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
Jan 1 01:00:53 fritz user.warn kernel:
Jan 1 01:00:53 fritz user.warn kernel: ****************************************************************
Jan 1 01:00:53 fritz user.err kernel: [4294938607]maxrun: 1
Jan 1 01:00:53 fritz user.warn kernel: dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
Jan 1 01:00:53 fritz user.err kernel: [piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
Jan 1 01:00:53 fritz user.err kernel: [piglet] Read 169291 bytes total from file
Jan 1 01:00:53 fritz user.warn kernel: [piglet]TDM: FS: 8000 Hz CLK:2047975 Hz
Jan 1 01:00:53 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Jan 1 01:00:53 fritz user.warn kernel: Empty flash at 0x002e0428 ends at 0x002f0000
Jan 1 01:00:53 fritz user.notice kernel: CLEANMARKER node found at 0x002f0000, not first node in block (0x002e0000)
Jan 1 01:00:53 fritz user.warn kernel:
Jan 1 01:00:53 fritz user.warn kernel: [avm_debug]redirect kernel-messages (/dev/debug)
Jan 1 01:00:54 fritz daemon.info chronyd[1493]: chronyd version 1.23 starting
Jan 1 01:00:54 fritz user.notice info: Reload VSFTPD due IP-change
Jan 1 01:00:56 fritz daemon.info chronyd[1493]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
Jan 1 01:00:56 fritz daemon.info chronyd[1493]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
Jan 1 01:00:56 fritz daemon.info chronyd[1493]: Linux kernel major=2 minor=6 patch=19
Jan 1 01:00:56 fritz daemon.info chronyd[1493]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan 1 01:00:57 fritz daemon.info chronyd[1493]: System's initial offset : 317419207.553609 seconds slow of true (step)
Jan 21 21:01:05 fritz daemon.info chronyd[1493]: Old system time Sat Jan 1 01:00:57 2000 (apply_step_offset)
Jan 21 21:01:05 fritz daemon.info chronyd[1493]: New system time Thu Jan 21 21:01:05 2010
Jan 21 21:01:06 fritz user.err telefon[1296]: set initial telefon time from linux time to 21:01 21.01 2010!
Jan 21 21:01:06 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:06 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:06 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:06 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:07 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:07 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:07 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:07 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:08 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:08 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:08 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:08 fritz daemon.warn chronyd[1493]: Could not send to 78.41.115.242 : Bad file descriptor
Jan 21 21:01:09 fritz cron.err crond[1426]: time disparity of 5290320 minutes detected
Jan 21 21:01:29 fritz daemon.info hostapd: ath0: STA 00:0e:35:fa:60:62 IEEE 802.11: associated
Jan 21 21:01:29 fritz daemon.info hostapd: ath0: STA 00:0e:35:fa:60:62 WPA: pairwise key handshake completed (RSN)
Jan 21 21:02:01 fritz daemon.info chronyd[1493]: Trimming RTC, error = -1264107631.419 seconds