- Mitglied seit
- 8 Feb 2010
- Beiträge
- 25
- Punkte für Reaktionen
- 0
- Punkte
- 0
Hallo zusammen
bin hier schon seit drei Tagen am probieren, unteranderem mit hilfe der hier im Forum befindlichen Beispiel .cfg und .vpn . Leider ohne Erfolg.
Erlaube mir meine .cfg von der 7390 hier rein zu schreiben
Im E7 steht unter VPN Protokoll immer abwechselnd:
Error: Received no respons from VPN gateway "meine feste IP", VPN access point [email protected]
Error: Failed to activate VPN access point [email protected], reason code -5257
für klingt das nach einer Fehlerhaften "Netzziel" Konfiguration.
Unter Zetzziele tauchte Intranet auf, in dem ist ein Zugangspunkt mit Namen [email protected]
in den Eistellungen steht dann:
Verbindungsname: [email protected]
VPN-Richtlinien: [email protected]
Netzverbindung: Internet
Proxyserver-Adresse: "nichts"
Proxy-Portnummer: "nichts"
Liegt es daran ?
Hier noch meine .pol vom E7
bin für jede Hilfe dankbar
bin hier schon seit drei Tagen am probieren, unteranderem mit hilfe der hier im Forum befindlichen Beispiel .cfg und .vpn . Leider ohne Erfolg.
Erlaube mir meine .cfg von der 7390 hier rein zu schreiben
Code:
vpncfg {
connections {
enabled = yes;
conn_type = conntype_user;
name = "[email protected]";
always_renew = no;
reject_not_encrypted = no;
dont_filter_netbios = yes;
localip = 0.0.0.0;
local_virtualip = 0.0.0.0;
remoteip = 0.0.0.0;
remote_virtualip = 192.168.54.201;
remoteid {
key_id = "[email protected]";
}
mode = phase1_mode_aggressive;
phase1ss = "all/all/all";
keytype = connkeytype_pre_shared;
key = "xxxxxxxxxxxxxxxxxxxxxxxxxx";
cert_do_server_auth = no;
use_nat_t = yes;
use_xauth = yes;
xauth {
valid = yes;
username = "[email protected]";
passwd = "xxxxxxxxxxx";
}
use_cfgmode = yes;
phase2localid {
ipnet {
ipaddr = 0.0.0.0;
mask = 0.0.0.0;
}
}
phase2remoteid {
ipaddr = 192.168.54.201;
}
phase2ss = "esp-all-all/ah-none/comp-all/no-pfs";
accesslist =
"permit ip 192.168.54.0 255.255.255.0 192.168.54.201 255.255.255.255",
"permit ip any 192.168.54.201 255.255.255.255";
}
ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
"udp 0.0.0.0:4500 0.0.0.0:4500";
}
// EOF
Im E7 steht unter VPN Protokoll immer abwechselnd:
Error: Received no respons from VPN gateway "meine feste IP", VPN access point [email protected]
Error: Failed to activate VPN access point [email protected], reason code -5257
für klingt das nach einer Fehlerhaften "Netzziel" Konfiguration.
Unter Zetzziele tauchte Intranet auf, in dem ist ein Zugangspunkt mit Namen [email protected]
in den Eistellungen steht dann:
Verbindungsname: [email protected]
VPN-Richtlinien: [email protected]
Netzverbindung: Internet
Proxyserver-Adresse: "nichts"
Proxy-Portnummer: "nichts"
Liegt es daran ?
Hier noch meine .pol vom E7
Code:
SECURITY_FILE_VERSION: 1
[INFO]
[email protected]
[POLICY]
sa [email protected]_1 = {
esp
encrypt_alg 12
max_encrypt_bits 256
auth_alg 3
identity_remote 192.168.178.0/24# Passend zu FB:phase2localid
src_specific
hard_lifetime_bytes 0
hard_lifetime_addtime 3600
hard_lifetime_usetime 3600
soft_lifetime_bytes 0
soft_lifetime_addtime 3600
soft_lifetime_usetime 3600
replay_win_len 0
pfs
}
remote 0.0.0.0 0.0.0.0 = { [email protected]_1(meine feste IP) }
inbound = { }
outbound = { }
[IKE]
ADDR: "meine feste IP" 255.255.255.255
IKE_VERSION: 1
MODE: Aggressive
REPLAY_STATUS: FALSE
USE_MODE_CFG: TRUE
IPSEC_EXPIRE: TRUE
USE_XAUTH: FALSE
USE_COMMIT: FALSE
ESP_UDP_PORT: 0
SEND_NOTIFICATION: TRUE
INITIAL_CONTACT: TRUE
USE_INTERNAL_ADDR: FALSE
DPD_HEARTBEAT: 90
NAT_KEEPALIVE: 60
REKEYING_THRESHOLD: 90
ID_TYPE: 3
FQDN: [email protected]
PRESHARED_KEYS:
FORMAT: STRING_FORMAT
KEY: 36 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
GROUP_DESCRIPTION_II: MODP_1024
USE_NAT_PROBE: FALSE
PROPOSALS: 1
ENC_ALG: AES256-CBC
AUTH_METHOD: PRE-SHARED
HASH_ALG: SHA1
GROUP_DESCRIPTION: MODP_1024
GROUP_TYPE: DEFAULT
LIFETIME_KBYTES: 0
LIFETIME_SECONDS: 3600
PRF: NONE
DNS_SERVER: "meine feste IP" habe auch schon DNS vom Provider probiert
// EOF
bin für jede Hilfe dankbar
Zuletzt bearbeitet: