Linux version 2.6.13.1-ohio () (gcc version 3.4.6) #1 Sat May 29 02:02:02 CEST 2010
memsize=32 MByte
flashsize=8 MByte
&_end=0x94264f84 PFN_ALIGN(&_end)=0x94265000 CPHYSADDR(PFN_ALIGN(&_end))=0x14265000 memsize=0x2000000
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
memory: 00265000 @ 14000000 (reserved)
memory: 01d9b000 @ 14265000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94268000-0x942a8020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fe8000-0x942a8020
zone=0 zone_size[j]=0x90112
realsize=8192
DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x9422422c
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x94227620.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x94227820.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x94227a20.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 255 irqaction->handler 0x94043850 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29952k/30316k available (1677k kernel code, 320k reserved, 403k data, 116k init, 0k highmem)
totalram_pages= 7499
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
Calling initcall 0x942173c8: helper_init+0x0/0x38()
Calling initcall 0x94217690: ksysfs_init+0x0/0x3c()
Calling initcall 0x942196e0: filelock_init+0x0/0x48()
Calling initcall 0x9421a000: init_script_binfmt+0x0/0xc()
Calling initcall 0x9421a00c: init_elf_binfmt+0x0/0xc()
Calling initcall 0x9421f26c: netlink_proto_init+0x0/0x2ac()
NET: Registered protocol family 16
Calling initcall 0x9421a8e0: kobject_uevent_init+0x0/0x50()
Calling initcall 0x9421ab68: tty_class_init+0x0/0x34()
Calling initcall 0x9420e2c8: frame_info_init+0x0/0xb4()
Can't analyze prologue code at 941a1a9c
Calling initcall 0x942193d0: init_bio+0x0/0x17c()
Calling initcall 0x9421b214: misc_init+0x0/0xc0()
Calling initcall 0x9421cf6c: genhd_device_init+0x0/0x44()
Calling initcall 0x9421d6a4: init_mtd+0x0/0x48()
Calling initcall 0x9421e2c4: input_init+0x0/0x1e0()
Calling initcall 0x9421e7fc: proto_init+0x0/0x48()
Calling initcall 0x9421e9c0: net_dev_init+0x0/0x1f0()
Calling initcall 0x9421f164: pktsched_init+0x0/0xc8()
Calling initcall 0x9421f238: tc_filter_init+0x0/0x34()
Calling initcall 0x94219634: init_pipe_fs+0x0/0x6c()
Calling initcall 0x9421a9f8: chr_dev_init+0x0/0xb4()
Calling initcall 0x942169e8: create_proc_profile+0x0/0x64()
Calling initcall 0x94216ac8: ioresources_init+0x0/0xc4()
Calling initcall 0x94216cd4: uid_cache_init+0x0/0x88()
Calling initcall 0x942170b8: param_sysfs_init+0x0/0x208()
Calling initcall 0x942172c0: init_posix_timers+0x0/0x108()
Calling initcall 0x94217400: init_posix_cpu_timers+0x0/0xd4()
Calling initcall 0x94217650: kallsyms_init+0x0/0x40()
Calling initcall 0x942189f0: init_per_zone_pages_min+0x0/0x64()
Calling initcall 0x94218e34: pdflush_init+0x0/0x28()
Calling initcall 0x94218e5c: cpucache_init+0x0/0x20()
Calling initcall 0x942191e4: kswapd_init+0x0/0x70()
Calling initcall 0x94219298: procswaps_init+0x0/0x40()
Calling initcall 0x942192d8: init_tmpfs+0x0/0x3c()
Calling initcall 0x942196a0: fasync_init+0x0/0x40()
Calling initcall 0x94219da4: aio_setup+0x0/0x8c()
Calling initcall 0x94219e30: inotify_setup+0x0/0xf4()
Calling initcall 0x94219f24: eventpoll_init+0x0/0xdc()
Calling initcall 0x9421a55c: init_devpts_fs+0x0/0x48()
Calling initcall 0x9421a5a4: init_squashfs_fs+0x0/0x90()
squashfs: version 3.3 (2007/10/31) Phillip Lougher
Calling initcall 0x9421a634: init_ramfs_fs+0x0/0xc()
Calling initcall 0x9421a64c: init_nls_utf8+0x0/0x30()
Calling initcall 0x9421a67c: ipc_init+0x0/0x30()
Calling initcall 0x9421a870: init_crypto+0x0/0x34()
Initializing Cryptographic API
Calling initcall 0x9421aaac: rand_initialize+0x0/0x3c()
Calling initcall 0x9421ab9c: tty_init+0x0/0x184()
Calling initcall 0x9421ad20: pty_init+0x0/0x4f4()
Calling initcall 0x9421b2d4: avm_net_trace_init+0x0/0x80()
avm_net_trace: Up and running.
Calling initcall 0x9421b354: avm_power_init+0x0/0x320()
[avm_power]Ohio250 detected -> overclocking possible
Calling initcall 0x9421b674: avm_sammel_init+0x0/0x158()
[avm] configured: watchdog eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: May 29 2010 01:59:34)
Calling initcall 0x9421c5bc: serial8250_init+0x0/0x10c()
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941e63b0 port->cons->flags = 0x7
[uart_add_one_port] success
Calling initcall 0x9421cfb0: noop_init+0x0/0xc()
io scheduler noop registered
Calling initcall 0x9421cfbc: cpphy_entry_probe+0x0/0x460()
[cpmac] Version: 1.124 - Revision 538:916 - Mi 9.12.2009 14:07:43
[avm_event_source_trigger]: not registered
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
Calling initcall 0x9421d4ac: net_olddevs_init+0x0/0x100()
Calling initcall 0x9421d614: tun_init+0x0/0x90()
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Calling initcall 0x9421d6ec: cmdline_parser_init+0x0/0xc()
Calling initcall 0x9421d6f8: init_mtdchar+0x0/0xc0()
Calling initcall 0x9421d7b8: init_mtdblock+0x0/0xc()
Calling initcall 0x9421d7c4: cfi_probe_init+0x0/0x24()
Calling initcall 0x9421d7e8: cfi_amdstd_init+0x0/0x30()
Calling initcall 0x9421d818: cfi_intelext_init+0x0/0x4c()
Calling initcall 0x9421d864: jedec_probe_init+0x0/0x24()
Calling initcall 0x9421d888: map_ram_init+0x0/0x24()
Calling initcall 0x9421d8ac: init_physmap+0x0/0x180()
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
RedBoot partition parsing not available
Calling initcall 0x9421da2c: platram_init+0x0/0x30()
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Calling initcall 0x9421da5c: init_ohio_flash+0x0/0x868()
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
flash_mask=0xffffff
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
[mtd]: jffs2_size = 6 * 64KByte (0x60000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x0/6659749
[init_ohio_flash] find hidden filesystem size=0x6c3600 offset=0xbca00
[mtd] configure jffs2 partition
[mtd] fs_size=0x710000 max=0x60000 is=0x60000 max jffs2_size value 6
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x800000
Creating 7 MTD partitions on "Ohio flash memory":
0x000bca00-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00720000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00010000-0x00720000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
partition_info[0]: name=filesystem offset=bca00 size=6c3600
partition_info[0]: 0xb00bca00: 0x73717368 0x91b
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[1]: 0xb0010000: 0xfeed1281 0xac9dc
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[2]: 0xb0000000: 0x40809000 0x40809800
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[3]: 0xb0780000: 0x40001 0xfeffffff
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[4]: 0xb07c0000: 0x40001 0xfeffffff
partition_info[5]: name=jffs2 offset=720000 size=60000
partition_info[5]: 0xb0720000: 0x20031985 0xc
partition_info[6]: name=Kernel without jffs2 offset=10000 size=710000
partition_info[6]: 0xb0010000: 0xfeed1281 0xac9dc
Calling initcall 0x9421e4a4: kcapi_init+0x0/0x9c()
Calling initcall 0x9421e5e8: capi_oslib_init+0x0/0x8()
Calling initcall 0x9421ecec: flow_cache_init+0x0/0x164()
Calling initcall 0x9421f22c: blackhole_module_init+0x0/0xc()
Calling initcall 0x9421ff98: inet_init+0x0/0x504()
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
Calling initcall 0x942229c0: init+0x0/0x8()
Calling initcall 0x942229c8: bictcp_register+0x0/0xc()
TCP bic registered
Calling initcall 0x94222a04: mcfw_init_module+0x0/0x2c()
mcfw: IGMPv3 fast forwarding
Calling initcall 0x94222b88: af_unix_init+0x0/0xa0()
NET: Registered protocol family 1
Calling initcall 0x94222c28: packet_init+0x0/0x80()
NET: Registered protocol family 17
Calling initcall 0x94222ca8: br_init+0x0/0x68()
Calling initcall 0x94222d64: atm_init+0x0/0xec()
NET: Registered protocol family 8
NET: Registered protocol family 20
Calling initcall 0x94222f08: br2684_init+0x0/0x54()
Calling initcall 0x94222f5c: vlan_proto_init+0x0/0xf4()
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
Calling initcall 0x9420d028: ohio_install_dummy_irq_functions+0x0/0x58()
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
Calling initcall 0x940017e4: ohio_late_init+0x0/0x3c()
[ohio_late_init]
Calling initcall 0x9420d164: ohio_clk_switch_init+0x0/0x60()
Calling initcall 0x9420d3e0: speedup_init+0x0/0x3c()
Calling initcall 0x9421aae8: seqgen_init+0x0/0x20()
Calling initcall 0x940d5ca0: avm_event_push_button_init+0x0/0x130()
[avm_new] push_button_gpio=8 value=1 enabled
Calling initcall 0x9421be30: tffs_init+0x0/0x224()
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
Calling initcall 0x9421cc80: early_uart_console_switch+0x0/0xb4()
Calling initcall 0x941335e8: net_random_reseed+0x0/0x34()
Calling initcall 0x942214b8: ip_auto_config+0x0/0x1130()
[prepare_namespace] new mount root /dev/mtdblock1
NumProbs = 7990 / 2 -> 15980
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 116k freed (7528 free)
[setup_irq]: irq 15 irqaction->handler 0x940e1f0c (serial8250_interrupt+0x0/0x13c )
AR7WDT: System Init UEberwachung 240 Sekunden
WARNING: TFFS Name Table update ! (current @F new @G)
[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=6250 key=button_key_3
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
[piglet]McSP: rFS: 8000 Hz rCLK:2048180 Hz
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc013e0cc)
[tiatm] Set StrictPriority=0
DSP binary filesize = 389146 bytes
[dsl_ur8] dsl serial number successfully set to "465249545a21426f7820466f6e20574c414e2037303032344645364432313238"
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[avm_power]Ohio250 detected -> overclocking possible
[avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####
[setup_irq]: irq 23 irqaction->handler 0xc0124208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 31 irqaction->handler 0xc0124238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
[tiatm] AvmInterface length: 44
[avm_power]#### boostVoltage: DSP Core voltage set to 1,65 V ####
Texas Instruments ATM driver: version:[4.08.01.00]
ubik2 driver (ubik2 - 0x10=0xc0098fd4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0086bfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c1644c
ubik2_init_interface: DSP-Link Version v3 8480
driver params overwritten io_addr=0x0 irq_num=0
[setup_irq]: irq 28 irqaction->handler 0xc0091af0 (soft_interrupt_handler+0x0/0x30 [ubik2] )
capicodec_init()
[capi_codec] support fax
[capi_codec] support Codecs
usbcore: registered new driver usbfs
usbcore: registered new driver hub
AHCI RevisionID = 0x02, RamSize = 16384, NumPorts= 1
[setup_irq]: irq 9 irqaction->handler 0xc0119490 (ahci_irq+0x0/0x880 [usbahcicore] )
ahci : new USB bus registered, assigned bus number 1
kdsldmod: Unknown symbol mcfw_multicast_forward_ethernet_adv
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
avm_net_trace: New net trace device 'WLAN' registered with minor 128.
[tiatm]: error getting DSL parametrization interface for read operation!
[avm_power] : ethernet port 0 status 2
[avm_power] : ethernet port 1 status 1
[avm_power] : ethernet port 2 status 1
[avm_power] : ethernet port 3 status 1
usb 1-1: new full speed USB device using ahci and address 2
[ohio_vlynq_init] device 0
[ohio_vlynq_startup_link]
[setup_irq]: irq 29 irqaction->handler 0x94005c4c (vlynq_interrupt+0x0/0x34 )
[setup_irq]: irq 79 irqaction->handler 0xc033039c (tiwlan_ddaVlynqIsr+0x0/0x28 [tiap] )
[tiatm] DSL in training!
SCSI subsystem initialized
Initializing USB Mass Storage driver...
USB Mass Storage device (14cd:8123) detected...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
[setup_irq]: irq 27 irqaction->handler 0x940f2c1c (cpmac_main_isr+0x0/0x78 )
[cpmac] [cpmac_main_ioctl] unknown ioctl 35142
device cpmac0 entered promiscuous mode
device eth0 entered promiscuous mode
device tiwlan0 entered promiscuous mode
lan: port 2(tiwlan0) entering learning state
lan: topology change detected, propagating
lan: port 2(tiwlan0) entering forwarding state
device wdsup0 entered promiscuous mode
lan: port 3(wdsup0) entering learning state
lan: topology change detected, propagating
lan: port 3(wdsup0) entering forwarding state
device wdsdw0 entered promiscuous mode
lan: port 4(wdsdw0) entering learning state
lan: topology change detected, propagating
lan: port 4(wdsdw0) entering forwarding state
device wdsdw1 entered promiscuous mode
lan: port 5(wdsdw1) entering learning state
lan: topology change detected, propagating
lan: port 5(wdsdw1) entering forwarding state
device wdsdw2 entered promiscuous mode
lan: port 6(wdsdw2) entering learning state
lan: topology change detected, propagating
lan: port 6(wdsdw2) entering forwarding state
device wdsdw3 entered promiscuous mode
lan: port 7(wdsdw3) entering learning state
lan: topology change detected, propagating
lan: port 7(wdsdw3) entering forwarding state
mcfw: group 0.0.0.0: query tiwlan:0 10sec
kdsldmod: Unknown symbol mcfw_multicast_forward_ethernet_adv
lan: port 1(eth0) entering learning state
lan: topology change detected, propagating
lan: port 1(eth0) entering forwarding state
Vendor: USB Mass Model: Storage Device Rev:
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 7698432 512-byte hdwr sectors (3942 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
[capi_oslib] capi_installed -1811532468
SCSI device sda: 7698432 512-byte hdwr sectors (3942 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
[capi_oslib] capi_installed -1811532468
AR7WDT: System Init UEberwachung abgeschlossen (196030 ms noch verfuegbar)
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=99 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=154 div=10 offset=974 NormP=2514 mW -> SumNormP=2514 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=83 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=4957 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=-2147483548 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=5897 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=5997 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=6097 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=300 act_rate=0 mul=141 div=10 offset=100 NormP=4330 mW -> SumNormP=10427 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10427 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=553648402 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=10944 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10944 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=64 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=14017 mW
SysRq : Changing Loglevel
Loglevel set to 4
[tiatm] DSL in training!
[tiatm] DSL in Sync
/proc/tffs: info request: success
