Ich habe den Apachen webserver auf meiner Box realisiert und möchte nun das ganze von außen erreichbar machen. wie geht das genau.
Bitte helft mir des is nämlich der allerletzte schritt.
Danke für eure tolle arbeit.
Unter http://www.ip-phone-forum.de/showthread.php?t=126383 steht
bei mir steht
einntragen??
Bitte helft mir des is nämlich der allerletzte schritt.
Danke für eure tolle arbeit.
Unter http://www.ip-phone-forum.de/showthread.php?t=126383 steht
Code:
...
brinterfaces {
name = "lan";
dhcp = no;
ipaddr = 192.168.178.1;
netmask = 255.255.255.0;
dstipaddr = 0.0.0.0;
interfaces = "eth0", "usbrndis", "eth1", "tiwlan0", "wdsup0",
"wdsdw0", "wdsdw1", "wdsdw2", "wdsdw3";
dhcpenabled = yes;
dhcpstart = 0.0.0.0;
dhcpend = 0.0.0.0;
} {
name = "lan:0";
dhcp = no;
ipaddr = 192.168.178.253;/*-->>254 in 253 ändern und portfreigaben auf die box sind wieder möglich
netmask = 255.255.255.0;
dstipaddr = 0.0.0.0;
dhcpenabled = yes;
dhcpstart = 0.0.0.0;
dhcpend = 0.0.0.0;
}
dslinterface {
...
bei mir steht
Code:
brinterfaces {
name = "lan";
dhcp = no;
ipaddr = 192.168.178.1;
netmask = 255.255.255.0;
dstipaddr = 0.0.0.0;
interfaces = "eth0", "ath0", "ath1", "wdsup0", "wdsup1",
"wdsup2", "wdsup3", "wdsup4", "wdsdw0",
"wdsdw1", "wdsdw2", "wdsdw3", "wdsdw4";
dhcpenabled = yes;
dhcpstart = 0.0.0.0;
dhcpend = 0.0.0.0;
no_dnsd_static = no;
is_guest = no;
is_hotspot = no;
} {
name = "lan:0";
dhcp = no;
ipaddr = 169.254.1.1;
netmask = 255.255.0.0;
dstipaddr = 0.0.0.0;
dhcpenabled = yes;
dhcpstart = 0.0.0.0;
dhcpend = 0.0.0.0;
no_dnsd_static = no;
is_guest = no;
is_hotspot = no;
} {
Code:
ipaddr = 169.254.1.1;
einntragen??
Zuletzt bearbeitet: