(Probleme gelöst) Fli4L 2.1.9 und Asterisk Fehlermeldungen

[ploieel]

* gibt sozusagen keinerlei Fehlermeldungen aus. ist schon seltsam? Oder nicht?? :shock:

 

[Netview]

Es gibt da ein Problem mit der Namensauflösung im *, wenn dieser zu früh gestartet wird!
Ändert sich etwas zu 1) und 2) wenn du einen Restart durchführst 'restart now'???

 

[ploieel]

Der Prozessor ist auf 100 %, Änderungen sind nicht zu erkennen. Die 100 % waren aber auch schon vorher da.

 

[ploieel]

Die SIP-Registrierung sollte doch eines der kleinsten Übel sein,; was wird dann erst mit dem ISDN? Ich glaube fast, das Handtuch schmeißen ist das Beste, vorerst jedenfalls. Jedenfalls habe ich vermutet, dass FLI4L und Asterisk so von Anfang an einigermaßen funktionieren würden....

Die Hilfsbereitschaft hier auf dem Board ist jedenfalls beispielhaft; vielleicht kriege ich die Sache doch noch Ingange!

Viele Grüße und Danke!!

 

[Netview]

Der Prozessor ist auf 100 %, Änderungen sind nicht zu erkennen. Die 100 % waren aber auch schon vorher da.

Durch asterisk verursacht???
Auf welcher Plattform läuft er dieser den jetzt: AMD K6-2/366, PII-266, Pentium 200MMX???
Laut J. Roellgen ist asterisk nur Lauffähig auf der Intel-Plattform ab einem Pentium II aufwärts könnte dies der Grund sein???

 

[ploieel]

Pentium II /266, mittlerweile heruntergerüstet auf PII/233 / wegen Stromsparen einfach anderen Prozessor draufgesteckt.
Slot 1, latürnich, geht ja gar nicht anders.

 

[Netview]

Okay - dann wünsch ich dir mal ne gute Nacht!
Morgen kannst du dir mal die startup-Fehlermeldungen ansehen und ggfs. hier posten!
Erzeugt werden diese mit 'asterisk -gccvvvr' - falls dir etwas merkwürdiges auffällt dann hier posten!
Allerdings kann es sehr gut sein, dass die hfc-Treiber nicht richtig unter 2.1.9 funktionieren, da sie noch niemand getestet hat! Im Zweifelsfall mal Kontakt mit Jürgen Roellgen aufnehmen!

 

[ploieel]

Danke bis hierher; morgen sehen wir weiter.

 

[ploieel]

Na gut, ich habe mal weiter getestet, hier das Ergebnis:

fli4l 2.1.9 # asterisk -gccvvvr
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Asterisk CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a, Copyright (C) 1999-.
Written by Mark Spencer <[email protected]>
=========================================================================
Connected to Asterisk CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a current)
-- Remote UNIX connection
Mar 15 18:01:03 NOTICE[11275]: chan_sip.c:3922 sip_reg_timeout: Registration fon
Mar 15 18:01:03 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authe'
Mar 15 18:01:23 NOTICE[11275]: chan_sip.c:3922 sip_reg_timeout: Registration fon
Mar 15 18:01:23 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authe'
Mar 15 18:01:43 NOTICE[11275]: chan_sip.c:3922 sip_reg_timeout: Registration fon
Mar 15 18:01:43 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authe'
fli4l*CLI>

Graue Haare sind das Mindeste, was ich hier noch kriege.
Vielleicht ist ja der Fehler etwas ganz profanes? Ich habe bisher die .conf-Files, die im Fli4l-Ordner liegen, mit dem Texteditor von Windows bearbeitet, nicht mit Wordpad. Daran kanns doch sicherlich nicht liegen, oder vielleicht doch?

 

[Netview]

starte mal mit 'asterisk -vvvvvgc' und poste das Ergebnis!

 

[ploieel]

Guten Abend erstmal, und hier das:
fli4l 2.1.9 # asterisk -vvvvvgc
Asterisk already running on /var/run/asterisk.ctl. Use 'asterisk -r' to connect.
fli4l 2.1.9 #

 

[ploieel]

Habe Asterisk gestoppt und dann asterisk -vvvvvgc, das Ergerbnis ist aber ziemlich umfangreich:

 == Registered application 'Flash'
 [app_getcpeid.so] => (Get ADSI CPE ID)
  == Registered application 'GetCPEID'
 [app_groupcount.so] => (Group Management Routines)
  == Registered application 'GetGroupCount'
  == Registered application 'SetGroup'
  == Registered application 'CheckGroup'
 [app_hasnewvoicemail.so] => (Indicator for whether a voice mailbox has messages in a given folder.
  == Registered application 'HasVoicemail'
  == Registered application 'HasNewVoicemail'
 [app_ices.so] => (Encode and Stream via icecast and ices)
  == Registered application 'ICES'
 [app_image.so] => (Image Transmission Application)
  == Registered application 'SendImage'
 [skipping app_intercom.so]
 [app_lookupblacklist.so] => (Look up Caller*ID name/number from blacklist database)
  == Registered application 'LookupBlacklist'
 [app_lookupcidname.so] => (Look up CallerID Name from local database)
  == Registered application 'LookupCIDName'
 [app_macro.so] => (Extension Macros)
  == Registered application 'Macro'
 [app_meetme.so] => (MeetMe conference bridge)
  == Registered application 'MeetMeAdmin'
  == Registered application 'MeetMeCount'
  == Registered application 'MeetMe'
 [app_milliwatt.so] => (Digital Milliwatt (mu-law) Test Application)
  == Registered application 'Milliwatt'
 [app_mp3.so] => (Silly MP3 Application)
  == Registered application 'MP3Player'
 [app_nbscat.so] => (Silly NBS Stream Application)
  == Registered application 'NBScat'
 [app_parkandannounce.so] => (Call Parking and Announce Application)
  == Registered application 'ParkAndAnnounce'
 [app_pickup.so] => (PickUp/PickDown/Steal)
  == Registered application 'PickDown'
  == Registered application 'Steal'
  == Registered application 'PickUp'
 [app_playback.so] => (Trivial Playback Application)
  == Registered application 'Playback'
 [app_privacy.so] => (Require phone number to be entered, if no CallerID sent)
  == Registered application 'PrivacyManager'
 [app_qcall.so] => (Call from Queue)
 [app_queue.so] => (True Call Queueing)
  == Registered application 'Queue'
  == Manager registered action Queues
  == Manager registered action QueueStatus
  == Manager registered action QueueAdd
  == Manager registered action QueueRemove
  == Registered application 'AddQueueMember'
  == Registered application 'RemoveQueueMember'
  == Parsing '/etc/asterisk/queues.conf': Found
 [app_random.so] => (Random goto)
  == Registered application 'Random'
 [app_read.so] => (Read Variable Application)
  == Registered application 'Read'
 [app_record.so] => (Trivial Record Application)
  == Registered application 'Record'
 [app_sayunixtime.so] => (Say time)
  == Registered application 'SayUnixTime'
  == Registered application 'DateTime'
 [app_senddtmf.so] => (Send DTMF digits Application)
  == Registered application 'SendDTMF'
 [app_sendtext.so] => (Send Text Applications)
  == Registered application 'SendText'
 [app_setcallerid.so] => (Set CallerID Application)
  == Registered application 'SetCallerPres'
  == Registered application 'SetCallerID'
 [app_setcdruserfield.so] => (CDR user field apps)
  == Registered application 'SetCDRUserField'
  == Registered application 'AppendCDRUserField'
  == Manager registered action SetCDRUserField
 [app_setcidname.so] => (Set CallerID Name)
  == Registered application 'SetCIDName'
 [app_setcidnum.so] => (Set CallerID Number)
  == Registered application 'SetCIDNum'
 [app_sms.so] => (SMS/PSTN handler)
  == Registered application 'SMS'
 [app_softhangup.so] => (Hangs up the requested channel)
  == Registered application 'SoftHangup'
 [app_striplsd.so] => (Strip trailing digits)
  == Registered application 'StripLSD'
 [app_substring.so] => ((Deprecated) Save substring digits in a given variable)
  == Registered application 'SubString'
 [app_system.so] => (Generic System() application)
  == Registered application 'System'
 [app_talkdetect.so] => (Playback with Talk Detection)
  == Registered application 'BackgroundDetect'
 [app_transfer.so] => (Transfer)
  == Registered application 'Transfer'
 [app_txtcidname.so] => (TXTCIDName)
  == Registered application 'TXTCIDName'
  == Parsing '/etc/asterisk/enum.conf': Found
 [app_url.so] => (Send URL Applications)
  == Registered application 'SendURL'
 [app_userevent.so] => (Custom User Event Application)
  == Registered application 'UserEvent'
 [app_verbose.so] => (Send verbose output)
  == Registered application 'Verbose'
 [app_voicemail.so] => (Comedian Mail (Voicemail System))
  == Registered application 'VoiceMail'
  == Registered application 'VoiceMail2'
  == Registered application 'VoiceMailMain'
  == Registered application 'VoiceMailMain2'
  == Registered application 'MailboxExists'
  == Parsing '/etc/asterisk/voicemail.conf': Found
 [app_waitforring.so] => (Waits until first ring after time)
  == Registered application 'WaitForRing'
 [app_zapateller.so] => (Block Telemarketers with Special Information Tone)
  == Registered application 'Zapateller'
 [app_zapbarge.so] => (Barge in on Zap channel application)
  == Registered application 'ZapBarge'
 [app_zapras.so] => (Zap RAS Application)
  == Registered application 'ZapRAS'
 [app_zapscan.so] => (Scan Zap channels application)
  == Registered application 'ZapScan'
 [cdr_csv.so] => (Comma Separated Values CDR Backend)
 [cdr_manager.so] => (Asterisk Call Manager CDR Backend)
  == Parsing '/etc/asterisk/cdr_manager.conf': Found
 [chan_agent.so] => (Agent Proxy Channel)
  == Registered channel type 'Agent' (Call Agent Proxy Channel)
  == Registered application 'AgentLogin'
  == Registered application 'AgentCallbackLogin'
  == Registered application 'AgentMonitorOutgoing'
  == Parsing '/etc/asterisk/agents.conf': Found
 [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
  == Manager registered action IAXpeers
  == Parsing '/etc/asterisk/iax.conf': Found
  == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
  == Using TOS bits 16
  == IAX Ready and Listening on 0.0.0.0 port 4569
  == Loaded firmware 'iaxy.bin'
  == Parsing '/etc/asterisk/iaxprov.conf': Found
    -- Loaded provisioning template 'default'
 [chan_local.so] => (Local Proxy Channel)
  == Registered channel type 'Local' (Local Proxy Channel Driver)
 [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
  == Parsing '/etc/asterisk/mgcp.conf': Found
  == MGCP Listening on 0.0.0.0:2727
  == Using TOS bits 0
  == Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP))
 [skipping chan_modem.so]
 [skipping chan_modem_aopen.so]
 [skipping chan_modem_bestdata.so]
 [skipping chan_modem_i4l.so]
 [skipping chan_oss.so]
 [chan_phone.so] => (Linux Telephony API Support)
  == Parsing '/etc/asterisk/phone.conf': Found
  == Registered channel type 'Phone' (Standard Linux Telephony API Driver)
 [chan_sip.so] => (Session Initiation Protocol (SIP))
  == Parsing '/etc/asterisk/sip.conf': Found
  == SIP Listening on 0.0.0.0:5060
  == Using TOS bits 24
  == Registered channel type 'SIP' (Session Initiation Protocol (SIP))
  == Registered application 'SIPDtmfMode'
 [skipping chan_skinny.so]
 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
    -- Registered channel 1, PRI Signalling signalling
    -- Registered channel 2, PRI Signalling signalling
    -- Automatically generated pseudo channel
  == Starting D-Channel on span 1
  == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
  == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)
  == Registered application 'CallingPres'
  == Manager registered action ZapTransfer
  == Manager registered action ZapHangup
  == Manager registered action ZapDialOffhook
  == Manager registered action ZapDNDon
  == Manager registered action ZapDNDoff
  == Manager registered action ZapShowChannels
 [codec_adpcm.so] => (Adaptive Differential PCM Coder/Decoder)
  == Registered translator 'adpcmtolin' from format ADPCM to SLINR, cost 7
  == Registered translator 'lintoadpcm' from format SLINR to ADPCM, cost 6
 [codec_alaw.so] => (A-law Coder/Decoder)
  == Registered translator 'alawtolin' from format ALAW to SLINR, cost 1
  == Registered translator 'lintoalaw' from format SLINR to ALAW, cost 1
 [codec_a_mu.so] => (A-law and Mulaw direct Coder/Decoder)
  == Registered translator 'alawtoulaw' from format ALAW to ULAW, cost 1
  == Registered translator 'ulawtoalaw' from format ULAW to ALAW, cost 1
 [codec_g726.so] => (ITU G.726-32kbps G726 Transcoder)
  == Registered translator 'g726tolin' from format G726 to SLINR, cost 57
Mar 15 21:19:51 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authenticate on REGISTER to '<sip:[email protected]'
  == Registered translator 'lintog726' from format SLINR to G726, cost 79
 [codec_gsm.so] => (GSM/PCM16 (signed linear) Codec Translator)
  == Registered translator 'gsmtolin' from format GSM to SLINR, cost 8
  == Registered translator 'lintogsm' from format SLINR to GSM, cost 84
 [codec_ilbc.so] => (iLBC/PCM16 (signed linear) Codec Translator)
  == Registered translator 'ilbctolin' from format ILBC to SLINR, cost 65
  == Registered translator 'lintoilbc' from format SLINR to ILBC, cost 441
 [codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder)
  == Registered translator 'lpc10tolin' from format LPC10 to SLINR, cost 64
  == Registered translator 'lintolpc10' from format SLINR to LPC10, cost 116
 [codec_ulaw.so] => (Mu-law Coder/Decoder)
  == Registered translator 'ulawtolin' from format ULAW to SLINR, cost 1
  == Registered translator 'lintoulaw' from format SLINR to ULAW, cost 1
 [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data)
  == Registered file format g726-40, extension(s) g726-40
  == Registered file format g726-32, extension(s) g726-32
  == Registered file format g726-24, extension(s) g726-24
  == Registered file format g726-16, extension(s) g726-16
 [format_g729.so] => (Raw G729 data)
  == Registered file format g729, extension(s) g729
 [format_gsm.so] => (Raw GSM data)
  == Registered file format gsm, extension(s) gsm
 [format_h263.so] => (Raw h263 data)
  == Registered file format h263, extension(s) h263
 [format_ilbc.so] => (Raw iLBC data)
  == Registered file format iLBC, extension(s) ilbc
 [format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format)
  == Registered format 'jpg' (JPEG (Joint Picture Experts Group))
 [format_pcm.so] => (Raw uLaw 8khz Audio support (PCM))
  == Registered file format pcm, extension(s) pcm|ulaw|ul|mu
 [format_pcm_alaw.so] => (Raw aLaw 8khz PCM Audio support)
  == Registered file format alaw, extension(s) alaw|al
 [format_vox.so] => (Dialogic VOX (ADPCM) File Format)
  == Registered file format vox, extension(s) vox
 [format_wav.so] => (Microsoft WAV format (8000hz Signed Linear))
  == Registered file format wav, extension(s) wav
 [format_wav_gsm.so] => (Microsoft WAV format (Proprietary GSM))
  == Registered file format wav49, extension(s) WAV|wav49
 [pbx_config.so] => (Text Extension Configuration)
  == Parsing '/etc/asterisk/extensions.conf': Found
    -- Setting global variable 'IAXINFO' to 'guest'
    -- Registered extension context 'internal'
    -- Added extension '1234' priority 1 to internal
    -- Added extension '1234' priority 2 to internal
    -- Added extension '1234' priority 3 to internal
    -- Added extension '1234' priority 102 to internal
    -- Added extension '1234' priority 103 to internal
    -- Registered extension context 'external-ISDN'
    -- Added extension '_0.' priority 1 to external-ISDN
    -- Added extension '_0.' priority 2 to external-ISDN
    -- Registered extension context 'external-SIP'
    -- Added extension '_8.' priority 1 to external-SIP
    -- Added extension '_8.' priority 2 to external-SIP
    -- Added extension '_8.' priority 3 to external-SIP
    -- Added extension '_8.' priority 4 to external-SIP
    -- Registered extension context 'vmailbox'
    -- Added extension '8000' priority 1 to vmailbox
    -- Registered extension context 'default'
    -- Including context 'vmailbox' in context 'default'
    -- Including context 'internal' in context 'default'
    -- Including context 'external-ISDN' in context 'default'
    -- Including context 'external-SIP' in context 'default'
 [pbx_spool.so] => (Outgoing Spool Support)
 [pbx_wilcalu.so] => (Wil Cal U (Auto Dialer))
  == Parsing '/etc/asterisk/enum.conf': Found
  == Parsing '/etc/asterisk/logger.conf': Found
Asterisk Event Logger restarted
Asterisk Ready.
*CLI> Mar 15 21:20:11 NOTICE[11275]: chan_sip.c:3922 sip_reg_timeout: Registration for '[email protected]' timed out, tryingn
Mar 15 21:20:11 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authenticate on REGISTER to '<sip:[email protected]'

 

[ploieel]

Ich verabschiede mich mal für heute. Mir brummt der Schädel.
Gute Nacht. :grab:

 

[Netview]

Hier muss ein Syntaxfehler sein (register => in der sip.conf?):

Mar 15 21:19:51 NOTICE[11275]: chan_sip.c:6575 handle_response: Failed to authenticate on REGISTER to '<sip:7778667@sipgate.d'

Vielleicht verursacht durch den Texteditor statt wordpad!

 

[ploieel]

Richtig, der Hinweis war gut!
Habe die sip.conf mit wordpad editiert (war aber kein Unterschied zum Editor).
Mein Fehler war folgender:
ich hatte das "secret" und das Passwort unter "register => 7778667: <Passwort> ---- bla" in Kleinbuchstaben geschrieben, das habe ich in Großbuchstaben geändert und das registrieren hat funktioniert, natürlich außer der Ziffer in der Mitte. Also statt xxx0xx XXX0XX.

Dafür ist unter "asterisk -vvvvvgc" eine neue Fehlermeldung aufgetaucht:

Mar 16 12:00:20 WARNING[1024]: chan_skinny.c:2584 reload_config: Unable to get d

Und der Prozessor geht nach ein paar Minuten immer noch auf 100%.
Ich hoffe weiterhin auf Hilfe.

 

[Netview]

post mal deine modules.conf

 

[ploieel]

hier meine modules.conf:

;
; Asterisk configuration file
;
; Module Loader configuration file
;

[modules]
autoload=yes
noload => pbx_gtkconsole.so
noload => pbx_kdeconsole.so
noload => chan_modem_i4l.so
noload => chan_modem_bestdata.so
noload => chan_modem_aopen.so
noload => chan_modem.so
noload => app_intercom.so
load => chan_capi.so
load => res_musiconhold.so
noload => chan_elsa.so
noload => chan_oss.so
[global]
chan_capi.so=yes

 

[Netview]

Du hast nur eine hfc drinnen?

dann:
noload => chan_capi.so
[global]
chan_capi.so=no

und danach asterisk restarten!

 

[ploieel]

Nein, ich habe extern eine Teledat150 (baugleich Fritz!PCI) und intern die HFC
(Arowana 128K bps PCI). Soll ich das trotzdem mal so ändern?

 

[ploieel]

Neuer Fehler: oder immer noch der alte?

Mar 16 18:18:22 WARNING[1024]: chan_skinny.c:2584 reload_config: Unable to get d
== Registered channel type 'Skinny' (Skinny Client Control Protocol (Skinny))

Ansonsten scheint das Teil zu laufen.
Jetzt noch ein paar Testanrufe, gibt es da möglichst kostenlose Nummern?

NUR wenn ich putty unsanft beende (und vorher nicht die Session ordnungsgemäß schließe), geht der Proz. auf 100% ! Ich Esel, das hätte ich doch wissen müssen!! :argh: