7340 new avm firmware 99.05.05 available/not used by freetz

[Michael999]

Currently Freetz uses avm firmware version 99.04.90 for the 7340. Could/will Freetz be made compatible with the new 7340 firmware (because right now it obviously isn't)?

 

[olistudent]

Thank you for the reminder. I don't get news for the international firmwares.

Regards
Oliver

 

[olistudent]

Please give it a try. But don't forget to get a recover image before it has come too late.

Regards
Oliver

$ svn log -r 7755:7759
------------------------------------------------------------------------
r7755 | oliver | 2011-10-08 18:39:59 +0200 (Sa, 08. Okt 2011) | 1 Zeile

* 7340: Prepare for version bump, delete old patches
------------------------------------------------------------------------
r7756 | oliver | 2011-10-08 18:40:01 +0200 (Sa, 08. Okt 2011) | 1 Zeile

* 7340: Prepare for version bump, delete old patches
------------------------------------------------------------------------
r7757 | oliver | 2011-10-08 18:54:47 +0200 (Sa, 08. Okt 2011) | 1 Zeile

* 7340: Bump version to 05.05 (step 2)
------------------------------------------------------------------------
r7758 | oliver | 2011-10-08 18:58:35 +0200 (Sa, 08. Okt 2011) | 2 Zeilen

* 7340: Bump version to 05.05 (final step)

------------------------------------------------------------------------
r7759 | oliver | 2011-10-08 18:58:36 +0200 (Sa, 08. Okt 2011) | 2 Zeilen

* 7340: Bump version to 05.05 (final step)

------------------------------------------------------------------------

 

[Michael999]

I had to recover the box. My Freetz setup works fine as long as I don't use "replace kernel". If I do, the power/DSL led just keeps blinking indefinitely and the AVM web-interface is unreachable.

Thank you, olistudent.

 

[frater]

The 7270 has an update as well.....
I needed to recover a Fritzbox recently and lost all the settings because the "upgrade" to Freetz was seen as a downgrade...

 

[olistudent]

Okay. Then I will disable replace kernel for 7340 05.05.

Regards
Oliver

 

[Michael999]

This is perhaps a little bit off-topic, but these things only happened after I changed from 04.90 to 05.05. The only things not working for me now are 1) starting subversion and 2) logging in with vsftpd/dropbear sftp. Logging in via shell gets me:

-sh: /etc/init.d/rc.conf: line 4: can't create /var/env: Permission denied
rm: can't remove '/var/htmltext.db': Permission denied
ln: /var/htmltext.db: File exists
rm: can't remove '/var/TZ': Permission denied
ln: /var/TZ: File exists
test@fritz:/$ l
drwxrwxrwx   15 root     root           207 Oct 11 21:23 .
drwxrwxrwx   15 root     root           207 Oct 11 21:23 ..
drwxr-xr-x    2 root     root          1268 Oct 11 21:23 bin
drwxr-xr-x    2 root     root             3 Sep 19 16:15 data
drwxr-xr-x    8 root     root          3340 Jan  1  1970 dev
drwxr-xr-x   57 root     root          2015 Oct 11 21:23 etc
lrwxrwxrwx    1 root     root            12 Oct 11 21:22 home -> var/mod/home
drwxr-xr-x    4 root     root          5118 Oct 11 21:23 lib
drwxr-xr-x    2 root     root             3 Sep 19 16:15 mnt
lrwxrwxrwx    1 root     root             7 Oct 11 21:22 mod -> var/mod
lrwxrwxrwx    1 root     root            19 Oct 11 21:22 nohup.out -> ./var/tmp/nohup.out
drwxr-xr-x    2 root     root             3 Oct 11 21:22 opt
dr-xr-xr-x  108 root     root             0 Jan  1  1970 proc
drwxr-xr-x    2 root     root             3 Sep 19 16:15 root
drwxr-xr-x    2 root     root           907 Oct 11 21:23 sbin
drwxr-xr-x   11 root     root             0 Jan  1  1970 sys
lrwxrwxrwx    1 root     root             7 Oct 11 21:22 tmp -> var/tmp
drwxr-xr-x   13 root     root           159 Oct 11 21:23 usr
drwxr-xr-x   17 root     root          1180 Oct 11 21:59 var
-rw-r--r--    1 root     root         37376 Oct 11 21:23 var.tar
test@fritz:/$ mkdir test
mkdir: can't create directory 'test': Read-only file system

and I get thrown in / instead of the home directory.

Homedir:

root@fritz:/var/mod/root# ls -ld /var/media/ftp/uStor06/ftp/test
drwxrwxrwx    2 test     test          4096 Oct 11 22:44 /var/media/ftp/uStor06/ftp/test

It's not a big thing though, I can always go back to 04.90 if I really want to get those things working again.

Subversion not starting:

start-stop-daemon: can't execute '/usr/bin/svnserve': Permission denied
Starting subversion ... failed.

root@fritz:/var/mod/root# l /usr/bin/svnserve
lrwxrwxrwx    1 root     root            30 Oct 11 21:23 /usr/bin/svnserve -> /mod/external/usr/bin/svnserve
root@fritz:/var/mod/root# l /mod/external/usr/bin/svnserve
-rwxr-xr-x    1 root     root       2324412 Oct 10 17:04 /mod/external/usr/bin/svnserve

 

[olistudent]

This doesn't have to do anything with the new firmware. The user test does work like root for you with 04.90? I don't think so!?

Regards
Oliver

 

[Michael999]

It's just that a few weeks ago I could log in fine, but it's clearly something else then. Thanks for clearing that up.

 

[olistudent]

I would wonder if these messages

-sh: /etc/init.d/rc.conf: line 4: can't create /var/env: Permission denied
rm: can't remove '/var/htmltext.db': Permission denied
ln: /var/htmltext.db: File exists
rm: can't remove '/var/TZ': Permission denied
ln: /var/TZ: File exists

do not always appear when login with a user different from root.

Regards
Oliver

 

[Michael999]

You're right, they do.

 

[Melchior]

syslog fritzbox 7340

Okay. Then I will disable replace kernel for 7340 05.05.

Regards
Oliver

I have flashed the fritzbox 7340 with Freetz trunk 7793 with replace kernel on.

First I disconnect the dsl cable. Second I connect with the fritzbox and start logging with syslog.

Third I connect the dsl cable again and see the kernel panicking.

I want to be able to choose 'replace kernel', so I can add 'pptp' to Freetz.

Syslog:

<13>Jan 1 01:02:16 kernel: klogd started: BusyBox v1.19.2 (2011-10-10 14:36:42 CEST)
192.168.178.1 14/10 15:14:33.516
<12>Jan 1 01:04:11 kernel: VDSL AP and VDSL PHY clocks are enabled
192.168.178.1 14/10 15:16:28.134
<12>Jan 1 01:04:11 kernel: Slave Mem Alloc: Req size 32 Ptr2Block 0x191f00a0
192.168.178.1 14/10 15:16:28.136
<12>Jan 1 01:04:11 kernel: Slave Mem Alloc: Req size 96 Ptr2Block 0x191f00c0
192.168.178.1 14/10 15:16:28.137
<12>Jan 1 01:04:11 kernel: Slave Mem Alloc: Req size 128 Ptr2Block 0x191f0120
192.168.178.1 14/10 15:16:28.138
<12>Jan 1 01:04:11 kernel: Slave Mem Alloc: Req size 192 Ptr2Block 0x191f01a0
192.168.178.1 14/10 15:16:28.139
<12>Jan 1 01:04:11 kernel: Slave Mem Alloc: Req size 256 Ptr2Block 0x191f0260
192.168.178.1 14/10 15:16:28.139
<12>Jan 1 01:04:11 kernel: Calling vdslAtmCellHeaderRAMReset()....
192.168.178.1 14/10 15:16:28.154
<12>Jan 1 01:04:11 kernel: ATM Driver Initialized SUCCESSFULLY...
192.168.178.1 14/10 15:16:28.158
<15>Jan 1 01:04:27 kernel: vcc_release(0,0) done.<7>vcc_release(0,0) done.<7>vcc_release(0,0) done.<7><7>vcc_connect(0,34) done.<7><6>kdsld_token_thread: start
192.168.178.1 14/10 15:16:44.228
<14>Jan 1 01:04:27 kernel: sch_llq: Sep 8 2011 15:32:44
192.168.178.1 14/10 15:16:44.260
<14>Jan 1 01:04:28 kernel: /proc/tffs: info request: success
192.168.178.1 14/10 15:16:44.855
<13>Jan 1 01:04:28 ONLINECHANGED[4035]: [online] approved
192.168.178.1 14/10 15:16:45.275
<13>Jan 1 01:04:28 ONLINECHANGED[4035]: [online] executing /etc/onlinechanged/00-get_ip
192.168.178.1 14/10 15:16:45.290
<13>Jan 1 01:04:28 ONLINECHANGED[4035]: [online] executing /etc/onlinechanged/chrony
192.168.178.1 14/10 15:16:45.325
<13>Jan 1 01:04:28 ONLINECHANGED[4035]: [online] * modprobe: module rtc_dev not found in modules.dep
192.168.178.1 14/10 15:16:45.557
<13>Jan 1 01:04:28 ONLINECHANGED[4035]: [online] * modprobe: module rtc_lib not found in modules.dep
192.168.178.1 14/10 15:16:45.652
<13>Jan 1 01:04:29 ONLINECHANGED[4035]: [online] * rm: can't remove '/var/flash/chrony.drift': No such file or directory
192.168.178.1 14/10 15:16:45.857
<13>Jan 1 01:04:29 ONLINECHANGED[4035]: [online] * rm: can't remove '/var/flash/chrony.rtc': No such file or directory
192.168.178.1 14/10 15:16:45.858
<14>Oct 14 15:16:36 chronyd[4077]: chronyd version 1.25-pre1 starting
192.168.178.1 14/10 15:16:46.267
<11>Oct 14 15:16:36 telefon[1600]: set initial telefon time from linux time to 15:16:36 14.10 2011!
192.168.178.1 14/10 15:16:46.562
<14>Oct 14 15:16:36 chronyd[4077]: Initial txc.tick=10000 txc.freq=0 (0.00000000) txc.offset=0 => hz=100 shift_hz=7
192.168.178.1 14/10 15:16:46.886
<14>Oct 14 15:16:36 chronyd[4077]: set_config_hz=0 hz=100 shift_hz=7 basic_freq_scale=1.28000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
192.168.178.1 14/10 15:16:46.888
<14>Oct 14 15:16:36 chronyd[4077]: Linux kernel major=2 minor=6 patch=28
192.168.178.1 14/10 15:16:46.890
<14>Oct 14 15:16:36 chronyd[4077]: calculated_freq_scale=1.00000000 freq_scale=1.00000000
192.168.178.1 14/10 15:16:46.892
<9>Oct 14 15:16:36 kernel: CPU 0 Unable to handle kernel paging request at virtual address fffffff4, epc == c1a38e78, ra == 8008d3a4
192.168.178.1 14/10 15:16:46.893
<12>Oct 14 15:16:36 kernel: Oops[#1]:
192.168.178.1 14/10 15:16:46.895
<12>Oct 14 15:16:36 kernel: Cpu 0
192.168.178.1 14/10 15:16:46.896
<12>Oct 14 15:16:36 kernel: $ 0 : 00000000 7fba3a2c c1a38e60 00000001
192.168.178.1 14/10 15:16:46.898
<12>Oct 14 15:16:36 kernel: $ 4 : 87a44b84 86aece60 87976154 86aece60
192.168.178.1 14/10 15:16:46.899
<12>Oct 14 15:16:36 kernel: $ 8 : 00000030 00020f54 8008864c fffffff8
192.168.178.1 14/10 15:16:46.901
<12>Oct 14 15:16:36 kernel: $12 : 00000001 00440b00 00000260 004280bc
192.168.178.1 14/10 15:16:46.903
<12>Oct 14 15:16:36 kernel: $16 : 00000004 fffffeb0 87976154 00000000
192.168.178.1 14/10 15:16:46.904
<12>Oct 14 15:16:36 kernel: $20 : 00000000 00000000 00000000 7fba498c
192.168.178.1 14/10 15:16:46.908
<12>Oct 14 15:16:36 kernel: $24 : 000001b0 00000000
192.168.178.1 14/10 15:16:46.909
<12>Oct 14 15:16:36 kernel: $28 : 85414000 85417d98 0042be84 8008d3a4
192.168.178.1 14/10 15:16:46.911
<12>Oct 14 15:16:36 kernel: Code: afb00014 8c9000f0 2611feac <8e240144> 2610003c 24020001 c2060000 00c21825 e2030000
192.168.178.1 14/10 15:16:46.913
<8>Oct 14 15:16:36 kernel: Fatal exception: panic in 5 seconds
192.168.178.1 14/10 15:16:46.914
<13>Oct 14 15:16:37 ONLINECHANGED[4035]: [online] executing /etc/onlinechanged/send_crashreport
192.168.178.1 14/10 15:16:47.547
<13>Oct 14 15:16:38 ONLINECHANGED[4035]: [online] executing /etc/onlinechanged/webdav_net
192.168.178.1 14/10 15:16:48.535
<13>Oct 14 15:16:39 ONLINECHANGED[4035]: [online] finished
192.168.178.1 14/10 15:16:49.967
<12>Oct 14 15:16:41 kernel: Call Trace:
192.168.178.1 14/10 15:16:51.849
<12>Oct 14 15:16:41 kernel: [<802c7b04>] dump_stack+0x8/0x34
192.168.178.1 14/10 15:16:51.850
<12>Oct 14 15:16:41 kernel: [<802c7b6c>] panic+0x3c/0x1e8
192.168.178.1 14/10 15:16:51.851
<12>Oct 14 15:16:41 kernel: [<8001b668>] die+0xd4/0xdc
192.168.178.1 14/10 15:16:51.852
<12>Oct 14 15:16:41 kernel: [<8001f59c>] do_page_fault+0x2dc/0x4e0
192.168.178.1 14/10 15:16:51.853
<12>Oct 14 15:16:41 kernel: [<80015500>] ret_from_exception+0x0/0xc
192.168.178.1 14/10 15:16:51.854
<12>Oct 14 15:16:41 kernel: [<c1a38e78>] rtc_read_alarm+0x3b8/0x490 [rtc_core]
192.168.178.1 14/10 15:16:51.854
<8>Oct 14 15:16:41 kernel: Kernel panic - not syncing: Fatal exception
192.168.178.1 14/10 15:16:51.855
<12>Oct 14 15:16:41 kernel: WARNING: use tffs in panic mode (minor 96)
192.168.178.1 14/10 15:16:51.856

 

[olistudent]

Ah, I see. Please select "remove chronyd" patch and build a new image.

Regards
Oliver

 

[Melchior]

Ah, I see. Please select "remove chronyd" patch and build a new image.

Regards
Oliver

No kernel panic anymore with ´remove chronyd´ patch.

Syslog:

<15>Jan 1 01:01:15 kernel: vcc_release(0,0) done.<7>vcc_release(0,0) done.<7>vcc_release(0,0) done.<7><7>vcc_connect(0,34) done.<7><6>kdsld_token_thread: start
192.168.178.1 14/10 22:21:26.753
<14>Jan 1 01:01:15 kernel: sch_llq: Sep 8 2011 15:32:44
192.168.178.1 14/10 22:21:26.991
<14>Jan 1 01:01:18 kernel: /proc/tffs: info request: success
192.168.178.1 14/10 22:21:29.624
<13>Jan 1 01:01:18 ONLINECHANGED[2945]: [online] approved
192.168.178.1 14/10 22:21:29.764
<13>Jan 1 01:01:18 ONLINECHANGED[2945]: [online] executing /etc/onlinechanged/00-get_ip
192.168.178.1 14/10 22:21:29.817
<13>Jan 1 01:01:18 ONLINECHANGED[2945]: [online] executing /etc/onlinechanged/send_crashreport
192.168.178.1 14/10 22:21:29.866
<13>Jan 1 01:01:19 ONLINECHANGED[2945]: [online] executing /etc/onlinechanged/webdav_net
192.168.178.1 14/10 22:21:30.958
<11>Oct 14 22:21:21 telefon[1605]: set initial telefon time from linux time to 22:21:21 14.10 2011!
192.168.178.1 14/10 22:21:31.641
<14>Oct 14 22:21:21 hostapd: ath0: STA *secret* WPA: group key handshake completed (RSN)
192.168.178.1 14/10 22:21:31.801
<13>Oct 14 22:21:22 ONLINECHANGED[2945]: [online] finished
192.168.178.1 14/10 22:21:32.392

Thank you.

 

[Melchior]

Now I try to utilize pptp. I have servername, username and password. (works in Windows 7)

this fails with the following lines in Freetz:

Starting pptp:

modprobe: module sha1_generic not found in modules.dep
modprobe: module ppp_generic not found in modules.dep
modprobe: module ppp_async not found in modules.dep
Starting pptp ... failed.

The checkboxes of these three modules are checked (by default): Advanced Options - Kernel Modules under crypto and drivers.

Syslog:

<29>Oct 14 22:32:01 pppd[3977]: pppd 2.4.5 started by root, uid 0
192.168.178.1 14/10 22:32:09.339
<13>Oct 14 22:32:01 pptp[3979]: anon log[mainptp.c:314]: The synchronous pptp option is NOT activated
192.168.178.1 14/10 22:32:09.345
<30>Oct 14 22:32:01 pppd[3977]: Using interface ppp0
192.168.178.1 14/10 22:32:09.382
<29>Oct 14 22:32:01 pppd[3977]: Connect: ppp0 <--> /dev/pts/0
192.168.178.1 14/10 22:32:09.383
<13>Oct 14 22:32:01 pptp[3986]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
192.168.178.1 14/10 22:32:09.445
<13>Oct 14 22:32:01 pptp[3986]: anon log[ctrlp_dispptp_ctrl.c:739]: Received Start Control Connection Reply
192.168.178.1 14/10 22:32:09.496
<13>Oct 14 22:32:01 pptp[3986]: anon log[ctrlp_dispptp_ctrl.c:773]: Client connection established.
192.168.178.1 14/10 22:32:09.498
<13>Oct 14 22:32:02 pptp[3986]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
192.168.178.1 14/10 22:32:10.447
<13>Oct 14 22:32:02 pptp[3986]: anon log[ctrlp_dispptp_ctrl.c:858]: Received Outgoing Call Reply.
192.168.178.1 14/10 22:32:10.502
<13>Oct 14 22:32:02 pptp[3986]: anon log[ctrlp_dispptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 34304).
192.168.178.1 14/10 22:32:10.504
<27>Oct 14 22:32:03 pppd[3977]: MPPE required, but MS-CHAP[v2] auth not performed.
192.168.178.1 14/10 22:32:11.105
<29>Oct 14 22:32:03 pppd[3977]: Connection terminated.
192.168.178.1 14/10 22:32:11.214
<12>Oct 14 22:32:03 pptp[3979]: anon warn[decaps_hdlcptp_gre.c:204]: short read (-1): Input/output error
192.168.178.1 14/10 22:32:11.239
<12>Oct 14 22:32:03 pptp[3979]: anon warn[decaps_hdlcptp_gre.c:216]: pppd may have shutdown, see pppd log
192.168.178.1 14/10 22:32:11.239
<30>Oct 14 22:32:03 pppd[3977]: Exit.
192.168.178.1 14/10 22:32:11.240
<13>Oct 14 22:32:03 pptp[3986]: anon log[callmgr_mainptp_callmgr.c:234]: Closing connection (unhandled)
192.168.178.1 14/10 22:32:11.243
<13>Oct 14 22:32:03 pptp[3986]: anon log[ctrlp_repptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'
192.168.178.1 14/10 22:32:11.243
<13>Oct 14 22:32:03 pptp[3986]: anon log[call_callbackptp_callmgr.c:79]: Closing connection (call state)
192.168.178.1 14/10 22:32:11.244

I read somewhere I should pass "refuse-eap" to pppd. Only my current security level won't allow me.

I can find out how to change the security level and enter this in the box on the pppd page.

Good idea?

 

[Melchior]

Deleted: double entry

 

[Melchior]

entering

refuse-eap

didn't work.

Still: The synchronous pptp option is NOT activated

 

[olistudent]

These Code is built into kernel and the errors of modprobe could be ignored. I don't know why pppd doesn't connect.

Regards
Oliver

 

[RalfFriedl]

If you bothered to provide i readable log, maybe someone would read it.

Außerdem schlage ich dafür einen getrennten Thread vor.

 

[Melchior]

Danke Oliver fuer dein Antwort.

Ich habe es nicht gewusst die log war nicht in ordnung. Wie soll ich das machen?

Getrennt? Ja, das ist vielleicht besser.