ADSL2+ und SMC7908 firmware problem

[Bonne]

Hello!

I have a problem with the upload speed with newest firmwares to SMC 7908BrB (on a SX541). When a flash/use my router with firmware 2.06 or higher I get a much lower upload speed compared to the upload speed I get while using firmware 2.05 or lower (600kb/s instead 1000kb/s). Is this a firmware bug, or do I have to change some of the ADSL settings? My ISP is NextGenTel (Norway).

Sie können gern in Deutsch antworten, weil ich am bischen Deutsch in die Schule gelernt habe.

 

[Flieger]

hi bonne,
welcome to the board

-please use the newest firmware 2.11 from the ftp-server
-post a screenshot of http://routerip/adsl_status.stm after one hour internet
-an wich ADSL-parameter do you use ?

 

[Bonne]

Here is screenshots of the adsl status and settings using 2.05 and 2.11
Could the problem be a result of my adsl splitter not fully supporting ADSL2+?

 

[Flieger]

interesting...

but i have no ADSL2

and the downstream of 2.11 is not so bad

greetings to norway

 

[Bonne]

I tried with a new adsl2+ splitter, and I have still same problem :noidea:
This must be a firmware bug.

 

[Bonne]

I have now tried the newest SX541 firmware and it has the same problem. The upload speed is only 657. I have to stick to SMC 2.05 firmware

 

[Bonne]

Problem solved. Upgrading to 2.12 + installing the new splitter again fixed it.

 

[Flieger]

Problem solved. Upgrading to 2.12 + installing the new splitter again fixed it.

nice to read it