Hallo, ich habe hier einen Asterisk 1.2.7.1-BRIstuffed-0.3.0-PRE-1o am laufen, dieser stürzt aber in unregelmässigen Abständen einfach ab.
Die letzt Info in den Logfiles des Asterisk ist folgende:
Leider hab ich keinen Plan was das bedeutet und im Netz ist zur letzten Zeile auch nichts brauchbares zufinden.
Hoffe irgendwer hat ne Idee woran es leigen könnte
mfg
Die letzt Info in den Logfiles des Asterisk ist folgende:
Aug 15 12:24:27 VERBOSE[13605] logger.c: -- Channel 0/1, span 1 received AOC-E charging 0 units
Aug 15 12:24:27 DEBUG[21986] channel.c: Didn't get a frame from channel: Zap/1-1
Aug 15 12:24:27 DEBUG[21986] channel.c: Bridge stops bridging channels Zap/4-1 and Zap/1-1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Set option AUDIO MODE, value: ON(1) on Zap/1-1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Hangup: channel: 1 index = 0, normal = 15, callwait = -1, thirdcall = -1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Not yet hungup... Calling hangup once with icause, and clearing call
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: disabled echo cancellation on channel 1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Set option TDD MODE, value: OFF(0) on Zap/1-1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Updated conferencing on 1, with 0 conference users
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on Zap/1-1
Aug 15 12:24:27 DEBUG[21986] chan_zap.c: disabled echo cancellation on channel 1
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Hungup 'Zap/1-1'
Aug 15 12:24:27 DEBUG[21986] app_dial.c: Exiting with DIALSTATUS=ANSWER.
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Executing Goto("Zap/4-1", "ds-ANSWER|1") in new stack
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Goto (macro-tsblcr,ds-ANSWER,1)
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Executing Goto("Zap/4-1", "end|1") in new stack
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Goto (macro-tsblcr,end,1)
Aug 15 12:24:27 DEBUG[21986] pbx.c: Expression result is '1'
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Executing GotoIf("Zap/4-1", "1?10") in new stack
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Goto (macro-tsblcr,end,10)
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Executing Goto("Zap/4-1", "restart|1") in new stack
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Goto (macro-tsblcr,restart,1)
Aug 15 12:24:27 VERBOSE[21986] logger.c: -- Executing Wait("Zap/4-1", "1.0") in new stack
Aug 15 12:24:28 DEBUG[13606] chan_zap.c: Received REMOTE_HOLD notification on NETWORK channel. Starting MoH
Leider hab ich keinen Plan was das bedeutet und im Netz ist zur letzten Zeile auch nichts brauchbares zufinden.
Hoffe irgendwer hat ne Idee woran es leigen könnte
mfg