Hallo Leute,
da ich noch nicht so alles verstehe frage ich lieber nach
Wenn ich nur einen Port an meiner ISDN-karte habe, ist es doch nicht ,möglich einen Anruf weiter zu leiten oder ? Da die verbindung doch dann immer besetzt ist ?!?!
Weil ich versuche das gerade und bekomme immer
hab ich damit recht, oder liegt das an mir oder an irgendwelchen einstellungen ?
gruß
heiko
da ich noch nicht so alles verstehe frage ich lieber nach
Wenn ich nur einen Port an meiner ISDN-karte habe, ist es doch nicht ,möglich einen Anruf weiter zu leiten oder ? Da die verbindung doch dann immer besetzt ist ?!?!
Weil ich versuche das gerade und bekomme immer
Code:
AGI Rx << EXEC DIAL misdn/1/18
-- AGI Script Executing Application: (DIAL) Options: (misdn/1/18)
P[ 1] channel with stid:0 for one second still in use!
P[ 0] --> * NEW CHANNEL dad:18 oad:(null)
P[ 1] * Queuing chan 0x81e8c48
P[ 1] read_config: Getting Config
P[ 1] --> TON: Unknown
P[ 1] --> LTON: Unknown
P[ 1] --> CTON: Unknown
P[ 1] * CALL: 1/18I>
P[ 1] --> * dad:29 tech:mISDN/0-u7 ctx:isdn_in
P[ 1] --> * adding2newbc ext 29
P[ 1] --> * adding2newbc callerid 21
P[ 1] --> pres: -1 screen: -1
P[ 1] --> pres: 0I>
P[ 1] --> PRES: Allowed (0x0)
P[ 1] --> SCREEN: Unscreened (0x0)
P[ 1] --> IMPORT_PID: importing pid:8
P[ 1] NO OPTS GIVEN>
P[ 1] I SEND:SETUP oad:21 dad:18 pid:9
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:0 l3id:30001 b_stid:0 layer_id:0
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> new_l3id 30002
P[ 1] Sending msg, prim:30580 addr:41000104 dinfo:30002
P[ 1] --> * SEND: State Dialing pid:9
-- Called 1/18I>
P[ 1] handle_frm: frm->addr:42000103 frm->prim:35a82
P[ 1] I IND :RELEASE_COMPLETE oad:21 dad:18 pid:9 state:CALLING
P[ 1] --> channel:255 mode:TE cause:1 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1] --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:0 l3id:30002 b_stid:0 layer_id:0
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> queue_hangup
P[ 1] * RELEASING CHANNEL pid:9 ctx:isdn_in dad:18 oad:29 state: CLEANING
P[ 1] --> * State Down
P[ 1] --> Setting AST State to down
P[ 1] $$$ CLEANUP CALLED pid:9
P[ 1] empty_chan_in_stack: cannot empty channel 255
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1] --> lib: RELEASE_CR Ind with l3id:30002
P[ 1] --> lib: CLEANING UP l3id: 30002
P[ 1] $$$ CLEANUP CALLED pid:9
== Everyone is busy/congested at this time (1:0/0/1)
hab ich damit recht, oder liegt das an mir oder an irgendwelchen einstellungen ?
gruß
heiko