Dropbear and vsftp in WAN interface

[vasila]

Hello,



Is possible to use dropbear and vsftp in the wan interface of my Fritz! 7270 ?
This is, if i run dropbear, i only can access using Putty (or other SSH client) in the LAN or wireless. However i want to reach my fritz from the outside.

I'm using the fritz without modem (LAN1 becomes the WAN interface).

Thank you.
Best regards


Valter

 

[olistudent]

Hi.
Sure this is possible. Therefor you have to setup a portforwarding onto the box.
This can either be done with Freetz Package virtual-ip-cgi or avm-firewall-cgi or by editing /var/flash/ar7.cfg directly.

Regards Oliver

 

[vasila]

Hi.
Sure this is possible. Therefor you have to setup a portforwarding onto the box.
This can either be done with Freetz Package virtual-ip-cgi or avm-firewall-cgi or by editing /var/flash/ar7.cfg directly.

Regards Oliver

Can you explain better??
Can i setup portforwarding in the AVM web interface ??
Thank you
Best Regards

 

[hermann72pb]

no, you can not setup the protforwarding using AVM WebIF. Oliver said you already: you need avm-firewall-cgi package, if you plan setup this portforwarding in WebGUI. You can also probe to use virtual-ip or edit directly ar7.cfg.

Best regards

 

[vasila]

Hello,

I have AVM-firewall and also virtualIP installed in my freetz image.
In the webGUI from AVM-firewall the port forwarding rules are the same as define in the AVM WebIF. Because of this i as if i can do it in the AVM WebIF

I have to setup a por forwarding to the fritz! itself ? Is this correct?

Thank you
Best regards