[Problem] [English]Connecting Siemens Homestation to Fritzbox 7360

[5HT2A]

Hello IPPF members and Siemens fans, I'm trying to bring to life a Siemens Homestation.

Scenario:
- German Fritzbox 7360 FW 6.01 with an analog phone connected to FON1 and internet cable connected to LAN1(no DSL). Alternatively, I could use a 7170 international edition.
- No fixed line, only a couple of voip account setup in FB
- Homestation with Siemens S35 or ME45 or MT50

Aim/Goal:
To Forward Calls: GSM<=>Voip.

What I did so far:
- Removed the RJ11 from the TAE-F-RJ11 cable that came with the HS and crimped an RJ45 to analog pins 3 and 6(on the FB side), original TAE connector for HS is crimped to pins 1 and 2(don't exactly know if this is an original HS cable or not)
- I connected the HS with the FB with the newly created cable.

Partial and interesting Results:

When calling the Siemens handy(CLIP is set up to DTMF or FSK, automatic doesn't fwd Clip):
- [Normal]Analog phone on FON1 rings as expected, up to 9 times and can take the call with no interruptions.
- [Normal]I get CLIP forwarded to the FB
- [Abnormal]FB recognises the HS as a 'festnetz' anschluss with 'Vorauswahl' *10#(the status for festnetz *10# turns green in FB menu)only during the gsm call, while calling the Siemens handy or while answering. After ending the call, the status for festnetz becomes inactive; same results when I tried with an original Y cable that had a TAE plug at one end.
- [Abnormal] Can't forward GSM<=>Voip.


Please help in getting this HS working.
I know it's easier to use a voip-capable 3G usb modem or a ZTE RL500 for this scenario(which I did), but I would like to combine vintage with modern technology, to prove for the new generation that vintage is still useful. :alt:

 

[Telefonmännchen]

- [Abnormal]FB recognises the HS as a 'festnetz' anschluss with 'Vorauswahl' *10#...

Thats right. You have connected the Homestation to the analogue input of the FritzBox. The prefix *10# is the internal name of this input and later you can select the Homestation-connection for outgoing calls by dialing *10# + phone number. For a automated selection via "Wahlregeln" (rules for outgoing calls) you can enter the 0000000000 for a call-by-call-provider and select this for outgoing mobile calls. Everytime you dial a mobile number the FritzBox uses the Homestation-connection automatically
For a proper function you have to activate this input as fixed line. You can enter a faked number or better the last digits of the connected mobile-number.

- [Abnormal] Can't forward GSM<=>Voip.

This should be possible after you have activated the fixed line. The FritzBox knows nothing about the connected Homestation in the current status. Thats the reason for this behavior and the reason why this connection is not available to forward incomming calls.

Gruß Telefonmännchen