- Mitglied seit
- 7 Okt 2006
- Beiträge
- 27
- Punkte für Reaktionen
- 0
- Punkte
- 0
Hallo,
ich habe gerade meine 7270 bekommen (mit 128MBit-Flash) - und diese gleich mal standesgemäß außer Gefecht gesetzt. Erste Versuche mit dem stable-Branch (normale Firmware 7270_04.59) gestern abend führten zu einer endlosen Boot-Schleife. Heute habe ich dann den Trunk ausprobiert (ebenfalls mit 7270_04.59 Firmware). Damit bootete die Kiste erst mal auf den ersten Blick normal, war aber im Netz weder unter der eingestellten noch unter der Default-IP zu sehen.
Also schnell den Lötkolben angeheizt um mal nachzusehen (siehe unten). Offenbar ist mit den Libs irgendwas schiefgegangen, alle möglichen Dienste beschweren sich über ein fehlendes Symbol '__fork'.
Was ist hier los und wie kann ich ohne Netzzugriff wieder Leben in die Kiste bringen?
Grüße,
Holger
PS.: Einstellungen im Menuconfig: 16MB, alle Pakete aus, keine Patches, sonst Default
ich habe gerade meine 7270 bekommen (mit 128MBit-Flash) - und diese gleich mal standesgemäß außer Gefecht gesetzt. Erste Versuche mit dem stable-Branch (normale Firmware 7270_04.59) gestern abend führten zu einer endlosen Boot-Schleife. Heute habe ich dann den Trunk ausprobiert (ebenfalls mit 7270_04.59 Firmware). Damit bootete die Kiste erst mal auf den ersten Blick normal, war aber im Netz weder unter der eingestellten noch unter der Default-IP zu sehen.
Also schnell den Lötkolben angeheizt um mal nachzusehen (siehe unten). Offenbar ist mit den Libs irgendwas schiefgegangen, alle möglichen Dienste beschweren sich über ein fehlendes Symbol '__fork'.
Was ist hier los und wie kann ich ohne Netzzugriff wieder Leben in die Kiste bringen?
Grüße,
Holger
PS.: Einstellungen im Menuconfig: 16MB, alle Pakete aus, keine Patches, sonst Default
Code:
(AVM) EVA Revision: 1.455 Version: 1455
(C) Copyright 2005 AVM Date: Apr 1 2008 Time: 13:07:03 (3) 2 0x0-0x41D
[FLASH:] SPANSION Uniform-MirrorBit-Flash 16MB 64 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 128 sectors a 128kB)
[SYSTEM:] UR8 on 360MHz/120MHz syncron
Eva_AVM >AVM decompress Kernel:
..........................executeProgram on 0x9429A000
[prom_init] 0
[prom_init] argv[0]=gocommand
[prom_init] 0
[prom_init] envp[0]= "HWRevision"="139.1.0.6"
[prom_init] envp[2]= "ProductID"="Fritz_Box_7270_16"
[prom_init] envp[4]= "SerialNumber"="0000000000000000"
[prom_init] envp[6]= "annex"="B"
[prom_init] envp[8]= "autoload"="yes"
[prom_init] envp[10]= "bootloaderVersion"="1.455"
[prom_init] envp[12]= "bootserport"="tty0"
[prom_init] envp[14]= "cpufrequency"="360000000"
[prom_init] envp[16]= "firstfreeaddress"="0x946BD89C"
[prom_init] envp[18]= "firmware_version"="avm"
[prom_init] envp[20]= "firmware_info"="54.04.59"
[prom_init] envp[22]= "flashsize"="0x01000000"
[prom_init] envp[24]= "jffs2_size"="126"
[prom_init] envp[26]= "maca"="00:1F:3F:BD:A1:B2"
[prom_init] envp[28]= "macb"="00:1F:3F:BD:A1:B3"
[prom_init] envp[30]= "macwlan"="00:1F:3F:A4:02:48"
[prom_init] envp[32]= "macdsl"="00:1F:3F:BD:A1:B4"
[prom_init] envp[34]= "memsize"="0x04000000"
[prom_init] envp[36]= "modetty0"="38400,n,8,1,hw"
[prom_init] envp[38]= "modetty1"="38400,n,8,1,hw"
[prom_init] envp[40]= "mtd0"="0x90000000,0x90000000"
[prom_init] envp[42]= "mtd1"="0x90020000,0x90F80000"
[prom_init] envp[44]= "mtd2"="0x90000000,0x90020000"
[prom_init] envp[46]= "mtd3"="0x90F80000,0x90FC0000"
[prom_init] envp[48]= "mtd4"="0x90FC0000,0x91000000"
[prom_init] envp[50]= "my_ipaddress"="192.168.2.1"
[prom_init] envp[52]= "prompt"="Eva_AVM"
[prom_init] envp[54]= "ptest"=""
[prom_init] envp[56]= "req_fullrate_freq"="120000000"
[prom_init] envp[58]= "sysfrequency"="120000000"
[prom_init] envp[60]= "urlader-version"="1455"
[prom_init] envp[62]= "usb_board_mac"="00:1F:3F:BD:A1:B5"
[prom_init] envp[64]= "usb_rndis_mac"="00:1F:3F:BD:A1:B6"
[prom_init] envp[66]= "usb_device_id"="0x5E00"
[prom_init] envp[68]= "usb_revision_id"="0x0200"
[prom_init] envp[70]= "usb_device_name"="USB DSL Device"
[prom_init] envp[72]= "usb_manufacturer_name"="AVM"
[prom_init] envp[74]= "wlan_key"="8354771415939103"
[prom_init] fw_arg3 0x94643c50
LINUX started...
flashsize=16 MByte
&_end=0x94311020 PFN_ALIGN(&_end)=0x94312000 CPHYSADDR(PFN_ALIGN(&_end))=0x14312000 memsize=0x4000000
Config serial console: console=ttyS0,38400n8r
[ur8_pre_init] System Clk = 60000000 Hz
(ur8_gpio_init)
ur8_clk_get_pll_factor: 300000000
ur8_get_pci_clock 30000000
(mips_reboot_setup)
plat_timer_setup TIMER IRQ: 7
Linux version 2.6.19.2 (1688M) (gcc version 3.4.6) #8 Fri Aug 29 11:39:04 CEST 2008
CPU revision is: 00019068
[ur8_pci_init]
[setup_pci_master]
[setup_pci_slave]
Exposing 67108864 memory over PCI
Setup Complete, Enabling PCI Interface
PCI Interface Running
PCI controller initialized
[ur8_vbus_set_prio] instance vbus_nwss_dma level 2 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_sar_pdsp level 2 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_buffer_manager level 2 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_usb level 5 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_vlynq level 7 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_pci level 5 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_c55 level 3 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_tdm level 0 escalator disabled (count 255, floor 7)
[ur8_vbus_set_prio] instance vbus_mips level 3 escalator disabled (count 255, floor 7)
Determined physical RAM map:
memory: 04000000 @ 14000000 (usable)
[init_bootmem]
[free_bootmem]
[reserve_bootmem]
[mem_map-hack]: reduce size from 3145728 524288 Bytes
[mem_map-hack]: move map base from 0x94315000 to 0x94095000
Built 1 zonelists. Total pages: 97536
Kernel command line: console=ttyS0,38400n8r
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 2048 (order: 11, 8192 bytes)
CPU frequency 360.00 MHz
Using 180.000 MHz high precision timer.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[free_all_bootmem]
Memory: 61440k/65536k available (2027k kernel code, 4060k reserved, 632k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
[ur8_mtd_init]
[ur8_mtd_init] flashsize = 0x01000000 Byte 16 MBytes
[ur8_mtd_init] mtd[0] = 0x90000000,0x90000000
[ur8_mtd_init] mtd[1] = 0x90020000,0x90F80000
[ur8_mtd_init] mtd[2] = 0x90000000,0x90020000
[ur8_mtd_init] mtd[3] = 0x90F80000,0x90FC0000
[ur8_mtd_init] mtd[4] = 0x90FC0000,0x91000000
[ur8_mtd_init] mtd[5] = 0x90000000,0x90000000
pcibios_read_config: accessing present PCI slot : 14, where 0, size 4
Master and Slave Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
squashfs: version 3.2 (2007/01/02) Phillip Lougher
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered (default)
avm_net_trace: Up and running.
[avm] configured: watchdog event debug led enable direct gpio
AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Aug 29 2008 11:36:27)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 15) is a UR8_UART
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
physmap platform flash device: 01000001 at 10000000
physmap-flash.1: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.1: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
[ur8_jffs2_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97d01c
[ur8_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)
[ur8_jffs2_parser_function] magic 20031985 found @pos 0x7a0000, size 8257536
[ur8_squashfs_parser_function] mtd_info->name physmap-flash.1 mtd_info->index 0 param=0 p_mtd_pat=0x97c
[ur8_squashfs_parser_function] *p_mtd_pat->name filesystem
[ur8_squashfs_parser_function] try partition kernel (offset 0x20000 len 16121856 blocksize=20000)
[ur8_squashfs_parser_function] magic found @pos 0xfd100
6 find_squashfs partitions found on MTD device physmap-flash.1
Creating 6 MTD partitions on "physmap-flash.1":
0x000fd100-0x00f80000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
[ur8_mtd_add_notifier] name rootfs
[ur8_mtd_add_notifier] use rootfs
[ur8_mtd_add_notifier] root device: /dev/mtdblock0 (rootfs)
0x00020000-0x000fd100 : "kernel"
mtd: partition "kernel" doesn't end on an erase block -- force read-only
[ur8_mtd_add_notifier] name kernel
[ur8_mtd_add_notifier] skip kernel
0x00000000-0x00020000 : "urlader"
[ur8_mtd_add_notifier] name urlader
[ur8_mtd_add_notifier] skip urlader
0x00f80000-0x00fc0000 : "tffs (1)"
[ur8_mtd_add_notifier] name tffs (1)
[ur8_mtd_add_notifier] skip tffs (1)
0x00fc0000-0x01000000 : "tffs (2)"
[ur8_mtd_add_notifier] name tffs (2)
[ur8_mtd_add_notifier] skip tffs (2)
0x007a0000-0x00f80000 : "jffs2"
[ur8_mtd_add_notifier] name jffs2
[ur8_mtd_add_notifier] skip jffs2
Generic platform RAM MTD, (c) 2004 Simtec Electronics
mtd-ram mtd-ram.2: no memory resource specified
[ur8_ram_mtd_set_rw] PLATRAM_RO
mtd-ram: probe of mtd-ram.2 failed with error -2
CAPI Subsystem Rev 1.1.2.8
TCP cubic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
MUSB UR8 pdev active!
PCI_STATUS_SET: 40000
PCI_STATUS_CLR: 40000
PCI_HOST_INT_EN: 0
PCI_HOST_INT_CLR: 0
PCI_BE_INT_En: 0
PCI_BE_INT_CLR: 0
[pci_int_init] done
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd3 and mtd4 (double buffering)
Adam2 environment variables API installed.
[avm_new] push_button_gpio=25 value=0 enabled
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 136k freed
[avm_led_gpio_bit_driver_init] gpio 1 pos 0 name power
[avm_led_gpio_bit_driver_init] gpio 9 pos 1 name internet
[avm_led_gpio_bit_driver_init] gpio 27 pos 2 name festnetz
[avm_led_gpio_bit_driver_init] gpio 28 pos 3 name wlan
[avm_led_gpio_bit_driver_init] gpio 17 pos 4 name info
[avm_led_gpio_bit_driver_init] gpio 35 pos 5 name rot1
[avm_led_gpio_bit_driver_init] gpio 36 pos 6 name rot2
[avm_led_gpio_bit_driver_init] gpio 32 pos 7 name rot3
[avm_led_gpio_bit_driver_init] gpio 22 pos 8 name rot4
3[avm_led_gpio_bit_driver_init] gpio 21 pos 9 name rot5
init started: BusyBox v1.11.3 (2008-11-13 11:17:36 CET)
rootdir=/
table='/etc/device.table'
AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
TFFS Name Table C
HWRevision 139.1.0.6
ProductID Fritz_Box_7270_16
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.455
bootserport tty0
cpufrequency 360000000
firstfreeaddress 0x946BD89C
firmware_version avm
firmware_info 54.04.59
flashsize 0x01000000
jffs2_size 126
maca 00:1F:3F:BD:A1:B2
macb 00:1F:3F:BD:A1:B3
macwlan 00:1F:3F:A4:02:48
macdsl 00:1F:3F:BD:A1:B4
memsize 0x04000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90020000,0x90F80000
mtd2 0x90000000,0x90020000
mtd3 0x90F80000,0x90FC0000
mtd4 0x90FC0000,0x91000000
my_ipaddress 192.168.2.1
prompt Eva_AVM
ptest
req_fullrate_freq 120000000
sysfrequency 120000000
urlader-version 1455
usb_board_mac 00:1F:3F:BD:A1:B5
usb_rndis_mac 00:1F:3F:BD:A1:B6
usb_device_id 0x5E00
usb_revision_id 0x0200
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 8354771415939103
mknod: /var/flash/ar7.cfg: File exists
Loading /var/flash/freetz...done.
Loading users, groups and passwords...done.
Loading hosts...done.
Loading config...done.
Loading modules...done.
Piglet_noemif: module license '
(C) Copyright 2007 by AVM
' taintskernel.
patch_dectfw: patch_adress: 645c max_len: 22 with Version 2 Len: 16
patch_dectfw: c0047000, datalen = 30299,
***********************************************************
dect_file_process: upload of '/lib/modules/dectfw_secondlevel.hex' successfull
[avm_new]push_button_ctrl: gpio=23 value=1 enabled
[avm_new]push_button_ctrl:'Taster_4': enable=2 gpio=23 regaddr=00000000 button_type=0
[piglet]bitfile '/lib/modules/microvoip_isdn_top.bit'
[avm_new]push_button 'Taster_4', released: GPIO=23 presses=0 key=button_key_10
[piglet] Read 169291 bytes total from file
[piglet]TDM: FS: 7990 Hz CLK:2047805 Hz
[jffs2] xx=mtd5: 007e0000 00020000 "jffs2"
[jffs2] i=mtd5:
[jffs2] jffs2_pat=5
[jffs2] i=007e0000
[jffs2] jffs2_size=126
[jffs2] i=00020000
[jffs2] i="jffs2"
[jffs2] load jffs2 module
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[jffs2] mount jffs
Empty flash at 0x007a04b0 ends at 0x007b0000
CLEANMARKER node found at 0x007b0000, not first node in block (0x007a0000)
[jffs2] write env variable jffs2_size to 126
TAM: create JFFS2 directory /data/tam
[avm_debug]redirect kernel-messages (/dev/debug)
[4294938393][DECTSTUB] {DspInit}
[4294938393][DECTSTUB] {dect_mon_init}
attempting to load DSL Firmware '/lib/modules/dsp_ur8/ur8-B-dsl.bin'
[4294938933][DECTSTUB] To IRC case 4 : slot 0x2, from state 0x8
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
[dsl_ur8] DDC_cpsarChOpen done:0: Ch=15, Dir=TX
[dsl_ur8] DDC_cpsarChOpen done:0: Ch=15, Dir=RX
[dsl_ur8] driver version: 3.02.00.00
[dsl_ur8] datapump path (/lib/modules/dsp_ur8/ur8-B-dsl.bin)
[dsl_ur8] DSP binary filesize = 417174 bytes
[dsl_ur8] shim_osLoadFWImage: Completed
[dsl_ur8] DSP image page address: (97600000)
[dsl_ur8] dslhal_support_hostDspCodeDownload: Done. Datapump version: 01.52.26.01
[dsl_ur8] DDC_dsl_init: Done
[dsl_ur8] DDC_atm_init: Done priv = 979F8000
[dsl_ur8] DDA_atm_irq_request: SAR Interrupt registered
[dsl_ur8] DDA_atm_irq_request: DSL Interrupt registered
[dsl_ur8] Loading Linux DSL Driver done
[dsl_ur8] AVM Datapump
[pcmlink] driver init
[4294939374][pcmlinkfile] register_chrdev_region()
[4294939374][pcmlinkfile] major 245 (success)
[4294939416][isdn]svn:2394
driver params overwritten io_addr=0x0 irq_num=0
[4294939416]CPU-Clk: 180 * 2 MHz
[pcmlink_ul]workaround_regfailure: addr= 40 1100000 0
[pcmlink_ul]workaround_regfailure: addr= 48 1100000 0
[4294939514]PCMLINK: Version 4.532 Slots=13 BChan=11(Analog=3) DChan=2 Fifo=128 Bitfile: 0 16KHz-Chans
capicodec_init()
[capi_codec] support fax
[capi_codec] support Codecs
avm_dect driver init
[DECTDRV] [avm_dect]:(success)
[DECTDRV] [avm_dect]avm_dect_thread: start
[DECTDRV] dect_os_init
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x03
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x04
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x05
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x01
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x10
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x14
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x06
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x0D
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x21
[DECTDRV] pcm_TaskInit
[DECTDRV] dect_os_init: InitFunc called for TaskId 0x22
[dect_uicp_file_init] init()
[4294939782][DCTDRV] (RFPI_REQ) UI_TASK->FP_CCF_TASK
[4294939785][DCTDRV] (RFPI_CFM) FP_CCF_TASK->UI_TASK
[4294939786][DCTDRV] (STUB_FP_CAP_IND) FP_CCF_TASK->UI_TASK
[4294939786][DECTDRV] CAP_IND, RFPI is: 01 27 94 FA A0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
musb_hdrc: version 2.2a/db-0.5.1, cppi-dma, host, debug=0
musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
musb_hdrc: MHDRC RTL version 1.500
musb_hdrc: setup fifo_mode 2
musb_hdrc: 7/9 max ep, 2624/4096 memory
musb_hdrc: hw_ep 0shared, max 64
musb_hdrc: hw_ep 1tx, max 512
musb_hdrc: hw_ep 1rx, max 512
musb_hdrc: hw_ep 2tx, max 512
musb_hdrc: hw_ep 2rx, max 512
musb_hdrc: hw_ep 3shared, max 256
musb_hdrc: hw_ep 4shared, max 256
musb_hdrc: USB Host mode controller at A3400000 using DMA, IRQ 39
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
TI USB 2.0 Host started
kdsldmod: init start (Aug 11 2008 15:11:54) sizeof(struct sk_buff)=168
kdsldmod: init done
<6>kdsld: PPP led: off (value=0)
Jan 1 01:00:29 ctlmgr[410]: process priority is 19
/usr/bin/avm/ctlmgr: can't resolve symbol '__fork'
avmEEPROM: reading calibration data
avmEEPROM: got calibration data version: 2
avmEEPROM, eeprom uses mac addr: 00:1F:3F:A4:02:48
EEPROM: offset=0x200, length=0xCB8(65C), setting checksum to: E103
avmEEPROM loaded @C01A5000
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_hal: 0.9.14.25 (AR5416, DEBUG)
wlan: 0.8.4.2 (Atheros/multi-bss)
Registered for AVM event source.
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
cache line size: 16
ar5416AttachHwPlatform: AR_EMU is set
in ar5416HwAttach
in ar5416ChipTest
Chan Freq RegPwr HT CTL CTL_U CTL_L DFS
1 2412n 20 HT20 1 0 1 N
1 2412n 20 HT40 1 0 1 N
2 2417n 20 HT40 1 0 1 N
3 2422n 20 HT40 1 1 1 N
4 2427n 20 HT40 1 1 1 N
5 2432n 20 HT40 1 1 1 N
6 2437n 20 HT40 1 1 1 N
7 2442n 20 HT40 1 1 1 N
8 2447n 20 HT40 1 1 1 N
9 2452n 20 HT40 1 1 1 N
10 2457n 20 HT40 1 1 1 N
11 2462n 20 HT40 1 1 1 N
12 2467n 20 HT40 1 1 0 N
13 2472n 20 HT40 1 1 0 N
36 5180n 30 HT20 1 0 1 N
38 5190n 20 HT40 1 0 0 N
40 5200n 30 HT20 1 1 0 N
44 5220n 30 HT20 1 0 1 N
46 5230n 20 HT40 1 0 0 N
48 5240n 30 HT20 1 1 0 N
52 5260n 20 HT20 1 0 1 Y
54 5270n 20 HT40 1 0 0 Y
56 5280n 20 HT20 1 1 0 Y
60 5300n 20 HT20 1 0 1 Y
62 5310n 20 HT40 1 0 0 Y
64 5320n 20 HT20 1 1 0 Y
100 5500n 27 HT20 1 0 1 Y
102 5510n 27 HT40 1 0 0 Y
104 5520n 27 HT20 1 1 0 Y
108 5540n 27 HT20 1 0 1 Y
110 5550n 27 HT40 1 0 0 Y
112 5560n 27 HT20 1 1 0 Y
116 5580n 27 HT20 1 0 1 Y
118 5590n 27 HT40 1 0 0 Y
120 5600n 27 HT20 1 1 0 Y
124 5620n 27 HT20 1 0 1 Y
126 5630n 27 HT40 1 0 0 Y
128 5640n 27 HT20 1 1 0 Y
132 5660n 27 HT20 1 0 1 Y
134 5670n 27 HT40 1 0 0 Y
136 5680n 27 HT20 1 1 0 Y
140 5700n 27 HT20 1 0 0 Y
avmEEPROM: register_simple_config_callback called
wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
wifi0: mac 13.2 phy 8.1 radio 12.0
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Use hw queue 7 for UAPSD
wifi0: Atheros 5416 PCI: mem=0x40000000, irq=80 hw_base=0xC0340000
wlan: mac acl policy registered
ath0: setting tx_chainmask to 5
ath0: setting rx_chainmask to 7
libwlanparam: config ok(1)
Invalid command : fmini_sns_on
Invalid command : fmini_mac
Configuration file: /var/tmp/hostapd.conf
libwlanparam: config ok(1)
Using WPA/WPA2 passphrase from flash.
hostapd: can't resolve symbol '__fork'
/etc/init.d/rc.net: line 394: websrv: not found
igdd: can't resolve symbol '__fork'
Jan 1 01:00:39 multid[567]: startup ($Revision: 1.140 $$CompileDate: Aug 11 2008 15:10:55 $)
multid: can't resolve symbol '__fork'
Jan 1 01:01:00 dsld[589]: startup (Aug 11 2008 15:11:04)
Jan 1 01:01:00 dsld[589]: new cpmac driver detected
dsld: can't resolve symbol '__fork'
Jan 1 01:01:00 telefon[593]: use clock_gettime(CLOCK_MONOTONIC)!
Jan 1 01:01:00 telefon[593]: SIGCHLD received!
Jan 1 01:01:00 telefon[593]: WARNING No config file '/var/flash/fx_def' !
[4294943380]FPGALink_SuspendResume: resume
voipd: can't resolve symbol '__fork'
Jan 1 01:01:01 telefon[597]: SIGCHLD received!
create sema UPNPAPI_DATA_phonebook
/etc/init.d/rc.S: line 1306: /etc/init.d/rc.media: not found
run_clock demon started
AVM_WATCHDOG: System Init UEberwachung abgeschlossen (180710 ms noch verfuegbar)
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0W
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0W
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 muW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=100 mul=84 diW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 divW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 divW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 dW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 divW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=536871139W
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=0 mul=0 div=1 W
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 W
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 dW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 divW
[avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=8 mul=29 W
SysRq : Changing Loglevel
Loglevel set to 4
Info: have to stop cat /dev/debug.
rc.mod version freetz-devel-2727
crond is disabled
telnetd is disabled
Starting webinterface...done.
swap is disabled
Please press Enter to activate this console.
BusyBox v1.11.3 (2008-11-13 11:17:36 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
ermittle die aktuelle TTY
tty is "/dev/ttyS0"
Serielles Terminal
Default password detected. Please enter a new password for 'root'.
Changing password for root
New password:[4294966456][DECTSTUB] To IRC case 4 : slot 0x4, from state 0x8
cat: read error: Broken pipe
