.titleBar { margin-bottom: 5px!important; }

Massive data transfer = reboot ?

Dieses Thema im Forum "Freetz" wurde erstellt von vasila, 10 Nov. 2008.

  1. vasila

    vasila Neuer User

    Registriert seit:
    7 Mai 2008
    Beiträge:
    102
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Hello,


    I'm using freetz version 54.04.63freetz-devel-2670M , and if i make a massive data transfer from a NTFS disk connected to the fritz USB to a NAS drive connected to ethernet LAN of the fritz, the box, after some time makes a reboot !!

    The data transfer is made with a synchronization software (2BrightSparks SyncBack). The software is installed on a PC connected via wireless to the box.
    In the PC i make Network drives (X: for the USB connected to fritz and Z: for NAS drive) and make the transfer.

    It is possible to have a log of the system??
    What can cause the problem?

    Thanks in advance
    Best regards
     
  2. vasila

    vasila Neuer User

    Registriert seit:
    7 Mai 2008
    Beiträge:
    102
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    #2 vasila, 10 Nov. 2008
    Zuletzt von einem Moderator bearbeitet: 10 Nov. 2008
    Ok..... I found a log of syslog.
    Here it is:
    Code:
    Jan  1 00:01:09 fritz daemon.info chronyd[1251]: Linux kernel major=2 minor=6 patch=19
    Jan  1 00:01:09 fritz daemon.info chronyd[1251]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
    Jan  1 00:01:09 fritz daemon.err chronyd[1251]: Could not open /dev/rtc, No such file or directory
    Jan  1 00:01:09 fritz daemon.err chronyd[1251]: Real time clock not supported on this operating system
    Jan  1 00:01:10 fritz daemon.info chronyd[1251]: System's initial offset : 279589573.618398 seconds slow of true (step)
    Nov  9 23:47:24 fritz user.err telefon[1108]: set initial telefon time from linux time to 23:47 9.11 2008!
    Nov  9 23:47:24 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
    Nov  9 23:47:25 fritz user.err usermand[1030]: /var/flash/user.cfg: is empty
    Nov  9 23:47:25 fritz user.err usermand[1030]: load_config(user): factory default loaded
    Nov  9 23:47:25 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:47:25 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:47:25 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
    Nov  9 23:47:26 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
    Nov  9 23:47:27 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:47:39 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:47:39 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:47:41 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:48:05 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:48:05 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:48:07 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:48:55 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:48:55 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:48:59 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 189): Invalid or incomplete multibyte or wide character
    Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 968): Invalid or incomplete multibyte or wide character
    Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 3105): Invalid or incomplete multibyte or wide character
    Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2493): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:12 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 6219): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:35 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:50:35 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:50:37 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2223): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2224): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2225): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2226): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2227): Invalid or incomplete multibyte or wide character
    Nov  9 23:50:50 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 5955): Invalid or incomplete multibyte or wide character
    Nov  9 23:53:49 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
    Nov  9 23:53:49 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:53:51 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
    Nov  9 23:55:59 fritz user.info eventadd[1978]: EVENT(132): USB-Gerät 007 abgezogen
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Error reading $Mft record(s): Input/output error
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_mft_record_read failed: Input/output error
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Error reading $Mft record(s): Input/output error
    Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_mft_record_read failed: Input/output error
    [B]Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Unmounting /dev/sda1 (New Volume)
    Nov  9 23:55:59 fritz user.info eventadd[1996]: EVENT(141): uStor01 entfernt[/B]
    Nov  9 23:57:16 fritz user.err usermand[1030]: 0.0.0.0:2932: connect to 192.168.178.23:14013 failed - No route to host (148)
    Nov  9 23:57:41 fritz user.err usermand[1030]: 0.0.0.0:4307: connect to 192.168.178.23:14013 failed - No route to host (148)
    Nov  9 23:58:20 fritz user.err usermand[1030]: 0.0.0.0:3479: connect to 192.168.178.23:14013 failed - No route to host (148)
    Nov  9 23:59:58 fritz user.err igdd[1012]: 0.0.0.0:2749: connect to 192.168.178.23:49001 failed - No route to host (148)
    

    In bold you can find the error.... Seems to be an USB NTFS error.
    Any help?
    Thank you
    Best Regards
     
  3. Silent-Tears

    Silent-Tears IPPF-Promi

    Registriert seit:
    3 Aug. 2007
    Beiträge:
    7,456
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Ort:
    BI
    You got it. Its a filesystem error, nothing to do with freetz. Stick your harddisk to your desktop-pc and fs-check the partion(s) on the drive.
     
  4. RalfFriedl

    RalfFriedl IPPF-Urgestein

    Registriert seit:
    22 Apr. 2007
    Beiträge:
    12,343
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Actually, it's an USB error and not an NTFS error.
    The USB layer thinks that the device is disconnected, and therefor further access to the device fails.
    I had similar problems with some USB devices.
     
  5. cuma

    cuma Aktives Mitglied

    Registriert seit:
    16 Dez. 2006
    Beiträge:
    2,735
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    Will the device be mounted after such error with another name? How has you enabled this debug log?
     
  6. vasila

    vasila Neuer User

    Registriert seit:
    7 Mai 2008
    Beiträge:
    102
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    After the error the device is mounted with the same name since the box reboots.

    This log is taken with SysLog installed with the freetz firmware.

    Best Regards