Massive data transfer = reboot ?

[vasila]

Hello,


I'm using freetz version 54.04.63freetz-devel-2670M , and if i make a massive data transfer from a NTFS disk connected to the fritz USB to a NAS drive connected to ethernet LAN of the fritz, the box, after some time makes a reboot !!

The data transfer is made with a synchronization software (2BrightSparks SyncBack). The software is installed on a PC connected via wireless to the box.
In the PC i make Network drives (X: for the USB connected to fritz and Z: for NAS drive) and make the transfer.

It is possible to have a log of the system??
What can cause the problem?

Thanks in advance
Best regards

 

[vasila]

Ok..... I found a log of syslog.
Here it is:

Jan  1 00:01:09 fritz daemon.info chronyd[1251]: Linux kernel major=2 minor=6 patch=19
Jan  1 00:01:09 fritz daemon.info chronyd[1251]: calculated_freq_scale=0.99902439 freq_scale=0.99902439
Jan  1 00:01:09 fritz daemon.err chronyd[1251]: Could not open /dev/rtc, No such file or directory
Jan  1 00:01:09 fritz daemon.err chronyd[1251]: Real time clock not supported on this operating system
Jan  1 00:01:10 fritz daemon.info chronyd[1251]: System's initial offset : 279589573.618398 seconds slow of true (step)
Nov  9 23:47:24 fritz user.err telefon[1108]: set initial telefon time from linux time to 23:47 9.11 2008!
Nov  9 23:47:24 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
Nov  9 23:47:25 fritz user.err usermand[1030]: /var/flash/user.cfg: is empty
Nov  9 23:47:25 fritz user.err usermand[1030]: load_config(user): factory default loaded
Nov  9 23:47:25 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:47:25 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:47:25 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
Nov  9 23:47:26 fritz daemon.warn chronyd[1251]: Could not send to 193.65.58.57 : Bad file descriptor
Nov  9 23:47:27 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:47:39 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:47:39 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:47:41 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:48:05 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:48:05 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:48:07 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:48:55 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:48:55 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:48:59 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 189): Invalid or incomplete multibyte or wide character
Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 968): Invalid or incomplete multibyte or wide character
Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 3105): Invalid or incomplete multibyte or wide character
Nov  9 23:49:07 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2493): Invalid or incomplete multibyte or wide character
Nov  9 23:50:12 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 6219): Invalid or incomplete multibyte or wide character
Nov  9 23:50:35 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:50:35 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:50:37 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2223): Invalid or incomplete multibyte or wide character
Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2224): Invalid or incomplete multibyte or wide character
Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2225): Invalid or incomplete multibyte or wide character
Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2226): Invalid or incomplete multibyte or wide character
Nov  9 23:50:42 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 2227): Invalid or incomplete multibyte or wide character
Nov  9 23:50:50 fritz daemon.notice ntfs-3g[1085]: Skipping unrepresentable filename (inode 5955): Invalid or incomplete multibyte or wide character
Nov  9 23:53:49 fritz user.err ctlmgr[629]: ctlmgr: plugin_install()
Nov  9 23:53:49 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:53:51 fritz user.err ctlmgr[629]: ctlmgr: plugin_installer: plugin not found yet. further installation needed!
Nov  9 23:55:59 fritz user.info eventadd[1978]: EVENT(132): USB-Gerät 007 abgezogen
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Error reading $Mft record(s): Input/output error
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_mft_record_read failed: Input/output error
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Error reading $Mft record(s): Input/output error
Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: ntfs_mft_record_read failed: Input/output error
[B]Nov  9 23:55:59 fritz daemon.notice ntfs-3g[1085]: Unmounting /dev/sda1 (New Volume)
Nov  9 23:55:59 fritz user.info eventadd[1996]: EVENT(141): uStor01 entfernt[/B]
Nov  9 23:57:16 fritz user.err usermand[1030]: 0.0.0.0:2932: connect to 192.168.178.23:14013 failed - No route to host (148)
Nov  9 23:57:41 fritz user.err usermand[1030]: 0.0.0.0:4307: connect to 192.168.178.23:14013 failed - No route to host (148)
Nov  9 23:58:20 fritz user.err usermand[1030]: 0.0.0.0:3479: connect to 192.168.178.23:14013 failed - No route to host (148)
Nov  9 23:59:58 fritz user.err igdd[1012]: 0.0.0.0:2749: connect to 192.168.178.23:49001 failed - No route to host (148)

In bold you can find the error.... Seems to be an USB NTFS error.
Any help?
Thank you
Best Regards

 

[Silent-Tears]

You got it. Its a filesystem error, nothing to do with freetz. Stick your harddisk to your desktop-pc and fs-check the partion(s) on the drive.

 

[RalfFriedl]

Actually, it's an USB error and not an NTFS error.
The USB layer thinks that the device is disconnected, and therefor further access to the device fails.
I had similar problems with some USB devices.

 

[cuma]

Will the device be mounted after such error with another name? How has you enabled this debug log?

 

[vasila]

After the error the device is mounted with the same name since the box reboots.

This log is taken with SysLog installed with the freetz firmware.

Best Regards