- Mitglied seit
- 22 Aug 2004
- Beiträge
- 2,028
- Punkte für Reaktionen
- 0
- Punkte
- 36
hallo,
ich habe das problem, das is mit asterisk keine Gespräche die über ISDN ankommen annehmen kann. Meine Konfiguration:
Asterisk mit FritzPCI an internen S0-Bus der Telefonanlage
neuste Version von chan_capi
Asteriskversion 1.0
capi.conf
Beim anrufen des "Asteriskservers" bekomme ich folgende Meldung
capi debug:
Ich hoffe Ihr hab eine Idee wo mein Fehler liegt. DANKE
P.S.: Über Asterisk ins ISDN Netz funktioniert problemlos
ich habe das problem, das is mit asterisk keine Gespräche die über ISDN ankommen annehmen kann. Meine Konfiguration:
Asterisk mit FritzPCI an internen S0-Bus der Telefonanlage
neuste Version von chan_capi
Asteriskversion 1.0
capi.conf
Code:
;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
msn=20,26,44
incominmsn=*
;mode=immediate
controller=1
softdtmf=1
accountcode=
context=pstn
devices=2
Beim anrufen des "Asteriskservers" bekomme ich folgende Meldung
capi debug:
Code:
CAPI Debugging Enabled
-- CONNECT_IND ID=004 #0x6935 LEN=0033
Controller/PLCI/NCCI = 0x101
CIPValue = 0x4
CalledPartyNumber = <81>26
CallingPartyNumber = A<80>13
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <90 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
Oct 27 19:45:43 NOTICE[1085459376]: chan_capi.c:1932 capi_handle_msg: CONNECT_IND ID=004 #0x6935 LEN=0033
Controller/PLCI/NCCI = 0x101
CIPValue = 0x4
CalledPartyNumber = <81>26
CallingPartyNumber = A<80>13
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <90 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
== CONNECT_IND (PLCI=0x101,DID=26,CID=13,CIP=0x4,CONTROLLER=0x1)
Oct 27 19:45:43 ERROR[1085459376]: chan_capi.c:2051 capi_handle_msg: did not find device for msn = 26
-- INFO_IND ID=004 #0x6936 LEN=0017
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x1e
InfoElement = <81 83>
-- INFO_IND ID=004 #0x6936 LEN=0017
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x1e
InfoElement = <81 83>
Oct 27 19:45:43 ERROR[1085459376]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x101 MN = 0x6936
Oct 27 19:45:43 NOTICE[1085459376]: chan_capi.c:1302 pipe_msg: INFO_IND ID=004 #0x6936 LEN=0017
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x1e
InfoElement = <81 83>
-- INFO_IND ID=004 #0x6937 LEN=0018
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <81>26
-- INFO_IND ID=004 #0x6937 LEN=0018
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <81>26
Oct 27 19:45:43 ERROR[1085459376]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x101 MN = 0x6937
Oct 27 19:45:43 NOTICE[1085459376]: chan_capi.c:1302 pipe_msg: INFO_IND ID=004 #0x6937 LEN=0018
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <81>26
-- INFO_IND ID=004 #0x6938 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
-- INFO_IND ID=004 #0x6938 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
Oct 27 19:45:43 ERROR[1085459376]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x101 MN = 0x6938
Oct 27 19:45:43 NOTICE[1085459376]: chan_capi.c:1302 pipe_msg: INFO_IND ID=004 #0x6938 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
-- DISCONNECT_IND ID=004 #0x693d LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x0
== DISCONNECT_IND PLCI=0x101 REASON=0
Oct 27 19:45:43 ERROR[1085459376]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x101 MN = 0x693d
Ich hoffe Ihr hab eine Idee wo mein Fehler liegt. DANKE
P.S.: Über Asterisk ins ISDN Netz funktioniert problemlos