Different display of time and date on two handsets Gigaset S810H.

zexoni70

Neuer User
Mitglied seit
11 Mrz 2017
Beiträge
39
Punkte für Reaktionen
5
Punkte
8
Respect for everyone,
I have five handsets of the Gigaset S810H and the base unit of the Gigaset GO-Box 100, and it only happens that on one of the handsets it's strange to show the time and date in a different format.

Attached are the pictures where in Figures 1 and 2 it shows the correct format on the four headphones, while in Figures 3 and 4 it shows the format only on one handset

Can you adjust somewhere in the settings so that on that one handset, it shows the date format like the other four handsets?1.jpg 2.jpg 3.jpg 4.jpg
 

MuP

IPPF-Urgestein
Mitglied seit
27 Mrz 2009
Beiträge
12,257
Punkte für Reaktionen
519
Punkte
113
*#87# > AM/PM
*#38# > 24h
 

zexoni70

Neuer User
Mitglied seit
11 Mrz 2017
Beiträge
39
Punkte für Reaktionen
5
Punkte
8
*#87# > AM/PM
*#38# > 24h
Dear MUP,
Nothing happens when I type the codes * # 87 #> AM / PM and
* # 38 #> 24h
I tried to enter the settings and then type the codes, but nothing is happening!
Are you sure that these codes are for the S810H?
Best regards.
 

Joe_57

IPPF-Promi
Mitglied seit
5 Mrz 2006
Beiträge
5,699
Punkte für Reaktionen
116
Punkte
63
I think, you have to press the [Menu]-Button before entering the sequences...
[Menu]*#87#[OK]
 

zexoni70

Neuer User
Mitglied seit
11 Mrz 2017
Beiträge
39
Punkte für Reaktionen
5
Punkte
8
I think, you have to press the [Menu]-Button before entering the sequences...
Of course I press the menu button and then I type codes, but nothing happens! :(

I would ask someone who owns the S810H to try to see if they are doing the codes?
 

MuP

IPPF-Urgestein
Mitglied seit
27 Mrz 2009
Beiträge
12,257
Punkte für Reaktionen
519
Punkte
113
the codes work here for my SL750H in a perfect way

don't press ok
"saved" should be the message after typing the codes
then go back by pressing the red button

firmwares are already updated for GOBox and S810H both?
 

zexoni70

Neuer User
Mitglied seit
11 Mrz 2017
Beiträge
39
Punkte für Reaktionen
5
Punkte
8
the codes work here for my SL750H in a perfect way

don't press ok
"saved" should be the message after typing the codes
then go back by pressing the red button

firmwares are already updated for GOBox and S810H both?
Both in the headset and the base, the last firmware have been loaded.

I did everything as you said, but it's not going to happen (it will not change the format of the date and time)

GO-Box 100 firmware.jpg S810H firmware.jpg
 

zexoni70

Neuer User
Mitglied seit
11 Mrz 2017
Beiträge
39
Punkte für Reaktionen
5
Punkte
8
My apologies,

I mixed the headphones that were side by side so I took the wrong one and looked at it and the codes of course changed the date and time format from the correct to the wrong one! :)!

Now everything works with these codes!

Thanks MuP
 
  • Like
Reaktionen: MuP

MuP

IPPF-Urgestein
Mitglied seit
27 Mrz 2009
Beiträge
12,257
Punkte für Reaktionen
519
Punkte
113
nice, thanks!

for other users:
type only this in the menu's first entry
*#38#
then the message should appear immediately
if not so, the special functionalities were not implemented in the versioned firmware, may be it's outdated
 
Zuletzt bearbeitet:
3CX

Statistik des Forums

Themen
235,334
Beiträge
2,059,474
Mitglieder
355,968
Neuestes Mitglied
Bilderpaul