Hi guys, i've found your forum when i try to create a circuit to interface with a Pirelli NetGate VoIP V2, that is most similar to Siemens SX541 (same processor, voip chipset and flash)..
i've found the great guide of JOCKYW2001, and try to connet via serial to this router but i don't have any result..
the board of router is this:
and the J4 seems to be the connector (10 Pin) of serial interface, i've used an older interface for SpeedTouch Home (with MAX232) but in Hyperterminal i don't get anything..
can anyone help me?
Another thing: i've checked with a multimeter the pin 2,3 and 5, the five seems to be ground, 2 and 3 reports a voltage of 3-4volt
sorry for my bad english, i'm italian
thanks a lot!
i've found the great guide of JOCKYW2001, and try to connet via serial to this router but i don't have any result..
the board of router is this:
and the J4 seems to be the connector (10 Pin) of serial interface, i've used an older interface for SpeedTouch Home (with MAX232) but in Hyperterminal i don't get anything..
can anyone help me?
Another thing: i've checked with a multimeter the pin 2,3 and 5, the five seems to be ground, 2 and 3 reports a voltage of 3-4volt
sorry for my bad english, i'm italian
thanks a lot!